Export limit exceeded: 398479 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 28506 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28506 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98074 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bonding: do not clear curr_active_slave prematurely when releasing all slaves When releasing all slaves during bond destruction (all == true), __bond_release_one() unconditionally clears bond->curr_active_slave to NULL in every iteration. If a backup slave is released before the active slave, bond_alb_deinit_slave() triggers rlb_teach_disabled_mac_on_primary(), which increments the active slave dev promiscuity counter and sets bond_info->primary_is_promisc = 1. Because bond->curr_active_slave was prematurely cleared to NULL when releasing the backup slave, the subsequent iteration releasing the active slave evaluates oldcurrent as NULL, so bond_change_active_slave(bond, NULL) is skipped. Consequently, bond_alb_handle_active_change() is never called to decrement the promiscuity counter, permanently leaking promiscuous mode on the physical device after bond teardown. When oldcurrent == slave, bond_change_active_slave(bond, NULL) already sets bond->curr_active_slave to NULL. We only need to avoid selecting a new active slave when all == true. Replace the if (all) branch with if (!all && oldcurrent == slave). | ||||
| CVE-2026-98078 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: fix reversed sequence option serialization hton_seq() expects the host-order source first and the unaligned network-order destination second. The version 1 sync sender passes these arguments in reverse for both sequence blocks. This leaves 24 bytes of the kmalloc-backed message unwritten. It may disclose stale heap data and replace the live connection sequence state with values read from the buffer. Pass the connection sequence state as the source and the message payload as the destination for both blocks. | ||||
| CVE-2026-98097 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tipc: Dont send random pad bytes in RESET/ACTIVATE messages The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer. Replace the strcpy(data, l->if_name) with memcpy() so that the pad bytes are actually written (l->if_name[] is zero padded) rather than sending random bytes from the skb to the remote system. Replace two other strcpy() with strscpy(). | ||||
| CVE-2026-98039 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Require MEM_PERCPU for percpu kptr stores map_kptr_match_type() treats perm_flags as the set of register type flags that a kptr field permits. Adding MEM_PERCPU to that set for BPF_KPTR_PERCPU does not require the source register to carry it, however. The subset test consequently accepts both a plain bpf_obj_new() allocation and a referenced kernel pointer into a __percpu_kptr map field. Loads from the field are always marked MEM_PERCPU. Consumers then treat the stored value as the cookie returned by bpf_percpu_obj_new(): per-CPU pointer helpers relocate it, and map teardown selects the per-CPU free path. A plain allocation can therefore provide an arbitrary kernel read/write, while a kernel pointer can be relocated into an invalid address or sent through a missing destructor. Require the source MEM_PERCPU flag to match the destination field kind. This preserves valid bpf_percpu_obj_new() stores and rejects both the program-BTF and kernel-BTF variants. | ||||
| CVE-2026-98011 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: hhf: clamp quantum in change and init paths hhf_change() accepts any quantum from userspace, including 1. With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) in hhf_change() matching fq_codel_change(). Clamp hhf_init() to [256, 1<<20] matching the siblings, and remove the old fallback that only set quantum=256 on overflow. Conditions to recreate the bug: CONFIG_NET_SCH_HHF=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root hhf tc qdisc change dev dummy0 root hhf quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98012 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sfq: clamp quantum in change path sfq_change() accepts any non-negative quantum (only rejects (int)ctl->quantum < 0). With a crafted size table qdisc_pkt_len reaches ~2 GiB, so quantum=1 makes the deficit-refill loop spin ~2^31 times under the qdisc lock (a soft lockup / denial of service). Add max(256U, ...) matching fq_codel_change(). Reject quantum > 1<<20 with -EINVAL, matching fq_codel_change() and the init clamp. Conditions to recreate the bug: CONFIG_NET_SCH_SFQ=y. Requires CAP_NET_ADMIN (namespace-local via unshare -Urn suffices). tc qdisc add dev dummy0 root sfq tc qdisc change dev dummy0 root sfq quantum 1 stab data 32768 size_log 15 cell_log 0 | ||||
| CVE-2026-98021 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: reject oversized tx_queue_len at netlink parse time rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len without going through netif_change_tx_queue_len(), so a device created with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and still triggers the oversized ring allocations in pfifo_fast, tun and tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the RTM_NEWLINK-on-existing-device path reach the same sinks. Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers parse against this policy - rtnl_setlink(), rtnl_newlink() (create and change), and the veth peer nest - so every netlink path is capped at parse time and rejects the attribute with -ERANGE plus a proper "integer out of range" extack message before any device state is modified (the RTM_SETLINK half-application wart is gone with it). Document the bound in the rt-link.yaml netlink spec. Conditions to recreate the bug: - CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y. - Unprivileged user in a fresh user+net namespace (unshare -Urn): ip link add v0 txqueuelen 500000 type veth peer name v1 -> on the fixed kernel this is rejected with -ERANGE ("integer out of range" extack) instead of installing an oversized tx_queue_len that later inflates pfifo_fast/tun/tap ring allocations. - ip link set v0 txqueuelen 500000 is likewise rejected at parse time. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97907 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btrtl: Don't leak return code when parsing firmware format v2 When key_id from chip is zero, rtlbt_parse_firmware_v2() intentionally ignores all security headers. However, the implementation simply breaks from a switch statement and leaks uninitialized return code `rc' (if the first section is a security one) or the previous section's `rc'. Fix it by really skipping a loop with `continue'. For consistency and readability, also do the same for the default case. | ||||
| CVE-2026-97983 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: return compat ioctl results directly The compat handler handles VDUSE_IOTLB_GET_FD and VDUSE_VQ_GET_INFO, but then calls the native handler. Their different command sizes make native dispatch return -ENOIOCTLCMD. For GET_FD, this overwrites receive_fd()'s return value after the descriptor is installed, leaking one fd per call. Return handled compat results directly and use native dispatch only for other commands. | ||||
| CVE-2026-97989 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: vduse: validate virtqueue alignment vduse_validate_config() only checks the upper bound of vq_align. Invalid values can therefore reach vring_create_virtqueue_map(). The split-ring helpers use align - 1 as a bit mask, so the alignment must be a non-zero power of two. A zero value makes vring_size() drop the descriptor and available-ring part and vring_init() leave the used ring pointer NULL. The VIRTIO spec requires the used ring to start at an address aligned to at least 4 bytes. Reject values below VRING_USED_ALIGN_SIZE as well as non-power-of-two values before they reach the virtio ring helpers. Opening a virtio-net device created with vq_align=0 triggered: BUG: KASAN: null-ptr-deref in virtqueue_kick_prepare_split+0xe3/0x100 Read of size 2 at addr 0000000000000000 by task systemd-network/1062 Call Trace (relevant frames): dump_stack_lvl print_report kasan_report __asan_load2 virtqueue_kick_prepare_split+0xe3/0x100 virtqueue_kick_prepare+0x40/0x60 try_fill_recv+0x857/0x1250 virtnet_open+0x189/0x460 __dev_open+0x225/0x390 __dev_change_flags+0x368/0x3b0 netif_change_flags+0x56/0xc0 do_setlink.isra.0+0x68c/0x1e30 Validate the value before it reaches the virtio ring helpers. | ||||
| CVE-2026-97865 | 1 Open-web-analytics | 1 Open-web-analytics | 2026-09-25 | 7.3 High |
| A security flaw has been discovered in Open-Web-Analytics up to 1.8.1. Affected is the function Event::loadFromArray of the file queue.php of the component Remote Event Queue Endpoint. Performing a manipulation results in deserialization. The attack can be initiated remotely. Upgrading to version 1.8.2 is able to address this issue. The patch is named 78c1222ec0e2119d84684032da1541120a2cdd23. The affected component should be upgraded. | ||||
| CVE-2025-32000 | 1 Hcltech | 1 Hcl Sametime | 2026-09-25 | 4.3 Medium |
| HCL Sametime is vulnerable to insufficient input sanitization. The application did not appropriately sanitize user input. When user input is implicitly or explicitly trusted without sufficient sanitization, malicious actors can leverage this vulnerability. | ||||
| CVE-2026-61782 | 1 Web-infra-dev | 1 Rsdoctor | 2026-09-25 | 7.5 High |
| Rsdoctor is a build analyzer tailored for projects built with Rspack. Prior to version 1.5.16, the default Rsdoctor report HTTP server started by `@rsdoctor/rspack-plugin` binds to all network interfaces (`0.0.0.0`) and serves a `POST /api/data/key` endpoint with no authentication and wildcard CORS (`Access-Control-Allow-Origin: *`). Any network-adjacent or remote attacker can send a single unauthenticated request to retrieve the full source code of all compiled JavaScript modules (`moduleCodeMap`), serialized build configuration (`configs`), error details, and other sensitive build metadata. This server is enabled by default in non-CI environments, requiring no special configuration from the victim developer. Version 1.5.16 patches the issue. | ||||
| CVE-2026-97929 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: validate URB actual_length in interrupt callback i_usx2y_in04_int() processes the interrupt URB data without checking urb->actual_length. A short transfer from a malfunctioning device would cause the handler to process uninitialized heap data from the kmalloc-allocated in04_buf, which is then copied to the mmap-accessible ctl_snapshot[] array. Fix by using kzalloc() for in04_buf to zero-initialize the buffer, and adding an actual_length check to skip processing on short transfers while still resubmitting the URB. | ||||
| CVE-2026-97935 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Set the trace clock before registering the histogram trigger hist_register_trigger() puts the trigger on the global named_triggers list in cmd_ops->init(), and only then sets the trace clock: if (data->cmd_ops->init) { ret = data->cmd_ops->init(data); if (ret < 0) goto out; } if (hist_data->enable_timestamps) { ret = tracing_set_clock(file->tr, hist_data->attrs->clock); if (ret) { hist_err(tr, HIST_ERR_SET_CLOCK_FAIL, errpos(clock)); goto out; } The clock string is not checked anywhere before that call, so a named trigger using common_timestamp with an unknown clock fails after it has already become findable. event_hist_trigger_parse() then frees it without taking it off the list, and the next lookup by name reads the freed object: ~# cd /sys/kernel/tracing/events/sched/sched_switch ~# echo 'hist:name=foo:keys=common_pid:ts=common_timestamp:clock=bogus' > trigger bash: echo: write error: Invalid argument ~# echo 'hist:name=foo:keys=common_pid' > trigger BUG: KASAN: slab-use-after-free in find_named_trigger+0xac/0xc0 Read of size 8 at addr ffff88800915d760 by task init/1 find_named_trigger+0xac/0xc0 hist_register_trigger+0xc1/0x900 event_hist_trigger_parse+0x3146/0x6af0 event_trigger_write+0xce/0x160 Freed by task 63: kfree+0x154/0x420 trigger_kthread_fn+0xfd/0x160 Set the clock before the trigger is registered, so that nothing which can fail runs after it is published, the way commit 6f86bdeab633 ("tracing: Fix bad hist from corrupting named_triggers list") moved the registration below the rest of the setup. tracing_set_filter_buffering() is reference counted, so the init failure path has to drop the reference that the clock block now takes first. | ||||
| CVE-2026-75158 | 1 Apache | 1 Airflow | 2026-09-25 | 4.3 Medium |
| Apache Airflow's `/assets/events` API returned asset events for every Dag in the deployment, with no filter restricting them to the Dags the caller is authorized to read. Any authenticated user holding asset-read access could therefore enumerate asset events — including the source Dag ID, task ID, run ID and event timestamps — for Dags they have no permission to see. Because the filter was also absent from the count query, `total_entries` and pagination disclosed the existence of hidden Dags even without inspecting individual rows. Deployments are affected whenever per-Dag access control is used to separate teams or tenants; no special configuration is required. Upgrade to apache-airflow 3.3.2 or later. | ||||
| CVE-2026-97590 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/crypto: Fix missing scrub of temp buffers with PAES algorithm In function ctr_paes_do_crypt() there is a buffer used to process remaining bytes < AES_BLOCK_SIZE. This buffer was not scrubbed and thus could lead to expose of unwanted data. Rework the code to explicitly scrub the buffer at the end of the function to avoid exposure of maybe sensitive data. In function __xts_2keys_prep_param() change the existing scrub to clean the whole param block instead of just the key field. | ||||
| CVE-2026-95843 | 2 Moquette, Moquette-io | 2 Moquette, Moquette | 2026-09-25 | 7.5 High |
| Moquette is a lightweight Java MQTT broker. Prior to 0.18.1, PostOffice.subscribe parses a shared-subscription filter through SharedSubscriptionUtils.extractShareName before validating the complete $share/{shareName}/{topicFilter} structure. A remote client can send a filter such as $share/grp without a topic-filter portion, causing a StringIndexOutOfBoundsException while calculating the share name. The exception terminates command handling on the shared session event loop and can deny service to other client sessions assigned to that loop. This issue is fixed in version 0.18.1. | ||||
| CVE-2026-97564 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: reject userspace cifs.idmap descriptions cifs.idmap key descriptions carry authority-bearing fields (owner and group SIDs and uid/gid values in "os:"/"gs:"/"oi:"/"gi:" form) that the cifs.idmap upcall helper treats as kernel-originating inputs. Unlike its sibling cifs.spnego, the cifs.idmap key type has no vet_description hook, so userspace can create keys of this type through request_key(2)/add_key(2) and supply those fields without CIFS origin. A request_key(2) call with a non-NULL callout then drives a root usermodehelper upcall (/sbin/request-key -> cifs.idmap) that consumes the unvetted description in root context. Only accept cifs.idmap descriptions while CIFS is using its private root_cred to request the key. id_to_sid()/sid_to_id() already run under override_creds(root_cred), so the kernel-originated path is unaffected. This mirrors commit 3da1fdf4efbc ("smb: client: reject userspace cifs.spnego descriptions"), which applied the same restriction to cifs.spnego. | ||||