| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An attacker could obtain firmware files and reverse engineer their
intended use leading to loss of confidentiality and integrity of the
hardware devices enabled by the Qardio iOS and Android applications. |
| An information-disclosure vulnerability exists in Fortra's GoAnywhere MFT application prior to version 7.7.0 that allows external access to the resources in certain admin root folders. |
| The ReadFile endpoint of the firmware for Mennekes Smart / Premium Chargingpoints can be abused to read arbitrary files from the underlying OS. |
| The GLPI Inventory Plugin handles various types of tasks for GLPI agents, including network discovery and inventory (SNMP), software deployment, VMWare ESX host remote inventory, and data collection (files, Windows registry, WMI). Versions prior to 1.5.0 have an improper access control vulnerability. Version 1.5.0 fixes the vulnerability. |
| NVIDIA Installer for Windows contains a vulnerability where an attacker may be able to escalate privileges. A successful exploit of this vulnerability may lead to escalation of privileges, denial of service, code execution, information disclosure and data tampering. |
| Rapid7 Velociraptor MSI Installer versions below 0.73.3 suffer from a vulnerability whereby it creates the installation directory with WRITE_DACL permission to the BUILTIN\\Users group. This allows local users who are not administrators to grant themselves the Full Control permission on Velociraptor's files. By modifying Velociraptor's files, local users can subvert the binary and cause the Velociraptor service to execute arbitrary code as the SYSTEM user, or to replace the Velociraptor binary completely. This issue is fixed in version 0.73.3. |
| A vulnerability was found in Casdoor up to 1.335.0. It has been classified as problematic. Affected is an unknown function of the file /conf/app.conf of the component Configuration File Handler. The manipulation leads to files or directories accessible. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. VDB-266838 is the identifier assigned to this vulnerability. NOTE: The vendor was contacted early about this disclosure but did not respond in any way. |
| Local File Inclusion vulnerability in Ready's attachment upload panel allows low privileged user to provide link to a local file using the file:// protocol thus allowing the attacker to read content of the file. This vulnerability can be use to read content of system files. |
| A directory listing issue in the baserCMS plugin in D-ZERO CO., LTD. BurgerEditor and BurgerEditor Limited Edition before 2.25.1 allows remote attackers to obtain sensitive information by exposing a list of the uploaded files. |
| Multiple Brother driver installers for Windows contain a privilege escalation vulnerability. If exploited, an arbitrary program may be executed with the administrative privilege. As for the details of affected product names, model numbers, and versions, refer to the information provided by the respective vendors listed under [References]. |
| wolfictl is a command line tool for working with Wolfi. A git authentication issue in versions prior to 0.16.10 allows a local user’s GitHub token to be sent to remote servers other than `github.com`. Most git-dependent functionality in wolfictl relies on its own `git` package, which contains centralized logic for implementing interactions with git repositories. Some of this functionality requires authentication in order to access private repositories. A central function `GetGitAuth` looks for a GitHub token in the environment variable `GITHUB_TOKEN` and returns it as an HTTP basic auth object to be used with the `github.com/go-git/go-git/v5` library. Most callers (direct or indirect) of `GetGitAuth` use the token to authenticate to github.com only; however, in some cases callers were passing this authentication without checking that the remote git repository was hosted on github.com. This behavior has existed in one form or another since commit 0d06e1578300327c212dda26a5ab31d09352b9d0 - committed January 25, 2023. This impacts anyone who ran the `wolfictl check update` commands with a Melange configuration that included a `git-checkout` directive step that referenced a git repository not hosted on github.com. This also impacts anyone who ran `wolfictl update <url>` with a remote URL outside of github.com. Additionally, these subcommands must have run with the `GITHUB_TOKEN` environment variable set to a valid GitHub token. Users should upgrade to version 0.16.10 to receive a patch. |
| The CAYIN Technology CMS lacks proper access control, allowing unauthenticated remote attackers to download arbitrary CGI files. |
| due to insufficient sanitazation in Vega’s `convert()` function when `safeMode` is enabled and the spec variable is an array. An attacker can craft a malicious Vega diagram specification that will allow them to send requests to any URL, including local file system paths, leading to exposure of sensitive information. |
| Longjing Technology BEMS API versions up to and including 1.21 contains an unauthenticated arbitrary file download vulnerability in the 'downloads' endpoint. The 'fileName' parameter is not properly sanitized, allowing attackers to craft traversal sequences and access sensitive files outside the intended directory. |
| A vulnerability in the command-line interface of EdgeConnect SD-WAN could allow an authenticated attacker to read arbitrary files within the system. Successful exploitation could allow an attacker to read sensitive data from the underlying file system. |
| A vulnerability was found in Mercury MNVR816 up to 2.0.1.0.5. It has been classified as problematic. This affects an unknown part of the file /web-static/. The manipulation leads to files or directories accessible. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Three Bitnami Helm charts mount Kubernetes Secrets under a predictable path (/opt/bitnami/*/secrets) that is located within the web server document root.
In affected versions, this can lead to unauthenticated access to sensitive credentials via HTTP/S. A remote attacker could retrieve these secrets by accessing specific URLs if the application is exposed externally. The issue affects deployments using the default value of usePasswordFiles=true, which mounts secrets as files into the container filesystem. |
| A vulnerability has been identified in SIPROTEC 5 6MD84 (CP300) (All versions < V9.80), SIPROTEC 5 6MD85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 6MD86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 6MD89 (CP300) (All versions >= V7.80 < V9.68), SIPROTEC 5 6MU85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7KE85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SA82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SA82 (CP150) (All versions < V9.80), SIPROTEC 5 7SA86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SA87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SD82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SD82 (CP150) (All versions < V9.80), SIPROTEC 5 7SD86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SD87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SJ81 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SJ81 (CP150) (All versions < V9.80), SIPROTEC 5 7SJ82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SJ82 (CP150) (All versions < V9.80), SIPROTEC 5 7SJ85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SJ86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SK82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SK82 (CP150) (All versions < V9.80), SIPROTEC 5 7SK85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SL82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7SL82 (CP150) (All versions < V9.80), SIPROTEC 5 7SL86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SL87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7SS85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7ST85 (CP300) (All versions < V9.68), SIPROTEC 5 7ST86 (CP300) (All versions < V9.80), SIPROTEC 5 7SX82 (CP150) (All versions < V9.80), SIPROTEC 5 7SX85 (CP300) (All versions < V9.80), SIPROTEC 5 7SY82 (CP150) (All versions < V9.80), SIPROTEC 5 7UM85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT82 (CP100) (All versions >= V7.80 < V8.90), SIPROTEC 5 7UT82 (CP150) (All versions < V9.80), SIPROTEC 5 7UT85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT86 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7UT87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VE85 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VK87 (CP300) (All versions >= V7.80 < V9.80), SIPROTEC 5 7VU85 (CP300) (All versions < V9.80), SIPROTEC 5 Compact 7SX800 (CP050) (All versions < V9.80). Affected devices do not properly limit the path accessible via their webserver. This could allow an authenticated remote attacker to read arbitrary files from the filesystem of affected devices. |
| Files or directories accessible to external parties issue exists in SS1 Ver.16.0.0.10 and earlier (Media version:16.0.0a and earlier). If exploited, uploaded files and SS1 configuration files may be accessed by a remote unauthenticated attacker. |
| cgi-bin/fdmcgiwebv2.cgi on Swissphone DiCal-RED 4009 devices allows an authenticated attacker to gain access to arbitrary files on the device's file system. |