Export limit exceeded: 381391 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381391 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381391 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 381391 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381391 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-12634 | 1 Zephyrproject | 1 Zephyr | 2026-08-20 | 5.3 Medium |
| The NVS backend of the Zephyr settings subsystem (subsys/settings/src/settings_nvs.c) reads stored setting-name entries into fixed 74-byte stack buffers and NUL-terminates them with buf[rc] = '\0', where rc is the return value of nvs_read(). Per its contract, nvs_read() returns the full stored entry length (wlk_ate.len), which can exceed the supplied buffer length — only MIN(len, stored_len) bytes are actually copied, but the return value may be much larger, bounded only by the NVS sector size. Three sites (settings_nvs_cache_match(), settings_nvs_load(), and settings_nvs_save()) used this value directly as the NUL index without clamping, so an oversized stored name entry causes a single \0 byte to be written past the end of the stack buffer at an attacker-influenced offset (CWE-787). The oversized entry cannot arise through the normal settings API, where names are bounded by SETTINGS_MAX_NAME_LEN. It requires an actor able to write the flash that backs the settings partition — a co-resident or untrusted component sharing the flash device, a malicious settings image/restore, or offline/physical flash access (a shared-flash threat model). The malformed entry is parsed when settings_load() runs at boot or subsystem init, or during settings_save(). The out-of-bounds write is a single NUL byte at an offset equal to the crafted entry length (up to the NVS sector size), so the practical impact is a crash or denial of service and limited stack corruption rather than reliable code execution. There is no confidentiality impact, and the path is not reachable from the network through the ordinary settings interface. The fix skips any entry whose nvs_read() length is greater than or equal to the buffer size before performing the NUL store. | ||||
| CVE-2026-68553 | 1 Coturn | 1 Coturn | 2026-08-20 | 7.1 High |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.13.0, an authenticated TURN user can place printf-style format specifiers in the STUN USERNAME or REALM attribute, which passes is_secure_string() validation and is embedded into Redis keys at nine call sites in src/apps/relay/ns_ioalib_engine_impl.c. send_message_to_redis() in src/apps/relay/hiredis_libevent2.c then passes the attacker-controlled key as the format argument to redisAsyncCommand() while supplying only one variadic value, causing hiredis redisvFormatCommand() to read past the va_list. Exploitation can crash the coturn process and terminate active TURN sessions or disclose stack memory into Redis. This issue is fixed in version 4.13.0. | ||||
| CVE-2026-76347 | 1 Splunk | 2 Splunk Enterprise, Splunk Secure Gateway | 2026-08-20 | 5.4 Medium |
| In Splunk Enterprise versions below 10.4.2, 10.2.6, 10.0.9, and 9.4.14, and Splunk Secure Gateway versions below 3.10.9, 3.9.23, and 3.8.70, a user who does not hold the "admin" or "power" Splunk roles could use Server-Side Request Forgery (SSRF) in report notifications to send system-authenticated requests to internal Splunk services, which could allow for changes to Search Head Cluster state and a denial of service. The vulnerability is possible because Splunk Secure Gateway does not validate report notification path values before it sends internal requests. | ||||
| CVE-2026-76393 | 1 Splunk | 1 Splunk Ai Toolkit | 2026-08-20 | 5.9 Medium |
| In Splunk AI Toolkit versions below 6.0.0, a user who can upload models could overwrite a model being uploaded by another user by sending a concurrent upload request for the same model name, causing the resulting model lookup entry to reference attacker-controlled content. The race condition is possible because Splunk AI Toolkit does not verify that the uploaded content belongs to the request that creates the model lookup entry. For more information see Troubleshoot the Splunk Machine Learning Toolkit (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/machine-learning-toolkit-user-guide/5.5.0/troubleshooting-mltk/troubleshoot-the-splunk-machine-learning-toolkit) in the Splunk documentation. | ||||
| CVE-2026-76396 | 1 Splunk | 1 Splunk Ai Toolkit | 2026-08-20 | 7.5 High |
| In Splunk AI Toolkit versions below 6.0.0, a user that holds a role with the schedule_search capability could cause a scheduled search to load and deserialize a model file through the apply search command. The improper access control is possible because Splunk AI Toolkit does not mark the apply search command as risky. For more information see Troubleshoot the AI Toolkit (https://help.splunk.com/en/splunk-enterprise/apply-machine-learning/use-ai-toolkit/5.7.3/troubleshooting-the-ai-toolkit/troubleshoot-the-ai-toolkit) in the Splunk documentation. | ||||
| CVE-2026-76591 | 1 Trendnet | 2 Tew-755ap, Tew-755ap Firmware | 2026-08-20 | 7.4 High |
| A security flaw has been discovered in TRENDnet TEW-755AP up to 20260702. This affects the function log_email_server of the file /cgi-bin/email.cgi of the component ssi. Performing a manipulation results in command injection. The attack is possible to be carried out remotely. The exploit has been released to the public and may be used for attacks. | ||||
| CVE-2026-76879 | 1 Wireshark | 1 Wireshark | 2026-08-20 | 7.5 High |
| C12.22 protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-76922 | 1 Wireshark | 1 Wireshark | 2026-08-20 | 5.5 Medium |
| Bluetooth BR/EDR FHS protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service | ||||
| CVE-2026-76795 | 1 Aeternalabshq | 1 Pullmd | 2026-08-20 | 7.3 High |
| A vulnerability has been found in AeternaLabsHQ PullMD 3.2.0. This impacts an unknown function of the file /api of the component REST API Endpoint. The manipulation of the argument url leads to server-side request forgery. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 3.3.0 will fix this issue. The identifier of the patch is 96448894cc93ccecb0bdcbf263a9d25390a8455e. Upgrading the affected component is advised. | ||||
| CVE-2026-68552 | 1 Coturn | 1 Coturn | 2026-08-20 | 5.3 Medium |
| Coturn is a free open source implementation of TURN and STUN Server. Prior to 4.15.0, an unauthenticated remote client can send a STUN message over TCP or TLS with a body-length field from 65520 through 65532, causing the uint16_t len variable in stun_get_message_len_str() in src/client/ns_turn_msg.c to wrap when STUN_HEADER_LENGTH is added. The framing layer then consumes only 4 through 16 bytes, treats the remaining bytes as another message, desynchronizes the stream parser, and drops the attacking client's connection. Other clients and the server process are not affected. This issue is fixed in version 4.15.0. | ||||
| CVE-2026-68555 | 1 Coturn | 1 Coturn | 2026-08-20 | 6.5 Medium |
| Coturn is a free open source implementation of TURN and STUN Server. In 4.15.0, an authenticated TURN user can repeatedly resume one allocation from fresh UDP 5-tuples without completing a handoff when the server enables --mobility. mobile_begin_transition() in src/server/ns_turn_server.c disarms each new session's allocation timeout and overwrites the allocation's single mobile_pending_resume link, leaving earlier pending sessions unreachable by the cleanup path, while copy_auth_parameters() ignores inc_quota() failure. The attacker can therefore retain unbounded server-side sessions and exhaust process memory even when --user-quota=1 is configured. This issue is fixed in version 4.16.0. | ||||
| CVE-2026-54494 | 1 Koel | 1 Koel | 2026-08-20 | N/A |
| Koel is a free, open-source music streaming solution. Prior to 9.7.1, App\Helpers\Network::isPublicHost() uses filter_var() with FILTER_FLAG_NO_PRIV_RANGE and FILTER_FLAG_NO_RES_RANGE, which treats NAT64 64:ff9b::/96 and 6to4 2002::/16 wrappers of private, loopback, or link-local IPv4 addresses as public. An authenticated user can place such an address in a podcast RSS <enclosure url> and reach app/Values/Podcast/EpisodePlayable.php through EpisodePlayable::createForEpisode(), where isSafeUrl() accepts the target and Http::sink($file)->get($url) fetches it. On a host with NAT64 or 6to4 routing, Koel can request internal services or cloud metadata and return the response body to the user. This issue is fixed in version 9.7.1 | ||||
| CVE-2026-54493 | 1 Koel | 1 Koel | 2026-08-20 | 7.7 High |
| Koel is a free, open-source music streaming solution. Prior to 9.7.0, the Subsonic-compatible createInternetRadioStation.view and updateInternetRadioStation.view routes accept an authenticated user's streamUrl without the SafeUrl and HasAudioContentType checks used by the regular radio API. app/Http/Requests/Subsonic/CreateInternetRadioStationRequest.php and app/Http/Requests/Subsonic/UpdateInternetRadioStationRequest.php pass the stored URL through app/Services/RadioService.php to app/Services/Radio/RadioStreamProxy.php, where RadioStreamProxy::openStream() calls fopen($url, 'r', false, $context). Streaming /radio/stream/{id} returns the upstream response body, allowing access to loopback, RFC1918, Docker bridge, metadata, or other internal HTTP services reachable from the Koel server. This issue is fixed in version 9.7.0. | ||||
| CVE-2026-61556 | 1 Harttle | 1 Liquidjs | 2026-08-20 | N/A |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. From 10.26.0 until 10.27.1, the strip_html filter in src/filters/html.ts can enter an infinite loop when an input string contains <, includes at least one preceding character, and has no later >. In strip_html, the search for the next opener advances lt while the loop index remains unchanged when the closer search returns -1, and the equality-only stall guard does not exit because the loop index is less than lt. Reprocessing the same state indefinitely blocks template rendering and can cause denial of service with an input as short as a<. This issue is fixed in version 10.27.1. | ||||
| CVE-2026-69222 | 1 Harttle | 1 Liquidjs | 2026-08-20 | 7.5 High |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to 10.27.2, the join filter in src/filters/array.ts computes complexity from array.length and separator length instead of the total string length produced by array.join(sep). The concat filter can cheaply double arrays of references, after which join materializes the referenced content while charging only for element count, allowing a template to exceed a configured memoryLimit by a large factor. The sibling array_to_sentence_string filter in src/filters/string.ts has the same accounting defect, and a crafted template can allocate toward V8's string or process memory limit and crash the process. This issue is fixed in version 10.27.2. | ||||
| CVE-2026-76785 | 1 Amirsanni | 1 Mini-inventory-and-sales-management-system | 2026-08-20 | 6.3 Medium |
| A security flaw has been discovered in amirsanni Mini-Inventory-and-Sales-Management-System 0.1. Affected is the function Transaction::getAll of the file application/models/Transaction.php. Performing a manipulation of the argument orderBy/orderFormat results in sql injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-76392 | 1 Splunk | 1 Ai Toolkit | 2026-08-20 | 5.4 Medium |
| In Splunk AI Toolkit versions below 6.0.0, a user who does not hold the "admin" or "power" Splunk roles could obtain predictable or default credentials for connected container services. The use of hard-coded credentials is possible because Splunk AI Toolkit generates or stores credentials for connected container services using predictable or hard-coded default values. For more information see Connections tab in the AI Toolkit (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/use-ai-toolkit/5.7.2/ai-toolkit-commands-macros-and-visualizations/connections-tab-in-the-ai-toolkit) in the Splunk documentation. | ||||
| CVE-2026-76395 | 1 Splunk | 1 Splunk Ai Toolkit | 2026-08-20 | 8.8 High |
| In Splunk AI Toolkit versions below 6.0.0, a user who holds the "power" Splunk role could execute arbitrary code on the Splunk server by loading a model file containing crafted sparse matrix data. The deserialization of untrusted data is possible because a model codec in Splunk AI Toolkit deserializes sparse matrix data without guarding against embedded pickle content. For more information see Troubleshoot the Splunk Machine Learning Toolkit (https://help.splunk.com/en/splunk-cloud-platform/apply-machine-learning/machine-learning-toolkit-user-guide/5.5.0/troubleshooting-mltk/troubleshoot-the-splunk-machine-learning-toolkit) in the Splunk documentation. | ||||
| CVE-2026-76590 | 1 Trendnet | 2 Tew-755ap, Tew-755ap Firmware | 2026-08-20 | 9.9 Critical |
| A vulnerability was identified in TRENDnet TEW-755AP up to 20260702. Affected by this issue is some unknown functionality of the file /cgi-bin/wan.cgi of the component ssi. Such manipulation of the argument cameo.wan.wan_pppoe_password_00 leads to stack-based buffer overflow. The attack can be executed remotely. The exploit is publicly available and might be used. | ||||
| CVE-2026-76832 | 1 Agno-agi | 1 Agno | 2026-08-20 | 8.8 High |
| Agno's PythonTools in libs/agno/agno/tools/python.py contains a path traversal vulnerability that allows attackers to read, write, or execute arbitrary files by supplying parent-directory traversal sequences in the file_name argument passed to read_file, save_to_file, or run_python_file tool actions. Attackers can inject traversal sequences such as '../../../../../../etc/passwd' through direct tool invocation or via prompt injection embedded in agent-processed content to escape the intended base_dir boundary and achieve arbitrary file read, arbitrary file write, or arbitrary Python code execution within the process user's authority. | ||||