| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, When no CA bundle is available, ssl_options/1 falls back to [{verify, verify_none}] with no warning. An attacker in a man-in-the-middle position can forge the JWKS response, which leads the broker to accept arbitrary JWTs. Preconditions include The OAuth2 plugin must be in use with no cacertfile configured and the OS CA bundle empty or unreadable (for example, in a minimal container), and the attacker must hold a network man-in-the-middle position.. This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| RabbitMQ is a messaging and streaming broker. Prior to versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0, The trust-store plugin installs a verify_fun that overrides {bad_cert, unknown_ca} / {bad_cert, selfsigned_peer} when the presented cert "matches" a whitelisted one. The match key is extract_issuer_id/1 → public_key:pkix_issuer_id/2 → {IssuerName, SerialNumber} , both fields are taken verbatim from the presented certificate body and contain no public-key, SKI, fingerprint or signature material. is_whitelisted/1 is a pure ets:member lookup; the stored full DER is used only for list/0 display and is never compared against the presented cert. cacerts is [], so the whitelisted cert is never used as a trust anchor for path validation either. TLS client-authentication bypass: an attacker who knows the issuer DN + serial of any whitelisted certificate can connect with a forged self-signed cert. Preconditions include rabbitmq_trust_store plugin enabled and used as the TLS verify_fun Attacker knows or can guess the {Issuer, Serial} of at least one whitelisted cert (non-secret; exposed via CLI/logs/any cert copy). This issue is fixed in versions 3.13.15, 4.0.20, 4.1.11, 4.2.6, and 4.3.0. |
| A vulnerability was detected in Trusted Domain Project OpenDMARC up to 1.4.2. Affected is the function opendmarc_policy_query_dmarc of the component Multi-Record Set Handler. The manipulation results in authentication bypass by spoofing. The attack can be executed remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw was found in gnutls. When validating certificates, an oversized Subject Alternative Name (SAN) could cause the validation process to incorrectly fall back to checking the Common Name (CN) field. This could allow a remote attacker to bypass proper certificate validation, potentially leading to spoofing or man-in-the-middle attacks. |
| A flaw was found in gnutls. This vulnerability occurs because permitted name constraints were incorrectly ignored when previous Certificate Authorities (CAs) only had excluded name constraints. A remote attacker could exploit this to bypass critical name constraint checks during certificate validation. This bypass could lead to the acceptance of invalid certificates, potentially enabling spoofing or man-in-the-middle attacks against affected systems. |
| A flaw was found in gnutls. A remote attacker could exploit this vulnerability by presenting a specially crafted certificate that contains Uniform Resource Identifier (URI) or Service (SRV) Subject Alternative Names (SANs). This could cause the certificate validation process to incorrectly fall back to checking DNS hostnames against the Common Name (CN), potentially allowing the attacker to spoof legitimate services or intercept sensitive information. |
| @grpc/grpc-js implements the core functionality of gRPC purely in JavaScript, without a C++ addon. Prior to 1.13.6 and 1.14.5, getAuthContext does not distinguish authorized from unauthorized peer certificates when server credentials set requireClientCertificate to false. When applications use the returned authentication context, they can treat an unauthorized certificate as authorized, causing improper authentication. @grpc/grpc-js-xds can reach this condition when RBAC authentication is enabled in affected configurations. This issue is fixed in version 1.14.5 and 1.13.6. |
| The Premium Packages WordPress plugin before 7.2.1 does not verify PayPal's webhook signature before processing payment and subscription notifications, allowing unauthenticated attackers to forge payment confirmations and subscription-cancellation events against any order whose transaction id they know. |
| A cross-tenant authorization issue was discovered in SUSE Rancher Fleet. During agent-initiated cluster registration, cluster labels supplied by the registering agent, including labels in the reserved management.cattle.io/ namespace such as the cluster display name label, were applied to the resulting upstream Cluster object. Because Fleet resolves GitRepo and Bundle targets from those cluster labels, a party able to register a cluster into a Fleet workspace namespace shared with other tenants could cause its own cluster to satisfy targeting rules that administrators intended for a different cluster.
This affects SUSE Rancher Fleet 0.16 before 0.16.1, 0.15 before 0.15.6, 0.14 before 0.14.10, 0.13 before 0.13.15, 0.12 before 0.12.19 and older versions. |
| AnyIO is a high level asynchronous concurrency and networking framework that works on top of either Trio or asyncio. Prior to 4.14.2, connect_tcp() and TLSStream.wrap() can validate internationalized host names after the standard library converts them with IDNA 2003 instead of IDNA 2008. When a connection to a non-ASCII domain is hijacked or redirected, an attacker can obtain a legitimate certificate for the different ASCII hostname produced by IDNA 2003 and present it to the client, causing the malicious endpoint's certificate to validate. This issue is fixed in version 4.14.2. |
| Improper Following of a Certificate's Chain of Trust vulnerability in Erlang OTP public_key (pubkey_cert module) allows a non-CA certificate to be accepted as an intermediate issuer, enabling certificate chain forgery.
In lib/public_key/src/pubkey_cert.erl, pubkey_cert:validate_extensions/7 contains two flaws that together allow a certificate with basicConstraints cA:false and no keyUsage extension to be used as an intermediate issuer in a chain passed to public_key:pkix_path_validation/3: the cA:false clause recurses into the remaining extensions without rejecting the certificate when it is in issuer position, and the keyUsage check only fires when the extension is present, so a certificate lacking keyUsage entirely bypasses the keyCertSign enforcement.
Any party holding an end-entity certificate with basicConstraints cA:false and no keyUsage extension, issued by any CA in the victim's trust store, can use that certificate's private key to sign forged leaf certificates for arbitrary identities. public_key:pkix_path_validation/3 accepts the resulting chain, and by extension every TLS or mTLS endpoint built on the OTP ssl application that relies on the default verifier is affected, including server identity verification on the client side and client certificate verification on mTLS servers.
This issue affects OTP from OTP 17.0 before OTP 26.2.5.21, OTP 27.3.4.12, OTP 28.5.0.1, and OTP 29.0.1, corresponding to public_key from 0.22 before 1.15.1.7, 1.17.1.3, 1.20.3.1, and 1.21.1. Whether OTP before OTP 17.0, corresponding to public_key before 0.22, is affected is unknown. |
| PHP's OpenSSL stream peer verification checks the certificate's subjectAltName entries first and, whenever no entry matches, falls back to the Common Name. RFC 6125 requires the CN to be ignored once the certificate presents any service identity, so a certificate carrying a non-matching DNS SAN was still accepted when its CN matched the requested peer_name. A certificate trusted by the client for one name can therefore be used to impersonate another. |
| Authentication Bypass by Capture-replay in Apache Roller 6.1.5 allows an attacker who captures a valid WSSE digest authentication header to replay it and gain the victim's AtomPub authority, because the authentication does not enforce nonce uniqueness or timestamp freshness. Only installations that enable the non-default AtomPub API with WSSE authentication and plaintext-compatible password storage are affected. Users are recommended to upgrade to Apache Roller 6.1.6 or later, which removes WSSE as an AtomPub authentication method; existing installations configured for WSSE fail closed until an administrator explicitly selects a supported authentication method. |
| An incorrect implementation of message filtering in xdg-dbus-proxy versions before 0.1.9 allows an attacker to bypass the intended message filtering on the D-Bus session bus by setting a reply serial number on non-reply messages. A malicious or compromised Flatpak app could use this to achieve arbitrary code execution outside its sandbox. |
| Improper OCSP response validation in the Snowflake Python, Go, JDBC, and Node.js drivers allowed a revoked TLS certificate to be accepted as valid, because OCSP responses were not reliably bound to the certificate being validated and definitive verification failures were treated as transient. A man-in-the-middle attacker holding a revoked certificate and its private key for a Snowflake or stage hostname could cause the driver to establish a TLS session to the attacker-controlled endpoint anyway, allowing the attacker to read and modify data transmitted within that connection. Successful exploitation requires that on-path position and the corresponding private key, and impact is limited to data carried within the intercepted connection. The fix is available in Snowflake Connector for Python v4.7.3, Snowflake Go Driver v2.2.0, Snowflake JDBC Driver v4.3.4 (including the snowflake-jdbc-fips and snowflake-jdbc-thin), and Snowflake Node.js Driver v3.3.0. Users must manually upgrade. |
| Contrast before 1.16.0 is susceptible to remote attestation relay attacks. Contrast accepted any TEE attestation report that verified correctly and contained the expected firmware patch levels and software measurements, regardless of which machine produced it, so attestation was not bound to specific, physically trusted hardware. An attacker who can both intercept network traffic between the CLI and the Coordinator (or between the Coordinator and an attested component) and forge reports or extract secrets from any single TEE machine under their physical control can relay such a report to impersonate a Contrast Coordinator or a Contrast workload, defeating identity verification in Contrast's attested TLS (aTLS). |
| wolfSSL versions 5.9.2 and earlier contain a flaw in the X.509 certificate validation logic where it fails to properly enforce NameConstraints extensions when there is an unconstrained CA tier between a name-constrained intermediate CA and the leaf certificate. wolfSSL incorrectly accepted certificates for hostnames they shouldn't be allowed to cover, due to a chain-walking state-machine bug that resets the validation state when encountering an intermediate without NameConstraints, thereby bypassing cryptographic delegation controls. This defect exists in the default build configuration that makes use of certificates where name constraint extensions are used. Thanks to Jack Lloyd, PathDiff, and Ben Smyth for reporting the issue. |
| When an application enables both OCSP and CRL revocation checking on one WOLFSSL_CTX or certificate manager, wolfSSL skips the CRL check for any peer certificate that carries no Authority Information Access OCSP URL, and accepts a certificate the loaded CRL lists as revoked. The soft-fail policy for a missing responder collapses the OCSP result onto success before the code decides whether the CRL fallback is still needed, so "no responder exists" becomes indistinguishable from "the responder answered good". Affected builds define both HAVE_OCSP and HAVE_CRL: --enable-ocsp --enable-crl directly, and implicitly --enable-all, --enable-distro, --enable-curl, --enable-nginx, --enable-haproxy, --enable-stunnel, --enable-lighty, --enable-wpas, --enable-strongswan, --enable-mosquitto, --enable-jni, --enable-openvpn and --enable-krb. An application is affected only if it calls both wolfSSL_CTX_EnableOCSP() (or wolfSSL_EnableOCSP() / wolfSSL_CertManagerEnableOCSP()) and wolfSSL_CTX_EnableCRL() (or the equivalents) with a CRL loaded; an application that uses OCSP stapling alone through wolfSSL_CTX_EnableOCSPStapling() is not affected, because that sets up a separate OCSP instance. The defect sits in ProcessPeerCerts() and is reachable over TLS 1.0 through TLS 1.3 and DTLS, both on a client verifying a server certificate and on a server verifying a client certificate under mutual or post-handshake authentication. When the skipped check falls on a chain certificate rather than the leaf, the unchecked intermediate is promoted into the certificate manager and stays a trusted signer for every later connection on that context, so an affected long-running process needs its WOLFSSL_CTX torn down and not only its library replaced. All wolfSSL versions from 5.9.2 and earlier are affected; on versions 5.9.1 and 5.9.2 the WOLFSSL_OCSP_CHECKALL configuration fails closed with OCSP_NEED_URL, which leaves wolfSSL_CTX_EnableOCSP() without CHECKALL as the exposed configuration on 5.9.2. |
| MatchTrustedPeer ignores the public key used, leading to forged CA clones passing verification. Affected builds are any that enable the macro WOLFSSL_TRUST_PEER_CERT and load CA certificates with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert(). The peer must know the certificates being loaded to either of those APIs to take advantage of the issue. When OPENSSL_COMPATIBLE_DEFAULTS is also defined this widens the affected API to include all CA certificate loading. Both macros are defined when using autoconf builds such as (nginx, haproxy, stunnel, wpas, apache httpd, hitch, bind, rsyslog, ffmpeg, all, distro). When the certificate is listed as a trusted peer certificate the issue previously allowed for a malicious (D)TLS server to bypass authentication once knowing which CA’s the client would accept. This also affects mutual authentication cases where the client knows which CA’s the server has loaded. If building with any of these configurations and using (D)TLS where the loaded CA’s could be known and authentication of the peer is desired, users should either: update to the latest wolfSSL version, apply the fix patch, or use the configure flag --disable-openssl-compatible-defaults and not load CA’s with wolfSSL_CTX_trust_peer_cert() or wolfSSL_trust_peer_cert() to mitigate the issue. |
| A failed X509_verify_cert call permanently plants an unverified attacker CA in the shared CertManager, bypassing certificate validation in every type-blind sibling consumer (native TLS, OCSP, CRL, direct CM verify). This affects version 5.8.4 through 5.9.2 of wolfSSL with the macros (OPENSSL_EXTRA && !NO_CERTS && !WOLFCRYPT_ONLY) defined or built with --enable-opensslextra and the application is specifically making calls to the X509_verify_cert function. |
