Export limit exceeded: 420535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 420535 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (420535 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31395 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: fix OOB access in DBG_BUF_PRODUCER async event handler The ASYNC_EVENT_CMPL_EVENT_ID_DBG_BUF_PRODUCER handler in bnxt_async_event_process() uses a firmware-supplied 'type' field directly as an index into bp->bs_trace[] without bounds validation. The 'type' field is a 16-bit value extracted from DMA-mapped completion ring memory that the NIC writes directly to host RAM. A malicious or compromised NIC can supply any value from 0 to 65535, causing an out-of-bounds access into kernel heap memory. The bnxt_bs_trace_check_wrap() call then dereferences bs_trace->magic_byte and writes to bs_trace->last_offset and bs_trace->wrapped, leading to kernel memory corruption or a crash. Fix by adding a bounds check and defining BNXT_TRACE_MAX as DBG_LOG_BUFFER_FLUSH_REQ_TYPE_ERR_QPC_TRACE + 1 to cover all currently defined firmware trace types (0x0 through 0xc). | ||||
| CVE-2026-31394 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac80211: fix crash in ieee80211_chan_bw_change for AP_VLAN stations ieee80211_chan_bw_change() iterates all stations and accesses link->reserved.oper via sta->sdata->link[link_id]. For stations on AP_VLAN interfaces (e.g. 4addr WDS clients), sta->sdata points to the VLAN sdata, whose link never participates in chanctx reservations. This leaves link->reserved.oper zero-initialized with chan == NULL, causing a NULL pointer dereference in __ieee80211_sta_cap_rx_bw() when accessing chandef->chan->band during CSA. Resolve the VLAN sdata to its parent AP sdata using get_bss_sdata() before accessing link data. [also change sta->sdata in ARRAY_SIZE even if it doesn't matter] | ||||
| CVE-2026-31390 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix memory leak in xe_vm_madvise_ioctl When check_bo_args_are_sane() validation fails, jump to the new free_vmas cleanup label to properly free the allocated resources. This ensures proper cleanup in this error path. (cherry picked from commit 29bd06faf727a4b76663e4be0f7d770e2d2a7965) | ||||
| CVE-2026-23475 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: fix statistics allocation The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres). | ||||
| CVE-2026-23472 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: core: fix infinite loop in handle_tx() for PORT_UNKNOWN uart_write_room() and uart_write() behave inconsistently when xmit_buf is NULL (which happens for PORT_UNKNOWN ports that were never properly initialized): - uart_write_room() returns kfifo_avail() which can be > 0 - uart_write() checks xmit_buf and returns 0 if NULL This inconsistency causes an infinite loop in drivers that rely on tty_write_room() to determine if they can write: while (tty_write_room(tty) > 0) { written = tty->ops->write(...); // written is always 0, loop never exits } For example, caif_serial's handle_tx() enters an infinite loop when used with PORT_UNKNOWN serial ports, causing system hangs. Fix by making uart_write_room() also check xmit_buf and return 0 if it's NULL, consistent with uart_write(). Reproducer: https://gist.github.com/mrpre/d9a694cc0e19828ee3bc3b37983fde13 | ||||
| CVE-2026-23468 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Limit BO list entry count to prevent resource exhaustion Userspace can pass an arbitrary number of BO list entries via the bo_number field. Although the previous multiplication overflow check prevents out-of-bounds allocation, a large number of entries could still cause excessive memory allocation (up to potentially gigabytes) and unnecessarily long list processing times. Introduce a hard limit of 128k entries per BO list, which is more than sufficient for any realistic use case (e.g., a single list containing all buffers in a large scene). This prevents memory exhaustion attacks and ensures predictable performance. Return -EINVAL if the requested entry count exceeds the limit (cherry picked from commit 688b87d39e0aa8135105b40dc167d74b5ada5332) | ||||
| CVE-2026-23467 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/dmc: Fix an unlikely NULL pointer deference at probe intel_dmc_update_dc6_allowed_count() oopses when DMC hasn't been initialized, and dmc is thus NULL. That would be the case when the call path is intel_power_domains_init_hw() -> {skl,bxt,icl}_display_core_init() -> gen9_set_dc_state() -> intel_dmc_update_dc6_allowed_count(), as intel_power_domains_init_hw() is called *before* intel_dmc_init(). However, gen9_set_dc_state() calls intel_dmc_update_dc6_allowed_count() conditionally, depending on the current and target DC states. At probe, the target is disabled, but if DC6 is enabled, the function is called, and an oops follows. Apparently it's quite unlikely that DC6 is enabled at probe, as we haven't seen this failure mode before. It is also strange to have DC6 enabled at boot, since that would require the DMC firmware (loaded by BIOS); the BIOS loading the DMC firmware and the driver stopping / reprogramming the firmware is a poorly specified sequence and as such unlikely an intentional BIOS behaviour. It's more likely that BIOS is leaving an unintentionally enabled DC6 HW state behind (without actually loading the required DMC firmware for this). The tracking of the DC6 allowed counter only works if starting / stopping the counter depends on the _SW_ DC6 state vs. the current _HW_ DC6 state (since stopping the counter requires the DC5 counter captured when the counter was started). Thus, using the HW DC6 state is incorrect and it also leads to the above oops. Fix both issues by using the SW DC6 state for the tracking. This is v2 of the fix originally sent by Jani, updated based on the first Link: discussion below. (cherry picked from commit 2344b93af8eb5da5d496b4e0529d35f0f559eaf0) | ||||
| CVE-2026-23454 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: net: mana: fix use-after-free in mana_hwc_destroy_channel() by reordering teardown A potential race condition exists in mana_hwc_destroy_channel() where hwc->caller_ctx is freed before the HWC's Completion Queue (CQ) and Event Queue (EQ) are destroyed. This allows an in-flight CQ interrupt handler to dereference freed memory, leading to a use-after-free or NULL pointer dereference in mana_hwc_handle_resp(). mana_smc_teardown_hwc() signals the hardware to stop but does not synchronize against IRQ handlers already executing on other CPUs. The IRQ synchronization only happens in mana_hwc_destroy_cq() via mana_gd_destroy_eq() -> mana_gd_deregister_irq(). Since this runs after kfree(hwc->caller_ctx), a concurrent mana_hwc_rx_event_handler() can dereference freed caller_ctx (and rxq->msg_buf) in mana_hwc_handle_resp(). Fix this by reordering teardown to reverse-of-creation order: destroy the TX/RX work queues and CQ/EQ before freeing hwc->caller_ctx. This ensures all in-flight interrupt handlers complete before the memory they access is freed. | ||||
| CVE-2026-23452 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PM: runtime: Fix a race condition related to device removal The following code in pm_runtime_work() may dereference the dev->parent pointer after the parent device has been freed: /* Maybe the parent is now able to suspend. */ if (parent && !parent->power.ignore_children) { spin_unlock(&dev->power.lock); spin_lock(&parent->power.lock); rpm_idle(parent, RPM_ASYNC); spin_unlock(&parent->power.lock); spin_lock(&dev->power.lock); } Fix this by inserting a flush_work() call in pm_runtime_remove(). Without this patch blktest block/001 triggers the following complaint sporadically: BUG: KASAN: slab-use-after-free in lock_acquire+0x70/0x160 Read of size 1 at addr ffff88812bef7198 by task kworker/u553:1/3081 Workqueue: pm pm_runtime_work Call Trace: <TASK> dump_stack_lvl+0x61/0x80 print_address_description.constprop.0+0x8b/0x310 print_report+0xfd/0x1d7 kasan_report+0xd8/0x1d0 __kasan_check_byte+0x42/0x60 lock_acquire.part.0+0x38/0x230 lock_acquire+0x70/0x160 _raw_spin_lock+0x36/0x50 rpm_suspend+0xc6a/0xfe0 rpm_idle+0x578/0x770 pm_runtime_work+0xee/0x120 process_one_work+0xde3/0x1410 worker_thread+0x5eb/0xfe0 kthread+0x37b/0x480 ret_from_fork+0x6cb/0x920 ret_from_fork_asm+0x11/0x20 </TASK> Allocated by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_alloc_info+0x3d/0x50 __kasan_kmalloc+0xa0/0xb0 __kmalloc_noprof+0x311/0x990 scsi_alloc_target+0x122/0xb60 [scsi_mod] __scsi_scan_target+0x101/0x460 [scsi_mod] scsi_scan_channel+0x179/0x1c0 [scsi_mod] scsi_scan_host_selected+0x259/0x2d0 [scsi_mod] store_scan+0x2d2/0x390 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 do_syscall_64+0xee/0xfc0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 Freed by task 4314: kasan_save_stack+0x2a/0x50 kasan_save_track+0x18/0x40 kasan_save_free_info+0x3f/0x50 __kasan_slab_free+0x67/0x80 kfree+0x225/0x6c0 scsi_target_dev_release+0x3d/0x60 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_dev_release+0xacf/0x12c0 [scsi_mod] device_release+0xa3/0x220 kobject_cleanup+0x105/0x3a0 kobject_put+0x72/0xd0 put_device+0x17/0x20 scsi_device_put+0x7f/0xc0 [scsi_mod] sdev_store_delete+0xa5/0x120 [scsi_mod] dev_attr_store+0x43/0x80 sysfs_kf_write+0xde/0x140 kernfs_fop_write_iter+0x3ef/0x670 vfs_write+0x506/0x1470 ksys_write+0xfd/0x230 __x64_sys_write+0x76/0xc0 x64_sys_call+0x213/0x1810 | ||||
| CVE-2026-23448 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP16 nframes bounds check cdc_ncm_rx_verify_ndp16() validates that the NDP header and its DPE entries fit within the skb. The first check correctly accounts for ndpoffset: if ((ndpoffset + sizeof(struct usb_cdc_ncm_ndp16)) > skb_in->len) but the second check omits it: if ((sizeof(struct usb_cdc_ncm_ndp16) + ret * (sizeof(struct usb_cdc_ncm_dpe16))) > skb_in->len) This validates the DPE array size against the total skb length as if the NDP were at offset 0, rather than at ndpoffset. When the NDP is placed near the end of the NTB (large wNdpIndex), the DPE entries can extend past the skb data buffer even though the check passes. cdc_ncm_rx_fixup() then reads out-of-bounds memory when iterating the DPE array. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. | ||||
| CVE-2026-23447 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: cdc_ncm: add ndpoffset to NDP32 nframes bounds check The same bounds-check bug fixed for NDP16 in the previous patch also exists in cdc_ncm_rx_verify_ndp32(). The DPE array size is validated against the total skb length without accounting for ndpoffset, allowing out-of-bounds reads when the NDP32 is placed near the end of the NTB. Add ndpoffset to the nframes bounds check and use struct_size_t() to express the NDP-plus-DPE-array size more clearly. Compile-tested only. | ||||
| CVE-2026-23442 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: add NULL checks for idev in SRv6 paths __in6_dev_get() can return NULL when the device has no IPv6 configuration (e.g. MTU < IPV6_MIN_MTU or after NETDEV_UNREGISTER). Add NULL checks for idev returned by __in6_dev_get() in both seg6_hmac_validate_skb() and ipv6_srh_rcv() to prevent potential NULL pointer dereferences. | ||||
| CVE-2026-23441 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Prevent concurrent access to IPSec ASO context The query or updating IPSec offload object is through Access ASO WQE. The driver uses a single mlx5e_ipsec_aso struct for each PF, which contains a shared DMA-mapped context for all ASO operations. A race condition exists because the ASO spinlock is released before the hardware has finished processing WQE. If a second operation is initiated immediately after, it overwrites the shared context in the DMA area. When the first operation's completion is processed later, it reads this corrupted context, leading to unexpected behavior and incorrect results. This commit fixes the race by introducing a private context within each IPSec offload object. The shared ASO context is now copied to this private context while the ASO spinlock is held. Subsequent processing uses this saved, per-object context, ensuring its integrity is maintained. | ||||
| CVE-2026-23439 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: udp_tunnel: fix NULL deref caused by udp_sock_create6 when CONFIG_IPV6=n When CONFIG_IPV6 is disabled, the udp_sock_create6() function returns 0 (success) without actually creating a socket. Callers such as fou_create() then proceed to dereference the uninitialized socket pointer, resulting in a NULL pointer dereference. The captured NULL deref crash: BUG: kernel NULL pointer dereference, address: 0000000000000018 RIP: 0010:fou_nl_add_doit (net/ipv4/fou_core.c:590 net/ipv4/fou_core.c:764) [...] Call Trace: <TASK> genl_family_rcv_msg_doit.constprop.0 (net/netlink/genetlink.c:1114) genl_rcv_msg (net/netlink/genetlink.c:1194 net/netlink/genetlink.c:1209) [...] netlink_rcv_skb (net/netlink/af_netlink.c:2550) genl_rcv (net/netlink/genetlink.c:1219) netlink_unicast (net/netlink/af_netlink.c:1319 net/netlink/af_netlink.c:1344) netlink_sendmsg (net/netlink/af_netlink.c:1894) __sock_sendmsg (net/socket.c:727 (discriminator 1) net/socket.c:742 (discriminator 1)) __sys_sendto (./include/linux/file.h:62 (discriminator 1) ./include/linux/file.h:83 (discriminator 1) net/socket.c:2183 (discriminator 1)) __x64_sys_sendto (net/socket.c:2213 (discriminator 1) net/socket.c:2209 (discriminator 1) net/socket.c:2209 (discriminator 1)) do_syscall_64 (arch/x86/entry/syscall_64.c:63 (discriminator 1) arch/x86/entry/syscall_64.c:94 (discriminator 1)) entry_SYSCALL_64_after_hwframe (net/arch/x86/entry/entry_64.S:130) This patch makes udp_sock_create6 return -EPFNOSUPPORT instead, so callers correctly take their error paths. There is only one caller of the vulnerable function and only privileged users can trigger it. | ||||
| CVE-2026-23436 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: shaper: protect from late creation of hierarchy We look up a netdev during prep of Netlink ops (pre- callbacks) and take a ref to it. Then later in the body of the callback we take its lock or RCU which are the actual protections. The netdev may get unregistered in between the time we take the ref and the time we lock it. We may allocate the hierarchy after flush has already run, which would lead to a leak. Take the instance lock in pre- already, this saves us from the race and removes the need for dedicated lock/unlock callbacks completely. After all, if there's any chance of write happening concurrently with the flush - we're back to leaking the hierarchy. We may take the lock for devices which don't support shapers but we're only dealing with SET operations here, not taking the lock would be optimizing for an error case. | ||||
| CVE-2026-23430 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: Don't overwrite KMS surface dirty tracker We were overwriting the surface's dirty tracker here causing a memory leak. | ||||
| CVE-2026-23421 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/configfs: Free ctx_restore_mid_bb in release ctx_restore_mid_bb memory is allocated in wa_bb_store(), but xe_config_device_release() only frees ctx_restore_post_bb. Free ctx_restore_mid_bb[0].cs as well to avoid leaking the allocation when the configfs device is removed. (cherry picked from commit a235e7d0098337c3f2d1e8f3610c719a589e115f) | ||||
| CVE-2026-23418 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/reg_sr: Fix leak on xa_store failure Free the newly allocated entry when xa_store() fails to avoid a memory leak on the error path. v2: use goto fail_free. (Bala) (cherry picked from commit 6bc6fec71ac45f52db609af4e62bdb96b9f5fadb) | ||||
| CVE-2026-23417 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix constant blinding for PROBE_MEM32 stores BPF_ST | BPF_PROBE_MEM32 immediate stores are not handled by bpf_jit_blind_insn(), allowing user-controlled 32-bit immediates to survive unblinded into JIT-compiled native code when bpf_jit_harden >= 1. The root cause is that convert_ctx_accesses() rewrites BPF_ST|BPF_MEM to BPF_ST|BPF_PROBE_MEM32 for arena pointer stores during verification, before bpf_jit_blind_constants() runs during JIT compilation. The blinding switch only matches BPF_ST|BPF_MEM (mode 0x60), not BPF_ST|BPF_PROBE_MEM32 (mode 0xa0). The instruction falls through unblinded. Add BPF_ST|BPF_PROBE_MEM32 cases to bpf_jit_blind_insn() alongside the existing BPF_ST|BPF_MEM cases. The blinding transformation is identical: load the blinded immediate into BPF_REG_AX via mov+xor, then convert the immediate store to a register store (BPF_STX). The rewritten STX instruction must preserve the BPF_PROBE_MEM32 mode so the architecture JIT emits the correct arena addressing (R12-based on x86-64). Cannot use the BPF_STX_MEM() macro here because it hardcodes BPF_MEM mode; construct the instruction directly instead. | ||||
| CVE-2026-23401 | 1 Linux | 1 Linux Kernel | 2026-11-05 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Drop/zap existing present SPTE even when creating an MMIO SPTE When installing an emulated MMIO SPTE, do so *after* dropping/zapping the existing SPTE (if it's shadow-present). While commit a54aa15c6bda3 was right about it being impossible to convert a shadow-present SPTE to an MMIO SPTE due to a _guest_ write, it failed to account for writes to guest memory that are outside the scope of KVM. E.g. if host userspace modifies a shadowed gPTE to switch from a memslot to emulted MMIO and then the guest hits a relevant page fault, KVM will install the MMIO SPTE without first zapping the shadow-present SPTE. ------------[ cut here ]------------ is_shadow_present_pte(*sptep) WARNING: arch/x86/kvm/mmu/mmu.c:484 at mark_mmio_spte+0xb2/0xc0 [kvm], CPU#0: vmx_ept_stale_r/4292 Modules linked in: kvm_intel kvm irqbypass CPU: 0 UID: 1000 PID: 4292 Comm: vmx_ept_stale_r Not tainted 7.0.0-rc2-eafebd2d2ab0-sink-vm #319 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:mark_mmio_spte+0xb2/0xc0 [kvm] Call Trace: <TASK> mmu_set_spte+0x237/0x440 [kvm] ept_page_fault+0x535/0x7f0 [kvm] kvm_mmu_do_page_fault+0xee/0x1f0 [kvm] kvm_mmu_page_fault+0x8d/0x620 [kvm] vmx_handle_exit+0x18c/0x5a0 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc55/0x1c20 [kvm] kvm_vcpu_ioctl+0x2d5/0x980 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb5/0x730 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x47fa3f </TASK> ---[ end trace 0000000000000000 ]--- | ||||