Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378800 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72117 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: fix data race on rx_stamp/rx_ifindex in bcm_rx_handler() For an rx op subscribed on all interfaces (ifindex == 0), the same op is registered once in the shared per-netns wildcard filter list, so bcm_rx_handler() can run concurrently on different CPUs for frames arriving on different net devices. op->rx_stamp and op->rx_ifindex were written before bcm_rx_update_lock was taken, allowing concurrent writers to race each other - including a torn store of the 64-bit rx_stamp on 32-bit platforms. Beyond a torn store bcm_send_to_user() must report the timestamp/ifindex of the very same frame whose content it is delivering. So the assignment is placed in the same unbroken bcm_rx_update_lock section as the content comparison. As a side effect, the RTR-request frame feature (which never reach bcm_send_to_user()) no longer updates rx_stamp/rx_ifindex, since only the notification path needs them. | ||||
| CVE-2026-72104 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional arguments as name/value pairs. A table that advertises one optional argument and supplies only a recognized option name, for example "cache_mode", reaches parse_cache_opts() with argc == 1. The parser consumes the name, decrements argc to zero, then calls dm_shift_arg() again for the value. dm_shift_arg() returns NULL when no arguments remain, and the following strcmp() dereferences that NULL pointer. Check that each recognized option has a value before consuming it. This keeps valid "cache_mode writeback" and "data_crc true/false" tables unchanged while making malformed tables fail during target construction with a precise missing-value error. | ||||
| CVE-2026-72101 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it. | ||||
| CVE-2026-72097 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix a possible NULL pointer dereference Fix a possible NULL pointer dereference dm_verity_loadpin_is_bdev_trusted if the device has no table. | ||||
| CVE-2026-72081 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: elx: efct: Fix I/O leak on unsupported additional CDB efct_dispatch_fcp_cmd() allocates an efct_io before dispatching an unsolicited FCP command. If the command has an unsupported additional CDB, the function returns -EIO before handing the IO to the SCSI layer. Free the allocated IO before returning from this error path. | ||||
| CVE-2026-72079 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix use-after-free and double-free in disconnect ims_pcu_disconnect() only intended to perform cleanup when the primary (control) interface is unbound. However, it currently relies on the interface class to distinguish between control and data interfaces. A malicious device could present a data interface with the same class as the control interface, leading to premature cleanup and potential use-after-free or double-free. Switch to verifying that the interface being disconnected is indeed the control interface. | ||||
| CVE-2026-72074 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix type confusion in CDC union descriptor parsing The driver currently trusts the bMasterInterface0 from the CDC union descriptor without verifying that it matches the interface being probed. This could lead to the driver overwriting the private data of another interface. Validate that the control interface found in the descriptor is indeed the one we are probing. | ||||
| CVE-2026-72070 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: libertas_tf: fix use-after-free in lbtf_free_adapter() lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does not wait for a running command_timer_fn() callback. lbtf_free_adapter() runs on the teardown path right before ieee80211_free_hw() frees priv, both in lbtf_remove_card() and in the probe error path. command_timer is armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent. command_timer_fn() dereferences priv. If a command times out as the device is removed, command_timer_fn() runs concurrently with teardown and dereferences priv after it has been freed. This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas: fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas driver. The libertas_tf variant has the identical pattern and was left unchanged. Use timer_delete_sync() so any in-flight callback completes before priv is freed. | ||||
| CVE-2026-72068 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: posix-cpu-timers: Use u64 multiplication in update_rlimit_cpu() update_rlimit_cpu() converts the RLIMIT_CPU value to nanoseconds with u64 nsecs = rlim_new * NSEC_PER_SEC; On 32-bit kernels both rlim_new (unsigned long) and NSEC_PER_SEC (1000000000L) are 32-bit, so the multiplication is performed in unsigned long and truncated for rlim_new > 4 seconds before being widened to u64. The same file already casts to u64 for the matching computation in check_process_timers(): u64 softns = (u64)soft * NSEC_PER_SEC; As a result, the truncated value is installed into the CPUCLOCK_PROF expiry cache (nextevt), causing the process CPU timer to be programmed to fire prematurely for any RLIMIT_CPU soft limit >= 5 seconds. The actual SIGXCPU/SIGKILL decision in check_process_timers() already casts to u64 and is therefore correct, so limit enforcement is not broken; only the expiry-cache programming is wrong. Apply the same cast here so both paths convert rlim_cur identically. 64-bit kernels are unaffected. | ||||
| CVE-2026-72063 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: tegra: do not call pinctrl for GPIO direction tegra_gpio_direction_input() and tegra_gpio_direction_output() already program the GPIO controller direction registers directly. The additional pinctrl_gpio_direction_input/output() calls do not add a Tegra pinctrl operation, because the Tegra pinmux ops provide GPIO request/free handling but no gpio_set_direction hook. The extra call still enters the pinctrl core and takes pctldev->mutex. Shared GPIO users can call the direction path while holding their per-line spinlock, so this otherwise redundant pinctrl direction call can sleep in an atomic context. This was found by our static analysis tool and then confirmed by manual review of tegra_gpio_probe(), the Tegra GPIO direction callbacks and the Tegra pinctrl ops. The reviewed path has a default non-sleeping struct gpio_chip while the direction callback still enters the pinctrl mutex path. A directed runtime validation kept the same non-sleeping chip registration and drove: gpio_shared_proxy_direction_output() gpiod_direction_output_raw_commit() tegra_gpio_direction_output() pinctrl_gpio_direction_output() Lockdep reported a sleep-in-atomic warning with the shared GPIO spinlock held and pinctrl_get_device_gpio_range() plus tegra_gpio_direction_output() on the stack. Do not mark the whole chip as can_sleep to paper over this: can_sleep describes whether get()/set() may sleep, and Tegra value access is MMIO. Remove the redundant pinctrl direction calls and keep pinctrl involvement in the existing request/free path. | ||||
| CVE-2026-72047 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange a kmalloc'd buffer pointer through a struct kfifo, but pass a literal '4' as the byte count to kfifo_in()/kfifo_out(). This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the low 4 bytes of the 8-byte pointer are written into the FIFO. The reader then reads back 4 bytes into an 8-byte local pointer variable, leaving the upper 4 bytes uninitialized stack data. The first dereference of the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel address and generally results in an oops. Use sizeof(fifo_buffer) so the byte count matches pointer width on every architecture. The driver has no architecture restriction in Kconfig, so any 64-bit build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has been latent since the driver was added in 2017 because it is most commonly deployed on 32-bit MCUs. Found via a custom Coccinelle semantic patch hunting for short-byte kfifo I/O on byte-mode kfifos used to shuttle pointers. | ||||
| CVE-2026-72044 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. | ||||
| CVE-2026-72040 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipmi: fix refcount leak in i_ipmi_request() When a caller provides a `supplied_recv` message to i_ipmi_request(), the function increments the user's `nr_msgs` reference count. If an error occurs later, the out_err cleanup path only frees the recv_msg if the function allocated it itself (i.e., !supplied_recv). In the supplied_recv case the cleanup is skipped, leaving the reference count elevated. The caller ipmi_request_supply_msgs() does not release the supplied_recv on error, so the reference is permanently leaked. Fix this by explicitly reverting the reference count operations when a supplied recv_msg with a valid user pointer is present in the error path: decrement nr_msgs and drop the user's kref. | ||||
| CVE-2026-72031 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Add NOLPM quirk for PNY CS900 1TB SSD The PNY CS900 1TB SSD (Phison PS3111-S11, DRAM-less) drops off the bus after entering Device-Initiated Slumber during idle. With the default med_power_with_dipm policy the link goes down (SStatus 1 SControl 300) and does not recover, forcing the filesystem read-only. Forcing max_performance keeps the link stable across prolonged idle. Add a NOLPM quirk so link power management is disabled for this drive specifically, leaving it intact for other devices on the host. | ||||
| CVE-2026-72028 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable] | ||||
| CVE-2026-72026 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: irqchip/irq-riscv-imsic-early: Fix fwnode leak on state setup failure imsic_early_acpi_init() allocates a firmware node before setting up the IMSIC state. If imsic_setup_state() fails, the function returns without freeing the allocated fwnode. Free the fwnode and clear the global pointer on this error path, matching the cleanup already done when imsic_early_probe() fails. [ tglx: Use a common cleanup path instead of copying code around ] | ||||
| CVE-2026-72017 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: macb: drop in-flight Tx SKBs on close The MACB driver has since forever leaked the outgoing SKBs that have not yet been marked as completed. They live in queue->tx_skb which gets freed without remorse nor checking. macb_free_consistent() gets called in a few codepaths, but only close will trigger the added expressions. In macb_open() and macb_alloc_consistent() failure cases, queues' tx_skb just got allocated and are empty. | ||||
| CVE-2026-72016 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cpu/hotplug: Fix NULL kobject warning in cpuhp_smt_enable() On arm64, when booting with `maxcpus` greater than the number of present CPUs (e.g., QEMU -smp cpus=4,maxcpus=8), some CPUs are marked as 'present' but have not yet been registered via register_cpu(). Consequently, the per-cpu device objects for these CPUs are not yet initialized. In cpuhp_smt_enable(), the code iterates over all present CPUs. Calling _cpu_up() for these unregistered CPUs eventually leads to sysfs_create_group() being called with a NULL kobject (or a kobject without a directory), triggering the following warning in fs/sysfs/group.c: WARNING: fs/sysfs/group.c:137 at internal_create_group+0x41c/0x4bc, CPU#2: sh/181 [...] Call trace: internal_create_group+0x41c/0x4bc (P) sysfs_create_group+0x18/0x24 topology_add_dev+0x1c/0x28 cpuhp_invoke_callback+0x104/0x20c __cpuhp_invoke_callback_range+0x94/0x11c _cpu_up+0x200/0x37c When booting with ACPI, arm64 smp_prepare_cpus() currently sets all enumerated CPUs as "present" regardless of their status in the MADT. This causes issues with SMT hotplug control. For instance, with QEMU's "-smp 4,maxcpus=8" configuration, the MADT GICC entries are populated as follows: 1. The first four CPUs: `Enabled` set but `Online Capable` not set. 2. The remaining four CPUs: `Online Capable` set but `Enabled` not set to support potential hot-plugging. Fix this by: 1. When booting with ACPI, checking the ACPI_MADT_ENABLED flag in the GICC entry before calling set_cpu_present() during SMP initialization. 2. Properly managing the present mask in acpi_map_cpu() and acpi_unmap_cpu() to support actual CPU hotplug events, This aligns with other architectures like x86 and LoongArch. 3. Update the arm64 CPU hotplug documentation to no longer state that all online-capable vCPUs are marked as present by the kernel at boot time. This ensures that only physically available or explicitly enabled CPUs are in the present mask, keeping the SMT control logic consistent with the actual hardware state. | ||||
| CVE-2026-72015 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fs/resctrl: Fix double-add of pseudo-locked region's RMID to free list A pseudo-locked group's RMID is freed when it is created. On unmount rmdir_all_sub() unconditionally frees all RMID of all groups, resulting in a double-free of the pseudo-locked group's RMID. The consequence of this is that the original free results in the pseudo-locked group's RMID being added to the rmid_free_lru linked list and the second free then attempts to add the same RMID entry to the rmid_free_lru again. Do not double-free a pseudo-locked group's RMID. | ||||
| CVE-2026-72013 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: riscv: Prevent NULL pointer dereference in machine_kexec_prepare() A NULL pointer dereference issue is noticed in riscv's machine_kexec_prepare(), where image->segment[i].buf might be NULL and copied unchecked. The NULL buf comes from ima_add_kexec_buffer(), where kbuf is added by kexec_add_buffer(), but kbuf.buffer is NULL, then it is copied without a check in machine_kexec_prepare(): kexec_file_load -> kimage_file_alloc_init() -> kimage_file_prepare_segments() -> ima_add_kexec_buffer() -> kexec_add_buffer() -> machine_kexec_prepare() -> memcpy() Address this by adding a check before the data copy attempt. | ||||