Export limit exceeded: 426306 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.

Search

Search Results (426306 CVEs found)

CVE Vendors Products Updated CVSS v3.1
CVE-2026-93673 2026-11-16 4.8 Medium
The Zephyr WebSocket client validates the server's handshake response in on_header_value() in subsys/net/lib/websocket/websocket.c. The comparison was performed as strncmp(at, str, length), where length is the length of the value the server sent rather than the length of the expected value, so the check only asked whether the received value was a prefix of the expected base64(SHA-1(key || GUID)). A server that returned a handful of correct characters passed, and a response carrying an empty Sec-WebSocket-Accept: header caused strncmp() to be called with a count of zero, which returns 0 and set ctx->sec_accept_ok with no comparison performed at all. The header-value callback also cleared ctx->sec_accept_present after the first chunk, so a value split across receive-buffer boundaries was only ever examined in part. ctx->sec_accept_ok is the sole WebSocket-specific gate in websocket_connect(); the client does not check the HTTP status code or the Upgrade:/Connection: headers. Any HTTP response containing an empty or prefix-matching Sec-WebSocket-Accept header therefore completed the handshake, after which the socket is finalized as a WebSocket and all further peer bytes are parsed as frames. The affected path is driven directly by remote input through subsys/net/lib/http/http_parser.c, and is reached by every user of websocket_connect(), including MQTT over WebSocket (subsys/net/lib/mqtt/mqtt_transport_websocket.c) and subsys/net/lib/ocpp/ocpp.c. The Sec-WebSocket-Accept exchange is not a secret-based authentication -- an endpoint or on-path attacker that sees the request can compute the expected value -- so the impact is bounded to parties that never observed the handshake request: a caching or transparent intermediary replaying a canned response, an off-path attacker injecting a spoofed response, or a non-WebSocket endpoint the client was induced to talk to. For those, the per-connection binding that RFC 6455 requires the client to enforce provided no protection at all, letting a single crafted response convince the device it holds a live WebSocket session and causing it to send application data to, and accept frames from, an unverified peer. There is no memory-safety consequence. The fix compares each delivered chunk against the expected value at the position reached so far, refuses a chunk that would overrun it, and accepts only once every byte of the expected value -- and no more -- has been matched; on_header_field() now also clears the flag for any other header so a partial value cannot be continued across an intervening header.
CVE-2026-93672 2026-11-16 5.3 Medium
bt_att_find_req_by_user_data() in subsys/bluetooth/host/att.c walks every ATT channel attached to a connection and dereferences chan->req->user_data without checking chan->req. An ATT channel with no client request in flight holds chan->req == NULL — that is its normal idle state, set by att_handle_rsp() when a response resolves the transaction and tested by att_req_send_process() to pick a free channel — so the lookup reads through a NULL pointer as soon as it visits an idle channel. Every other chan->req user in the file already guards the pointer. The lookup is reached from the public bt_gatt_cancel() API and, more importantly, from the host itself: bt_gatt_unsubscribe() calls bt_gatt_cancel() while a subscribe CCC write is still outstanding (BT_GATT_SUBSCRIBE_FLAG_WRITE_PENDING), and call_notify_cb_and_maybe_unsubscribe() in subsys/bluetooth/host/gatt.c invokes bt_gatt_unsubscribe() from the RX path whenever an application notify callback returns BT_GATT_ITER_STOP. A malicious or malfunctioning peer can hold the trigger window open by withholding the ATT Write Response to the CCC write and then sending a notification for the subscribed handle. With CONFIG_BT_EATT the traversal is very likely to meet an idle sibling channel, since ATT channels are prepended to the list and a channel opened after the pending request was sent is visited first. The dereference is a read of a small constant offset from address zero, so the impact is availability only: no memory corruption, no attacker-chosen address and no information disclosure. On platforms and configurations where a near-NULL read traps — TrustZone non-secure images, MMU targets, native_sim, or builds with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_MPU/_DWT — the fault occurs in the Bluetooth RX context and results in a fatal error and device reset. On a plain Cortex-M build with the vector table mapped at address 0 and null-pointer detection disabled (the default) the read succeeds and the defect is inert. The fix adds an explicit chan->req != NULL test to the channel traversal and additionally rejects a NULL user_data argument, which would otherwise have matched, and cancelled, an unrelated request.
CVE-2026-93671 2026-11-16 3.7 Low
The websocket client's HTTP header callback on_header_value() in subsys/net/lib/websocket/websocket.c receives the Sec-WebSocket-Accept header value as a pointer/length pair from the HTTP parser. The referenced bytes live inside the application-supplied receive buffer and are not NUL terminated. When the received value did not match the expected accept key, the pointer was passed directly to a %s conversion in a NET_DBG() call, so the logging code measured the string with strlen() and read on past the end of the header value looking for a terminator. The value is supplied by the peer during the WebSocket handshake, before any application-level authentication, so a malicious or man-in-the-middle server reached over a ws:// (or otherwise attacker-terminated) connection can trigger the mismatch branch at will simply by answering with a wrong accept key. By sizing the response so the header value ends at the tail of the buffer passed to websocket_connect() as wreq->tmp_buf, the peer can make the scan run off the end of that buffer and into adjacent memory. The defective log statement is compiled in only when websocket debug logging is enabled (CONFIG_NET_WEBSOCKET_LOG_LEVEL_DBG=y, or CONFIG_LOG_DEFAULT_LEVEL=4); it is absent from a default build, which bounds exposure to diagnostic configurations. The consequence is an out-of-bounds read whose contents are emitted to the log stream: memory adjacent to the receive buffer is disclosed wherever the device's logs are collected or displayed. On targets where the memory following the buffer is not mapped, the scan can instead fault and terminate the connection or thread. No out-of-bounds write occurs, so there is no integrity impact. The fix copies at most sizeof(got) - 1 bytes of the parser-provided slice into a bounded stack buffer, NUL terminates the copy, and logs that instead, so the formatter never reads beyond the bytes the parser actually offered.
CVE-2026-93670 2026-11-16 3.5 Low
The Synopsys DesignWare I3C controller driver (drivers/i3c/i3c_dw.c) tracks free Device Address Table (DAT) slots with get_free_pos(), which signals an exhausted table by returning -1. The helper declared its return type as uint8_t, so the sentinel was truncated to 255, and both consumers (dw_i3c_attach_device() and dw_i3c_i2c_attach_device()) also stored it in a uint8_t before testing if (pos < 0) — a comparison that is never true for an unsigned value. The exhaustion guard was therefore inert in every build. With the guard defeated, an attach attempted on a full DAT proceeds with pos == 255: it writes data->dw_i3c_i2c_priv_data[255].id, more than 200 bytes past the end of the 32-element dw_i3c_i2c_priv_data array and past the end of struct dw_i3c_data; it stores the resulting out-of-bounds address in desc->controller_priv, from which later detach, reattach and IBI operations read the slot index back; and it performs a 32-bit MMIO store 1020 bytes beyond the hardware DAT base, outside the table the controller reports. The attach still returns success, so the upper layer believes the device is bound. The DAT is smaller than the software array (its depth is read from DEVICE_ADDR_TABLE_POINTER, commonly 8 or 16 entries), so exhaustion is reachable. In a dual-role build (CONFIG_I3C_DUAL_ROLE with CONFIG_I3C_USE_IBI) acting as a secondary controller, the attach count is supplied by the bus's active controller: i3c_sec_handoffed() attaches one device per entry of the received DEFTGTS list, so a hostile or malfunctioning controller on the local I3C bus that declares more targets than the local DAT depth triggers the condition once per surplus entry. Exhaustion can also be reached from a devicetree that declares more devices than the table holds, or by repeated i3c attach shell commands. Impact is bounded: the out-of-bounds store is a single byte of fixed value at a fixed displacement, with no attacker-chosen data or offset, so the realistic outcomes are corruption of neighbouring static driver state, writes into reserved controller registers, and inconsistent driver bookkeeping (a crash or a wedged I3C bus) rather than a controllable memory-write primitive. The attack vector is the local chip-to-chip I3C bus; there is no network-reachable path.
CVE-2026-93669 2026-11-16 4.7 Medium
The ITE IT8xxx2 SHI host-command backend in subsys/mgmt/ec_host_cmd/backends/ec_host_cmd_backend_shi_ite.c arms the SPI peripheral before its receive context exists. shi_ite_init_registers() sets the state machine to SHI_STATE_READY_TO_RECV and calls irq_enable() while the device initializes at POST_KERNEL priority CONFIG_KERNEL_INIT_PRIORITY_DEFAULT (40), but data->rx_ctx and data->tx are only assigned later by shi_ite_backend_init(), which ec_host_cmd_init() invokes at CONFIG_EC_HOST_CMD_INIT_PRIORITY (default 80). If the attached host processor starts a SPI transaction inside that window, the Rx-valid-length interrupt fires, shi_ite_int_handler() passes its state check and calls shi_ite_parse_header(), which stores the host-derived request length through the still-NULL data->rx_ctx. On the IT8xxx2 low addresses are not backed by RAM, and with CONFIG_NULL_POINTER_EXCEPTION_DETECTION_PMP the first bytes of the address space are explicitly made inaccessible, so the store raises a fatal access fault in interrupt context. The window widens further when CONFIG_EC_HOST_CMD_INITIALIZE_AT_BOOT is disabled and the application calls ec_host_cmd_init() itself. The result is a kernel panic on the embedded controller: with Zephyr's default fatal handler the CPU halts, so the controller stops servicing host commands until a hardware reset. Because the trigger is traffic from the attached host processor -- an untrusted peer from the controller firmware's point of view -- software on that host can provoke the fault by forcing a controller reset and issuing transactions during the reboot, turning a recoverable reset into a persistent outage. Impact is limited to availability: the faulting address is fixed and not attacker-chosen, so no memory-corruption primitive follows. The fix leaves the interface at SHI_STATE_DISABLED with the interrupt masked during device init, moves irq_enable() into shi_ite_backend_init() after the buffers are published, and makes shi_ite_int_handler() reject a NULL data->rx_ctx while write-clearing IT83XX_SPI_ISR and IT83XX_SPI_RX_VLISR so that an unexpected early interrupt cannot storm.
CVE-2026-93668 2026-11-16 6.5 Medium
The Bluetooth Classic SDP server in subsys/bluetooth/host/classic/sdp.c allocated every response PDU through bt_sdp_create_pdu(), which expands to bt_l2cap_create_pdu() and therefore uses a K_FOREVER timeout. The allocation is made from sdp_pool, a fixed pool holding only CONFIG_BT_MAX_CONN buffers (one in the default configuration) that is shared with the SDP client role. When the pool is empty the call blocks without a bound. The allocation is reached from bt_sdp_recv() on the Bluetooth host's RX context: the bt_workq "BT RX WQ" workqueue in the default configuration since v3.1.0, and the dedicated "BT RX" thread before that. This context processes all normal-priority HCI events and all received ACL data. The SDP L2CAP server is registered on PSM 0x0001 with no security requirement (BT_SECURITY_L0), so an unpaired, unauthenticated BR/EDR peer within radio range of a connectable device can drive it. Every malformed or unrecognised SDP PDU reaches send_err_rsp(), and the sdp_svc_search_req(), sdp_svc_att_req() and sdp_svc_search_att_req() handlers allocate as well, so a short burst of pipelined requests drains the pool and parks the RX context in the blocking allocation. A pool buffer is released only once its response has been sent, and a peer that withholds baseband acknowledgements keeps the controller's buffers for the link full, so the response is never sent. While the RX context is blocked, the entire Bluetooth host, for all connections and both LE and BR/EDR, stops processing normal-priority HCI events and received data. In most affected releases the stall is permanent. Queued PDUs are freed only by connection or channel teardown, which waits for the normal-priority Disconnection Complete handler, and that handler runs on the blocked RX context, so the host does not recover without a reset. In v3.7.0 through v4.1.x the TX processor discards the queued response once the link supervision timeout drops the connection, so each stall ends at that timeout, but the peer can reconnect and repeat it for as long as it stays in range. The impact is limited to availability; no memory corruption or information disclosure is involved. The fix adds sdp_svc_create_pdu() using K_NO_WAIT, pre-allocates the response buffer once in bt_sdp_recv(), stashes the request in sdp->recv_pending when no buffer is available, and retries it from a work handler once a buffer is freed by the pool destroy callback.
CVE-2026-93667 2026-11-16 5.9 Medium
The Virtual L2 receive handler virtual_recv() in subsys/net/l2/virtual/virtual.c ends with a fall-through path meant for a virtual interface that has nothing attached below it: it takes net_if_get_device(iface)->api, treats it as a struct virtual_interface_api, and calls api->recv(iface, pkt). That handler is however also invoked with a non-virtual interface: ethernet_recv() in subsys/net/l2/ethernet/ethernet.c deliberately passes the Ethernet interface so that a tagged frame can be dispatched over the VLAN interfaces attached to it. For an Ethernet interface dev->api is a struct ethernet_api, whose layout only shares the leading struct net_if_api, so the slot read as recv is actually get_config() (default) or get_capabilities() (when CONFIG_NET_STATISTICS_ETHERNET is enabled). The fall-through is reached whenever no attached virtual interface claims the frame - most simply when the VLAN interface owning the frame's tag exists but is administratively down, since net_eth_get_vlan_iface() resolves the tag without checking link state while virtual_recv() skips interfaces that are not up. Any host able to place an 802.1Q-tagged Ethernet frame on the same link can then trigger the mistyped indirect call; no authentication, IP reachability or user interaction is required, because the frame is consumed at L2 before any address check. The resulting call passes a struct net_if where the driver expects a struct device and a struct net_pkt where it expects a struct net_if , with the callee's remaining parameters left as whatever the call site happens to leave in the argument registers. Driver implementations dereference these values: get_capabilities() typically reads dev->config/dev->data (a wild read through a non-pointer field of struct net_if), and get_config() implementations write through the uninitialized struct ethernet_config * argument. The practical impact is undefined behaviour in the network RX path - crashes and uncontrolled memory corruption - plus mis-handling of the packet when a capability bitmask is returned as a net_verdict. The attacker controls neither the corrupted address nor the value written, so this is a denial-of-service and memory-corruption issue rather than a controllable write primitive. The same defective fall-through is reachable through any_recv() in subsys/net/l2/dummy/any/any.c, which passes a dummy interface whose struct dummy_api is shorter than the offset read, producing an out-of-bounds read of the driver's API object followed by an indirect call. The fix drops any packet whose interface is not a Virtual L2 interface, closing both entry points.
CVE-2026-111306 1 Microsoft 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more 2026-11-16 8.8 High
Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code over a network.
CVE-2026-93666 2026-11-16 5.3 Medium
The Bluetooth Classic SDP client built its outgoing request PDUs with bt_sdp_create_pdu(), which allocates from the sdp_pool net-buf pool with a K_FOREVER timeout and no failure handling, in sdp_client_ss_search(), sdp_client_sa_search() and sdp_client_ssa_search() in subsys/bluetooth/host/classic/sdp.c. All of these run on the Bluetooth workqueue bt_workq (via sdp_client_work_handler(), the L2CAP sdp_client_connected() callback, or the continuation-state follow-up from a received response), which is the same single thread that dispatches incoming HCI ACL and event traffic, drives L2CAP, and performs connection and channel teardown. sdp_pool holds only CONFIG_BT_MAX_CONN buffers (one by default) and is shared with the SDP server role. An unauthenticated peer within BR/EDR range can drive both halves of the trigger. The SDP L2CAP server is registered at BT_SECURITY_L0, so any inbound SDP request makes the device allocate the pool's buffer for a response, which is held until the controller has transmitted it. The same peer can then cause a client request to be issued while the pool is empty: in-tree profiles start SDP discovery from inbound connection callbacks (for example hfp_hf_accept() calls bt_sdp_discover() through hfp_hf_create(), and hfp_ag.c mirrors this), and a peer acting as an SDP server can force repeated client requests by answering with partial responses carrying continuation state. With the pool empty, the allocation blocks uninterruptibly and freezes the entire Bluetooth host. The stall becomes permanent when the release of the outstanding buffer itself depends on the blocked workqueue: if the link carrying the queued PDU is dropped or stalls, hci_disconn_complete() and the L2CAP channel cleanup that purges the channel TX queue are themselves bt_workq work items, so the buffer is never returned. The result is an unrecoverable denial of service of all Bluetooth functionality until reboot; there is no memory-safety, confidentiality or integrity impact. The fix allocates client PDUs with K_NO_WAIT via a new sdp_client_create_pdu(), propagates -ENOBUFS, parks the session on a new SDP_CLIENT_FLAG_WAIT_FOR_TX_BUF flag, and adds an sdp_pool destructor that re-submits the SDP client worker when a buffer becomes available. Note that the SDP server role still allocated from the same pool with K_FOREVER at this commit; that path was addressed separately.
CVE-2026-111304 1 Microsoft 9 365 Apps, Microsoft 365, Microsoft Office Ltsc For Mac 2021 and 6 more 2026-11-16 8.8 High
Use after free in Microsoft Office Word allows an unauthorized attacker to execute code over a network.
CVE-2026-111302 1 Microsoft 11 365 Apps, Microsoft 365, Microsoft Office Ltsc 2021 and 8 more 2026-11-16 7.8 High
Heap-based buffer overflow in Microsoft Office Word allows an unauthorized attacker to execute code locally.
CVE-2026-95782 1 Hpe 1 Private 5g Core 2026-11-16 7.5 High
A vulnerability exists in a monitoring component that may, under certain conditions, allow security controls to be circumvented. Successful exploitation could result in unauthorized access to information intended for authorized users only.
CVE-2026-67250 2026-11-16 7.3 High
A local privilege escalation (LPE) vulnerability in Pebble’s installers could allow a local attacker with low privilege access to place a malicious Dynamic Link Library (DLL) where a privileged executable file will load it.
CVE-2026-65951 2026-11-16 5.8 Medium
A path traversal vulnerability in the TAR.GZ extraction logic of Lenovo XClarity Essentials OneCLI 5.5.0 for Linux could allow an attacker to write arbitrary files with the privileges of the OneCLI process by convincing a user to process a specially crafted TAR.GZ update package.
CVE-2026-126673 2026-11-16 9.8 Critical
Data::Dump::Streamer versions before 3.00 for Perl allow code injection via unescaped Regexp patterns in _dump_qr. A Regexp's pattern is written into a qr literal without escaping "$" or "@", so "@{[ ... ]}" and "${\ ... }" in the pattern run as code when the dump is evaluated. An already escaped delimiter gets a second backslash, which leaves the delimiter bare and ends the qr literal early. An attacker who supplies a pattern that an application compiles, dumps and later restores with eval or do can run arbitrary Perl code.
CVE-2026-127219 2026-11-16 5.3 Medium
WPChat plugin for WordPress before 1.4.6 contains a broken access control vulnerability that allows unauthenticated remote attackers to invoke the admin claim-offer action by reusing the publicly exposed wpchat_frontend nonce without any capability check. Attackers can call SmartSearchManagerService::claimOffer() via POST /wp-json/wpchat/v1/smart-search/claim-offer to register an attacker-controlled email against the site's domain using the site's stored api_token, corrupting the WPChat account and newsletter identity bound to the installation.
CVE-2026-115563 1 Modelcontextprotocol 1 Python-sdk 2026-11-16 7.5 High
The Model Context Protocol Python SDK is the official Python SDK for Model Context Protocol servers and clients. From 1.9.1 until 1.30.0 and 2.2.0, OAuth client support in mcp.client.auth can send credentials to an authorization server chosen by an untrusted MCP server. ClientCredentialsOAuthProvider and PrivateKeyJWTOAuthProvider cannot identify the authorization server that owns their credentials. Affected HTTP clients using those providers, OAuthClientProvider, or the deprecated 1.x RFC7523OAuthClientProvider can disclose a client_secret, authorization code, PKCE code_verifier, or signed client assertion. MCP servers, stdio clients, and clients that attach their own tokens or headers are not affected. Interactive OAuthClientProvider use requires a person to start sign-in, while the unattended providers do not. For ClientCredentialsOAuthProvider and PrivateKeyJWTOAuthProvider, callers must configure issuer= after upgrading because omission still follows the MCP server's advertised authorization server, and the deprecated RFC7523OAuthClientProvider must be replaced because it has no issuer option. A stored client registration without an issuer remains unbound after upgrading, so stored OAuth client information must be cleared once to register again or a manually pre-registered record must be updated with its issuer. This issue is fixed in versions 1.30.0 and 2.2.0.
CVE-2026-120698 2026-11-16 8.8 High
Wiki.js is an open source wiki app built on Node.js. Prior to 2.5.315, an authenticated account with only manage:users can use users.update to change the password of any local account, including the Root administrator and other accounts with manage:system, by omitting the optional groups argument, which is automatically allowed and bypasses destination-group authorization without checking the target's current privileges. The attacker can use users.disableTFA to clear the same target's tfaIsActive state and TFA secret without a target-privilege check, then authenticate with the replacement password. Supplying groups: [] to users.update can remove every group relationship from a selected administrator and leave the installation without a legitimate account holding manage:system. Additional administrators with IDs greater than 2 can also be deactivated or deleted. This issue is fixed in version 2.5.315.
CVE-2026-114505 2026-11-16 N/A
OpenCTI is an open source platform for managing cyber threat intelligence knowledge and observables. Prior to 7.260722.0, the GraphQL endpoint accepts query operations over HTTP GET because CSRF prevention is disabled (csrfPrevention: false), placing the complete GraphQL query and its arguments in the request URL. Server and reverse-proxy logs, browser history, and shared caches can retain sensitive filters, marking-restricted identifiers, and investigation search arguments, allowing a person with access to those records to recover legitimate users' query contents. GraphQL mutations are not accepted over GET, and the issue does not permit code execution. This issue is fixed in version 7.260722.0.
CVE-2026-126919 1 Google 1 Chrome 2026-11-16 8.8 High
Use after free in BrowserTag in Google Chrome prior to 157.0.8103.78 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: High)