Export limit exceeded: 26771 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26771 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40150 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to avoid migrating empty section It reports a bug from device w/ zufs: F2FS-fs (dm-64): Inconsistent segment (173822) type [1, 0] in SSA and SIT F2FS-fs (dm-64): Stopped filesystem due to reason: 4 Thread A Thread B - f2fs_expand_inode_data - f2fs_allocate_pinning_section - f2fs_gc_range - do_garbage_collect w/ segno #x - writepage - f2fs_allocate_data_block - new_curseg - allocate segno #x The root cause is: fallocate on pinning file may race w/ block allocation as above, result in do_garbage_collect() from fallocate() may migrate segment which is just allocated by a log, the log will update segment type in its in-memory structure, however GC will get segment type from on-disk SSA block, once segment type changes by log, we can detect such inconsistency, then shutdown filesystem. In this case, on-disk SSA shows type of segno #173822 is 1 (SUM_TYPE_NODE), however segno #173822 was just allocated as data type segment, so in-memory SIT shows type of segno #173822 is 0 (SUM_TYPE_DATA). Change as below to fix this issue: - check whether current section is empty before gc - add sanity checks on do_garbage_collect() to avoid any race case, result in migrating segment used by log. - btw, it fixes misc issue in printed logs: "SSA and SIT" -> "SIT and SSA". | ||||
| CVE-2025-40156 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM / devfreq: mtk-cci: Fix potential error pointer dereference in probe() The drv->sram_reg pointer could be set to ERR_PTR(-EPROBE_DEFER) which would lead to a error pointer dereference. Use IS_ERR_OR_NULL() to check that the pointer is valid. | ||||
| CVE-2025-40295 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT When simulating an nvme device on qemu with both logical_block_size and physical_block_size set to 8 KiB, an error trace appears during partition table reading at boot time. The issue is caused by inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left shift of -1 and triggering a UBSAN warning. [ 2.697306] ------------[ cut here ]------------ [ 2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37 [ 2.697311] shift exponent -1 is negative [ 2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary) [ 2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014 [ 2.697320] Call Trace: [ 2.697324] <TASK> [ 2.697325] dump_stack_lvl+0x76/0xa0 [ 2.697340] dump_stack+0x10/0x20 [ 2.697342] __ubsan_handle_shift_out_of_bounds+0x1e3/0x390 [ 2.697351] bh_get_inode_and_lblk_num.cold+0x12/0x94 [ 2.697359] fscrypt_set_bio_crypt_ctx_bh+0x44/0x90 [ 2.697365] submit_bh_wbc+0xb6/0x190 [ 2.697370] block_read_full_folio+0x194/0x270 [ 2.697371] ? __pfx_blkdev_get_block+0x10/0x10 [ 2.697375] ? __pfx_blkdev_read_folio+0x10/0x10 [ 2.697377] blkdev_read_folio+0x18/0x30 [ 2.697379] filemap_read_folio+0x40/0xe0 [ 2.697382] filemap_get_pages+0x5ef/0x7a0 [ 2.697385] ? mmap_region+0x63/0xd0 [ 2.697389] filemap_read+0x11d/0x520 [ 2.697392] blkdev_read_iter+0x7c/0x180 [ 2.697393] vfs_read+0x261/0x390 [ 2.697397] ksys_read+0x71/0xf0 [ 2.697398] __x64_sys_read+0x19/0x30 [ 2.697399] x64_sys_call+0x1e88/0x26a0 [ 2.697405] do_syscall_64+0x80/0x670 [ 2.697410] ? __x64_sys_newfstat+0x15/0x20 [ 2.697414] ? x64_sys_call+0x204a/0x26a0 [ 2.697415] ? do_syscall_64+0xb8/0x670 [ 2.697417] ? irqentry_exit_to_user_mode+0x2e/0x2a0 [ 2.697420] ? irqentry_exit+0x43/0x50 [ 2.697421] ? exc_page_fault+0x90/0x1b0 [ 2.697422] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2.697425] RIP: 0033:0x75054cba4a06 [ 2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08 [ 2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000 [ 2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06 [ 2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b [ 2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000 [ 2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000 [ 2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0 [ 2.697436] </TASK> [ 2.697436] ---[ end trace ]--- This situation can happen for block devices because when CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size is 64 KiB. set_init_blocksize() then sets the block device inode->i_blkbits to 13, which is within this limit. File I/O does not trigger this problem because for filesystems that do not support the FS_LBS feature, sb_set_blocksize() prevents sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not hit the left-shift underflow issue. [EB: use folio_pos() and consolidate the two shifts by i_blkbits] | ||||
| CVE-2025-40222 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tty: serial: sh-sci: fix RSCI FIFO overrun handling The receive error handling code is shared between RSCI and all other SCIF port types, but the RSCI overrun_reg is specified as a memory offset, while for other SCIF types it is an enum value used to index into the sci_port_params->regs array, as mentioned above the sci_serial_in() function. For RSCI, the overrun_reg is CSR (0x48), causing the sci_getreg() call inside the sci_handle_fifo_overrun() function to index outside the bounds of the regs array, which currently has a size of 20, as specified by SCI_NR_REGS. Because of this, we end up accessing memory outside of RSCI's rsci_port_params structure, which, when interpreted as a plat_sci_reg, happens to have a non-zero size, causing the following WARN when sci_serial_in() is called, as the accidental size does not match the supported register sizes. The existence of the overrun_reg needs to be checked because SCIx_SH3_SCIF_REGTYPE has overrun_reg set to SCLSR, but SCLSR is not present in the regs array. Avoid calling sci_getreg() for port types which don't use standard register handling. Use the ops->read_reg() and ops->write_reg() functions to properly read and write registers for RSCI, and change the type of the status variable to accommodate the 32-bit CSR register. sci_getreg() and sci_serial_in() are also called with overrun_reg in the sci_mpxed_interrupt() interrupt handler, but that code path is not used for RSCI, as it does not have a muxed interrupt. ------------[ cut here ]------------ Invalid register access WARNING: CPU: 0 PID: 0 at drivers/tty/serial/sh-sci.c:522 sci_serial_in+0x38/0xac Modules linked in: renesas_usbhs at24 rzt2h_adc industrialio_adc sha256 cfg80211 bluetooth ecdh_generic ecc rfkill fuse drm backlight ipv6 CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.17.0-rc1+ #30 PREEMPT Hardware name: Renesas RZ/T2H EVK Board based on r9a09g077m44 (DT) pstate: 604000c5 (nZCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : sci_serial_in+0x38/0xac lr : sci_serial_in+0x38/0xac sp : ffff800080003e80 x29: ffff800080003e80 x28: ffff800082195b80 x27: 000000000000000d x26: ffff8000821956d0 x25: 0000000000000000 x24: ffff800082195b80 x23: ffff000180e0d800 x22: 0000000000000010 x21: 0000000000000000 x20: 0000000000000010 x19: ffff000180e72000 x18: 000000000000000a x17: ffff8002bcee7000 x16: ffff800080000000 x15: 0720072007200720 x14: 0720072007200720 x13: 0720072007200720 x12: 0720072007200720 x11: 0000000000000058 x10: 0000000000000018 x9 : ffff8000821a6a48 x8 : 0000000000057fa8 x7 : 0000000000000406 x6 : ffff8000821fea48 x5 : ffff00033ef88408 x4 : ffff8002bcee7000 x3 : ffff800082195b80 x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff800082195b80 Call trace: sci_serial_in+0x38/0xac (P) sci_handle_fifo_overrun.isra.0+0x70/0x134 sci_er_interrupt+0x50/0x39c __handle_irq_event_percpu+0x48/0x140 handle_irq_event+0x44/0xb0 handle_fasteoi_irq+0xf4/0x1a0 handle_irq_desc+0x34/0x58 generic_handle_domain_irq+0x1c/0x28 gic_handle_irq+0x4c/0x140 call_on_irq_stack+0x30/0x48 do_interrupt_handler+0x80/0x84 el1_interrupt+0x34/0x68 el1h_64_irq_handler+0x18/0x24 el1h_64_irq+0x6c/0x70 default_idle_call+0x28/0x58 (P) do_idle+0x1f8/0x250 cpu_startup_entry+0x34/0x3c rest_init+0xd8/0xe0 console_on_rootfs+0x0/0x6c __primary_switched+0x88/0x90 ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2025-21086 | 2 Intel, Linux | 2 Ethernet 700 Series Software, Linux Kernel | 2026-04-15 | 7.5 High |
| Improper input validation in the Linux kernel-mode driver for some Intel(R) 700 Series Ethernet before version 2.28.5 may allow an authenticated user to potentially enable escalation of privilege. | ||||
| CVE-2025-68731 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix an integer overflow in aie2_query_ctx_status_array() The unpublished smatch static checker reported a warning. drivers/accel/amdxdna/aie2_pci.c:904 aie2_query_ctx_status_array() warn: potential user controlled sizeof overflow 'args->num_element * args->element_size' '1-u32max(user) * 1-u32max(user)' Even this will not cause a real issue, it is better to put a reasonable limitation for element_size and num_element. Add condition to make sure the input element_size <= 4K and num_element <= 1K. | ||||
| CVE-2025-40179 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ext4: verify orphan file size is not too big In principle orphan file can be arbitrarily large. However orphan replay needs to traverse it all and we also pin all its buffers in memory. Thus filesystems with absurdly large orphan files can lead to big amounts of memory consumed. Limit orphan file size to a sane value and also use kvmalloc() for allocating array of block descriptor structures to avoid large order allocations for sane but large orphan files. | ||||
| CVE-2023-53847 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb-storage: alauda: Fix uninit-value in alauda_check_media() Syzbot got KMSAN to complain about access to an uninitialized value in the alauda subdriver of usb-storage: BUG: KMSAN: uninit-value in alauda_transport+0x462/0x57f0 drivers/usb/storage/alauda.c:1137 CPU: 0 PID: 12279 Comm: usb-storage Not tainted 5.3.0-rc7+ #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x191/0x1f0 lib/dump_stack.c:113 kmsan_report+0x13a/0x2b0 mm/kmsan/kmsan_report.c:108 __msan_warning+0x73/0xe0 mm/kmsan/kmsan_instr.c:250 alauda_check_media+0x344/0x3310 drivers/usb/storage/alauda.c:460 The problem is that alauda_check_media() doesn't verify that its USB transfer succeeded before trying to use the received data. What should happen if the transfer fails isn't entirely clear, but a reasonably conservative approach is to pretend that no media is present. A similar problem exists in a usb_stor_dbg() call in alauda_get_media_status(). In this case, when an error occurs the call is redundant, because usb_stor_ctrl_transfer() already will print a debugging message. Finally, unrelated to the uninitialized memory access, is the fact that alauda_check_media() performs DMA to a buffer on the stack. Fortunately usb-storage provides a general purpose DMA-able buffer for uses like this. We'll use it instead. | ||||
| CVE-2023-53821 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ip6_vti: fix slab-use-after-free in decode_session6 When ipv6_vti device is set to the qdisc of the sfb type, the cb field of the sent skb may be modified during enqueuing. Then, slab-use-after-free may occur when ipv6_vti device sends IPv6 packets. The stack information is as follows: BUG: KASAN: slab-use-after-free in decode_session6+0x103f/0x1890 Read of size 1 at addr ffff88802e08edc2 by task swapper/0/0 CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.4.0-next-20230707-00001-g84e2cad7f979 #410 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 Call Trace: <IRQ> dump_stack_lvl+0xd9/0x150 print_address_description.constprop.0+0x2c/0x3c0 kasan_report+0x11d/0x130 decode_session6+0x103f/0x1890 __xfrm_decode_session+0x54/0xb0 vti6_tnl_xmit+0x3e6/0x1ee0 dev_hard_start_xmit+0x187/0x700 sch_direct_xmit+0x1a3/0xc30 __qdisc_run+0x510/0x17a0 __dev_queue_xmit+0x2215/0x3b10 neigh_connected_output+0x3c2/0x550 ip6_finish_output2+0x55a/0x1550 ip6_finish_output+0x6b9/0x1270 ip6_output+0x1f1/0x540 ndisc_send_skb+0xa63/0x1890 ndisc_send_rs+0x132/0x6f0 addrconf_rs_timer+0x3f1/0x870 call_timer_fn+0x1a0/0x580 expire_timers+0x29b/0x4b0 run_timer_softirq+0x326/0x910 __do_softirq+0x1d4/0x905 irq_exit_rcu+0xb7/0x120 sysvec_apic_timer_interrupt+0x97/0xc0 </IRQ> Allocated by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 __kasan_slab_alloc+0x7f/0x90 kmem_cache_alloc_node+0x1cd/0x410 kmalloc_reserve+0x165/0x270 __alloc_skb+0x129/0x330 netlink_sendmsg+0x9b1/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Freed by task 9176: kasan_save_stack+0x22/0x40 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2b/0x40 ____kasan_slab_free+0x160/0x1c0 slab_free_freelist_hook+0x11b/0x220 kmem_cache_free+0xf0/0x490 skb_free_head+0x17f/0x1b0 skb_release_data+0x59c/0x850 consume_skb+0xd2/0x170 netlink_unicast+0x54f/0x7f0 netlink_sendmsg+0x926/0xe30 sock_sendmsg+0xde/0x190 ____sys_sendmsg+0x739/0x920 ___sys_sendmsg+0x110/0x1b0 __sys_sendmsg+0xf7/0x1c0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd The buggy address belongs to the object at ffff88802e08ed00 which belongs to the cache skbuff_small_head of size 640 The buggy address is located 194 bytes inside of freed 640-byte region [ffff88802e08ed00, ffff88802e08ef80) As commit f855691975bb ("xfrm6: Fix the nexthdr offset in _decode_session6.") showed, xfrm_decode_session was originally intended only for the receive path. IP6CB(skb)->nhoff is not set during transmission. Therefore, set the cb field in the skb to 0 before sending packets. | ||||
| CVE-2025-40195 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mount: handle NULL values in mnt_ns_release() When calling in listmount() mnt_ns_release() may be passed a NULL pointer. Handle that case gracefully. | ||||
| CVE-2023-54205 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: stm32: Fix refcount leak in stm32_pctrl_get_irq_domain of_irq_find_parent() returns a node pointer with refcount incremented, We should use of_node_put() on it when not needed anymore. Add missing of_node_put() to avoid refcount leak. | ||||
| CVE-2023-54176 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: stricter state check in mptcp_worker As reported by Christoph, the mptcp protocol can run the worker when the relevant msk socket is in an unexpected state: connect() // incoming reset + fastclose // the mptcp worker is scheduled mptcp_disconnect() // msk is now CLOSED listen() mptcp_worker() Leading to the following splat: divide error: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21 Comm: kworker/1:0 Not tainted 6.3.0-rc1-gde5e8fd0123c #11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014 Workqueue: events mptcp_worker RIP: 0010:__tcp_select_window+0x22c/0x4b0 net/ipv4/tcp_output.c:3018 RSP: 0018:ffffc900000b3c98 EFLAGS: 00010293 RAX: 000000000000ffd7 RBX: 000000000000ffd7 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8214ce97 RDI: 0000000000000004 RBP: 000000000000ffd7 R08: 0000000000000004 R09: 0000000000010000 R10: 000000000000ffd7 R11: ffff888005afa148 R12: 000000000000ffd7 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000405270 CR3: 000000003011e006 CR4: 0000000000370ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> tcp_select_window net/ipv4/tcp_output.c:262 [inline] __tcp_transmit_skb+0x356/0x1280 net/ipv4/tcp_output.c:1345 tcp_transmit_skb net/ipv4/tcp_output.c:1417 [inline] tcp_send_active_reset+0x13e/0x320 net/ipv4/tcp_output.c:3459 mptcp_check_fastclose net/mptcp/protocol.c:2530 [inline] mptcp_worker+0x6c7/0x800 net/mptcp/protocol.c:2705 process_one_work+0x3bd/0x950 kernel/workqueue.c:2390 worker_thread+0x5b/0x610 kernel/workqueue.c:2537 kthread+0x138/0x170 kernel/kthread.c:376 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> This change addresses the issue explicitly checking for bad states before running the mptcp worker. | ||||
| CVE-2023-54276 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: move init of percpu reply_cache_stats counters back to nfsd_init_net Commit f5f9d4a314da ("nfsd: move reply cache initialization into nfsd startup") moved the initialization of the reply cache into nfsd startup, but didn't account for the stats counters, which can be accessed before nfsd is ever started. The result can be a NULL pointer dereference when someone accesses /proc/fs/nfsd/reply_cache_stats while nfsd is still shut down. This is a regression and a user-triggerable oops in the right situation: - non-x86_64 arch - /proc/fs/nfsd is mounted in the namespace - nfsd is not started in the namespace - unprivileged user calls "cat /proc/fs/nfsd/reply_cache_stats" Although this is easy to trigger on some arches (like aarch64), on x86_64, calling this_cpu_ptr(NULL) evidently returns a pointer to the fixed_percpu_data. That struct looks just enough like a newly initialized percpu var to allow nfsd_reply_cache_stats_show to access it without Oopsing. Move the initialization of the per-net+per-cpu reply-cache counters back into nfsd_init_net, while leaving the rest of the reply cache allocations to be done at nfsd startup time. Kudos to Eirik who did most of the legwork to track this down. | ||||
| CVE-2022-50617 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/powerplay/psm: Fix memory leak in power state init Commit 902bc65de0b3 ("drm/amdgpu/powerplay/psm: return an error in power state init") made the power state init function return early in case of failure to get an entry from the powerplay table, but it missed to clean up the allocated memory for the current power state before returning. | ||||
| CVE-2023-54204 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sunplus: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, 1. the memory allocated in mmc_alloc_host() will be leaked 2. null-ptr-deref will happen when calling mmc_remove_host() in remove function spmmc_drv_remove() because deleting not added device. Fix this by checking the return value of mmc_add_host(). Moreover, I fixed the error handling path of spmmc_drv_probe() to clean up. | ||||
| CVE-2023-54185 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: btrfs: remove BUG_ON()'s in add_new_free_space() At add_new_free_space() we have these BUG_ON()'s that are there to deal with any failure to add free space to the in memory free space cache. Such failures are mostly -ENOMEM that should be very rare. However there's no need to have these BUG_ON()'s, we can just return any error to the caller and all callers and their upper call chain are already dealing with errors. So just make add_new_free_space() return any errors, while removing the BUG_ON()'s, and returning the total amount of added free space to an optional u64 pointer argument. | ||||
| CVE-2025-68288 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: storage: Fix memory leak in USB bulk transport A kernel memory leak was identified by the 'ioctl_sg01' test from Linux Test Project (LTP). The following bytes were mainly observed: 0x53425355. When USB storage devices incorrectly skip the data phase with status data, the code extracts/validates the CSW from the sg buffer, but fails to clear it afterwards. This leaves status protocol data in srb's transfer buffer, such as the US_BULK_CS_SIGN 'USBS' signature observed here. Thus, this can lead to USB protocols leaks to user space through SCSI generic (/dev/sg*) interfaces, such as the one seen here when the LTP test requested 512 KiB. Fix the leak by zeroing the CSW data in srb's transfer buffer immediately after the validation of devices that skip data phase. Note: Differently from CVE-2018-1000204, which fixed a big leak by zero- ing pages at allocation time, this leak occurs after allocation, when USB protocol data is written to already-allocated sg pages. | ||||
| CVE-2023-54172 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/hyperv: Disable IBT when hypercall page lacks ENDBR instruction On hardware that supports Indirect Branch Tracking (IBT), Hyper-V VMs with ConfigVersion 9.3 or later support IBT in the guest. However, current versions of Hyper-V have a bug in that there's not an ENDBR64 instruction at the beginning of the hypercall page. Since hypercalls are made with an indirect call to the hypercall page, all hypercall attempts fail with an exception and Linux panics. A Hyper-V fix is in progress to add ENDBR64. But guard against the Linux panic by clearing X86_FEATURE_IBT if the hypercall page doesn't start with ENDBR. The VM will boot and run without IBT. If future Linux 32-bit kernels were to support IBT, additional hypercall page hackery would be needed to make IBT work for such kernels in a Hyper-V VM. | ||||
| CVE-2023-54177 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: quota: fix warning in dqgrab() There's issue as follows when do fault injection: WARNING: CPU: 1 PID: 14870 at include/linux/quotaops.h:51 dquot_disable+0x13b7/0x18c0 Modules linked in: CPU: 1 PID: 14870 Comm: fsconfig Not tainted 6.3.0-next-20230505-00006-g5107a9c821af-dirty #541 RIP: 0010:dquot_disable+0x13b7/0x18c0 RSP: 0018:ffffc9000acc79e0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff88825e41b980 RDX: 0000000000000000 RSI: ffff88825e41b980 RDI: 0000000000000002 RBP: ffff888179f68000 R08: ffffffff82087ca7 R09: 0000000000000000 R10: 0000000000000001 R11: ffffed102f3ed026 R12: ffff888179f68130 R13: ffff888179f68110 R14: dffffc0000000000 R15: ffff888179f68118 FS: 00007f450a073740(0000) GS:ffff88882fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffe96f2efd8 CR3: 000000025c8ad000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> dquot_load_quota_sb+0xd53/0x1060 dquot_resume+0x172/0x230 ext4_reconfigure+0x1dc6/0x27b0 reconfigure_super+0x515/0xa90 __x64_sys_fsconfig+0xb19/0xd20 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x63/0xcd Above issue may happens as follows: ProcessA ProcessB ProcessC sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_suspend -> suspend all type quota sys_fsconfig vfs_fsconfig_locked reconfigure_super ext4_remount dquot_resume ret = dquot_load_quota_sb add_dquot_ref do_open -> open file O_RDWR vfs_open do_dentry_open get_write_access atomic_inc_unless_negative(&inode->i_writecount) ext4_file_open dquot_file_open dquot_initialize __dquot_initialize dqget atomic_inc(&dquot->dq_count); __dquot_initialize __dquot_initialize dqget if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) ext4_acquire_dquot -> Return error DQ_ACTIVE_B flag isn't set dquot_disable invalidate_dquots if (atomic_read(&dquot->dq_count)) dqgrab WARN_ON_ONCE(!test_bit(DQ_ACTIVE_B, &dquot->dq_flags)) -> Trigger warning In the above scenario, 'dquot->dq_flags' has no DQ_ACTIVE_B is normal when dqgrab(). To solve above issue just replace the dqgrab() use in invalidate_dquots() with atomic_inc(&dquot->dq_count). | ||||
| CVE-2023-54170 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: keys: Fix linking a duplicate key to a keyring's assoc_array When making a DNS query inside the kernel using dns_query(), the request code can in rare cases end up creating a duplicate index key in the assoc_array of the destination keyring. It is eventually found by a BUG_ON() check in the assoc_array implementation and results in a crash. Example report: [2158499.700025] kernel BUG at ../lib/assoc_array.c:652! [2158499.700039] invalid opcode: 0000 [#1] SMP PTI [2158499.700065] CPU: 3 PID: 31985 Comm: kworker/3:1 Kdump: loaded Not tainted 5.3.18-150300.59.90-default #1 SLE15-SP3 [2158499.700096] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 11/12/2020 [2158499.700351] Workqueue: cifsiod cifs_resolve_server [cifs] [2158499.700380] RIP: 0010:assoc_array_insert+0x85f/0xa40 [2158499.700401] Code: ff 74 2b 48 8b 3b 49 8b 45 18 4c 89 e6 48 83 e7 fe e8 95 ec 74 00 3b 45 88 7d db 85 c0 79 d4 0f 0b 0f 0b 0f 0b e8 41 f2 be ff <0f> 0b 0f 0b 81 7d 88 ff ff ff 7f 4c 89 eb 4c 8b ad 58 ff ff ff 0f [2158499.700448] RSP: 0018:ffffc0bd6187faf0 EFLAGS: 00010282 [2158499.700470] RAX: ffff9f1ea7da2fe8 RBX: ffff9f1ea7da2fc1 RCX: 0000000000000005 [2158499.700492] RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 [2158499.700515] RBP: ffffc0bd6187fbb0 R08: ffff9f185faf1100 R09: 0000000000000000 [2158499.700538] R10: ffff9f1ea7da2cc0 R11: 000000005ed8cec8 R12: ffffc0bd6187fc28 [2158499.700561] R13: ffff9f15feb8d000 R14: ffff9f1ea7da2fc0 R15: ffff9f168dc0d740 [2158499.700585] FS: 0000000000000000(0000) GS:ffff9f185fac0000(0000) knlGS:0000000000000000 [2158499.700610] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [2158499.700630] CR2: 00007fdd94fca238 CR3: 0000000809d8c006 CR4: 00000000003706e0 [2158499.700702] Call Trace: [2158499.700741] ? key_alloc+0x447/0x4b0 [2158499.700768] ? __key_link_begin+0x43/0xa0 [2158499.700790] __key_link_begin+0x43/0xa0 [2158499.700814] request_key_and_link+0x2c7/0x730 [2158499.700847] ? dns_resolver_read+0x20/0x20 [dns_resolver] [2158499.700873] ? key_default_cmp+0x20/0x20 [2158499.700898] request_key_tag+0x43/0xa0 [2158499.700926] dns_query+0x114/0x2ca [dns_resolver] [2158499.701127] dns_resolve_server_name_to_ip+0x194/0x310 [cifs] [2158499.701164] ? scnprintf+0x49/0x90 [2158499.701190] ? __switch_to_asm+0x40/0x70 [2158499.701211] ? __switch_to_asm+0x34/0x70 [2158499.701405] reconn_set_ipaddr_from_hostname+0x81/0x2a0 [cifs] [2158499.701603] cifs_resolve_server+0x4b/0xd0 [cifs] [2158499.701632] process_one_work+0x1f8/0x3e0 [2158499.701658] worker_thread+0x2d/0x3f0 [2158499.701682] ? process_one_work+0x3e0/0x3e0 [2158499.701703] kthread+0x10d/0x130 [2158499.701723] ? kthread_park+0xb0/0xb0 [2158499.701746] ret_from_fork+0x1f/0x40 The situation occurs as follows: * Some kernel facility invokes dns_query() to resolve a hostname, for example, "abcdef". The function registers its global DNS resolver cache as current->cred.thread_keyring and passes the query to request_key_net() -> request_key_tag() -> request_key_and_link(). * Function request_key_and_link() creates a keyring_search_context object. Its match_data.cmp method gets set via a call to type->match_preparse() (resolves to dns_resolver_match_preparse()) to dns_resolver_cmp(). * Function request_key_and_link() continues and invokes search_process_keyrings_rcu() which returns that a given key was not found. The control is then passed to request_key_and_link() -> construct_alloc_key(). * Concurrently to that, a second task similarly makes a DNS query for "abcdef." and its result gets inserted into the DNS resolver cache. * Back on the first task, function construct_alloc_key() first runs __key_link_begin() to determine an assoc_array_edit operation to insert a new key. Index keys in the array are compared exactly as-is, using keyring_compare_object(). The operation ---truncated--- | ||||