| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_uac1_legacy: validate control request size
f_audio_complete() copies req->length bytes into a 4-byte stack
variable:
u32 data = 0;
memcpy(&data, req->buf, req->length);
req->length is derived from the host-controlled USB request path,
which can lead to a stack out-of-bounds write.
Validate req->actual against the expected payload size for the
supported control selectors and decode only the expected amount
of data.
This avoids copying a host-influenced length into a fixed-size
stack object. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_hid: move list and spinlock inits from bind to alloc
There was an issue when you did the following:
- setup and bind an hid gadget
- open /dev/hidg0
- use the resulting fd in EPOLL_CTL_ADD
- unbind the UDC
- bind the UDC
- use the fd in EPOLL_CTL_DEL
When CONFIG_DEBUG_LIST was enabled, a list_del corruption was reported
within remove_wait_queue (via ep_remove_wait_queue). After some
debugging I found out that the queues, which f_hid registers via
poll_wait were the problem. These were initialized using
init_waitqueue_head inside hidg_bind. So effectively, the bind function
re-initialized the queues while there were still items in them.
The solution is to move the initialization from hidg_bind to hidg_alloc
to extend their lifetimes to the lifetime of the function instance.
Additionally, I found many other possibly problematic init calls in the
bind function, which I moved as well. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_rndis: Fix net_device lifecycle with device_move
The net_device is allocated during function instance creation and
registered during the bind phase with the gadget device as its sysfs
parent. When the function unbinds, the parent device is destroyed, but
the net_device survives, resulting in dangling sysfs symlinks:
console:/ # ls -l /sys/class/net/usb0
lrwxrwxrwx ... /sys/class/net/usb0 ->
/sys/devices/platform/.../gadget.0/net/usb0
console:/ # ls -l /sys/devices/platform/.../gadget.0/net/usb0
ls: .../gadget.0/net/usb0: No such file or directory
Use device_move() to reparent the net_device between the gadget device
tree and /sys/devices/virtual across bind and unbind cycles. During the
final unbind, calling device_move(NULL) moves the net_device to the
virtual device tree before the gadget device is destroyed. On rebinding,
device_move() reparents the device back under the new gadget, ensuring
proper sysfs topology and power management ordering.
To maintain compatibility with legacy composite drivers (e.g., multi.c),
the borrowed_net flag is used to indicate whether the network device is
shared and pre-registered during the legacy driver's bind phase. |
| In the Linux kernel, the following vulnerability has been resolved:
igb: remove napi_synchronize() in igb_down()
When an AF_XDP zero-copy application terminates abruptly (e.g., kill -9),
the XSK buffer pool is destroyed but NAPI polling continues.
igb_clean_rx_irq_zc() repeatedly returns the full budget, preventing
napi_complete_done() from clearing NAPI_STATE_SCHED.
igb_down() calls napi_synchronize() before napi_disable() for each queue
vector. napi_synchronize() spins waiting for NAPI_STATE_SCHED to clear,
which never happens. igb_down() blocks indefinitely, the TX watchdog
fires, and the TX queue remains permanently stalled.
napi_disable() already handles this correctly: it sets NAPI_STATE_DISABLE.
After a full-budget poll, __napi_poll() checks napi_disable_pending(). If
set, it forces completion and clears NAPI_STATE_SCHED, breaking the loop
that napi_synchronize() cannot.
napi_synchronize() was added in commit 41f149a285da ("igb: Fix possible
panic caused by Rx traffic arrival while interface is down").
napi_disable() provides stronger guarantees: it prevents further
scheduling and waits for any active poll to exit.
Other Intel drivers (ixgbe, ice, i40e) use napi_disable() without a
preceding napi_synchronize() in their down paths.
Remove redundant napi_synchronize() call and reorder napi_disable()
before igb_set_queue_napi() so the queue-to-NAPI mapping is only
cleared after polling has fully stopped. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use check_add_overflow() to prevent u16 DACL size overflow
set_posix_acl_entries_dacl() and set_ntacl_dacl() accumulate ACE sizes
in u16 variables. When a file has many POSIX ACL entries, the
accumulated size can wrap past 65535, causing the pointer arithmetic
(char *)pndace + *size to land within already-written ACEs. Subsequent
writes then overwrite earlier entries, and pndacl->size gets a
truncated value.
Use check_add_overflow() at each accumulation point to detect the
wrap before it corrupts the buffer, consistent with existing
check_mul_overflow() usage elsewhere in smbacl.c. |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: Replace BUG_ON with error handling for CNID count checks
In a06ec283e125 next_id, folder_count, and file_count in the super block
info were expanded to 64 bits, and BUG_ONs were added to detect
overflow. This triggered an error reported by syzbot: if the MDB is
corrupted, the BUG_ON is triggered. This patch replaces this mechanism
with proper error handling and resolves the syzbot reported bug.
Singed-off-by: Jori Koolstra <jkoolstra@xs4all.nl> |
| In the Linux kernel, the following vulnerability has been resolved:
HID: prodikeys: Check presence of pm->input_ep82
Fake USB devices can send their own report descriptors for which the
input_mapping() hook does not get called. In this case, pm->input_ep82 stays
NULL, which leads to a crash later.
This does not happen with the real device, but can be provoked by imposing as
one. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore -EBUSY when checking nested events from vcpu_block()
Ignore -EBUSY when checking nested events after exiting a blocking state
while L2 is active, as exiting to userspace will generate a spurious
userspace exit, usually with KVM_EXIT_UNKNOWN, and likely lead to the VM's
demise. Continuing with the wakeup isn't perfect either, as *something*
has gone sideways if a vCPU is awakened in L2 with an injected event (or
worse, a nested run pending), but continuing on gives the VM a decent
chance of surviving without any major side effects.
As explained in the Fixes commits, it _should_ be impossible for a vCPU to
be put into a blocking state with an already-injected event (exception,
IRQ, or NMI). Unfortunately, userspace can stuff MP_STATE and/or injected
events, and thus put the vCPU into what should be an impossible state.
Don't bother trying to preserve the WARN, e.g. with an anti-syzkaller
Kconfig, as WARNs can (hopefully) be added in paths where _KVM_ would be
violating x86 architecture, e.g. by WARNing if KVM attempts to inject an
exception or interrupt while the vCPU isn't running. |
| In the Linux kernel, the following vulnerability has been resolved:
EFI/CPER: don't go past the ARM processor CPER record buffer
There's a logic inside GHES/CPER to detect if the section_length
is too small, but it doesn't detect if it is too big.
Currently, if the firmware receives an ARM processor CPER record
stating that a section length is big, kernel will blindly trust
section_length, producing a very long dump. For instance, a 67
bytes record with ERR_INFO_NUM set 46198 and section length
set to 854918320 would dump a lot of data going a way past the
firmware memory-mapped area.
Fix it by adding a logic to prevent it to go past the buffer
if ERR_INFO_NUM is too big, making it report instead:
[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
[Hardware Error]: event severity: recoverable
[Hardware Error]: Error 0, type: recoverable
[Hardware Error]: section_type: ARM processor error
[Hardware Error]: MIDR: 0xff304b2f8476870a
[Hardware Error]: section length: 854918320, CPER size: 67
[Hardware Error]: section length is too big
[Hardware Error]: firmware-generated error record is incorrect
[Hardware Error]: ERR_INFO_NUM is 46198
[ rjw: Subject and changelog tweaks ] |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix potential zero beacon interval in beacon tracking
During fuzz testing, it was discovered that bss_conf->beacon_int
might be zero, which could result in a division by zero error in
subsequent calculations. Set a default value of 100 TU if the
interval is zero to ensure stability. |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: supply snapshot context in ceph_zero_partial_object()
The ceph_zero_partial_object function was missing proper snapshot
context for its OSD write operations, which could lead to data
inconsistencies in snapshots.
Reproducer:
../src/vstart.sh --new -x --localhost --bluestore
./bin/ceph auth caps client.fs_a mds 'allow rwps fsname=a' mon 'allow r fsname=a' osd 'allow rw tag cephfs data=a'
mount -t ceph fs_a@.a=/ /mnt/mycephfs/ -o conf=./ceph.conf
dd if=/dev/urandom of=/mnt/mycephfs/foo bs=64K count=1
mkdir /mnt/mycephfs/.snap/snap1
md5sum /mnt/mycephfs/.snap/snap1/foo
fallocate -p -o 0 -l 4096 /mnt/mycephfs/foo
echo 3 > /proc/sys/vm/drop/caches
md5sum /mnt/mycephfs/.snap/snap1/foo # get different md5sum!! |
| A flaw was found in Corosync. An integer overflow vulnerability in Corosync's join message sanity validation allows a remote, unauthenticated attacker to send crafted User Datagram Protocol (UDP) packets. This can cause the service to crash, leading to a denial of service. This vulnerability specifically affects Corosync deployments configured to use totemudp/totemudpu mode. |
| A flaw was found in Corosync. A remote unauthenticated attacker can exploit a wrong return value vulnerability in the Corosync membership commit token sanity check by sending a specially crafted User Datagram Protocol (UDP) packet. This can lead to an out-of-bounds read, causing a denial of service (DoS) and potentially disclosing limited memory contents. This vulnerability affects Corosync when running in totemudp/totemudpu mode, which is the default configuration. |
| HTML injection vulnerability in PHP Point of Sale v19.4. This vulnerability allows an attacker to render HTML in the victim's browser due to a lack of proper validation of user input by sending a request to '/reports/generate/specific_customer', ussing 'start_date_formatted' y 'end_date_formatted' parameters. |
| Heap-based Buffer Overflow vulnerability in mod_proxy_ajp of Apache HTTP Server.
If mod_proxy_ajp connects to a malicious AJP server this AJP server can send a malicious AJP message back to mod_proxy_ajp and cause it to write 4 attacker controlled bytes after the end of a heap based buffer.
This issue affects Apache HTTP Server: through 2.4.66.
Users are recommended to upgrade to version 2.4.67, which fixes the issue. |
| Vulnerability in the Oracle OCI CLI product of Oracle Open Source Projects. The supported versions that is affected is 3.77. Easily exploitable vulnerability allows unauthenticated attacker with network access to compromise Oracle OCI CLI. Successful attacks of this vulnerability can result in Oracle OCI CLI allowing users to place imported files outside the intended directory. |
| Vulnerability in the Oracle Cloud Native Environment Command Line Interface product of Oracle Open Source Projects. The supported versions that is affected is v2.3.2. Easily exploitable vulnerability allows unauthenticated attacker to compromise Oracle Cloud Native Environment Command Line Interface product via a malicious environment variable. Successful attacks of this vulnerability can result in Oracle Cloud Native Environment Command Line Interface allowing users to execute arbitrary code. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Apache Wicket.
This issue affects Apache Wicket: from 8.0.0 through 8.17.0, 9.0.0, from 10.0.0 through 10.8.0.
Users are recommended to upgrade to version 10.9.0, which fixes the issue. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Apache Wicket.
This issue affects Apache Wicket: from 8.0.0 through 8.17.0, from 9.0.0 through 9.22.0, from 10.0.0 through 10.8.0.
Users are recommended to upgrade to version 10.9.0, which fixes the issue. |
| FolderUploadsFileManager in Apache Wicket does not validate or sanitize the uploadFieldId parameter or the clientFileName
before constructing file paths, allowing an unauthenticated attacker to
write arbitrary files outside the intended upload directory or read
files from arbitrary locations on the server.
This issue affects Apache Wicket: from 8.0.0 through 8.17.0, from 9.0.0 through 9.22.0, from 10.0.0 through 10.8.0.
Users are recommended to upgrade to version 10.9.0, which fixes the issue. |
