Export limit exceeded: 409360 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409360 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68142 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: geneve: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the sticky underlay netns geneve->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in geneve->net can rewrite a geneve device whose underlay lives in geneve->net. geneve_changelink() applies the new configuration against geneve->net: geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair reopen the underlay sockets in that netns (geneve_sock_add() uses geneve->net), so the same reasoning as the tunnel changelink series applies here. Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of the op before any attribute is parsed, matching ipgre_changelink() and the rest of the "require CAP_NET_ADMIN in the device netns for changelink" series. Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68141 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: net/af_iucv: fix NULL deref in afiucv_hs_callback_syn() afiucv_hs_callback_syn() allocates the child socket with GFP_ATOMIC. If the allocation fails, nsk is NULL. The connection-refused path is entered when the listen state check fails, the accept backlog is full, or nsk is NULL. The code unconditionally calls iucv_sock_kill(nsk) in that path. iucv_sock_kill() does not accept a NULL socket pointer and immediately dereferences sk via sock_flag(sk, SOCK_ZAPPED). When nsk is NULL, calling iucv_sock_kill(nsk) results in a NULL pointer dereference. Only call iucv_sock_kill() when a child socket was successfully allocated. | ||||
| CVE-2026-68140 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued. | ||||
| CVE-2026-68129 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix Rx queue stall on alloc failure When the system is under extreme memory pressure, page allocations can fail during the Rx buffer refill loop. If the number of buffers posted to hardware falls below a critical low threshold and the refill loop exits due to allocation failures, the queue can stall: 1. The device drops incoming packets because there are no descriptors. 2. Since no packets are processed, no Rx completions are generated. 3. Because no completions occur, NAPI is never scheduled, preventing the refill loop from running again even after memory is freed. This results in a permanent queue stall. Resolve this by introducing a starvation recovery timer for each Rx queue. If the number of buffers posted to hardware falls below a critical low threshold, start a timer to periodically reschedule NAPI. Once NAPI runs and successfully refills the queue above the threshold, the timer is not rescheduled. The threshold is set to 32 because a single maximum-sized Receive Segment Coalescing (RSC) packet can consume up to 19 descriptors in the Rx path. Lower thresholds (such as 8 or 16) would be insufficient to process a complete maximum-sized RSC packet, risking packet drops or unexpected hardware behavior under memory pressure. Setting the threshold to 32 guarantees a safe margin to handle at least one full RSC packet. | ||||
| CVE-2026-68128 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | ||||
| CVE-2026-68127 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | ||||
| CVE-2026-68121 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | ||||
| CVE-2026-68118 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | ||||
| CVE-2026-68108 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) | ||||
| CVE-2026-68104 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) | ||||
| CVE-2026-68096 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: lock_two_directories+0x13f/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&inode->i_sb->s_type->i_mutex_dir_key/1); lock(&inode->i_sb->s_type->i_mutex_dir_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by mv/5099: #0: ffff888112a9c440 (sb_writers#13) at: do_renameat2+0x34c/0xbc0 #1: ffff888112a9c790 (&type->s_vfs_rename_key#3) at: do_renameat2+0x415/0xbc0 #2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1) at: lock_two_directories+0x13f/0x2b0 #3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5) at: lock_two_directories+0x175/0x2b0 #4: ffffffffb3a1fb10 (&fsnotify_mark_srcu) at: fsnotify+0x454/0x28a0 #5: ffffffffaf886230 (audit_filter_mutex) at: audit_update_watch+0x36/0x11e0 stack backtrace: Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_deadlock_bug.cold+0xbd/0xca validate_chain+0x83a/0xf00 __lock_acquire+0xcac/0x1d20 lock_acquire.part.0+0x11b/0x360 down_write_nested+0x9f/0x230 __kern_path_locked+0x10a/0x2f0 kern_path_locked+0x26/0x40 audit_alloc_mark+0xfb/0x4f0 audit_dupe_exe+0x6c/0xe0 audit_dupe_rule+0x6c2/0xc00 audit_update_watch+0x4cc/0x11e0 audit_watch_handle_event+0x12c/0x1b0 send_to_group+0x5d0/0x8b0 fsnotify+0x615/0x28a0 fsnotify_move+0x1d8/0x630 vfs_rename+0xdcd/0x1df0 do_renameat2+0x9d4/0xbc0 __x64_sys_renameat+0x192/0x260 do_syscall_64+0x92/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0491fe8c4e Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89 RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c </TASK> The aforementioned deadlock can be consistently reproduced by running the script below: audit-dupe-exe-deadlock.sh -------------------------- #!/bin/bash auditctl -D mkdir -p /tmp/foo touch /tmp/file auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr mv /tmp/file /tmp/foo/file rm -Rf /tmp/foo This patch fixes the issue by introducing struct audit_watch_ctx to pass the fsnotify event context down to audit_alloc_mark(). By utilizing the already-resolved directory inode provided by the event, we bypass the kern_path_parent() path resol ---truncated--- | ||||
| CVE-2026-68091 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-68082 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | ||||
| CVE-2026-66085 | 1 Unisoc | 1 Modem | 2026-10-16 | 5.5 Medium |
| In modem, there is a possible information disclosure due to missing filtering of sensitive data in crash dumps. This could lead to local information disclosure with no additional execution privileges needed. | ||||
| CVE-2026-64599 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: crypto: amlogic - avoid double cleanup in meson_crypto_probe() When meson_allocate_chanlist() fails after a partial allocation, it already unwinds the allocated chanlist state through its local error path. meson_crypto_probe() then jump to error_flow and calls meson_free_chanlist() again, causing the same per-flow resources to be torn down twice. In the reproduced failure path, the second teardown re-entered crypto_engine_exit() on an already destroyed worker and KASAN reported a slab-use-after-free in kthread_destroy_worker(). Prevent double-free by handling partial allocation failures locally within meson_allocate_chanlist() and skipping the outer cleanup path. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. The bug was reproduced in a QEMU x86_64 guest booted with KASAN on v7.1, using the reproducer under tools/testing/meson_crypto_probe. The reproducer forces the second dma_alloc_attrs() call in the gxl-crypto probe path to return NULL, making meson_allocate_chanlist() fail after partial initialization. On the unpatched kernel this reliably triggered a slab-use-after-free. With this fix applied, the same reproducer no longer emits any KASAN report and the probe fails cleanly with -ENOMEM. ================================================================== BUG: KASAN: slab-use-after-free in kthread_destroy_worker+0xb2/0xd0 Read of size 8 at addr ff1100010c057a68 by task insmod/265 CPU: 1 UID: 0 PID: 265 Comm: insmod Tainted: G O 7.1.0-rc2-00376-g810af9adc907-dirty #10 PREEMPT(lazy) Tainted: [O]=OOT_MODULE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x68/0xa0 print_report+0xcb/0x5e0 ? __virt_addr_valid+0x21d/0x3f0 ? kthread_destroy_worker+0xb2/0xd0 ? kthread_destroy_worker+0xb2/0xd0 kasan_report+0xca/0x100 ? kthread_destroy_worker+0xb2/0xd0 kthread_destroy_worker+0xb2/0xd0 meson_crypto_probe+0x4d0/0xc10 [amlogic_gxl_crypto] platform_probe+0x99/0x140 really_probe+0x1c6/0x6a0 ? __pfx___device_attach_driver+0x10/0x10 __driver_probe_device+0x248/0x310 ? acpi_driver_match_device+0xb0/0x100 driver_probe_device+0x48/0x210 ? __pfx___device_attach_driver+0x10/0x10 __device_attach_driver+0x160/0x320 bus_for_each_drv+0x104/0x190 ? __pfx_bus_for_each_drv+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 __device_attach+0x19d/0x3b0 ? __pfx___device_attach+0x10/0x10 ? do_raw_spin_unlock+0x53/0x220 device_initial_probe+0x78/0xa0 bus_probe_device+0x5b/0x130 device_add+0xcfd/0x1430 ? __pfx_device_add+0x10/0x10 ? insert_resource+0x34/0x50 ? lock_release+0xc9/0x290 platform_device_add+0x24e/0x590 ? __pfx_meson_crypto_probe_repro_init+0x10/0x10 [meson_crypto_probe_repro] meson_crypto_probe_repro_init+0x330/0xff0 [meson_crypto_probe_repro] do_one_initcall+0xc0/0x450 ? __pfx_do_one_initcall+0x10/0x10 ? _raw_spin_unlock_irqrestore+0x2c/0x50 ? __create_object+0x59/0x80 ? kasan_unpoison+0x27/0x60 do_init_module+0x27b/0x7d0 ? __pfx_do_init_module+0x10/0x10 ? kasan_quarantine_put+0x84/0x1d0 ? kfree+0x32c/0x510 ? load_module+0x561e/0x5ff0 load_module+0x54fe/0x5ff0 ? __pfx_load_module+0x10/0x10 ? security_file_permission+0x20/0x40 ? kernel_read_file+0x23d/0x6e0 ? mmap_region+0x235/0x4a0 ? __pfx_kernel_read_file+0x10/0x10 ? __file_has_perm+0x2c0/0x3e0 init_module_from_file+0x158/0x180 ? __pfx_init_module_from_file+0x10/0x10 ? __lock_acquire+0x45a/0x1ba0 ? idempotent_init_module+0x315/0x610 ? lock_release+0xc9/0x290 ? lock ---truncated--- | ||||
| CVE-2026-64586 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: drain bus_reset work on device removal brcmf_fw_crashed() and the debugfs "reset" entry both schedule drvr->bus_reset, whose callback recovers drvr through container_of() and dereferences it. The removal path frees drvr (brcmf_free -> wiphy_free) without draining the work, so a bus_reset callback pending or running during removal can outlive drvr. Cancellation cannot live in brcmf_detach() or brcmf_free(): the work callback reaches teardown through the bus .reset op (PCIe brcmf_pcie_reset -> brcmf_detach; SDIO brcmf_sdio_bus_reset -> brcmf_sdiod_remove -> brcmf_free), so cancelling there would wait for the running work and deadlock. Add a per-bus mutex (bus_reset_lock) and route all arming through brcmf_bus_schedule_reset(), which under the lock skips when the bus is marked removing. Each bus remove entry calls brcmf_bus_cancel_reset_work(), which under the same lock sets removing and cancels the work. Holding the mutex across cancel_work_sync() makes the set-removing + drain step atomic. Every producer reaches the arming path from process context -- the PCIe firmware-halt notification runs in the threaded IRQ handler (brcmf_pcie_isr_thread) and the SDIO hostmail path runs from the data workqueue -- so the mutex is taken only in sleepable contexts. Where applicable the remove entry first stops the firmware-crash producer: on PCIe mask the mailbox and synchronize_irq; on SDIO unregister the bus interrupt and cancel the data worker, which also reports firmware halts through brcmf_fw_crashed(). The mutex is initialized at bus allocation. The SDIO suspend power-off path frees drvr through the same brcmf_sdiod_remove() and takes the same lock; resume re-allows the work only on a successful re-probe. Also guard brcmf_fw_crashed() against a NULL bus_if/drvr: it can fire before brcmf_attach() wires up drvr, and it dereferences drvr (bphy_err/brcmf_dev_coredump) before reaching the arming gate. The bus_reset work is shared across buses, so the drain is applied to every remove path: PCIe (the .reset op introduced by the Fixes commit), SDIO (arms the same work through brcmf_fw_crashed()), and USB (via the debugfs "reset" entry). cancel_work_sync() drains a running or pending bus_reset work item before removal frees drvr, and patch 1/2 makes the scratch-buffer release safe when reset teardown has already released those DMA buffers. This patch fixes the lifetime of the bus_reset work item itself. It does not attempt to address the separate, pre-existing lifetime of the asynchronous firmware completion started by the PCIe reset path. That callback needs its own lifetime/ownership protocol and is being tracked separately. This issue was found by an in-house static analysis tool. | ||||
| CVE-2026-64582 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rxe: Fix a use-after-free problem in rxe_mmap rxe_mmap() removes a rxe_mmap_info struct from the pending_mmaps list and releases pending_lock while the struct's kref is still at 1: list_del_init(&ip->pending_mmaps); spin_unlock_bh(&rxe->pending_lock); /* ref == 1, no lock held */ ret = remap_vmalloc_range(vma, ip->obj, 0); /* walks PTEs */ [...] rxe_vma_open(vma); /* kref_get, ref → 2 */ remap_vmalloc_range_partial() walks PTEs without any lock. A concurrent DESTROY_CQ ioctl on another CPU calls: kref_put(&q->ip->ref, rxe_mmap_release) /* ref 1→0 */ vfree(ip->obj) /* clears vmalloc PTEs mid-walk */ kfree(ip) /* frees rxe_mmap_info */ This yields: 1. Kernel crash, vmalloc_to_page() returns NULL when vfree wins the per-PTE race -> vm_insert_page(NULL) → GPF in validate_page_before_insert 2. Page UAF, vmalloc_to_page() reads a stale PTE before vfree clears it. User VMA holds a PTE to a free'd page which might eventually get reallocated later by vmalloc which allows the attacker to get a clean page-level UAF. It is worth noting that even though a page-level UAF is possible given the strong primitive, it is statistically very difficult to achieve given the very short time window (after the last insert_page and before the kref_get). The call trace are as below: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] CPU: 0 UID: 1000 PID: 413 Comm: poc Not tainted 7.0.0-rc5-dirty #28 PREEMPT(lazy) Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 RIP: 0010:validate_page_before_insert+0x32/0x300 Code: e5 41 57 41 56 49 89 fe 41 55 41 54 53 48 89 f3 e8 93 b5 a3 ff 48 8d 7b 08 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 7b 02 00 00 4c 8b 63 08 31 ff 4d 89 e5 41 83 e5 RSP: 0018:ffff88811b15f2f0 EFLAGS: 00000202 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008 RBP: ffff88811b15f318 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffff8881181eee00 R13: 0000000000000000 R14: ffff8881181eee00 R15: ffff8881181eee20 FS: 00007b1e000f76c0(0000) GS:ffff8884268e0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007b1e00a24ac0 CR3: 0000000116eb3000 CR4: 00000000000006f0 Call Trace: <TASK> insert_page+0x8f/0x190 ? __pfx_insert_page+0x10/0x10 ? kasan_save_alloc_info+0x38/0x60 vm_insert_page+0x2e7/0x400 remap_vmalloc_range_partial+0x212/0x3e0 remap_vmalloc_range+0x6e/0xb0 ? __kasan_check_write+0x14/0x30 rxe_mmap+0x2e9/0x5d0 ib_uverbs_mmap+0x1ad/0x2c0 __mmap_region+0x12c2/0x2ad0 ? __pfx___mmap_region+0x10/0x10 ? __sanitizer_cov_trace_switch+0x58/0xb0 ? mas_prev_slot+0x360/0x39c0 ? __sanitizer_cov_trace_switch+0x58/0xb0 ? mas_next_slot+0x1e5b/0x2f40 ? __sanitizer_cov_trace_cmp8+0x18/0x30 ? unmapped_area_topdown+0x4dd/0x610 ? kfree+0x1b1/0x440 ? free_cpumask_var+0x16/0x30 ? __kasan_slab_free+0x7d/0xa0 ? __sanitizer_cov_trace_cmp8+0x18/0x30 mmap_region+0x2e6/0x3c0 do_mmap+0xa3e/0x12a0 ? __pfx_do_mmap+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? down_write_killable+0xba/0x160 ? __pfx_down_write_killable+0x10/0x10 ? __sanitizer_cov_trace_cmp4+0x16/0x30 vm_mmap_pgoff+0x2d4/0x4a0 ? __pfx_vm_mmap_pgoff+0x10/0x10 ? fget+0x1bf/0x270 ksys_mmap_pgoff+0x40c/0x690 ? __sanitizer_cov_trace_const_cmp4+0x16/0x30 ? __pfx_ksys_mmap_pgoff+0x10/0x10 ? __kasan_check_write+0x14/0x30 ? _raw_spin_trylock+0xbb/0x130 ? __pfx__raw_spin_trylock+0x10/0x10 __x64_sys_mmap+0x135/0x1e0 x64_sys_c ---truncated--- | ||||
| CVE-2026-64580 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm6: clear dst.dev on error to avoid double netdev_put in xfrm6_fill_dst() On the error path where in6_dev_get(dev) returns NULL, xfrm6_fill_dst() releases the device reference with netdev_put() but leaves xdst->u.dst.dev set. dst_destroy() later calls netdev_put(dst->dev) again, so the same net_device reference is released twice, underflowing its refcount (ref_tracker WARNING + "unregister_netdevice: waiting for <dev> to become free"). Clear xdst->u.dst.dev after the netdev_put(), the same way the XFRM device-offload paths xfrm_dev_state_add() and xfrm_dev_policy_add() in net/xfrm/xfrm_device.c NULL ->dev when releasing the reference on error. ref_tracker: reference already released. ref_tracker: allocated in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:86) ... udpv6_sendmsg (net/ipv6/udp.c:1696) ... ref_tracker: freed in: xfrm6_fill_dst (net/ipv6/xfrm6_policy.c:90) ... WARNING: lib/ref_tracker.c:322 at ref_tracker_free+0x58b/0x780 dst_destroy (net/core/dst.c:115) rcu_core handle_softirqs ... | ||||
| CVE-2026-64576 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: nexthop: initialize extack in nh_res_bucket_migrate() nh_res_bucket_migrate() passes an uninitialized netlink_ext_ack to call_nexthop_res_bucket_notifiers(). When nh_notifier_res_bucket_info_init() fails (e.g. the kzalloc returns -ENOMEM), the error is propagated back before any notifier sets extack._msg, and the error path formats the stale pointer with pr_err_ratelimited("%s\n", extack._msg). With CONFIG_INIT_STACK_NONE this dereferences uninitialized stack memory: Oops: general protection fault, probably for non-canonical address ... KASAN: maybe wild-memory-access in range [...] RIP: 0010:string (lib/vsprintf.c:730) vsnprintf (lib/vsprintf.c:2945) _printk (kernel/printk/printk.c:2504) nh_res_bucket_migrate (net/ipv4/nexthop.c:1816) nh_res_table_upkeep (net/ipv4/nexthop.c:1866) rtm_new_nexthop (net/ipv4/nexthop.c:3323) rtnetlink_rcv_msg (net/core/rtnetlink.c:7076) netlink_sendmsg (net/netlink/af_netlink.c:1900) Kernel panic - not syncing: Fatal exception Zero-initialize extack so _msg is NULL on error paths that never set it. | ||||
| CVE-2026-64574 | 1 Linux | 1 Linux Kernel | 2026-10-16 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: tear down new links on vif update error path When ieee80211_vif_update_links() adds new links it allocates a link container for each and calls ieee80211_link_init() (which registers the per-link debugfs files with file->private_data pointing into the container) and ieee80211_link_setup(). If the subsequent drv_change_vif_links() fails, the error path restores the old pointers and jumps to 'free', which frees the new containers but never removes their debugfs entries or stops the links. The debugfs files survive with file->private_data dangling at the freed container, so a later open()+read() (e.g. link-1/txpower) dereferences freed memory in ieee80211_if_read_link(), a use-after-free. The removal path already dismantles links correctly via ieee80211_tear_down_links(), which removes each link's keys and debugfs entries and calls ieee80211_link_stop(); the add path on the error branch does not. Commit be1ba9ed221f ("wifi: mac80211: avoid weird state in error path") hardened this same error path for the link-removal case (new_links == 0) but left the newly-added links' teardown unaddressed. drv_change_vif_links() can fail at runtime on MLO drivers (internal allocation / queue / firmware command failures). Remove the new links' debugfs entries and stop them before freeing. BUG: KASAN: slab-use-after-free in ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Read of size 8 at addr ffff888011290000 by task exploit/145 Call Trace: ... ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) short_proxy_read (fs/debugfs/file.c:373) vfs_read (fs/read_write.c:572) ksys_read (fs/read_write.c:716) do_syscall_64 (arch/x86/entry/syscall_64.c:94) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) ... Oops: general protection fault, probably for non-canonical address 0xdffffc000000000a RIP: 0010:ieee80211_if_read_link (net/mac80211/debugfs_netdev.c:127) Kernel panic - not syncing: Fatal exception | ||||