Export limit exceeded: 380217 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 93819 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (93819 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72340 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: microchip: vcap: fix races on the shared Super VCAP block The VCAP instances on a chip are not independent, yet they are locked independently. On sparx5 and lan969x the IS0 and IS2 instances are backed by the same Super VCAP hardware block and share its cache and command registers: every access drives the shared VCAP_SUPER_CTRL register and moves data through the shared cache registers. Accessing one instance therefore races with accessing another. The per-instance admin->lock cannot prevent this, as each instance takes a different lock. The locking issue is mostly disguised by the fact that the core usage of the vcap api runs under rtnl. However, the full rule dump in debugfs decodes rules straight from hardware (a READ command followed by a cache read) and runs outside rtnl, so it races a concurrent tc-flower rule write to another Super VCAP instance. Besides corrupting the dump, the read repopulates the shared cache between the writers cache fill and its write command, so the writer commits the wrong data and corrupts the hardware entry. Introduce vcap_lock() and vcap_unlock() helpers and route every rule lock site in the VCAP API and its debugfs code through them. Replace the per-instance admin->lock with a single mutex in struct vcap_control that serializes access to all instances. The helpers reach it through a new admin->vctrl back-pointer, and the clients initialise and destroy the control lock instead of a per-instance one. No path holds more than one instance lock, so collapsing them onto a single mutex cannot self-deadlock. | ||||
| CVE-2026-72342 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Fix HV VHCA stats agent registration race mlx5e_hv_vhca_stats_create() registers the stats agent through mlx5_hv_vhca_agent_create(). The helper publishes the agent in hv_vhca->agents[type] under agents_lock and immediately schedules an asynchronous control invalidation on the HV VHCA workqueue before returning to mlx5e. The asynchronous invalidation invokes the control agent's invalidate callback, which reads the hypervisor control block and forwards the command to mlx5e_hv_vhca_stats_control(). That callback may either: - call cancel_delayed_work_sync(&priv->stats_agent.work), or - call queue_delayed_work(priv->wq, &sagent->work, sagent->delay). However, the delayed_work and priv->stats_agent.agent are only initialized after mlx5_hv_vhca_agent_create() returns to mlx5e: agent = mlx5_hv_vhca_agent_create(...); /* publish + invalidate */ ... priv->stats_agent.agent = agent; /* too late */ INIT_DELAYED_WORK(&priv->stats_agent.work, ...); /* too late */ If the asynchronous control path runs before the two assignments above, it can: - Operate on an uninitialized delayed_work whose timer.function is NULL. queue_delayed_work() calls add_timer() unconditionally, so when the timer expires the timer softirq invokes a NULL function pointer. - Re-initialize the timer later through INIT_DELAYED_WORK() while the timer is already enqueued in the timer wheel, corrupting the hlist (entry.pprev cleared while the previous bucket node still points at this entry). - When the worker eventually runs, mlx5e_hv_vhca_stats_work() reads sagent->agent (NULL) and dereferences it inside mlx5_hv_vhca_agent_write(). Fix this by: - Initializing priv->stats_agent.work before invoking mlx5_hv_vhca_agent_create(), so the work is always in a valid state when the control callback observes it. - Adding a struct mlx5_hv_vhca_agent **ctx_update out-parameter to mlx5_hv_vhca_agent_create(). The helper writes the agent pointer to *ctx_update before publishing into hv_vhca->agents[] and triggering the agents_update flow, so any callback subsequently invoked from that flow already sees a valid priv->stats_agent.agent. This avoids having the control callback participate in agent initialization. While at it, access priv->stats_agent.agent with READ_ONCE()/WRITE_ONCE() for the cross-CPU access with the worker, and clear priv->stats_agent.buf on the agent_create() failure path. | ||||
| CVE-2026-72389 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bridge: stp: Fix a potential use-after-free when deleting a bridge The three STP timers are not supposed to be armed while the bridge is administratively down. They are synchronously deactivated when the bridge is put administratively down and the various call sites check for 'IFF_UP' before arming them. This check is missing from br_topology_change_detection() and it is possible to engineer a situation in which the topology change timer is armed while the bridge is administratively down, resulting in a use-after-free [1] when the bridge is deleted. Fix by adding the missing check and for good measures synchronously shutdown the three timers when the bridge is deleted. [1] ODEBUG: free active (active state 0) object: ffff88811662b9b0 object type: timer_list hint: br_topology_change_timer_expired (net/bridge/br_stp_timer.c:120) WARNING: lib/debugobjects.c:629 at debug_print_object+0x1bc/0x450, CPU#9: ip/359 | ||||
| CVE-2026-64145 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: wilc1000: fix dma_buffer leak on bus acquire failure wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at the top of the function and uses a 'fail:' label to free it via kfree(dma_buffer) on error. All later error paths correctly use 'goto fail' to route through this cleanup. However, the early failure path after the first acquire_bus() call uses a bare 'return ret;', which leaks dma_buffer whenever the bus acquire fails. Replace the early return with goto fail so the existing cleanup path runs. Found via a custom Coccinelle semantic patch hunting for kmalloc'd locals leaked on early-return error paths in driver firmware-download code. | ||||
| CVE-2026-62761 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-08-17 | 7.8 High |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-62776 | 1 Microsoft | 14 Windows 10 1607, Windows 10 1809, Windows Server 2012 and 11 more | 2026-08-17 | 7.8 High |
| Improper link resolution before file access ('link following') in Windows DHCP Server allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-63522 | 1 Microsoft | 1 Azure Sql Database | 2026-08-17 | 7.8 High |
| Incorrect permission assignment for critical resource in Azure SQL Database allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-72029 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: iosm: bound device offsets in the MUX downlink decoder mux_dl_adb_decode() walks a chain of aggregated datagram tables using offsets and lengths taken from the modem. first_table_index, next_table_index, table_length, datagram_index and datagram_length are all device supplied le values. Only first_table_index was checked, and only for being non zero. The decoder then formed adth = block + adth_index and read the table header and the datagram entries with no bound against the received skb. A modem that reports an index or a length past the downlink buffer makes the decoder read out of bounds. The buffer is IPC_MEM_MAX_DL_MUX_LITE_BUF_SIZE and skb->len is at most that, so skb->len is the real limit, but none of these in band offsets were checked against it. The table chain is also followed with no forward progress check. The loop takes the next table from adth->next_table_index and stops only when that reaches zero. A modem can stage two tables that point at each other, so the loop never ends. It runs in softirq and clones the skb on every pass. Validate every device offset and length against skb->len before use. The block header must fit. Each table header, on entry and after every next_table_index, must lie inside the skb. The datagram table must fit. Each datagram index and length must stay inside the skb. The header padding must not exceed the datagram length so the receive length does not wrap. Require each next_table_index to move forward so the chain cannot cycle. This was reproduced under KASAN as a slab out of bounds read on a normal downlink receive once the iosm net device is up. | ||||
| CVE-2026-72036 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected. | ||||
| CVE-2026-72053 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ipip: require CAP_NET_ADMIN in the device netns for changelink ipip_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate ipip_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72054 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_vti: require CAP_NET_ADMIN in the device netns for changelink vti_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72055 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip6_vti: require CAP_NET_ADMIN in the device netns for changelink vti6_changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Gate vti6_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72057 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: preserve tc_skb_cb across defragmentation tcf_ct_handle_fragments() calls nf_ct_handle_fragments() without saving and restoring skb->cb. The defrag helper clears IPCB/IP6CB, which aliases the tc_skb_cb/qdisc_skb_cb control buffer. Fragmented traffic through act_ct therefore loses qdisc metadata such as pkt_segs and can trigger WARN_ON_ONCE() in qdisc_pkt_segs() when panic_on_warn is enabled. Save and restore the full tc_skb_cb around nf_ct_handle_fragments(), matching the pattern used by ovs_ct_handle_fragments(). | ||||
| CVE-2026-46345 | 1 Oscal-compass | 1 Compliance-trestle | 2026-08-17 | 8.4 High |
| compliance-trestle is a tooling platform for managing compliance as code. Prior to versions 3.12.2 and 4.0.3, the `-o/--output` argument in `trestle author jinja` allows writing files outside the intended workspace. The application does not properly validate, `../`, `..\`, or absolute paths. This allows arbitrary file write to attacker-controlled locations. Versions 3.12.3 and 4.0.3 patch the issue. | ||||
| CVE-2026-64245 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: modedb: fix a possible UAF in fb_find_mode() If mode_option is NULL, it is assigned from mode_option_buf: if (!mode_option) { fb_get_options(NULL, &mode_option_buf); mode_option = mode_option_buf; } Later, name is assigned from mode_option: const char *name = mode_option; However, mode_option_buf is freed before name is no longer used: kfree(mode_option_buf); while name is still accessed by: if ((name_matches(db[i], name, namelen) || Since name aliases mode_option_buf, this may result in a use-after-free. Fix this by extending the lifetime of mode_option_buf until the end of the function by using scope-based resource management for cleanup. | ||||
| CVE-2026-75051 | 1 Jetbrains | 1 Youtrack | 2026-08-17 | 8.1 High |
| In JetBrains YouTrack before 2026.2.17917 unauthorised project transfer between organisations was possible | ||||
| CVE-2026-73682 | 1 Semaphoreui | 1 Semaphore | 2026-08-17 | 8.8 High |
| Semaphore versions prior to 2.18.20 contain an OS command injection (argument injection) vulnerability in the repository git_url handling that allows authenticated users holding the Manager or Owner role on any project to achieve remote code execution on the Semaphore server host. Attackers can craft a malicious git_url value using git's --upload-pack= option to inject and execute arbitrary shell commands when the server processes repository operations using the default cmd_git client. | ||||
| CVE-2026-62982 | 1 Nicolargo | 1 Glances | 2026-08-17 | 8.8 High |
| Glances is an open-source system cross-platform monitoring tool. From 4.5.2 until 4.5.6, _sanitize_mustache_dict() in glances/actions.py skips nested list and dictionary strings such as process cmdline values, allowing pipe characters to survive chevron.render() and be executed by secure_popen() through administrator-configured action templates. This issue is fixed in 4.5.6. | ||||
| CVE-2026-59893 | 2026-08-17 | 7.5 High | ||
| sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, SQL_REGEX in sqlparse/keywords.py and the per-position loop in sqlparse/lexer.py repeatedly scan unmatched dollar-quoted literal and multiline-comment delimiters, causing quadratic CPU consumption through sqlparse.parse(), sqlparse.format(), and sqlparse.split(). This issue is fixed in version 0.6.0. | ||||
| CVE-2026-72093 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap() When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma) which internally calls drm_gem_vm_close() → drm_gem_object_put(), releasing the GEM object reference acquired at the start of the function. However, the close_vma label then falls through to put_obj, which calls drm_gem_object_put() a second time on the same object. If the first put releases the last reference, the object is freed and the second put accesses freed memory, causing a use-after-free. Fix by returning directly from close_vma instead of falling through to put_obj, since the close handler already performs all necessary cleanup including the object put. | ||||