Export limit exceeded: 425120 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (425120 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-64505 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: function: rndis: add length check for header Add a length check for the rndis header in rndis_rm_hdr, to ensure that MessageType, MessageLength, DataOffset, and DataLength fields are present before they are accessed. | ||||
| CVE-2026-64504 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iio: accel: bmc150: clamp the device-reported FIFO frame count __bmc150_accel_fifo_flush() copies the number of samples the device reports in its hardware FIFO into an on-stack buffer u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3]; which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The frame count is read from the FIFO_STATUS register and only masked to its 7 valid bits: count = val & 0x7F; so it can be 0..127. The only other limit applied to it is the optional caller-supplied sample budget: if (samples && count > samples) count = samples; which does not constrain count on the flush-all path (samples == 0), and leaves it well above 32 whenever samples is larger. count samples are then transferred into buffer[]: bmc150_accel_fifo_transfer(data, (u8 *)buffer, count); bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a malfunctioning, malicious or counterfeit accelerometer (or an attacker tampering with the I2C/SPI bus) that reports up to 127 frames writes up to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up to 570 bytes that clobbers the stack canary, saved registers and the return address. Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[] is sized for, before the transfer, mirroring the watermark clamp already done in bmc150_accel_set_watermark(). A well-formed flush reports at most BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. | ||||
| CVE-2026-98432 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: free inet_opt and ireq_opt after an RCU grace period tcp_v4_syn_recv_sock() transfers ownership of ireq->ireq_opt to the child socket (newinet->inet_opt) without copying it. Another cpu can concurrently process a retransmitted SYN for the same request socket, and send a SYNACK from tcp_check_req(). tcp_v4_send_synack() and inet_csk_route_req() read ireq->ireq_opt under rcu_read_lock() only, and ip_build_and_send_pkt() and ip_options_build() then read opt->optlen twice. Note that the SYNACK timer itself is not an issue: it holds a reference on its request socket, and inet_csk_reqsk_queue_drop() calls timer_delete_sync() before the child can be freed. Since commit 079096f103fa ("tcp/dccp: install syn_recv requests into ehash table"), request sockets are processed without holding the listener lock, so nothing prevents the child socket from being freed while the SYNACK is still being built. TCP child sockets do not have SOCK_RCU_FREE, and inet_sock_destruct() frees inet_opt with a plain kfree(), leading to a use-after-free in ip_options_build(). A similar issue exists with request socket migration (net.ipv4.tcp_migrate_req=1, or a BPF_SK_REUSEPORT_SELECT_OR_MIGRATE program). reqsk_timer_handler() clones the request socket with inet_reqsk_clone(), so that the old request socket and its clone share the same ireq_opt, then reqsk_migrate_reset() clears the pointer in the old one. Another cpu holding a reference on the old request socket can still be using these options (sending a SYNACK, or creating a child in tcp_v4_syn_recv_sock()) when the clone is freed, and tcp_v4_reqsk_destructor() also uses a plain kfree(). Readers already use RCU, and other paths replacing inet_opt (do_ip_setsockopt(), cipso_v4_sock_setattr()...) already use kfree_rcu(). Use kfree_rcu() in inet_sock_destruct() and tcp_v4_reqsk_destructor() as well. IPv6 is not affected by the first issue, because tcp_v6_syn_recv_sock() duplicates the options. tcp_v6_reqsk_destructor() has the same migration issue with ipv6_opt, which is only set by CALIPSO. This will be addressed in a separate patch. | ||||
| CVE-2026-71363 | 1 Redhat | 1 Ansible Automation Platform | 2026-11-12 | 5.3 Medium |
| A flaw was found in AWX. The debug API endpoints (/api/debug/task_manager/, /api/debug/dependency_manager/, /api/debug/workflow_manager/) are registered unconditionally in the URL configuration and use AllowAny permission class with _ignore_model_permissions=True. This allows an unauthenticated remote attacker to repeatedly invoke scheduler operations that acquire database advisory locks and open transactions, potentially leading to resource exhaustion and degraded service availability. | ||||
| CVE-2026-13387 | 2026-11-12 | 3.5 Low | ||
| A vulnerability related to URL redirection handling during the sign-out flow that could allow a user to be redirected to unintended external content under specific conditions. | ||||
| CVE-2026-127101 | 1 Redhat | 3 Enterprise Linux, Openshift, Rhel Els | 2026-11-12 | 5.5 Medium |
| A flaw was found in SSSD's PAM responder. A local attacker can send an authentication request without first negotiating the client protocol version. The responder dereferences a NULL protocol-version pointer and crashes, disrupting SSSD-backed authentication. Repeated crafted requests can sustain the denial of service. | ||||
| CVE-2026-126837 | 2026-11-12 | 7.4 High | ||
| A validation flaw in the DNS SRV host discovery of the MongoDB Node.js driver may cause the driver to connect to a host outside the expected domain. For a mongodb+srv:// connection string, the driver checks each host name in the DNS SRV response against the domain of the connection string. The driver then builds the connection address from the original name, in which certain characters end the host name early. An unauthenticated party who can forge or change the DNS SRV response may redirect the connection to a host of their choice. TLS does not prevent this, because the driver verifies the server certificate against the redirected host name. This may result in unintended disclosure of application data and authentication credentials, and in altered query results. Applications that use mongodb:// connection strings are not affected. | ||||
| CVE-2026-124077 | 1 Apache | 1 Commons Codec | 2026-11-12 | 4.3 Medium |
| The GitIdentifiers class in Apache Commons Codec did not reject NUL bytes in tree entry names. Because Git uses a NUL byte to mark the end of each entry name in a tree object, a crafted name could make one tree serialize to the same bytes as a different tree. Two different directory trees could then receive the same Git tree identifier or SWHID. The impact is limited: common file systems do not allow NUL bytes in file names, so trees built by walking a file system are not affected. Only applications that build trees from names supplied by other sources, such as entries of archive formats that permit NUL bytes in names (e.g. ZIP) or names passed directly to the API, are exposed. This issue affects Apache Commons Codec: from 1.22.0 before 1.23.0. Users are recommended to upgrade to version 1.23.0, which fixes the issue. | ||||
| CVE-2026-119078 | 1 Apache | 1 Commons Codec | 2026-11-12 | 9.1 Critical |
| Apache Commons Codec's Blake3 class documented the output of its doFinalize methods as depending on any previously finalized bytes, so that consecutive calls would return different output. In fact, doFinalize does not change the hash state: calling it again without supplying more input returns the same bytes. The key-derivation example in the class Javadoc, shipped since 1.16.0, derives two keys with two consecutive doFinalize calls. Code that follows it gets identical keys, so the separation between the derived keys is lost. The same applies to any application that calls doFinalize more than once on one instance and expects new output each time. This issue affects Apache Commons Codec from 1.16.0 before 1.23.0. Version 1.23.0 corrects the documentation, but the behavior of doFinalize is unchanged. Upgrading alone does not fix affected code. Users should check their applications for repeated doFinalize calls on the same Blake3 instance and derive multiple keys by requesting the combined length in one call and splitting the output, as the updated Javadoc shows. | ||||
| CVE-2026-126155 | 1 Fortinet | 1 Fortimail | 2026-11-12 | 9.1 Critical |
| A incorrect authorization vulnerability in Fortinet FortiMail 8.0.0 through 8.0.1, FortiMail 7.6.0 through 7.6.6, FortiMail 7.4.0 through 7.4.8, FortiMail 7.2 all versions may allow an unauthenticated remote attacker to obtain an authenticated IBE webmail session as any IBE recipient and read or send their encrypted mail via crafted HTTP requests. | ||||
| CVE-2026-119960 | 1 Microsoft | 10 Windows 11 24h2, Windows 11 24h2, Windows 11 25h2 and 7 more | 2026-11-12 | 7.5 High |
| Use of uninitialized resource in Windows Hyper-V allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-119964 | 1 Microsoft | 23 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 20 more | 2026-11-12 | 8.1 High |
| Double free in Windows Message Queuing allows an unauthorized attacker to execute code over a network. | ||||
| CVE-2026-119965 | 1 Microsoft | 11 Windows 11 23h2, Windows 11 23h2, Windows 11 24h2 and 8 more | 2026-11-12 | 6.4 Medium |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-124023 | 1 Apache | 1 Apache Axis2\/c | 2026-11-12 | N/A |
| Out-of-bounds Read vulnerability in the Guththila XML parser wrapper of Apache Axis2/C. On some malformed XML input the Guththila parser returned a raw input byte in place of an event code, and the AXIOM reader wrapper used that value as an index into a ten-entry lookup table without checking its range, reading heap memory past the end of the table. An unauthenticated client could trigger this by sending a crafted XML request to a server built with Guththila, the default parser, causing the request to be parsed incorrectly or, in some cases, the process to crash. The memory read is not returned to the client. This issue affects Apache Axis2/C: through 2.0.0. The fix is available in commits 23110287924e79d05a5b4712298c355d1f05c606 and f01683ec10e8fddb87279ec9351b3239021223e6 and will be included in the next release. | ||||
| CVE-2026-64487 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: caiaq: fix out-of-bounds read in the Traktor Kontrol S4 input parser snd_usb_caiaq_tks4_dispatch() decodes the Traktor Kontrol S4 input stream in fixed 16-byte (TKS4_MSGBLOCK_SIZE) message blocks. On every iteration it advances buf and subtracts the block size while looping on "while (len)". len is urb->actual_length. That value is supplied by the device and is not guaranteed to be a multiple of 16. When a final short block leaves len between 1 and 15, the loop runs once more, reads up to buf[15], and then does "len -= TKS4_MSGBLOCK_SIZE". As len is unsigned this underflows to a huge value. The loop then keeps iterating and walking buf far past the end of the 512-byte ep4_in_buf, reading out of bounds until a bogus block id happens to be hit. Iterate only while a full message block is available. This stops the unsigned underflow and silently drops any trailing partial block, which carries no complete control value anyway. The sibling endpoint-4 parsers are not affected. The Traktor Kontrol X1 and Maschine arms in snd_usb_caiaq_ep4_reply_dispatch() floor urb->actual_length before dispatching. | ||||
| CVE-2026-117544 | 2026-11-12 | N/A | ||
| Joomla Extension - jdownloads.com - IDOR allowing restricted file downloads in jDownloads < 4.1.8 - The `other_file_id` parameter could reference another download’s file without fully enforcing the target download’s access restrictions. This allowed files to be delivered to users who were not authorised to access the target download. | ||||
| CVE-2026-64461 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: mediatek: Fix IRQ domain leak when port fails to enable When mtk_pcie_enable_port() fails, mtk_pcie_port_free() removes the port from pcie->ports and frees the port structure. However, the IRQ domains set up earlier by mtk_pcie_init_irq_domain() are never freed. Fix this by refactoring mtk_pcie_irq_teardown() into a per-port helper, mtk_pcie_irq_teardown_port(), and calling it from mtk_pcie_setup() when mtk_pcie_enable_port() fails. Since the IRQ teardown must only happen in the probe error path (during resume, child devices may have active MSI mappings and the NOIRQ context prohibits sleeping locks), mtk_pcie_enable_port() is changed to return an error code so callers can distinguish the two paths and act accordingly. This issue was reported by Sashiko while reviewing the EcoNet EN7528 SoC support series. | ||||
| CVE-2026-117542 | 2026-11-12 | N/A | ||
| Joomla Extension - jdownloads.com - Authenticated path traversal in jDownloads < 4.1.8 - A manipulated `update_file` form parameter could bypass the intended server-file selection restrictions and move files from outside the permitted selection directory or assign them to a download. This could expose file contents and remove source files from their original locations. | ||||
| CVE-2026-120467 | 2026-11-12 | N/A | ||
| Joomla / WordPress Extension - acymailing.com - Subscriber identity not bound to the record acted upon in AcyMailing 1.0.0 - 11.1.1 - An authenticated user of any privilege level can subscribe or unsubscribe any other subscriber to or from any mailing list of the site. | ||||
| CVE-2026-64473 | 1 Linux | 1 Linux Kernel | 2026-11-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: vfio: Remove device debugfs before releasing devres VFIO device debugfs files created with debugfs_create_devm_seqfile() store a devres allocated debugfs_devm_entry as inode private data. vfio_unregister_group_dev() currently calls vfio_device_del() before vfio_device_debugfs_exit(), but device_del() releases devres. This can leave debugfs entries visible with stale inode private data while unregister waits for userspace references to drain. Remove the per-device debugfs tree before vfio_device_del(). The debugfs view is diagnostic only, so losing it at the start of unregister is preferable to preserving entries whose backing storage may already have been released. Complete the teardown by clearing the per-device debugfs root after removal. This matches the global debugfs root cleanup and prevents future users from mistaking a removed dentry for a live debugfs tree during the remainder of unregister. | ||||