Export limit exceeded: 382273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 382273 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (382273 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-74650 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in WMM_param_handler() WMM_param_handler() copies a fixed-size WMM parameter element out of a received information element without checking that the element is long enough, causing an out-of-bounds read for a short WMM IE. The handler reads sizeof(struct WMM_para_element) (18) bytes at pIE->data + 6, so it requires pIE->length to be at least 24 (WLAN_WMM_LEN), but it never validates the length. Two of its three callers reach it after matching only the WMM OUI: OnAssocRsp() in rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a 4-byte OUI, before calling the handler. A vendor-specific IE carrying the WMM OUI but a length between 6 and 23, placed in an association response or in the IE blob handed to join_cmd_hdl(), passes the OUI check and then makes the memcmp() and memcpy() at pIE->data + 6 read past the end of the element. OnAssocRsp() parses a frame received from the AP, so this is reachable from a remote peer. The remaining caller in rtw_wlan_util.c already guards the handler with "pIE->length == WLAN_WMM_LEN". Move the equivalent check into the handler itself so every caller is covered; the sibling IE handlers in the same parsing loop (HT_caps_handler(), HT_info_handler(), ERP_IE_handler()) likewise bound their accesses by pIE->length. | ||||
| CVE-2026-74656 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: fix use-after-free in fib_nhc_update_mtu() fib_nhc_update_mtu() walks the nexthop exception table under RTNL, but RTNL does not serialize this walk with PMTU exception updates. The walk uses rcu_dereference_protected() with a constant true condition without holding fnhe_lock. The following interleaving can therefore occur: CPU 0 CPU 1 fib_nhc_update_mtu() update_or_create_fnhe() load fnhe spin_lock_bh(&fnhe_lock) fnhe_remove_oldest() unlink fnhe kfree_rcu(fnhe, rcu) <quiescent state> access fnhe after grace period KASAN reported: BUG: KASAN: slab-use-after-free in fib_nhc_update_mtu+0x3df/0x410 Read of size 8 at addr ffff888107d49000 by task poc/90 Call Trace: fib_nhc_update_mtu+0x3df/0x410 fib_sync_mtu+0x7a/0xd0 fib_netdev_event+0x229/0x3f0 netif_set_mtu_ext+0x33a/0x570 dev_set_mtu+0x88/0x120 The same walk updates fnhe_pmtu and fnhe_mtu_locked. These fields form a pair and other writers serialize them with fnhe_lock. RCU alone prevents reclamation, but would still allow concurrent writers to leave a mixed pair. Walk the table under RCU and acquire fnhe_lock only while updating each exception. RCU keeps the current entry alive while the short critical section serializes its paired PMTU fields. This avoids holding the global lock while scanning all 2048 buckets for every nexthop. | ||||
| CVE-2026-74664 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: reallocate update replies for mismatched IDs ovs_flow_cmd_new() preallocates the optional reply skb before it takes ovs_mutex and before it knows which existing flow will be updated. That is normally fine because the skb is sized from the request flow identifier. That identifier also becomes the inserted flow's identifier. For updates, however, a request with a UFID may miss the UFID lookup and then fall back to the flow key lookup. That lookup can legitimately find an existing key-identified flow. UFIDs are optional and the flow key is the primary identifier. For echoed replies, ovs_flow_cmd_fill_info() writes the matched flow's identifier, not the request identifier used for the preallocation. A short request UFID can therefore leave too little room for the key identifier. The fill can then fail with -EMSGSIZE and hit the BUG_ON(error < 0) in the update path. Once the update target has been resolved, reallocate the reply skb if the matched flow needs a larger reply than the request identifier allowed. Do this before replacing the actions so the request can still fail cleanly if the rare extra allocation fails. | ||||
| CVE-2026-74666 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: packet: synchronize pressure clearing with ring reconfiguration packet_set_ring() updates the RX ring state under sk_receive_queue.lock, but used to publish the tpacket receive mode through po->prot_hook.func after releasing that lock. packet_poll() and packet_recvmsg() can then run the pressure clearing path after the ring has been cleared while still seeing tpacket_rcv, causing __packet_rcv_has_room() to dereference stale or NULL ring storage. Move the existing receive hook assignment into the same sk_receive_queue.lock section as the ring state update. Keep the assignment otherwise unchanged, including on TX ring reconfiguration, to avoid adding behavior changes that are not required for the fix. Serialize packet_recvmsg() pressure clearing with the same queue lock only after PACKET_SOCK_PRESSURE has been observed. If the flag is clear and the socket has moved away from tpacket_rcv, packet_set_ring() has already detached the socket and waited for synchronize_net(), so no new packet input can set the flag again. packet_poll() already holds sk_receive_queue.lock, so it uses the new unlocked helper directly. | ||||
| CVE-2026-74669 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ipvs: clear IPv4 options after rebasing tunnel ICMP errors ip_vs_in_icmp() rebases an skb from the outer ICMP packet to the quoted original request before passing it to icmp_send(). However, IPCB(skb)->opt still describes the outer IPv4 header. A timestamp option in the outer header can therefore leave an offset that points into the quoted transport header after the rebase. __ip_options_echo() treats a byte at that stale location as the option length and copies it into the fixed-size option storage on the __icmp_send() stack, causing a stack out-of-bounds write. Clear the stale option metadata after resetting the network header. Keep the remaining control block fields, including the ingress interface used by the ICMP response path. | ||||
| CVE-2026-74673 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: evdev - fix information leak in evdev_pass_values() In evdev_pass_values(), the input_event structure is allocated on the kernel stack and populated field-by-field. However, it is never fully initialized. On architectures where struct input_event contains explicit or implicit padding (such as the 32-bit __pad field on SPARC64), these padding bytes are left uninitialized. When this event structure is subsequently passed to the client buffer and later copied to userspace, the uninitialized padding bytes leak kernel stack memory, potentially exposing sensitive information. Similar issues exist in __evdev_queue_syn_dropped and __pass_event. Fix this by explicitly zeroing the entire event structure with memset() before populating its fields. This ensures all padding bytes are cleared before the data crosses the security boundary. | ||||
| CVE-2026-74683 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: evdev - sanitize event type index when fetching event masks The user-supplied event type index passed to EVIOCGMASK / EVIOCSMASK ioctls is used to index the static counts array in evdev_get_mask_cnt() and client evmasks array in evdev_get_mask(). While the event type is architecturally bounded by EV_CNT, speculative execution may mispredict bounds checks and perform out-of-bounds loads. Sanitize the event type index in evdev_get_mask_cnt() branchlessly using array_index_mask_nospec(). This clamps the index to 0 for safe array access and forces the returned count to 0 speculatively when the index is out of bounds. We do not need additional array_index_nospec() calls in evdev_get_mask() because evdev_get_mask_cnt() speculatively forces the count (and resulting xfer_size) to 0 for out-of-bounds types, preventing any speculative memory access to client evmasks array. | ||||
| CVE-2026-74695 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_flow_table: drop existing skb dst before skb_dst_set_noref() Incoming skbs passing through netfilter flowtable offload hooks (or XFRM offload path) might already carry a ref-counted dst_entry assigned during earlier RX or routing steps. Calling skb_dst_set_noref() when skb already holds a ref-counted dst overwrites skb->_skb_refdst, leaking the previous dst_entry reference count and triggering a DEBUG_NET_WARN_ON_ONCE assertion in skb_dst_check_unset(): WARNING: at skb_dst_check_unset include/linux/skbuff.h:1170 WARNING: at skb_dst_set_noref include/linux/skbuff.h:1234 WARNING: at nf_flow_offload_ip_hook+0xf6c/0x2b60 net/netfilter/nf_flow_table_ip.c:864 Drop any existing dst_entry reference with skb_dst_drop(skb) before setting the non-referenced flowtable destination. | ||||
| CVE-2024-3154 | 1 Redhat | 1 Openshift | 2026-08-24 | 7.2 High |
| A flaw was found in cri-o, where an arbitrary systemd property can be injected via a Pod annotation. Any user who can create a pod with an arbitrary annotation may perform an arbitrary action on the host system. | ||||
| CVE-2026-74584 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/bnxt_re: zero shared page before exposing to userspace bnxt_re_alloc_ucontext() allocates uctx->shpg via __get_free_page(GFP_KERNEL). The buddy allocator does not zero pages without __GFP_ZERO, so the page contains stale kernel data from whatever object most recently freed it. The page is then mapped into userspace via vm_insert_page() under BNXT_RE_MMAP_SH_PAGE in bnxt_re_mmap(). The driver only ever writes 4 bytes (a u32 AVID) at offset BNXT_RE_AVID_OFFT (0x10) inside bnxt_re_create_ah(); the remaining 4092 bytes of the page are exposed to userspace unsanitised, leaking kernel memory contents. Any user with access to /dev/infiniband/uverbsX on a host with a bnxt_re device (typically rdma group membership) can read this data via a single mmap() at pgoff 0 after IB_USER_VERBS_CMD_GET_CONTEXT. Other shared pages in the same file already use get_zeroed_page() correctly: drivers/infiniband/hw/bnxt_re/ib_verbs.c srq->uctx_srq_page = (void *)get_zeroed_page(GFP_KERNEL); cq->uctx_cq_page = (void *)get_zeroed_page(GFP_KERNEL); uctx->shpg is the only outlier. Bring it in line with the existing convention by switching to get_zeroed_page(). | ||||
| CVE-2026-74588 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: keep chunk->transport in step with the list it is queued on __sctp_outq_flush_rtx() moves a gap-acked chunk onto another transport's transmitted list without updating chunk->transport: if (chunk->tsn_gap_acked) { list_move_tail(&chunk->transmitted_list, &transport->transmitted); continue; } The chunk then sits on a live transport's list while chunk->transport still names a different one. If that transport is removed - sctp_assoc_rm_peer() from an ASCONF Delete-IP - sctp_transport_free() RCU-frees it and the chunk is left with a dangling pointer. sctp_assoc_rm_peer() scrubs peer->transmitted and asoc->outqueue.out_chunk_list, but the chunk is on neither. The pointer is not followed while tsn_gap_acked is set. A SACK that reneges on the TSN clears the flag, and the next SACK reaches tchunk->transport->flight_size -= sctp_data_size(tchunk); inside the freed transport. KASAN reports a slab-use-after-free read in sctp_check_transmitted(), freed from sctp_assoc_rm_peer(). Both the removal and the SACKs come from the association peer. Set chunk->transport at the move. The ordinary resend path needs nothing: it reaches its list_move_tail() only after sctp_packet_append_chunk() returned SCTP_XMIT_OK, and __sctp_packet_append_chunk() has rebound the chunk by then. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74591 | 1 Linux | 1 Linux Kernel | 2026-08-24 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mm/filemap: __filemap_add_folio() restore index before retrying In __filemap_add_folio()'s split-a-conflict loop, xas_set_order() is applied repeatedly: each application modifies xas.xa_index, rounding it down according to the split_order attempted at that stage: and if all goes as intended, it eventually (or immediately) converges on an xas_try_split() to the required folio_order, with xas.xa_index now the same as index: then xas_store() puts the new folio into the xarray there. But if a new node was needed, and GFP_NOWAIT allocation did not get one, the lock is dropped, xas_nomem() used to allocate, and sequence retried. If (that part of) the xarray is unchanged when the lock is reacquired, no problem. But what if the conflict was meanwhile resolved by another thread (perhaps even doing the same thing, inserting a folio at that same index)? Isn't there a danger of now putting our folio into the xarray at an intermediate rounded-down index? With !folio_contains() bug to follow, when CONFIG_DEBUG_VM=y is checking for that. Fix this with an xas_set_order() to restore the original xas.xa_index at the bottom of the loop, so the retry does a full re-evaluation after reacquiring the lock, and cannot reach xas_store() with the wrong index. Production was suffering from rare SIGILLs and SIGSEGVs, executable text found a page away from where it belonged, !folio_contains() bug hit when debug enabled: symptoms not seen since this patch went in. | ||||
| CVE-2026-28165 | 2 Unitedover, Wordpress | 2 Digits, Wordpress | 2026-08-24 | 9.8 Critical |
| Unauthenticated Privilege Escalation in Digits <= 9.2 versions. | ||||
| CVE-2026-28166 | 2 Goodlayers, Wordpress | 2 Tour Master, Wordpress | 2026-08-24 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Tourmaster <= 5.4.9 versions. | ||||
| CVE-2026-78186 | 1 Open5gs | 1 Open5gs | 2026-08-24 | 4.3 Medium |
| A flaw has been found in Open5GS up to 2.8.0. This affects an unknown function of the file src/hss/hss-cx-path.c of the component HSS. This manipulation of the argument User-Name causes reachable assertion. The attack is possible to be carried out remotely. The exploit has been published and may be used. Patch name: c9abe09421eb99bbf1cd7862a3d375e58a4eb9e4. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2026-66610 | 2 Thembay, Wordpress | 2 Urna, Wordpress | 2026-08-24 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Urna <= 2.6.2 versions. | ||||
| CVE-2025-61258 | 1 Outsystems | 1 Platform Server | 2026-08-24 | 7.5 High |
| Outsystems Platform Server 11.18.1.37828 allows attackers to cause a denial of service via a crafted content-length value mismatching the body length. NOTE: the Supplier indicates that they are unable to reproduce this. | ||||
| CVE-2026-28162 | 2 Franky, Wordpress | 2 Events Made Easy, Wordpress | 2026-08-24 | 7.1 High |
| Unauthenticated Cross Site Scripting (XSS) in Events Made Easy <= 3.2.5 versions. | ||||
| CVE-2026-28167 | 2 Super-forms, Wordpress | 2 Super Forms, Wordpress | 2026-08-24 | 7.5 High |
| Unauthenticated Arbitrary File Download in Super Forms <= 6.3.315 versions. | ||||
| CVE-2026-78365 | 1 Roskus | 1 Prospero Flow Crm | 2026-08-24 | N/A |
| Authorization Bypass Through User-Controlled Key in the supplier API in Roskus Prospero Flow CRM 4.0.0 through 5.3.1 allows any authenticated user to read and modify another company's supplier record, and to reassign it to their own company, via a PUT request to /api/supplier/{id} setting company_id in the body. | ||||