| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The Post Grid Gutenberg Blocks for News, Magazines, Blog Websites – PostX plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'inputPlaceHolder' parameter in all versions up to, and including, 5.0.13 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A race condition in JCacheCodeDataProvider allows an attacker to redeem a single authorization code multiple times via concurrent requests, resulting in the issuance of multiple distinct, valid access tokens. Users are recommended to upgrade to versions 4.2.3, 4.1.8 or 3.6.12, which fix this issue. |
| In Apache CXF's OAuth2 Dynamic Client Registration endpoint, the authorization server accepts and stores the `scope` value supplied in the client registration request verbatim, without validating it against an AS-defined allowlist. This could lead to a client self-assigning privileged scopes at registration time. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| Apache CXF's JwtRequestCodeFilter copies all claims from a signed request JWT into the authorization parameter map without excluding security-sensitive parameters. A client that can produce a validly-signed request JWT (e.g., one whose client_secret is known or compromised) can thereby substitute the code_challenge, code_challenge_method, nonce, and state values that were set in the outer HTTP request, undermining PKCE integrity and OpenID Connect replay protection. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| Apache CXF’s OIDC relying-party token validation could accept self-issued ID tokens without enforcing required claim checks (issuer/subject/audience/time and sub_jwk binding), enabling authentication bypass with crafted tokens. However, note that self-issued ID tokens are not accepted by default in the validator. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fixes this issue. |
| In Apache CXF's DefaultEncryptingCodeDataProvider, a captured authorization code can be redeemed an unlimited number of times due to a flaw in the implementation of the removeCodeGrant functionality. This violates the RFC requirement that "The authorization code MUST NOT be used more than once." Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| In Apache CXF's DefaultEncryptingOAuthDataProvider, revoked access tokens still decrypt successfully, and TokenIntrospectionService reports active:true. The same applies to refresh tokens. This violates the RFC stipulations that 'The authorization server MUST invalidate the token.' and 'introspection of a revoked token MUST return {"active":false}'. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| A flaw was found in Quay. When an organization acts as a proxy cache, and a user or robot pulls an image that hasn't been mirrored yet, they are granted "Admin" permissions on the newly created repository. |
| A flaw was found in the Quay registry. While the image labels created through Quay undergo validation both in the UI and backend by applying a regex (validation.py), the same validation is
not performed when the label comes from an image. This flaw allows an attacker to publish a malicious image to a public registry containing a script that can be executed via Cross-site scripting (XSS). |
| A container privilege escalation flaw was found in certain Container-native Virtualization images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| When Multi-Attribute Login is enabled, the login interface fails to consistently mask the existence of user accounts. For valid users, the server resolves and displays their canonical username, while for non-existent users, it echoes the original input. This occurs regardless of the validate_username configuration.
The discovery of valid usernames can increase the risk of brute force attacks, social engineering attacks, and targeted information leakage. Attackers can leverage this information to craft more effective phishing campaigns or social engineering tactics to compromise user accounts or extract sensitive data. |
| The PDF creation feature of Foxit PDF Services API supports referencing external files. Although local file access is restricted, an attacker could trigger an SSRF vulnerability by using URL redirection to bypass validation, leading to information disclosure. |
| Apache CXF reads a top-level WSDL through its hardened StaxUtils path, which disables XML DTDs and external entities. However, any <wsdl:import> or <xsd:import> referenced from that top-level WSDL is handed off to WSDL4J, which does not disable DOCTYPE declarations or external entities. As a result, the protections applied to the top-level document do not extend to imported documents, leaving imported WSDL/XSD content vulnerable to XML External Entity (XXE) attacks. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| Apache CXF's JMS transport deserializes the body of any inbound JMS ObjectMessage using native Java deserialization, with no type restrictions in place. Any attacker able to place a message on the service's JMS destination can submit a malicious serialized object, leading to denial of service or, if a suitable gadget class is on the classpath, remote code execution. The fix disables ObjectMessage deserialization by default, with a configuration switch to re-enable it if needed. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: intel-hid: Protect ACPI notify handler against recursion
Since commit e2ffcda16290 ("ACPI: OSL: Allow Notify () handlers to run on
all CPUs") ACPI notify handlers like the intel-hid notify_handler() may
run on multiple CPU cores racing with themselves.
On convertibles and detachables (matched by DMI chassis-type 31 and 32 in
dmi_auto_add_switch[]) the SW_TABLET_MODE input device is registered
lazily from notify_handler() on the first tablet-mode event, via
intel_hid_switches_setup(). When two such events race on different CPUs
both can pass the !priv->switches check and register the priv->switches
input device twice, resulting in a duplicate sysfs entry and a subsequent
NULL pointer dereference.
This is the same class of bug fixed by commit e075c3b13a0a ("platform/x86:
intel-vbtn: Protect ACPI notify handler against recursion") for the
sibling intel-vbtn driver.
Protect intel-hid notify_handler() from racing with itself with a mutex
to fix this. |
| An incomplete fix for CVE-2026-50645 means that it is still possible to perform a denial of service attack on Apache CXF by sending a message with many attachment headers. Users are recommended to upgrade to versions 4.2.3 or 4.1.8 or 3.6.12, which fix this issue. |
| Apache CXF allows to control the maximum attachment size via the "attachment-max-size". Prior to Apache CXF 4.2.3 and 4.1.8 and 3.6.12, there was no default placed on this size, meaning that a denial of service attack is possible if the user doesn't explicitly set the limit. Users should update to Apache CXF 4.2.3 or 4.1.8 or 3.6.12 which fixes this problem by imposing a default attachment size limit of 50mb. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: hid-lenovo-go: cancel cfg_setup work in hid_go_cfg_remove()
hid_go_cfg_probe() initialises drvdata.go_cfg_setup and schedules it
to run 2 ms later:
INIT_DELAYED_WORK(&drvdata.go_cfg_setup, &cfg_setup);
schedule_delayed_work(&drvdata.go_cfg_setup, msecs_to_jiffies(2));
cfg_setup() dereferences drvdata.hdev to issue MCU command requests.
hid_go_cfg_remove() tears down sysfs and stops the HID device, but
never drains the delayed work. If the device is unbound within the
2 ms scheduling delay (a probe failure rolling back via remove, or a
fast rmmod after probe), the work fires after hid_destroy_device()
has dropped its reference and released the underlying hdev struct,
leaving cfg_setup() with a stale drvdata.hdev pointer.
Mirror the sibling driver hid-lenovo-go-s.c, whose hid_gos_cfg_remove()
already calls cancel_delayed_work_sync() on its analogous work, and
drain go_cfg_setup at the top of hid_go_cfg_remove(). The cancel
must come before guard(mutex)(&drvdata.cfg_mutex) because cfg_setup()
acquires that mutex; reversing the order would deadlock. |
| Exposure of Sensitive System Information to an Unauthorized Control Sphere vulnerability in Chouby Polylang and Chouby Polylang Pro allows Retrieve Embedded Sensitive Data.
This issue affects Polylang: through 3.8.5; Polylang Pro: through 3.8.5. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: drain bus_reset work on device removal
brcmf_fw_crashed() and the debugfs "reset" entry both schedule
drvr->bus_reset, whose callback recovers drvr through container_of()
and dereferences it. The removal path frees drvr (brcmf_free ->
wiphy_free) without draining the work, so a bus_reset callback pending
or running during removal can outlive drvr.
Cancellation cannot live in brcmf_detach() or brcmf_free(): the work
callback reaches teardown through the bus .reset op (PCIe
brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset ->
brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for
the running work and deadlock.
Add a per-bus mutex (bus_reset_lock) and route all arming through
brcmf_bus_schedule_reset(), which under the lock skips when the bus is
marked removing. Each bus remove entry calls
brcmf_bus_cancel_reset_work(), which under the same lock sets removing
and cancels the work. Holding the mutex across cancel_work_sync() makes
the set-removing + drain step atomic. Every producer reaches the arming
path from process context -- the PCIe firmware-halt notification runs in
the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail
path runs from the data workqueue -- so the mutex is taken only in
sleepable contexts. Where applicable the remove entry first stops the
firmware-crash producer: on PCIe mask the mailbox and synchronize_irq;
on SDIO unregister the bus interrupt and cancel the data worker, which
also reports firmware halts through brcmf_fw_crashed(). The mutex is
initialized at bus allocation. The SDIO suspend power-off path frees
drvr through the same brcmf_sdiod_remove() and takes the same lock;
resume re-allows the work only on a successful re-probe.
Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire
before brcmf_attach() wires up drvr, and it dereferences drvr
(bphy_err/brcmf_dev_coredump) before reaching the arming gate.
The bus_reset work is shared across buses, so the drain is applied to
every remove path: PCIe (the .reset op introduced by the Fixes commit),
SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the
debugfs "reset" entry). cancel_work_sync() drains a running or pending
bus_reset work item before removal frees drvr, and patch 1/2 makes the
scratch-buffer release safe when reset teardown has already released
those DMA buffers.
This patch fixes the lifetime of the bus_reset work item itself. It does
not attempt to address the separate, pre-existing lifetime of the
asynchronous firmware completion started by the PCIe reset path. That
callback needs its own lifetime/ownership protocol and is being tracked
separately.
This issue was found by an in-house static analysis tool. |
