Export limit exceeded: 22278 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22278 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68296 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gre: fix lltx regression for GRE tunnels with SEQ/CSUM Before commit 00d066a4d4ed ("netdev_features: convert NETIF_F_LLTX to dev->lltx"), NETIF_F_LLTX was set unconditionally in both __gre_tunnel_init() and ip6gre_tnl_init_features() alongside GRE_FEATURES: dev->features |= GRE_FEATURES | NETIF_F_LLTX; When that commit converted NETIF_F_LLTX to the dev->lltx flag, it placed 'dev->lltx = true' after the SEQ/CSUM early returns instead of before them. This causes GRE/GRETAP/ip6gre tunnels with SEQ or CSUM+encap to lose lockless TX, reintroducing _xmit_lock acquisition around their ndo_start_xmit. Since GRE xmit re-enters the stack via ip_tunnel_xmit(), holding _xmit_lock risks ABBA deadlock with the underlay device. CPU0 CPU1 ---- ---- lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); lock(&qdisc_xmit_lock_key#6); lock(&qdisc_xmit_lock_key#3); Fix by moving dev->lltx = true before the early returns in both functions, restoring the original unconditional behavior. | ||||
| CVE-2026-68321 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: txgbe: fix FDIR filter leak on remove Perfect FDIR filters can be added while the interface is down and are kept on the software list for later restore. unregister_netdev() only calls ndo_stop when the device is up, so txgbe_fdir_filter_exit() in txgbe_close() is skipped in that case and the filters are leaked on driver remove. Free the filter list from txgbe_remove() as well. | ||||
| CVE-2026-68332 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: airoha: Fix potential use-after-free in airoha_ppe_deinit() airoha_ppe_deinit() replaces the NPU pointer with NULL via rcu_replace_pointer() but does not wait for existing RCU readers to exit before calling ppe_deinit() and airoha_npu_put(). This can cause a use-after-free if a reader in an RCU read-side critical section still holds a reference to the NPU when it is freed. The init path (airoha_ppe_init) already calls synchronize_rcu() after rcu_assign_pointer(), but the deinit path introduced in commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in airoha_ppe_deinit()") omitted the matching barrier when switching from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer(). Add synchronize_rcu() before ppe_deinit() to ensure all existing RCU readers have completed before the NPU resources are released. | ||||
| CVE-2026-68367 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_tcm: synchronize delayed set_alt with teardown The f_tcm set_alt() path defers endpoint setup to a work item and completes the delayed status response from process context. The delayed work uses f_tcm private state and may complete the setup request after disconnect or function teardown has already moved on. Cancel and drain the delayed set_alt work when the function is unbound or freed. For disable paths, which are reached under the composite device lock, use a small state machine and a non-sleeping cancellation path instead of cancel_work_sync(). If the work is already running, mark it cancelled and let the worker own the cleanup; otherwise tcm_disable() can cancel the queued work and clean up immediately. Also serialize the final delayed-status completion with the cancellation check while holding the composite device lock. This prevents a disconnect from clearing delayed_status while the worker is about to complete the control request. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in tcm_delayed_set_alt+0x6c/0xef0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? tcm_delayed_set_alt+0x6c/0xef0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x188/0x320 ? tcm_delayed_set_alt+0x6c/0xef0 kasan_report+0xe0/0x110 ? tcm_delayed_set_alt+0x6c/0xef0 tcm_delayed_set_alt+0x6c/0xef0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? process_one_work+0x4cb/0xb90 ? rcu_is_watching+0x20/0x50 ? tcm_delayed_set_alt+0x9/0xef0 process_one_work+0x4d7/0xb90 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __list_add_valid_or_report+0x37/0xf0 ? __pfx_tcm_delayed_set_alt+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x2d8/0x570 ? __pfx_worker_thread+0x10/0x10 kthread+0x1ad/0x1f0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3c9/0x540 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x2e9/0x730 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 544: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0x8f/0xa0 tcm_alloc+0x68/0x180 usb_get_function+0x36/0x60 config_usb_cfg_link+0x125/0x1b0 configfs_symlink+0x322/0x890 vfs_symlink+0xc2/0x270 filename_symlinkat+0x295/0x2f0 __x64_sys_symlinkat+0x62/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 661: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x60 __kasan_slab_free+0x43/0x70 kfree+0x2f9/0x530 config_usb_cfg_unlink+0x173/0x1e0 configfs_unlink+0x1fa/0x340 vfs_unlink+0x15c/0x510 filename_unlinkat+0x2ba/0x450 __x64_sys_unlinkat+0x63/0x90 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-68342 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: avoid putting unrelated P2P peer on socket release ovpn_peer_release_p2p() is called when an OVPN UDP socket is being destroyed. It checks the currently published P2P peer and releases it only if that peer still uses the socket being destroyed. A peer replacement can publish a new peer before the old UDP socket is destroyed. When the old socket destruction path runs afterwards, ovpn_peer_release_p2p() observes the new peer through ovpn->peer. Since the new peer uses a different socket, the function takes the socket mismatch branch. That branch still calls ovpn_peer_put(peer). At this point, however, peer is the currently published replacement peer, not the peer associated with the socket being destroyed. Dropping its reference can free it while ovpn->peer still points to it, leading to later use-after-free accesses from the peer and socket cleanup paths. KASAN reports this as a slab-use-after-free on the kmalloc-1k ovpn_peer object. In the reproducer, the object is allocated from ovpn_peer_new() via ovpn_nl_peer_new_doit(), and freed through ovpn_peer_release_rcu() from RCU callback processing. Observed access sites include ovpn_peer_remove(), ovpn_socket_release(), ovpn_nl_peer_del_notify(), and unlock_ovpn(). Fix this by returning from the socket mismatch branch without putting the peer. | ||||
| CVE-2026-68346 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: hda: cs35l41: validate and free ACPI mute object cs35l41_get_acpi_mute_state() evaluates a _DSM method to get the ACPI mute state and reads the first byte from the returned object. However, the returned ACPI object is owned by the caller and is never freed after use, so each successful query leaks the _DSM result object. The code also assumes that the returned object is a buffer with at least one byte. A malformed firmware response can return a different object type or an empty buffer, and the direct ret->buffer.pointer dereference can then access an invalid pointer. Use the typed _DSM helper, validate that the returned buffer contains at least one byte, and free the ACPI object after reading it. | ||||
| CVE-2026-68364 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: Fix ISM dc_lock deadlock during suspend [Why] System hang observed during suspend/resume while video is playing. amdgpu_dm_ism_disable() is called under dc_lock and waits for ISM delayed work via disable_delayed_work_sync(). The work handlers themselves take dc_lock, producing an ABBA deadlock when a worker is in flight at suspend time. [How] Split the disable path into two phases with opposite locking contracts: 1. amdgpu_dm_ism_disable() -- quiesces workers, must NOT hold dc_lock. 2. amdgpu_dm_ism_force_full_power() (new) -- drives the ISM FSM back to FULL_POWER_RUNNING, must hold dc_lock. | ||||
| CVE-2026-68372 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: core: port: Deattach Type-C connector on component unbind connector_unbind() is the mirror of connector_bind(), but it is missing the symmetric call to typec_deattach() that connector_bind() makes via: if (port_dev->child) typec_attach(port_dev->connector, &port_dev->child->dev); When a Thunderbolt dock is unplugged, two teardown paths race: 1. The component framework calls connector_unbind() first, which sets port_dev->connector = NULL without calling typec_deattach(). This leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at the USB device that is about to be freed. 2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...), but port_dev->connector is already NULL, so the call is a no-op and port->usb2_dev is never cleared. 3. Concurrently, UCSI detects a PD partner-disconnect event and calls typec_unregister_partner(), which reads port->usb2_dev (now a dangling pointer to freed memory) and passes it to typec_partner_unlink_device() -> sysfs_remove_link() -> dev_name() on the freed device, corrupting the typec/UCSI partner state. This corruption leaves the Thunderbolt tunnel in an inconsistent state on the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails to enumerate: AER fires a slot reset while the igc driver is still initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits igc_rd32 on an already-detached device: igc 0000:2e:00.0 eth0: PCIe link lost, device now detached igc: Failed to read reg 0x0! WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005 igc_rd32+0xa4/0xc0 [igc] Call Trace: igc_disable_pcie_master+0x16/0xa0 [igc] igc_reset_hw_base+0x14/0x170 [igc] igc_reset+0x63/0x110 [igc] igc_io_slot_reset+0x9e/0xd0 [igc] report_slot_reset+0x5d/0xc0 pcie_do_recovery+0x209/0x400 aer_isr_one_error_type+0x235/0x430 aer_isr+0x4e/0x80 irq_thread+0xf4/0x1f0 4. UCSI later handles the PD partner-disconnect and calls typec_unregister_partner(), which still sees the stale port->usb2_dev and tries to remove its sysfs link a second time: kernfs: can not remove 'typec', no directory WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0 Workqueue: events ucsi_handle_connector_change [typec_ucsi] Call Trace: sysfs_remove_link+0x19/0x50 typec_unregister_partner+0x6e/0x120 [typec] ucsi_unregister_partner+0x107/0x150 [typec_ucsi] ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi] process_one_work+0x18e/0x3e0 worker_thread+0x2e3/0x420 kthread+0x10a/0x230 ret_from_fork+0x121/0x140 ret_from_fork_asm+0x1a/0x30 With worse timing the same stale pointer is dereferenced after the backing memory is freed, turning the warning into a use-after-free. Fix the asymmetry: call typec_deattach() before clearing port_dev->connector, matching what connector_bind() does on the bind side. typec_partner_deattach() is already protected by port->partner_link_lock, so it serialises safely with the concurrent typec_unregister_partner() path. | ||||
| CVE-2026-68435 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix address space mismatch in kexec command line lookup When searching the loaded segments for the "kexec" command line marker, the kexec_load(2) path (file_mode == 0) passes the user-space segment buffer straight to strncmp() through a bogus (char __user *) cast. This dereferences a user pointer in kernel context, which is wrong and is flagged by sparse: arch/loongarch/kernel/machine_kexec.c:84:51: sparse: incorrect type in argument 2 (different address spaces) @@ expected char const * @@ got char [noderef] __user * Here copy the marker-sized prefix of each segment into a small on-stack buffer with copy_from_user() before comparing, and skip segments that fault. The subsequent copy_from_user() that stages the full command line into the safe area is left unchanged. | ||||
| CVE-2022-49126 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpi3mr: Fix memory leaks Fix memory leaks related to operational reply queue's memory segments which are not getting freed while unloading the driver. | ||||
| CVE-2022-49112 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mt76: fix monitor mode crash with sdio driver mt7921s driver may receive frames with fragment buffers. If there is a CTS packet received in monitor mode, the payload is 10 bytes only and need 6 bytes header padding after RXD buffer. However, only RXD in the first linear buffer, if we pull buffer size RXD-size+6 bytes with skb_pull(), that would trigger "BUG_ON(skb->len < skb->data_len)" in __skb_pull(). To avoid the nonlinear buffer issue, enlarge the RXD size from 128 to 256 to make sure all MCU operation in linear buffer. [ 52.007562] kernel BUG at include/linux/skbuff.h:2313! [ 52.007578] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 52.007987] pc : skb_pull+0x48/0x4c [ 52.008015] lr : mt7921_queue_rx_skb+0x494/0x890 [mt7921_common] [ 52.008361] Call trace: [ 52.008377] skb_pull+0x48/0x4c [ 52.008400] mt76s_net_worker+0x134/0x1b0 [mt76_sdio 35339a92c6eb7d4bbcc806a1d22f56365565135c] [ 52.008431] __mt76_worker_fn+0xe8/0x170 [mt76 ef716597d11a77150bc07e3fdd68eeb0f9b56917] [ 52.008449] kthread+0x148/0x3ac [ 52.008466] ret_from_fork+0x10/0x30 | ||||
| CVE-2022-49105 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: wfx: fix an error handling in wfx_init_common() One error handler of wfx_init_common() return without calling ieee80211_free_hw(hw), which may result in memory leak. And I add one err label to unify the error handler, which is useful for the subsequent changes. | ||||
| CVE-2026-68437 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fit paired fragment job in the correct CCCB For geometry jobs with a paired fragment job, at the moment, the DRM scheduler's prepare_job() callback: - checks for internal (driver) dependencies for the geometry job; - calls into pvr_queue_get_paired_frag_job_dep() to check for external dependencies for the fragment job (the two jobs are submitted together but the common scheduler code doesn't know about it, so this needs to be done at this point in time); - calls into the prepare_job() callback again, but for the fragment job, to check its internal dependencies as well, passing the fragment job's drm_sched_job and the geometry job's drm_sched_entity / pvr_queue. The problem with the last step is that pvr_queue_prepare_job() doesn't always take the mismatched fragment job and geometry queue into account, in particular when checking whether there is space for the fragment command to be submitted, so the code ends up checking for space in the geometry (i.e. wrong) CCCB. The rest of the nested prepare_job() callback happens to work fine at the moment as the other internal dependencies are not relevant for a paired fragment job. Move the initialisation of a paired fragment job's done fence and CCCB fence to pvr_queue_get_paired_frag_job_dep(), inferring the correct queue from the fragment job itself. This fixes cases where prepare_job() wrongly assumed that there was enough space for a paired fragment job in its own CCCB, unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 552.421075] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#2: kworker/u16:5/63 [ 552.421230] Modules linked in: [ 552.421592] CPU: 2 UID: 0 PID: 63 Comm: kworker/u16:5 Tainted: G W 7.0.0-rc2-gc5d053e4dccb #39 PREEMPT [ 552.421625] Tainted: [W]=WARN [ 552.421637] Hardware name: Texas Instruments AM625 SK (DT) [ 552.421655] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 552.421744] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 552.421766] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 552.421850] lr : pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.421923] sp : ffff800084c47650 [ 552.421936] x29: ffff800084c47740 x28: 0000000000000df8 x27: ffff800088a77000 [ 552.421979] x26: 0000000000000030 x25: ffff800084c47680 x24: 0000000000001000 [ 552.422017] x23: ffff800084c47820 x22: 1ffff00010988ecc x21: 0000000000000008 [ 552.422055] x20: 0000000000000208 x19: ffff000006ad5a88 x18: 0000000000000000 [ 552.422093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 552.422130] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 552.422167] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 552.422204] x8 : 00000000f2f2f200 x7 : ffff700010988ecc x6 : 0000000000000008 [ 552.422241] x5 : 0000000000000000 x4 : 1ffff0001114ee00 x3 : 0000000000000000 [ 552.422278] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 552.422316] Call trace: [ 552.422330] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 552.422411] pvr_queue_submit_job_to_cccb+0x57c/0xa74 [powervr] [ 552.422486] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 552.422562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 552.422623] process_one_work+0x520/0x1288 [ 552.422657] worker_thread+0x3f0/0xb3c [ 552.422679] kthread+0x334/0x3d8 [ 552.422706] ret_from_fork+0x10/0x20 | ||||
| CVE-2026-68412 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: Fix an error handling path in cfg80211_wext_siwscan() If the test against IEEE80211_MAX_SSID_LEN fails, then 'creq' leaks. Use the existing error handling path to fix it. | ||||
| CVE-2026-68421 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 0.0 Low |
| In the Linux kernel, the following vulnerability has been resolved: sched_ext: Don't warn on core-sched forced idle in put_prev_task_scx() put_prev_task_scx() warns when a runnable task drops to a lower sched_class without SCX_OPS_ENQ_LAST, on the assumption that balance_one() would have kept it running. Core scheduling breaks that: a forced-idle SMT sibling reschedules through the core_pick fast path in pick_next_task(), which skips pick_task_scx() and thus balance_one(), so a runnable task can drop to idle with ENQ_LAST unset. Gate the warning on sched_cpu_cookie_match(): a cookie mismatch means core scheduling forced the idle, while a match (or core scheduling off) still catches a genuine missing-ENQ_LAST drop. | ||||
| CVE-2026-3482 | 3 Ibm, Linux, Microsoft | 5 Aix, Sterling B2b Integrator, Sterling File Gateway and 2 more | 2026-08-12 | 5.3 Medium |
| IBM Sterling B2B Integrator and IBM Sterling File Gateway 6.2.0.0 through 6.2.0.5_2, 6.2.1.0 through 6.2.1.1_2, and 6.2.2.0 through 6.2.2.0_1 could allow an unauthenticated user to read sensitive information by bypassing authentication through a specially crafted HTTP request. | ||||
| CVE-2026-68416 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: fix double free and WARN_ON in add_mtd_device() error paths When device_register() or mtd_nvmem_add() fails inside add_mtd_device() for a partition, the error handling triggers mtd_release() via put_device() or device_unregister(). mtd_release() calls release_mtd_partition() which frees the mtd_info structure. However, callers such as mtd_add_partition() and add_mtd_partitions() also call free_partition() in their error paths, resulting in a double free. Additionally, release_mtd_partition() hits WARN_ON(!list_empty( &mtd->part.node)) because the partition node is still linked in the parent's partitions list when the release callback fires from the add_mtd_device() error path. Fix this by overriding dev->type and dev->release before put_device() in the error paths, so that device_release() invokes a no-op function instead of mtd_release(). For the mtd_nvmem_add() failure case, device_unregister() is replaced with device_del() to separate the device removal from the final kobject reference drop, allowing the override to take effect before put_device() is called. The callers' error paths (list_del + free_partition) remain the sole owners of mtd_info lifetime on add_mtd_device() failure, which is the expected contract. The normal partition teardown path is not affected: del_mtd_device() goes through kref_put() -> mtd_device_release() -> device_unregister() with dev->type still set to &mtd_devtype, so mtd_release() -> release_mtd_partition() continues to work correctly for the regular removal case. | ||||
| CVE-2026-68423 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: virt_concat: fix use-after-free in mtd_virt_concat_destroy() mtd_concat_destroy() frees item->concat so calling mtd_virt_concat_put_mtd_devices(item->concat) after that leads to a use-after-free. Fix it by moving mtd_virt_concat_put_mtd_devices() before mtd_concat_destroy(). | ||||
| CVE-2026-64230 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: regulator: tps65219: fix irq_data.rdev not being assigned Commit 64a6b577490c ("regulator: tps65219: Remove debugging helper function") removed the tps65219_get_rdev_by_name() helper along with the irq_data.rdev assignment that depended on it. This left irq_data.rdev uninitialized for all IRQs, causing undefined behavior when regulator_notifier_call_chain() is called from the IRQ handler: Internal error: Oops: 0000000096000004 pc : regulator_notifier_call_chain lr : tps65219_regulator_irq_handler Call trace: regulator_notifier_call_chain tps65219_regulator_irq_handler handle_nested_irq regmap_irq_thread irq_thread_fn irq_thread kthread ret_from_fork Instead of restoring a dedicated lookup array, restructure the probe function to combine regulator registration with IRQ registration in the same loop. This way the rdev returned by devm_regulator_register() is naturally available for assigning to irq_data.rdev without any auxiliary data structure. Non-regulator IRQs (SENSOR, TIMEOUT) that don't correspond to any registered regulator are registered with rdev=NULL, and the IRQ handler is protected with a NULL check to avoid crashing. | ||||
| CVE-2022-50073 | 1 Linux | 1 Linux Kernel | 2026-08-12 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: tap: NULL pointer derefence in dev_parse_header_protocol when skb->dev is null Fixes a NULL pointer derefence bug triggered from tap driver. When tap_get_user calls virtio_net_hdr_to_skb the skb->dev is null (in tap.c skb->dev is set after the call to virtio_net_hdr_to_skb) virtio_net_hdr_to_skb calls dev_parse_header_protocol which needs skb->dev field to be valid. The line that trigers the bug is in dev_parse_header_protocol (dev is at offset 0x10 from skb and is stored in RAX register) if (!dev->header_ops || !dev->header_ops->parse_protocol) 22e1: mov 0x10(%rbx),%rax 22e5: mov 0x230(%rax),%rax Setting skb->dev before the call in tap.c fixes the issue. BUG: kernel NULL pointer dereference, address: 0000000000000230 RIP: 0010:virtio_net_hdr_to_skb.constprop.0+0x335/0x410 [tap] Code: c0 0f 85 b7 fd ff ff eb d4 41 39 c6 77 cf 29 c6 48 89 df 44 01 f6 e8 7a 79 83 c1 48 85 c0 0f 85 d9 fd ff ff eb b7 48 8b 43 10 <48> 8b 80 30 02 00 00 48 85 c0 74 55 48 8b 40 28 48 85 c0 74 4c 48 RSP: 0018:ffffc90005c27c38 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888298f25300 RCX: 0000000000000010 RDX: 0000000000000005 RSI: ffffc90005c27cb6 RDI: ffff888298f25300 RBP: ffffc90005c27c80 R08: 00000000ffffffea R09: 00000000000007e8 R10: ffff88858ec77458 R11: 0000000000000000 R12: 0000000000000001 R13: 0000000000000014 R14: ffffc90005c27e08 R15: ffffc90005c27cb6 FS: 0000000000000000(0000) GS:ffff88858ec40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000230 CR3: 0000000281408006 CR4: 00000000003706e0 Call Trace: tap_get_user+0x3f1/0x540 [tap] tap_sendmsg+0x56/0x362 [tap] ? get_tx_bufs+0xc2/0x1e0 [vhost_net] handle_tx_copy+0x114/0x670 [vhost_net] handle_tx+0xb0/0xe0 [vhost_net] handle_tx_kick+0x15/0x20 [vhost_net] vhost_worker+0x7b/0xc0 [vhost] ? vhost_vring_call_reset+0x40/0x40 [vhost] kthread+0xfa/0x120 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x1f/0x30 | ||||