Export limit exceeded: 430475 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 26771 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (26771 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2025-40315 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_fs: Fix epfile null pointer access after ep enable. A race condition occurs when ffs_func_eps_enable() runs concurrently with ffs_data_reset(). The ffs_data_clear() called in ffs_data_reset() sets ffs->epfiles to NULL before resetting ffs->eps_count to 0, leading to a NULL pointer dereference when accessing epfile->ep in ffs_func_eps_enable() after successful usb_ep_enable(). The ffs->epfiles pointer is set to NULL in both ffs_data_clear() and ffs_data_close() functions, and its modification is protected by the spinlock ffs->eps_lock. And the whole ffs_func_eps_enable() function is also protected by ffs->eps_lock. Thus, add NULL pointer handling for ffs->epfiles in the ffs_func_eps_enable() function to fix issues | ||||
| CVE-2025-40050 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer In check_alu_op(), the verifier currently calls check_reg_arg() and adjust_scalar_min_max_vals() unconditionally for BPF_NEG operations. However, if the destination register holds a pointer, these scalar adjustments are unnecessary and potentially incorrect. This patch adds a check to skip the adjustment logic when the destination register contains a pointer. | ||||
| CVE-2025-68228 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/plane: Fix create_in_format_blob() return value create_in_format_blob() is either supposed to return a valid pointer or an error, but never NULL. The caller will dereference the blob when it is not an error, and thus will oops if NULL returned. Return proper error values in the failure cases. | ||||
| CVE-2023-54049 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rpmsg: glink: Add check for kstrdup Add check for the return value of kstrdup() and return the error if it fails in order to avoid NULL pointer dereference. | ||||
| CVE-2025-40015 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-csi: Fix dereference before NULL check In 'stm32_csi_start', 'csidev->s_subdev' is dereferenced directly while assigning a value to the 'src_pad'. However the same value is being checked against NULL at a later point of time indicating that there are chances that the value can be NULL. Move the dereference after the NULL check. | ||||
| CVE-2025-68233 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/tegra: Add call to put_pid() Add a call to put_pid() corresponding to get_task_pid(). host1x_memory_context_alloc() does not take ownership of the PID so we need to free it here to avoid leaking. [mperttunen@nvidia.com: reword commit message] | ||||
| CVE-2025-68316 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: ufs: core: Fix invalid probe error return value After DME Link Startup, the error return value is set to the MIPI UniPro GenericErrorCode which can be 0 (SUCCESS) or 1 (FAILURE). Upon failure during driver probe, the error code 1 is propagated back to the driver probe function which must return a negative value to indicate an error, but 1 is not negative, so the probe is considered to be successful even though it failed. Subsequently, removing the driver results in an oops because it is not in a valid state. This happens because none of the callers of ufshcd_init() expect a non-negative error code. Fix the return value and documentation to match actual usage. | ||||
| CVE-2025-68282 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: udc: fix use-after-free in usb_gadget_state_work A race condition during gadget teardown can lead to a use-after-free in usb_gadget_state_work(), as reported by KASAN: BUG: KASAN: invalid-access in sysfs_notify+0x2c/0xd0 Workqueue: events usb_gadget_state_work The fundamental race occurs because a concurrent event (e.g., an interrupt) can call usb_gadget_set_state() and schedule gadget->work at any time during the cleanup process in usb_del_gadget(). Commit 399a45e5237c ("usb: gadget: core: flush gadget workqueue after device removal") attempted to fix this by moving flush_work() to after device_del(). However, this does not fully solve the race, as a new work item can still be scheduled *after* flush_work() completes but before the gadget's memory is freed, leading to the same use-after-free. This patch fixes the race condition robustly by introducing a 'teardown' flag and a 'state_lock' spinlock to the usb_gadget struct. The flag is set during cleanup in usb_del_gadget() *before* calling flush_work() to prevent any new work from being scheduled once cleanup has commenced. The scheduling site, usb_gadget_set_state(), now checks this flag under the lock before queueing the work, thus safely closing the race window. | ||||
| CVE-2022-50560 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/meson: explicitly remove aggregate driver at module unload time Because component_master_del wasn't being called when unloading the meson_drm module, the aggregate device would linger forever in the global aggregate_devices list. That means when unloading and reloading the meson_dw_hdmi module, component_add would call into try_to_bring_up_aggregate_device and find the unbound meson_drm aggregate device. This would in turn dereference some of the aggregate_device's struct entries which point to memory automatically freed by the devres API when unbinding the aggregate device from meson_drv_unbind, and trigger an use-after-free bug: [ +0.000014] ============================================================= [ +0.000007] BUG: KASAN: use-after-free in find_components+0x468/0x500 [ +0.000017] Read of size 8 at addr ffff000006731688 by task modprobe/2536 [ +0.000018] CPU: 4 PID: 2536 Comm: modprobe Tainted: G C O 5.19.0-rc6-lrmbkasan+ #1 [ +0.000010] Hardware name: Hardkernel ODROID-N2Plus (DT) [ +0.000008] Call trace: [ +0.000005] dump_backtrace+0x1ec/0x280 [ +0.000011] show_stack+0x24/0x80 [ +0.000007] dump_stack_lvl+0x98/0xd4 [ +0.000010] print_address_description.constprop.0+0x80/0x520 [ +0.000011] print_report+0x128/0x260 [ +0.000007] kasan_report+0xb8/0xfc [ +0.000007] __asan_report_load8_noabort+0x3c/0x50 [ +0.000009] find_components+0x468/0x500 [ +0.000008] try_to_bring_up_aggregate_device+0x64/0x390 [ +0.000009] __component_add+0x1dc/0x49c [ +0.000009] component_add+0x20/0x30 [ +0.000008] meson_dw_hdmi_probe+0x28/0x34 [meson_dw_hdmi] [ +0.000013] platform_probe+0xd0/0x220 [ +0.000008] really_probe+0x3ac/0xa80 [ +0.000008] __driver_probe_device+0x1f8/0x400 [ +0.000008] driver_probe_device+0x68/0x1b0 [ +0.000008] __driver_attach+0x20c/0x480 [ +0.000009] bus_for_each_dev+0x114/0x1b0 [ +0.000007] driver_attach+0x48/0x64 [ +0.000009] bus_add_driver+0x390/0x564 [ +0.000007] driver_register+0x1a8/0x3e4 [ +0.000009] __platform_driver_register+0x6c/0x94 [ +0.000007] meson_dw_hdmi_platform_driver_init+0x30/0x1000 [meson_dw_hdmi] [ +0.000014] do_one_initcall+0xc4/0x2b0 [ +0.000008] do_init_module+0x154/0x570 [ +0.000010] load_module+0x1a78/0x1ea4 [ +0.000008] __do_sys_init_module+0x184/0x1cc [ +0.000008] __arm64_sys_init_module+0x78/0xb0 [ +0.000008] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0xcc/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000008] el0_svc+0x68/0x1a0 [ +0.000009] el0t_64_sync_handler+0x11c/0x150 [ +0.000009] el0t_64_sync+0x18c/0x190 [ +0.000014] Allocated by task 902: [ +0.000007] kasan_save_stack+0x2c/0x5c [ +0.000009] __kasan_kmalloc+0x90/0xd0 [ +0.000007] __kmalloc_node+0x240/0x580 [ +0.000010] memcg_alloc_slab_cgroups+0xa4/0x1ac [ +0.000010] memcg_slab_post_alloc_hook+0xbc/0x4c0 [ +0.000008] kmem_cache_alloc_node+0x1d0/0x490 [ +0.000009] __alloc_skb+0x1d4/0x310 [ +0.000010] alloc_skb_with_frags+0x8c/0x620 [ +0.000008] sock_alloc_send_pskb+0x5ac/0x6d0 [ +0.000010] unix_dgram_sendmsg+0x2e0/0x12f0 [ +0.000010] sock_sendmsg+0xcc/0x110 [ +0.000007] sock_write_iter+0x1d0/0x304 [ +0.000008] new_sync_write+0x364/0x460 [ +0.000007] vfs_write+0x420/0x5ac [ +0.000008] ksys_write+0x19c/0x1f0 [ +0.000008] __arm64_sys_write+0x78/0xb0 [ +0.000007] invoke_syscall+0x74/0x260 [ +0.000008] el0_svc_common.constprop.0+0x1a8/0x260 [ +0.000009] do_el0_svc+0x50/0x70 [ +0.000007] el0_svc+0x68/0x1a0 [ +0.000008] el0t_64_sync_handler+0x11c/0x150 [ +0.000008] el0t_64_sync+0x18c/0x190 [ +0.000013] Freed by task 2509: [ +0.000008] kasan_save_stack+0x2c/0x5c [ +0.000007] kasan_set_track+0x2c/0x40 [ +0.000008] kasan_set_free_info+0x28/0x50 [ +0.000008] ____kasan_slab_free+0x128/0x1d4 [ +0.000008] __kasan_slab_free+0x18/0x24 [ +0.000007] slab_free_freelist_hook+0x108/0x230 [ +0.000010] ---truncated--- | ||||
| CVE-2025-71196 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: phy: stm32-usphyc: Fix off by one in probe() The "index" variable is used as an index into the usbphyc->phys[] array which has usbphyc->nphys elements. So if it is equal to usbphyc->nphys then it is one element out of bounds. The "index" comes from the device tree so it's data that we trust and it's unlikely to be wrong, however it's obviously still worth fixing the bug. Change the > to >=. | ||||
| CVE-2025-40059 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: coresight: Fix incorrect handling for return value of devm_kzalloc The return value of devm_kzalloc could be an null pointer, use "!desc.pdata" to fix incorrect handling return value of devm_kzalloc. | ||||
| CVE-2023-54251 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: taprio: Limit TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME to INT_MAX. syzkaller found zero division error [0] in div_s64_rem() called from get_cycle_time_elapsed(), where sched->cycle_time is the divisor. We have tests in parse_taprio_schedule() so that cycle_time will never be 0, and actually cycle_time is not 0 in get_cycle_time_elapsed(). The problem is that the types of divisor are different; cycle_time is s64, but the argument of div_s64_rem() is s32. syzkaller fed this input and 0x100000000 is cast to s32 to be 0. @TCA_TAPRIO_ATTR_SCHED_CYCLE_TIME={0xc, 0x8, 0x100000000} We use s64 for cycle_time to cast it to ktime_t, so let's keep it and set max for cycle_time. While at it, we prevent overflow in setup_txtime() and add another test in parse_taprio_schedule() to check if cycle_time overflows. Also, we add a new tdc test case for this issue. [0]: divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI CPU: 1 PID: 103 Comm: kworker/1:3 Not tainted 6.5.0-rc1-00330-g60cc1f7d0605 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:div_s64_rem include/linux/math64.h:42 [inline] RIP: 0010:get_cycle_time_elapsed net/sched/sch_taprio.c:223 [inline] RIP: 0010:find_entry_to_transmit+0x252/0x7e0 net/sched/sch_taprio.c:344 Code: 3c 02 00 0f 85 5e 05 00 00 48 8b 4c 24 08 4d 8b bd 40 01 00 00 48 8b 7c 24 48 48 89 c8 4c 29 f8 48 63 f7 48 99 48 89 74 24 70 <48> f7 fe 48 29 d1 48 8d 04 0f 49 89 cc 48 89 44 24 20 49 8d 85 10 RSP: 0018:ffffc90000acf260 EFLAGS: 00010206 RAX: 177450e0347560cf RBX: 0000000000000000 RCX: 177450e0347560cf RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000100000000 RBP: 0000000000000056 R08: 0000000000000000 R09: ffffed10020a0934 R10: ffff8880105049a7 R11: ffff88806cf3a520 R12: ffff888010504800 R13: ffff88800c00d800 R14: ffff8880105049a0 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f0edf84f0e8 CR3: 000000000d73c002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> get_packet_txtime net/sched/sch_taprio.c:508 [inline] taprio_enqueue_one+0x900/0xff0 net/sched/sch_taprio.c:577 taprio_enqueue+0x378/0xae0 net/sched/sch_taprio.c:658 dev_qdisc_enqueue+0x46/0x170 net/core/dev.c:3732 __dev_xmit_skb net/core/dev.c:3821 [inline] __dev_queue_xmit+0x1b2f/0x3000 net/core/dev.c:4169 dev_queue_xmit include/linux/netdevice.h:3088 [inline] neigh_resolve_output net/core/neighbour.c:1552 [inline] neigh_resolve_output+0x4a7/0x780 net/core/neighbour.c:1532 neigh_output include/net/neighbour.h:544 [inline] ip6_finish_output2+0x924/0x17d0 net/ipv6/ip6_output.c:135 __ip6_finish_output+0x620/0xaa0 net/ipv6/ip6_output.c:196 ip6_finish_output net/ipv6/ip6_output.c:207 [inline] NF_HOOK_COND include/linux/netfilter.h:292 [inline] ip6_output+0x206/0x410 net/ipv6/ip6_output.c:228 dst_output include/net/dst.h:458 [inline] NF_HOOK.constprop.0+0xea/0x260 include/linux/netfilter.h:303 ndisc_send_skb+0x872/0xe80 net/ipv6/ndisc.c:508 ndisc_send_ns+0xb5/0x130 net/ipv6/ndisc.c:666 addrconf_dad_work+0xc14/0x13f0 net/ipv6/addrconf.c:4175 process_one_work+0x92c/0x13a0 kernel/workqueue.c:2597 worker_thread+0x60f/0x1240 kernel/workqueue.c:2748 kthread+0x2fe/0x3f0 kernel/kthread.c:389 ret_from_fork+0x2c/0x50 arch/x86/entry/entry_64.S:308 </TASK> Modules linked in: | ||||
| CVE-2023-54242 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: block, bfq: Fix division by zero error on zero wsum When the weighted sum is zero the calculation of limit causes a division by zero error. Fix this by continuing to the next level. This was discovered by running as root: stress-ng --ioprio 0 Fixes divison by error oops: [ 521.450556] divide error: 0000 [#1] SMP NOPTI [ 521.450766] CPU: 2 PID: 2684464 Comm: stress-ng-iopri Not tainted 6.2.1-1280.native #1 [ 521.451117] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.1-0-g3208b098f51a-prebuilt.qemu.org 04/01/2014 [ 521.451627] RIP: 0010:bfqq_request_over_limit+0x207/0x400 [ 521.451875] Code: 01 48 8d 0c c8 74 0b 48 8b 82 98 00 00 00 48 8d 0c c8 8b 85 34 ff ff ff 48 89 ca 41 0f af 41 50 48 d1 ea 48 98 48 01 d0 31 d2 <48> f7 f1 41 39 41 48 89 85 34 ff ff ff 0f 8c 7b 01 00 00 49 8b 44 [ 521.452699] RSP: 0018:ffffb1af84eb3948 EFLAGS: 00010046 [ 521.452938] RAX: 000000000000003c RBX: 0000000000000000 RCX: 0000000000000000 [ 521.453262] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffb1af84eb3978 [ 521.453584] RBP: ffffb1af84eb3a30 R08: 0000000000000001 R09: ffff8f88ab8a4ba0 [ 521.453905] R10: 0000000000000000 R11: 0000000000000001 R12: ffff8f88ab8a4b18 [ 521.454224] R13: ffff8f8699093000 R14: 0000000000000001 R15: ffffb1af84eb3970 [ 521.454549] FS: 00005640b6b0b580(0000) GS:ffff8f88b3880000(0000) knlGS:0000000000000000 [ 521.454912] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 521.455170] CR2: 00007ffcbcae4e38 CR3: 00000002e46de001 CR4: 0000000000770ee0 [ 521.455491] PKRU: 55555554 [ 521.455619] Call Trace: [ 521.455736] <TASK> [ 521.455837] ? bfq_request_merge+0x3a/0xc0 [ 521.456027] ? elv_merge+0x115/0x140 [ 521.456191] bfq_limit_depth+0xc8/0x240 [ 521.456366] __blk_mq_alloc_requests+0x21a/0x2c0 [ 521.456577] blk_mq_submit_bio+0x23c/0x6c0 [ 521.456766] __submit_bio+0xb8/0x140 [ 521.457236] submit_bio_noacct_nocheck+0x212/0x300 [ 521.457748] submit_bio_noacct+0x1a6/0x580 [ 521.458220] submit_bio+0x43/0x80 [ 521.458660] ext4_io_submit+0x23/0x80 [ 521.459116] ext4_do_writepages+0x40a/0xd00 [ 521.459596] ext4_writepages+0x65/0x100 [ 521.460050] do_writepages+0xb7/0x1c0 [ 521.460492] __filemap_fdatawrite_range+0xa6/0x100 [ 521.460979] file_write_and_wait_range+0xbf/0x140 [ 521.461452] ext4_sync_file+0x105/0x340 [ 521.461882] __x64_sys_fsync+0x67/0x100 [ 521.462305] ? syscall_exit_to_user_mode+0x2c/0x1c0 [ 521.462768] do_syscall_64+0x3b/0xc0 [ 521.463165] entry_SYSCALL_64_after_hwframe+0x5a/0xc4 [ 521.463621] RIP: 0033:0x5640b6c56590 [ 521.464006] Code: 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 80 3d 71 70 0e 00 00 74 17 b8 4a 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 48 c3 0f 1f 80 00 00 00 00 48 83 ec 18 89 7c | ||||
| CVE-2023-54204 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: sunplus: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, 1. the memory allocated in mmc_alloc_host() will be leaked 2. null-ptr-deref will happen when calling mmc_remove_host() in remove function spmmc_drv_remove() because deleting not added device. Fix this by checking the return value of mmc_add_host(). Moreover, I fixed the error handling path of spmmc_drv_probe() to clean up. | ||||
| CVE-2023-54167 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: m68k: mm: Move initrd phys_to_virt handling after paging_init() When booting with an initial ramdisk on platforms where physical memory does not start at address zero (e.g. on Amiga): initrd: 0ef0602c - 0f800000 Zone ranges: DMA [mem 0x0000000008000000-0x000000f7ffffffff] Normal empty Movable zone start for each node Early memory node ranges node 0: [mem 0x0000000008000000-0x000000000f7fffff] Initmem setup node 0 [mem 0x0000000008000000-0x000000000f7fffff] Unable to handle kernel access at virtual address (ptrval) Oops: 00000000 Modules linked in: PC: [<00201d3c>] memcmp+0x28/0x56 As phys_to_virt() relies on m68k_memoffset and module_fixup(), it must not be called before paging_init(). Hence postpone the phys_to_virt handling for the initial ramdisk until after calling paging_init(). While at it, reduce #ifdef clutter by using IS_ENABLED() instead. | ||||
| CVE-2022-50886 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mmc: toshsd: fix return value check of mmc_add_host() mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, free_irq() also needs be called. | ||||
| CVE-2022-50828 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: clk: zynqmp: Fix stack-out-of-bounds in strncpy` "BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68" Linux-ATF interface is using 16 bytes of SMC payload. In case clock name is longer than 15 bytes, string terminated NULL character will not be received by Linux. Add explicit NULL character at last byte to fix issues when clock name is longer. This fixes below bug reported by KASAN: ================================================================== BUG: KASAN: stack-out-of-bounds in strncpy+0x30/0x68 Read of size 1 at addr ffff0008c89a7410 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.0-00396-g81ef9e7-dirty #3 Hardware name: Xilinx Versal vck190 Eval board revA (QSPI) (DT) Call trace: dump_backtrace+0x0/0x1e8 show_stack+0x14/0x20 dump_stack+0xd4/0x108 print_address_description.isra.0+0xbc/0x37c __kasan_report+0x144/0x198 kasan_report+0xc/0x18 __asan_load1+0x5c/0x68 strncpy+0x30/0x68 zynqmp_clock_probe+0x238/0x7b8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 __device_attach_driver+0xc4/0xe8 bus_for_each_drv+0xec/0x150 __device_attach+0x160/0x1d8 device_initial_probe+0x10/0x18 bus_probe_device+0xe0/0xf0 device_add+0x528/0x950 of_device_add+0x5c/0x80 of_platform_device_create_pdata+0x120/0x168 of_platform_bus_create+0x244/0x4e0 of_platform_populate+0x50/0xe8 zynqmp_firmware_probe+0x370/0x3a8 platform_drv_probe+0x6c/0xc8 really_probe+0x14c/0x418 driver_probe_device+0x74/0x130 device_driver_attach+0x94/0xa0 __driver_attach+0x70/0x108 bus_for_each_dev+0xe4/0x158 driver_attach+0x30/0x40 bus_add_driver+0x21c/0x2b8 driver_register+0xbc/0x1d0 __platform_driver_register+0x7c/0x88 zynqmp_firmware_driver_init+0x1c/0x24 do_one_initcall+0xa4/0x234 kernel_init_freeable+0x1b0/0x24c kernel_init+0x10/0x110 ret_from_fork+0x10/0x18 The buggy address belongs to the page: page:ffff0008f9be1c88 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 raw: 0008d00000000000 ffff0008f9be1c90 ffff0008f9be1c90 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff page dumped because: kasan: bad access detected addr ffff0008c89a7410 is located in stack of task swapper/0/1 at offset 112 in frame: zynqmp_clock_probe+0x0/0x7b8 this frame has 3 objects: [32, 44) 'response' [64, 80) 'ret_payload' [96, 112) 'name' Memory state around the buggy address: ffff0008c89a7300: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7380: 00 00 00 00 f1 f1 f1 f1 00 04 f2 f2 00 00 f2 f2 >ffff0008c89a7400: 00 00 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffff0008c89a7480: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff0008c89a7500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== | ||||
| CVE-2022-50857 | 1 Linux | 1 Linux Kernel | 2026-04-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rapidio: rio: fix possible name leak in rio_register_mport() If device_register() returns error, the name allocated by dev_set_name() need be freed. It should use put_device() to give up the reference in the error path, so that the name can be freed in kobject_cleanup(), and list_del() is called to delete the port from rio_mports. | ||||
| CVE-2022-50784 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: iwlwifi: mei: fix potential NULL-ptr deref after clone If cloning the SKB fails, don't try to use it, but rather return as if we should pass it. Coverity CID: 1503456 | ||||
| CVE-2025-68293 | 1 Linux | 1 Linux Kernel | 2026-04-15 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: fix NULL pointer deference when splitting folio Commit c010d47f107f ("mm: thp: split huge page to any lower order pages") introduced an early check on the folio's order via mapping->flags before proceeding with the split work. This check introduced a bug: for shmem folios in the swap cache and truncated folios, the mapping pointer can be NULL. Accessing mapping->flags in this state leads directly to a NULL pointer dereference. This commit fixes the issue by moving the check for mapping != NULL before any attempt to access mapping->flags. | ||||