Export limit exceeded: 383050 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (383050 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74691 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: thunderbolt: Tear down DMA paths before stopping the rings tbnet_tear_down() stops both rings and frees their frame buffers before calling tb_xdomain_disable_paths(). tb_ring_stop() zeroes the ring's descriptor base and tbnet_free_buffers() unmaps and frees the pages the frames sit in, so by the time __tb_path_deactivate_hop() polls the hop's 'pending' bit, anything still in flight has nowhere to drain to. The teardown sequence has been in this order since the driver was added. The setup path has not: commit ff7cd07f3064 ("net: thunderbolt: Enable DMA paths only after rings are enabled") moved the path enable to the end of tbnet_connected_work() and documented why: /* Both logins successful so enable the rings, high-speed DMA * paths and start the network device queue. * * Note we enable the DMA paths last to make sure we have primed * the Rx ring before any incoming packets are allowed to * arrive. */ Teardown was never updated to match, so the rings and the paths now come down in the same order they go up instead of in reverse. On an ASMedia ASM4242 host router the 'pending' bit then never clears: every teardown burns the full 500 ms timeout and __tb_path_deactivate_hop() returns -ETIMEDOUT. Raising the timeout to 5 s does not help, so the hop is not slow to drain, it never drains at all. The failure is invisible above the thunderbolt core. __tb_path_deactivate_hops() is void and only calls tb_port_warn(); tb_path_deactivate(), tb_tunnel_deactivate() and __tb_disconnect_xdomain_paths() are void as well, and tb_disconnect_xdomain_paths() ends in an unconditional "return 0". So tb_xdomain_disable_paths() reports success and the netdev_warn() below it never fires. Repeated teardowns eventually take the XDomain control channel down, after which the peer node is gone and only a power cycle brings the controller back. Deactivating the paths first fixes it. Measured with kretprobes on a stock v6.17 tree with no other patches applied, on a link that was up and had just carried traffic: before: __tb_path_deactivate_hop() returns 0 for the first hop, then -ETIMEDOUT for the second 500335 us later after: 0 for both, 525 us apart Alternating the two orderings ABBA over three load levels, four teardowns per arm: every teardown failed before the change (21 of 21 that ran), none failed after (0 of 24). The before arms ran short because the link died partway through. The same split shows up when the interface is enslaved to a bond instead of just brought down, which is how I ran into this in the first place. Throughput and latency after the change are unchanged. Hosts whose routers drain the hop despite the stale descriptor base see no functional difference, since the paths end up deactivated either way. | ||||
| CVE-2026-58016 | 2 Gnome, Redhat | 14 Glib, Discovery, Enterprise Linux and 11 more | 2026-08-25 | 7.5 High |
| A flaw was found in GLib. A state confusion issue exists in g_dbus_node_info_new_for_xml() in the gio/gdbusintrospection.c file when processing malformed D-Bus introspection XML, specifically with a `node` element nested within other elements like `method`, `signal`, `property` or `arg`. This issue can cause an unsigned integer overflow and lead to an out-of-bounds read, resulting in a denial of service. | ||||
| CVE-2026-42010 | 2 Gnu, Redhat | 15 Gnutls, Ai Inference Server, Discovery and 12 more | 2026-08-25 | 7.1 High |
| A flaw was found in gnutls. Servers configured with RSA-PSK (Rivest–Shamir–Adleman – Pre-Shared Key) wrongfully matched usernames containing a NUL character with truncated usernames. A remote attacker could exploit this by sending a specially crafted username, leading to an authentication bypass. This vulnerability allows an attacker to gain unauthorized access by circumventing the authentication process. | ||||
| CVE-2026-42009 | 2 Gnu, Redhat | 26 Gnutls, Ai Inference Server, Discovery and 23 more | 2026-08-25 | 7.5 High |
| A flaw was found in gnutls. A remote attacker could exploit an issue in the Datagram Transport Layer Security (DTLS) packet reordering logic. The comparator function, responsible for ordering DTLS packets by sequence numbers, did not correctly handle packets with duplicate sequence numbers. This could lead to unstable packet ordering or undefined behavior, resulting in a denial of service. | ||||
| CVE-2026-33846 | 2 Gnu, Redhat | 16 Gnutls, Ai Inference Server, Discovery and 13 more | 2026-08-25 | 7.5 High |
| A heap buffer overflow vulnerability exists in the DTLS handshake fragment reassembly logic of GnuTLS. The issue arises in merge_handshake_packet() where incoming handshake fragments are matched and merged based solely on handshake type, without validating that the message_length field remains consistent across all fragments of the same logical message. An attacker can exploit this by sending crafted DTLS fragments with conflicting message_length values, causing the implementation to allocate a buffer based on a smaller initial fragment and subsequently write beyond its bounds using larger, inconsistent fragments. Because the merge operation does not enforce proper bounds checking against the allocated buffer size, this results in an out-of-bounds write on the heap. The vulnerability is remotely exploitable without authentication via the DTLS handshake path and can lead to application crashes or potential memory corruption. | ||||
| CVE-2026-33845 | 2 Gnu, Redhat | 16 Gnutls, Ai Inference Server, Discovery and 13 more | 2026-08-25 | 7.5 High |
| A flaw in GnuTLS DTLS handshake parsing allows malformed fragments with zero length and non-zero offset, leading to an integer underflow during reassembly and resulting in an out-of-bounds read. This issue is remotely exploitable and may cause information disclosure or denial of service. | ||||
| CVE-2026-4878 | 2 Libcap Project, Redhat | 18 Libcap, Ai Inference Server, Cost Management and 15 more | 2026-08-25 | 6.7 Medium |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. | ||||
| CVE-2026-74598 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fix Route Information option length validation rt6_route_rcv() validates the Route Information option (RFC 4191) length against the prefix length, but both checks are off by one. rinfo->length is the ND option length in units of 8 octets and it *includes* the 8-byte option header, so an option carrying N bytes of prefix has length == 1 + N/8. RFC 4191 section 2.3 requires length 3 when Prefix Length is greater than 64, and 2 or 3 when it is greater than 0. The code accepts length >= 2 and length >= 1 respectively. ipv6_addr_prefix() then copies prefix_len/8 bytes out of rinfo->prefix, so a Router Advertisement with (prefix_len=128, length=2) or (prefix_len=64, length=1) makes the kernel read up to 8 bytes past the end of the option. Those bytes end up in the prefix of the route that gets installed, so they are visible to userspace: # RA with a Route Information option (prefix_len=128, length=2) # followed by a source link-layer address option, 01 01 de ad be ef ca fe $ ip -6 route show 2001:db8:dead:beef:101:dead:beef:cafe via fe80::1234 dev veth0 proto ra ^^^^^^^^^^^^^^^^^^ the next option, read out of bounds When the Route Information option is the last one in the packet, those eight bytes come from the skb tail room instead. Reject the option lengths RFC 4191 does not allow. | ||||
| CVE-2026-74616 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xdp: reject clones that overrun skb_shared_info tailroom xdpf_clone() clones broadcast copies into a single page and sets frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that page like a normal XDP frame and expects the usual skb_shared_info tailroom at the end of the buffer. The current check only rejects frames whose linear xdp_frame header, headroom, and packet data exceed PAGE_SIZE. A source frame backed by a larger allocation can still satisfy that check while extending into the clone's required shared-info area. When such a clone is converted back into an skb, build_skb_around() places skb_shared_info over live packet bytes and later writes can corrupt XDP return metadata. Reject clones unless their linear area fits inside SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already enforced by the XDP-to-skb conversion path. | ||||
| CVE-2026-63587 | 1 Weidmueller | 1 Fwr Ie Sr 2tx Wl 4g Eu Us | 2026-08-25 | 8.6 High |
| The SMS control function of IE-SR-2TX-WL-4G devices can require a password for SMS commands via the 'Enable Password Authorization' setting. The device increments a retry counter on each failed SMS password attempt; after 5 consecutive failed attempts, SMS password authorization is automatically disabled. An unauthenticated remote attacker who is able to send SMS messages to the device can deliberately trigger this by submitting 5 or more invalid passwords, after which subsequent SMS commands are executed without requiring a password, resulting in potential limited configuration tampering, limited information leakage and potentially full loss of availability. | ||||
| CVE-2026-71365 | 1 Redhat | 3 Ansible Automation Platform, Ansible Automation Platform Developer, Ansible Automation Platform Inside | 2026-08-25 | 7.7 High |
| A server-side request forgery (SSRF) vulnerability was found in AWX's webhook status callback mechanism. When processing GitHub pull request webhooks, AWX extracts the status callback URL (pull_request.statuses_url) from the incoming webhook payload without validating the target host against the expected Git provider. This URL is persisted in job extra variables and later used to send authenticated status updates. A user with admin role on a webhook-enabled job template can read the template's webhook signing key, forge a signed GitHub webhook payload with an arbitrary statuses_url, and cause AWX to POST status updates to an attacker-controlled or internal URL. The status update request includes the configured Git Personal Access Token (PAT) in the Authorization header, resulting in credential leakage to the attacker-specified endpoint. | ||||
| CVE-2026-17527 | 1 Redhat | 2 Container Native Virtualization, Openshift Virtualization | 2026-08-25 | 7.7 High |
| In containerized-data-importer (CDI), the aggregated cdi.kubevirt.io:view ClusterRole, intended to provide read-only access to CDI resources, includes a rule granting create on the datavolumes/source subresource. CDI's DataVolume clone authorization accepts this permission as sufficient to authorize cloning the contents of any PVC the caller can name, without requiring write access to the source namespace. A user or service account bound to the view role, commonly granted cluster-wide via ClusterRoleBinding, who also has ordinary write access (edit/admin) to any single namespace, can use this to exfiltrate the contents of any PVC in the cluster into a namespace they control, bypassing namespace isolation and the read-only guarantee of the view role. | ||||
| CVE-2026-74601 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ring-buffer: Use current_context for safe per-CPU buffer swap The ring_buffer_swap_cpu() function currently checks the per-CPU committing counter to determine if a buffer is actively being written to before performing the swap. However, there exists a race window where this check can be bypassed: ring_buffer_lock_reserve cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_a rb_reserve_next_event rb_start_commit // inc committing if (unlikely(READ_ONCE(cpu_buffer->buffer) != buffer)) {...} __rb_reserve_next rb_move_tail rb_end_commit(cpu_buffer); // dec committing => 0 /* interrupt hits here, successfully swaps! */ local_inc(&cpu_buffer->committing); ring_buffer_unlock_commit cpu_buffer = buffer->buffers[cpu]; // cpu_buffer_b rb_commit rb_end_commit RB_WARN_ON(cpu_buffer, !local_read(&cpu_buffer->committing)) // triggers warning The committing counter can temporarily drop to 0 during a single write operation (within rb_move_tail), creating a window where swap can succeed even though the write is still in progress. This leads to inconsistent buffer state and triggers the RB_WARN_ON in rb_commit(). Replace the committing counter check with current_context checks, which are set at the entry of ring_buffer_lock_reserve() and remain valid throughout the entire write operation, providing a reliable indicator of buffer busy state during swap. | ||||
| CVE-2026-77117 | 2026-08-25 | 5.9 Medium | ||
| A flaw was found in glibc. A remote attacker could exploit this vulnerability by providing specially crafted input during SHIFT_JISX0213 to UCS-4 text conversion. This crafted input can cause the application to repeatedly emit a buffered code point without consuming further input, leading to persistent retry churn. This can result in a denial of service (DoS) for callers converting untrusted text. | ||||
| CVE-2026-74663 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: reject overly deep qdisc hierarchies Deep qdisc hierarchies can lead to excessive recursion in qdisc tree walkers and exhaust the kernel stack. The existing loop check does not cover the create-and-graft path, so a hierarchy can still be extended by creating a new child qdisc below an already deep parent. Store the hierarchy depth in struct Qdisc and update it when qdiscs are grafted. Reject new child qdiscs once the parent is already at the maximum allowed depth. | ||||
| CVE-2026-74715 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix netns reference imbalance in conntrack kfuncs The opts argument of the BPF conntrack kfuncs can point to a shared map value. __bpf_nf_ct_lookup() and __bpf_nf_ct_alloc_entry() read opts->netns_id separately when acquiring and releasing the network namespace reference. The reference imbalance can occur as follows: CPU 0 CPU 1 read opts->netns_id (-1) skip get_net_ns_by_id() write opts->netns_id (id) read opts->netns_id (id) put_net(net) /* no matching get */ The reverse transition leaks the reference. Repeating the unmatched put can destroy a live namespace and crash later users. The kernel reported: Oops: general protection fault, probably for non-canonical address KASAN: null-ptr-deref in range [0x00000000000000e8-0x00000000000000ef] RIP: 0010:bpf_prog_test_run_xdp+0x52c/0x1700 Call Trace: __sys_bpf+0x1662/0x50c0 __x64_sys_bpf+0x73/0xb0 do_syscall_64+0xf9/0x540 entry_SYSCALL_64_after_hwframe+0x77/0x7f Kernel panic - not syncing: Fatal exception Snapshot every input field of opts with READ_ONCE() before validating or using it. The netns_id snapshot keeps the namespace get/put pair balanced, while the other snapshots keep the remaining options from changing partway through an invocation. The individual reads can still observe an inconsistent combination during a concurrent update, but each selected field value remains stable for that invocation. | ||||
| CVE-2026-74727 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: skip rehash for peers already removed from by_id ovpn_nl_peer_set_doit() resolves the target peer via ovpn_peer_get_by_id() before taking ovpn->lock. In the window between the lookup (which only takes a refcount) and the subsequent spin_lock_bh(&ovpn->lock), a concurrent OVPN_CMD_PEER_DEL, keepalive expiry, or socket teardown can take ovpn->lock first, run ovpn_peer_remove() to unhash the peer from all four tables (by_id, by_vpn_addr4/6, by_transp_addr) and release the lock. set_doit then acquires ovpn->lock and calls ovpn_peer_hash_vpn_ip(), which re-inserts the now-removed peer back into the rehashing tables. The same race affects the float path: ovpn_peer_endpoints_update() holds only a refcount and acquires ovpn->lock very late (after async AEAD decrypt and a netlink notification), then rehashes the peer in the by_transp_addr table. The resurrected peer becomes reachable again from the RX lookup (ovpn_peer_get_by_transp_addr) and the TX VPN-IP lookup, even though userspace believes it is gone. Once the data-path refcount drops the peer is freed via call_rcu while the hash entries embedded in it remain linked, opening a UAF window. Bail out of the rehash when hash_entry_id is unhashed, mirroring the sentinel already used by ovpn_peer_remove() to detect the already-removed state. The check is safe under ovpn->lock, which serializes every mutation of hash_entry_id, and is a no-op for the add path because ovpn_peer_add_mp() inserts hash_entry_id before calling ovpn_peer_hash_vpn_ip(). | ||||
| CVE-2026-78322 | 1 Redhat | 1 Enterprise Linux | 2026-08-25 | 6.5 Medium |
| A flaw was found in file-roller. When opening or extracting a malicious 7z or RAR archive containing a file entry with an excessively long path, file-roller's progress-line parsing copies the path into a fixed-size stack buffer using an unbounded string copy. This can trigger a stack buffer overflow and cause file-roller to terminate, resulting in a denial of service. To exploit this flaw, a victim must open or extract the crafted archive using file-roller. | ||||
| CVE-2026-78562 | 2026-08-25 | 8.1 High | ||
| The Verdure Core plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 1.2. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. | ||||
| CVE-2026-74675 | 1 Linux | 1 Linux Kernel | 2026-08-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: vt: stabilize tty reference in kbd_keycode with tty_port_tty_get kbd_keycode() reads vc->port.tty without acquiring a tty reference, racing against con_shutdown() which clears port.tty under a different lock. Use tty_port_tty_get()/tty_kref_put() to hold a proper reference for the duration the tty pointer is needed. | ||||