| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: meson: axg-card: fix 'use-after-free'
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()',
so move 'pad' pointer initialization after this function when memory is
already reallocated.
Kasan bug report:
==================================================================
BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc
Read of size 8 at addr ffff000000e8b260 by task modprobe/356
CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1
Call trace:
dump_backtrace+0x94/0xec
show_stack+0x18/0x24
dump_stack_lvl+0x78/0x90
print_report+0xfc/0x5c0
kasan_report+0xb8/0xfc
__asan_load8+0x9c/0xb8
axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card]
meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils]
platform_probe+0x8c/0xf4
really_probe+0x110/0x39c
__driver_probe_device+0xb8/0x18c
driver_probe_device+0x108/0x1d8
__driver_attach+0xd0/0x25c
bus_for_each_dev+0xe0/0x154
driver_attach+0x34/0x44
bus_add_driver+0x134/0x294
driver_register+0xa8/0x1e8
__platform_driver_register+0x44/0x54
axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card]
do_one_initcall+0xdc/0x25c
do_init_module+0x10c/0x334
load_module+0x24c4/0x26cc
init_module_from_file+0xd4/0x128
__arm64_sys_finit_module+0x1f4/0x41c
invoke_syscall+0x60/0x188
el0_svc_common.constprop.0+0x78/0x13c
do_el0_svc+0x30/0x40
el0_svc+0x38/0x78
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194 |
| In the Linux kernel, the following vulnerability has been resolved:
dma-buf: heaps: Fix off-by-one in CMA heap fault handler
Until VM_DONTEXPAND was added in commit 1c1914d6e8c6 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping. |
| A improper neutralization of special elements used in an os command ('os command injection') vulnerability in Fortinet FortiSandbox 4.4.0 through 4.4.8 may allow attacker to execute unauthorized code or commands via <insert attack vector here> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Correct the defined value for AMDGPU_DMUB_NOTIFICATION_MAX
[Why & How]
It actually exposes '6' types in enum dmub_notification_type. Not 5. Using smaller
number to create array dmub_callback & dmub_thread_offload has potential to access
item out of array bound. Fix it. |
| The ElementsKit Elementor Addons plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the `Live_Action::reset()` function in all versions up to, and including, 3.8.2 The function is hooked to the WordPress `init` action and triggers when both `post` and `action=elementor` GET parameters are present, with no authentication or nonce verification. This makes it possible for unauthenticated attackers to overwrite the Elementor content (`_elementor_data`) of any `elementskit_widget` custom post type by visiting a specially crafted URL. The widget's custom designs, text, and configurations are permanently replaced with a blank template. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: panasonic-laptop: Fix SINF array out of bounds accesses
The panasonic laptop code in various places uses the SINF array with index
values of 0 - SINF_CUR_BRIGHT(0x0d) without checking that the SINF array
is big enough.
Not all panasonic laptops have this many SINF array entries, for example
the Toughbook CF-18 model only has 10 SINF array entries. So it only
supports the AC+DC brightness entries and mute.
Check that the SINF array has a minimum size which covers all AC+DC
brightness entries and refuse to load if the SINF array is smaller.
For higher SINF indexes hide the sysfs attributes when the SINF array
does not contain an entry for that attribute, avoiding show()/store()
accessing the array out of bounds and add bounds checking to the probe()
and resume() code accessing these. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: nxp-fspi: fix the KASAN report out-of-bounds bug
Change the memcpy length to fix the out-of-bounds issue when writing the
data that is not 4 byte aligned to TX FIFO.
To reproduce the issue, write 3 bytes data to NOR chip.
dd if=3b of=/dev/mtd0
[ 36.926103] ==================================================================
[ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838
[ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455
[ 36.946721]
[ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070
[ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT)
[ 36.961260] Call trace:
[ 36.963723] dump_backtrace+0x90/0xe8
[ 36.967414] show_stack+0x18/0x24
[ 36.970749] dump_stack_lvl+0x78/0x90
[ 36.974451] print_report+0x114/0x5cc
[ 36.978151] kasan_report+0xa4/0xf0
[ 36.981670] __asan_report_load_n_noabort+0x1c/0x28
[ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838
[ 36.990800] spi_mem_exec_op+0x8ec/0xd30
[ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0
[ 36.999323] spi_mem_dirmap_write+0x238/0x32c
[ 37.003710] spi_nor_write_data+0x220/0x374
[ 37.007932] spi_nor_write+0x110/0x2e8
[ 37.011711] mtd_write_oob_std+0x154/0x1f0
[ 37.015838] mtd_write_oob+0x104/0x1d0
[ 37.019617] mtd_write+0xb8/0x12c
[ 37.022953] mtdchar_write+0x224/0x47c
[ 37.026732] vfs_write+0x1e4/0x8c8
[ 37.030163] ksys_write+0xec/0x1d0
[ 37.033586] __arm64_sys_write+0x6c/0x9c
[ 37.037539] invoke_syscall+0x6c/0x258
[ 37.041327] el0_svc_common.constprop.0+0x160/0x22c
[ 37.046244] do_el0_svc+0x44/0x5c
[ 37.049589] el0_svc+0x38/0x78
[ 37.052681] el0t_64_sync_handler+0x13c/0x158
[ 37.057077] el0t_64_sync+0x190/0x194
[ 37.060775]
[ 37.062274] Allocated by task 455:
[ 37.065701] kasan_save_stack+0x2c/0x54
[ 37.069570] kasan_save_track+0x20/0x3c
[ 37.073438] kasan_save_alloc_info+0x40/0x54
[ 37.077736] __kasan_kmalloc+0xa0/0xb8
[ 37.081515] __kmalloc_noprof+0x158/0x2f8
[ 37.085563] mtd_kmalloc_up_to+0x120/0x154
[ 37.089690] mtdchar_write+0x130/0x47c
[ 37.093469] vfs_write+0x1e4/0x8c8
[ 37.096901] ksys_write+0xec/0x1d0
[ 37.100332] __arm64_sys_write+0x6c/0x9c
[ 37.104287] invoke_syscall+0x6c/0x258
[ 37.108064] el0_svc_common.constprop.0+0x160/0x22c
[ 37.112972] do_el0_svc+0x44/0x5c
[ 37.116319] el0_svc+0x38/0x78
[ 37.119401] el0t_64_sync_handler+0x13c/0x158
[ 37.123788] el0t_64_sync+0x190/0x194
[ 37.127474]
[ 37.128977] The buggy address belongs to the object at ffff00081037c2a0
[ 37.128977] which belongs to the cache kmalloc-8 of size 8
[ 37.141177] The buggy address is located 0 bytes inside of
[ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3)
[ 37.153465]
[ 37.154971] The buggy address belongs to the physical page:
[ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c
[ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff)
[ 37.175149] page_type: 0xfdffffff(slab)
[ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000
[ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000
[ 37.194553] page dumped because: kasan: bad access detected
[ 37.200144]
[ 37.201647] Memory state around the buggy address:
[ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc
[ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc
[ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc
[ 37.228186] ^
[ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 37.246962] ==============================================================
---truncated--- |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 7.7.1.0 through 8.5, LTS2025 release version 8.3.1.0 through 8.3.1.20, LTS2024 release versions 7.13.1.0 through 7.13.1.50, contain a cross-site Scripting vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Script injection. |
| Fiber is a web framework for Go. In github.com/gofiber/fiber/v3 versions through 3.1.0, the default key generator in the cache middleware uses only the request path and does not include the query string. As a result, requests for the same path with different query parameters can share a cache key and receive the wrong cached response. This can cause response mix-up for query-dependent endpoints and may expose data intended for a different request. This issue is fixed after version 3.1.0. |
| The Betheme theme for WordPress is vulnerable to Arbitrary File Upload in versions up to, and including, 28.4. This is due to the upload_icons() function workflow moving and unzipping user-controlled ZIP files into a public uploads directory without validating extracted file types. This makes it possible for authenticated attackers, with author-level access and above, to upload arbitrary files (including PHP) and achieve remote code execution via the Icons icon-pack upload flow. |
| RouterOS provides various services that rely on correct
verification of client and server certificates to secure confidentiality and
integrity of communications. This includes OpenVPN, CAPsMAN, Dot1x (802.1X),
among others.
The vulnerability lies in shared certificate validation
logic which uses the system certificate store that is shared and equally
trusted by all system services. This causes confusion of scope, allowing any
certificate authority present in the system-wide trust store to be trusted in
any context (with some exceptions), allowing partial or full authentication
bypass in CAPsMAN, OpenVPN, Dot1X and potentially others. |
| Dell PowerProtect Data Domain with Data Domain Operating System (DD OS) of Feature Release versions 8.4 through 8.5 contain an improper authentication vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to unauthorized access. |
| OpenClaw versions 2026.4.9 before 2026.4.10 contain a sender policy bypass vulnerability in the outbound host-media attachment read helper that allows unauthorized local file disclosure. Attackers with denied read access via toolsBySender or group policy can trigger host-media attachment loading to bypass sender and group-scoped authorization boundaries and retrieve readable local files through the outbound media path. |
| KTransformers through 0.5.3 contains an unsafe deserialization vulnerability in the balance_serve backend mode where the scheduler RPC server binds a ZMQ ROUTER socket to all interfaces with no authentication and deserializes incoming messages using pickle.loads() without validation. Attackers can send a crafted pickle payload to the exposed ZMQ socket to execute arbitrary code on the server with the privileges of the ktransformers process. |
| Claude SDK for TypeScript provides access to the Claude API from server-side TypeScript or JavaScript applications. From version 0.79.0 to before version 0.91.1, the BetaLocalFilesystemMemoryTool in the Anthropic TypeScript SDK created memory files and directories using the Node.js default modes (0o666 for files, 0o777 for directories), leaving them world-readable on systems with a standard umask and world-writable in environments with a permissive umask such as many Docker base images. A local attacker on a shared host could read persisted agent state, and in containerized deployments could modify memory files to influence subsequent model behavior. This issue has been patched in version 0.91.1. |
| OpenClaw versions 2026.2.23 before 2026.4.12 contain a weakened exec approval binding vulnerability in busybox and toybox applet execution that allows attackers to obscure which applet would actually run. Attackers can exploit opaque multi-call binaries to bypass exec approval mechanisms and weaken risk classification of unsafe applet invocations. |
| An issue in the TVicPort64.sys component of EnTech Taiwan TVicPort Product v4.0, File v5.2.1.0 allows attackers to escalate privileges via sending crafted IOCTL 0x80002008 requests. |
| OpenClaw before 2026.4.10 contains a server-side request forgery policy bypass vulnerability in existing-session browser interaction routes. Attackers can bypass SSRF navigation guards to interact with or navigate to unauthorized targets without policy enforcement. |
| Traccar is an open source GPS tracking system. In versions between 6.11.1 and 6.13.0, the CSV export functionality writes position data, including user-controlled device and computed attributes, to CSV output without proper escaping. An attacker can inject spreadsheet formulas through exported fields. When a manager or administrator opens the exported CSV file in spreadsheet software, this can cause formula execution and lead to command execution or data exfiltration. This has been patched in version 6.13.0. |
| A security flaw has been discovered in IObit Advanced SystemCare 19. This affects an unknown part of the file ASC.exe of the component Service. The manipulation results in symlink following. Attacking locally is a requirement. This attack is characterized by high complexity. It is indicated that the exploitability is difficult. The exploit has been released to the public and may be used for attacks. |
