Export limit exceeded: 14902 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14902 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68276 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx: fix cleaner shader IB buffer overflow The cleaner shader sysfs path allocates a 16-dword (64 byte) IB but incorrectly fills (align_mask + 1) dwords. On GFX rings align_mask is 0xff, so the loop wrote 256 dwords into a 64-byte buffer, causing a kernel page fault. The IB only needs to be a minimal NOP shell to schedule the job; the cleaner shader itself is emitted on the ring via emit_cleaner_shader(). Fill 16 dwords to match the allocation. v2: Use ib_size_dw variable (Lijo) (cherry picked from commit bf21af331ebf72d0935fd70c73192414a422c03a) | ||||
| CVE-2026-68320 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix auth_chunk_list capacity check in sctp_auth_ep_add_chunkid sctp_auth_ep_add_chunkid() uses SCTP_NUM_CHUNK_TYPES (20) as the capacity limit for ep->auth_chunk_list, allowing it to hold up to 20 chunk entries (param_hdr.length up to 24). However, the copy destination asoc->c.auth_chunks in struct sctp_cookie is only SCTP_AUTH_MAX_CHUNKS (16) entries (20 bytes). When more than 16 chunks are added, sctp_association_init() memcpy overflows the destination by up to 4 bytes. Fix by using SCTP_AUTH_MAX_CHUNKS as the capacity limit, matching the destination capacity. | ||||
| CVE-2026-68145 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: iomap: fix out-of-bounds bitmap_set() with zero-length range ifs_set_range_dirty() and ifs_set_range_uptodate() compute last_blk as (off + len - 1) >> i_blkbits. When off is 0 and len is 0, the unsigned subtraction underflows to SIZE_MAX, producing a huge last_blk and nr_blks value that causes bitmap_set() to write far beyond the ifs->state allocation. Regarding ifs_set_range_uptodate(), it is temporarily safe because len cannot be passed in as 0. However, for ifs_set_range_dirty() this is reachable from __iomap_write_end(): when copy_folio_from_iter_atomic() returns 0 (e.g. user buffer fault) and the folio is already uptodate, the guard at the top of __iomap_write_end() does not trigger because !folio_test_uptodate() is false, and iomap_set_range_dirty() is called with copied == 0. Add a !len guard to both functions before the computation, so that a zero-length range is a no-op. | ||||
| CVE-2026-68287 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drop_monitor: fix size calculations for 64-bit attributes net_dm_packet_report_fill() and net_dm_hw_packet_report_fill() use nla_put_u64_64bit() to append 64-bit attributes (NET_DM_ATTR_PC and NET_DM_ATTR_TIMESTAMP). On 32-bit architectures without CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS, nla_put_u64_64bit() may append a 4-byte NET_DM_ATTR_PAD attribute for 64-bit alignment. However, net_dm_packet_report_size() and net_dm_hw_packet_report_size() used nla_total_size(sizeof(u64)) instead of nla_total_size_64bit(sizeof(u64)), budgeting 12 bytes instead of up to 16 bytes. This under-estimation of SKB size can lead to an skb_over_panic() when __nla_reserve() or skb_put() is subsequently called. Fix this by using nla_total_size_64bit(sizeof(u64)) in both size calculations. | ||||
| CVE-2026-68262 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 7.3 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Fix user array stride in pvr_set_uobj_array() pvr_set_uobj_array() copies an array of kernel objects to a userspace array whose element size is described by out->stride. When out->stride is different from the kernel object size, the slow path advances the userspace pointer by the kernel object size and the kernel pointer by the userspace stride. This reverses the intended layout. For larger userspace strides, later copies read from the wrong kernel addresses. For smaller userspace strides, later copies are written at the wrong userspace offsets. The padding clear is also done only for the first element instead of the padding area for each element. Advance the userspace pointer by out->stride and the kernel pointer by obj_size, and clear per-element padding while the current userspace pointer is still available. | ||||
| CVE-2026-68265 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vm: Fix BO prefetch with CONSULT_MEM_ADVISE_PREF_LOC When prefetch region is DRM_XE_CONSULT_MEM_ADVISE_PREF_LOC for a BO VMA, the code used it as an index into region_to_mem_type[], causing an out-of-bounds access since the value is -1. Resolve the preferred location for BO VMAs directly: local VRAM on dGFX (using the BO's tile placement) or system memory on iGPU. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: -Fix null dereference (cherry picked from commit d9a4906ac03be9f6ed3f3b45c56c866b867fd75b) | ||||
| CVE-2026-68274 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/guc: Fix buffer overflow in steered register list allocation The size calculation for the steered register extarray uses only the geometry DSS mask (g_dss_mask) to determine the number of entries to allocate: total = bitmap_weight(gt->fuse_topo.g_dss_mask, ...) * steer_reg_num; However, the filling loop uses for_each_dss_steering(), which iterates over for_each_dss(), defined as the union of g_dss_mask and c_dss_mask (geometry + compute DSS). On platforms with compute-only DSS bits, the loop writes past the allocated buffer, corrupting adjacent slab objects. This manifests as list_del corruption and SLUB redzone overwrites during drm_managed_release on device unbind, since the overflow corrupts the drmres list_head of neighboring allocations. Fix by computing the allocation size using the union of both DSS masks, matching the iteration pattern of for_each_dss_steering(). -- v2: - use bitmap_weighted_or() (Zhanjun) (cherry picked from commit 0a78a44f4901aa6c9263e66be7fce02282f1109f) | ||||
| CVE-2026-68264 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pt: Reset current_op in xe_pt_update_ops_init() xe_pt_update_ops_init() fails to reset current_op to 0. On the vm_bind path, ops_execute() calls xe_pt_update_ops_prepare() inside the xe_validation_guard() / drm_exec_until_all_locked() loop. When that loop retries due to lock contention or OOM eviction (drm_exec_retry_on_contention() / xe_validation_retry_on_oom()), xe_pt_update_ops_prepare() runs again on the same vops, and each call to bind_op_prepare() increments current_op without resetting it. After N retries current_op exceeds the array size allocated by xe_vma_ops_alloc(), causing an out-of-bounds write into SLUB-poisoned memory and a subsequent UAF crash in xe_migrate_update_pgtables_cpu() when reading the corrupted pt_op->bind. Also reset needs_svm_lock and needs_invalidation which are derived in the same prepare pass and would otherwise cause wrong migrate ops selection and redundant TLB invalidation on retry. Fix this by resetting current_op, needs_svm_lock and needs_invalidation in xe_pt_update_ops_init(). v2 (Matt): - Add details in commit message. - Add Fixes tag and Cc to stable@vger.kernel.org (cherry picked from commit 046045543e530605c441063535e7dca0075369a6) | ||||
| CVE-2026-68124 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mctp: serial: handle zero-length frames to prevent rx buffer overflow The MCTP serial receive state machine reads a frame length byte in mctp_serial_push_header() case 2 and validates it upper-bound-only: if (c > MCTP_SERIAL_FRAME_MTU) { dev->rxstate = STATE_ERR; } else { dev->rxlen = c; dev->rxpos = 0; dev->rxstate = STATE_DATA; ... } A length of zero passes this check, so rxlen is set to 0 and the state machine advances to STATE_DATA. In mctp_serial_push() STATE_DATA, the incoming byte is stored and rxpos incremented before the terminator is dev->rxbuf[dev->rxpos] = c; dev->rxpos++; dev->rxstate = STATE_DATA; if (dev->rxpos == dev->rxlen) { dev->rxpos = 0; dev->rxstate = STATE_TRAILER; } With rxlen == 0 the "rxpos == rxlen" terminator can never fire (rxpos is already 1 on the first data byte), so subsequent bytes are written past the end of the fixed 74-byte rxbuf, which is the last member of the netdev private area. Every following data byte is an attacker-controlled 1-byte out-of-bounds heap write, and the overflow continues until a frame (0x7e) or escape byte resets the parser -- effectively unbounded. Reaching this requires CAP_NET_ADMIN to attach the N_MCTP line discipline and bring the resulting mctpserialN netdev up, after which the bytes arrive via the tty receive path. Route a zero-length frame straight to STATE_TRAILER instead of STATE_DATA. The trailer/framing bytes are still consumed, and the frame resolves to a zero-length skb that the MCTP core rejects; the parser never enters STATE_DATA with rxlen == 0, so the out-of-bounds write can no longer occur. KASAN, on a frame of 0x7e 0x01 0x00 followed by data bytes (before this change): UBSAN: array-index-out-of-bounds in drivers/net/mctp/mctp-serial.c:370 index 74 is out of range for type 'u8 [74]' BUG: KASAN: slab-out-of-bounds in mctp_serial_tty_receive_buf Write of size 1 at addr ... by task kworker/u16:0 mctp_serial_tty_receive_buf tty_ldisc_receive_buf flush_to_ldisc Allocated by task 152: alloc_netdev_mqs mctp_serial_open v2: route zero-length frames to STATE_TRAILER instead of STATE_ERR so the trailer/framing bytes are still consumed (Jeremy Kerr). Found by 0sec automated security-research tooling (https://0sec.ai). | ||||
| CVE-2026-68125 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: reject frames shorter than the authentication tag llsec_do_decrypt_auth() computes the associated-data length for the AEAD request as assoclen += datalen - authlen; where datalen is the number of bytes after the MAC header and authlen (4, 8 or 16) is the length of the authentication tag. Nothing verifies that the frame actually carries at least authlen payload bytes. A secured frame whose payload is shorter than the tag makes datalen - authlen negative; assoclen is then passed to aead_request_set_ad() as an unsigned value close to 4 GiB, so crypto_aead_decrypt() walks far off the end of the scatterlist that only spans the real frame. The frame is fully attacker-controlled and reaches this path from any IEEE 802.15.4 peer in radio range. Reject frames whose payload is shorter than the authentication tag before the subtraction. Dynamically reproduced on a KASAN kernel as a general-protection-fault in the AEAD scatterwalk, and the fix confirmed. | ||||
| CVE-2026-68128 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ice: reject out-of-range ptype in ice_parser_profile_init set_bit(rslt->ptype, prof->ptypes) operates on a DECLARE_BITMAP of ICE_FLOW_PTYPE_MAX (1024) bits. Nothing prevents a malicious VF from providing ptype >= 1024 through VIRTCHNL, resulting in a write past the end of the bitmap and a kernel page fault. Reproduced with a custom kernel module injecting a crafted VIRTCHNL_OP_ADD_RSS_CFG on E810-C QSFP (8086:1592), FW 4.91 0x800214af 1.3909.0, ICE COMMS DDP 1.3.53.0, kernel 7.1.0-rc1. crash_parser: ice_parser_profile_init @ ffffffffc0d61b60 crash_parser: setting ptype=0xffff (max valid=1023) crash_parser: calling ice_parser_profile_init -- expect OOB crash! BUG: kernel NULL pointer dereference, address: 0000000000000000 Oops: Oops: 0002 [#1] SMP NOPTI CPU: 56 UID: 0 PID: 165011 Comm: insmod Kdump: loaded Tainted: G S U OE 7.1.0-rc1 #1 Hardware name: Intel Corporation S2600BPB/S2600BPB RIP: 0010:ice_parser_profile_init+0x2d/0x1d0 [ice] Call Trace: <TASK> ? __pfx_ice_parser_profile_init+0x10/0x10 [ice] crash_init+0x127/0xff0 [crash_parser] do_one_initcall+0x45/0x310 do_init_module+0x64/0x270 init_module_from_file+0xcc/0xf0 idempotent_init_module+0x17b/0x280 __x64_sys_finit_module+0x6e/0xe0 Bail out early with -EINVAL when ptype is out of range. | ||||
| CVE-2026-68257 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix 32-bit overflow in CWSR total size calculation total_cwsr_size was computed in 32-bit before being used as a BO/SVM allocation size. With large ctx_save_restore_area_size and debug_memory_size multiplied by the XCC count, the product can wrap, yielding an undersized CWSR save area that firmware later overruns. Promote total_cwsr_size to u64 and use check_add_overflow()/ check_mul_overflow() in both kfd_queue_acquire_buffers() and kfd_queue_release_buffers(). (cherry picked from commit 319f7e13423ae3f486b9aea82f9ad2d6af0ee608) | ||||
| CVE-2026-68258 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds on CRIU restore queue type and mqd size We weren't checking whether the values provided in the private data in kfd CRIU restore were within bounds. For queue type, add a KFD_QUEUE_TYPE_MAX and ensure the provided type is less than it. For mqd_size, add new function mqd_size_from_queue_type and confirm that the provided mqd_size matches expectations. (cherry picked from commit f19d8086f6644083c913d70bfdeee20e1b6f46a5) | ||||
| CVE-2026-68259 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Check bounds in allocate_event_notification_slot The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT allocate_event_notification_slot has an option to specify an event id to allocate at, used by CRIU. We weren't checking the bounds on that value. Check them. v2: Lower bounds check is unecessary because of idr_alloc already rejecting negative numbers. Upper bounds check should be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might not yet exist (cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) | ||||
| CVE-2026-13053 | 1 Watchguard | 40 Firebox M270, Firebox M290, Firebox M295 and 37 more | 2026-08-10 | 7.2 High |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via a specially crafted CLI command. | ||||
| CVE-2026-13050 | 1 Watchguard | 1 Fireware Os | 2026-08-10 | N/A |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS networkd process could allow an authenticated privileged user to execute arbitrary code via a specially crafted requests to the Management Web UI. | ||||
| CVE-2026-68253 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: check streams[] bounds before overflow The data->streams[] overflow check is done after the buffer overflow has already happened. Move the overflow check before the write. Side note, emitting a warning splat with a backtrace might be overkill here, but prefer not changing the behaviour other than not doing the overrun. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 9284ab3b6e776c315883ac2611283d263c9460fd) | ||||
| CVE-2026-68159 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE __decode_pg_temp() decodes an user-controlled length but only rejects values large enough to overflow the allocation; it does not bound it to CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack out-of-bounds write. An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer entries at decode time. The bound is well below the old overflow threshold, so it also covers the allocation-size overflow the previous check guarded against. BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds Write of size 4 ... by task exploit kasan_report (mm/kasan/report.c:595) ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833) calc_target (net/ceph/osd_client.c:1638) __submit_request (net/ceph/osd_client.c:2394) ceph_osdc_start_request (net/ceph/osd_client.c:2490) ceph_osdc_call (net/ceph/osd_client.c:5164) rbd_dev_image_probe (drivers/block/rbd.c:6899) do_rbd_add (drivers/block/rbd.c:7138) ... kernel BUG at net/ceph/osdmap.c:2670! [ idryomov: do the same in __decode_pg_upmap_items() ] | ||||
| CVE-2026-68166 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: userfaultfd: prevent registration of special VMAs Vova Tokarev says: userfaultfd allows registration on shadow stack VMAs. With userfaultfd access, you can register on the shadow stack, discard a page ... and inject a page with chosen return addresses via UFFDIO_COPY. Update vma_can_userfault() to reject VM_SHADOW_STACK. While on it, also reject VM_SPECIAL so that if a driver would implement vm_uffd_ops, it wouldn't be possible to register special VMAs with userfaultfd. Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude hugetlb VMAs from the check for VM_SPECIAL. | ||||
| CVE-2026-68199 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB access from firmware ADDBA window size aggr_recv_addba_req_evt() logs a debug message when the firmware-supplied win_sz is outside [AGGR_WIN_SZ_MIN, AGGR_WIN_SZ_MAX] but does not return. The out-of-range win_sz is then used in TID_WINDOW_SZ() to compute a kzalloc size and stored in rxtid->hold_q_sz, leading to zero-size or overflowed allocations and subsequent out-of-bounds access. Clean up any previously active aggregation session for the TID first, then return early when win_sz is out of the valid range, instead of proceeding with a broken allocation size. | ||||