Export limit exceeded: 376620 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376620 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68230 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: amlogic-c3: Add validations for ae and awb config Avoid invalid memory access if the zones_num is bigger than zone_weight. This patch fixes the following smatch errors: drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:111 c3_isp_params_awb_wt() error: buffer overflow 'cfg->zone_weight' 768 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max drivers/media/platform/amlogic/c3/isp/c3-isp-params.c:227 c3_isp_params_ae_wt() error: buffer overflow 'cfg->zone_weight' 255 <= u32max | ||||
| CVE-2026-68233 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: Shut down BO cache timer before teardown The BO cache timer callback schedules time_work, and time_work can rearm the timer through vc4_bo_cache_free_old(). vc4_bo_cache_destroy() deletes the timer and then cancels the work, which does not break that cycle: the work being cancelled can rearm the timer, and the timer then queues work again after teardown. Use timer_shutdown_sync() instead, so the timer cannot be rearmed and the cycle ends with cancel_work_sync(). | ||||
| CVE-2026-68237 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: fix indefinite fence wait during GPU reset pre_reset only force-completes fences of MAPPED queues. A queue in any other state (e.g. mid-eviction) keeps its last_fence pending; after a GPU reset that fence never signals, so the eviction/suspend worker and process teardown (amdgpu_evf_mgr_flush_suspend) wait on it forever and wedge the machine: INFO: task kworker/6:28 blocked for more than 120 seconds. Workqueue: events amdgpu_eviction_fence_suspend_worker [amdgpu] Call Trace: dma_fence_wait_timeout+0x7e/0x130 amdgpu_userq_evict+0x67/0x140 [amdgpu] amdgpu_eviction_fence_suspend_worker+0xd8/0x160 [amdgpu] process_scheduled_works+0xa6/0x420 Force-complete every queue's fence regardless of state. The unmap and mark-hung step stays gated on MAPPED, since unmapping a queue that is not mapped is invalid. (cherry picked from commit 9102b39fa924dcc3dc75a3137bfa9633c40b88c0) | ||||
| CVE-2026-68238 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Release VFCT ACPI table reference amdgpu_acpi_vfct_bios() fetches the VFCT table with acpi_get_table() but never releases it. acpi_get_table() takes a reference on the table (incrementing its validation_count and mapping it on the 0->1 transition); without a paired acpi_put_table() the mapping is leaked on every call, whether or not a matching VBIOS image is found. Route all exit paths after the table is acquired through a common acpi_put_table(). The VBIOS image is copied out with kmemdup() before the table is released, so it remains valid for the caller. (cherry picked from commit ca5988682b4cba4cd125a0fa99b2de1239164ae4) | ||||
| CVE-2026-68246 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx11: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit daa62107452d2451787c4248ca38fa2d1a0cbefd) | ||||
| CVE-2026-68209 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: sun4i-csi: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. sun4i_csi_start_streaming() returned -EINVAL when no matching CSI format could be found, before any setup (scratch buffer allocation, pipeline start) had been performed. The remaining error paths already converge on the err_clear_dma_queue label, which calls return_all_buffers(..., VB2_BUF_STATE_QUEUED) under csi->qlock. Jump to that label directly: the intermediate err_disable_device / err_disable_pipeline / err_free_scratch_buffer labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68249 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma5.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 8d144a0eb09537055841af48c9e7c2d4cd48e84d) | ||||
| CVE-2026-18146 | 2026-08-13 | 7.2 High | ||
| The Fluent Forms – Customizable Contact Forms, Survey, Quiz, & Conversational Form Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Notification Smartcode Values in all versions up to, and including, 6.2.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute in the browser of an administrator (or any user with the Fluent Forms entry-viewing capability) when they view the form's entry Submission Logs in the WordPress admin dashboard. Exploitation requires that a site administrator or Fluent Forms manager has configured an email notification whose subject or static (direct) Send To value references an attacker-influenced Smartcode such as an input_password field value, a cookie value, or submission.response. | ||||
| CVE-2026-68211 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: stm32-dcmipp: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. dcmipp_bytecap_start_streaming() returned -EINVAL when the source subdevice could not be resolved from the media graph, before pm_runtime_resume_and_get() and media_pipeline_start() had been called. The remaining error paths already converge on the err_buffer_done label, which calls dcmipp_bytecap_all_buffers_done(..., VB2_BUF_STATE_QUEUED). Jump to that label directly: the intermediate err_pm_put / err_media_pipeline_stop labels are skipped, which is correct because nothing they would undo has happened yet. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68212 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: saa7134: Fix a possible memory leak in saa7134_video_init1 In saa7134_video_init1(), the return value of the first saa7134_pgtable_alloc() is not checked. If it fails, the function continues as if successful, leaving the driver with an invalid page table. Additionally, if vb2_queue_init() for the VBI queue fails after the video queue page table has been allocated, the allocated memory is not freed before returning. The second saa7134_pgtable_alloc() also lacks a return value check. Errors occur during device probing before the device is fully registered, the normal cleanup path in saa7134_finidev() is not executed, leading to memory leaks and potential use of uninitialized DMA resources. Check the return value of both saa7134_pgtable_alloc() calls and propagate errors. On failure of any later step, free allocated page tables to avoid memory leaks. Ensure control handlers are also released on error to prevent further resource leakage. Found by code review. | ||||
| CVE-2026-68213 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832_sdr: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. rtl2832_sdr_start_streaming() had multiple error paths that hit this trap: two direct early returns (-ENODEV, -ERESTARTSYS), plus six `goto err` paths covering subdev s_power, tuner setup, ADC setup, stream-buffer allocation, urb allocation, and urb submission failures. None of them returned the queued buffers. The original function had no distinct success exit and fell straight through into the err label, which previously only did mutex_unlock and "return ret". Adding queued-buffer cleanup at err must therefore be paired with an explicit success return; otherwise every successful start would also drain the buffer queue and kill streaming. Add that success return, then add rtl2832_sdr_cleanup_queued_bufs() at the err label and before each early return. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). The err label still does not roll back power_ctrl(), frontend_ctrl(), the POWER_ON flag, or stream/URB allocations that may have happened before the failing step. Those are pre-existing leaks of a different class and are not addressed here. | ||||
| CVE-2026-68215 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: radio-si476x: Unregister v4l2_device on probe failure si476x_radio_probe() registers radio->v4l2dev before allocating the V4L2 controls and before registering the video device. If any of those later steps fails, probe returns through the exit label after freeing only the control handler. A failed probe does not call si476x_radio_remove(), so the v4l2_device_unregister() there is not reached. This leaves the parent device reference taken by v4l2_device_register() behind on the error path. Unregister the V4L2 device in the probe error path after freeing the controls. | ||||
| CVE-2026-68217 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: pwc: Drain fill_buf on start_streaming() failure pwc_isoc_init() submits its isochronous URBs with usb_submit_urb(.., GFP_KERNEL) in a loop. After the first URB is submitted, its completion handler pwc_isoc_handler() can run on another CPU before the loop finishes: start_streaming() pwc_isoc_init() usb_submit_urb(urbs[0], GFP_KERNEL) pwc_isoc_handler(urbs[0]) pdev->fill_buf = pwc_get_next_fill_buf(pdev) usb_submit_urb(urbs[i>0], ..) -> fails pwc_isoc_cleanup(pdev) /* kills URBs */ return ret; pwc_cleanup_queued_bufs(pdev, VB2_BUF_STATE_QUEUED) pwc_get_next_fill_buf() detaches a buffer from pdev->queued_bufs and stores it in pdev->fill_buf. The error path in start_streaming() only drains pdev->queued_bufs, so the buffer parked in pdev->fill_buf is leaked. vb2_start_streaming() then triggers WARN_ON(owned_by_drv_count). stop_streaming() already handles this since commit 80b0963e1698 ("[media] pwc: fix WARN_ON"), which added the fill_buf drain in the teardown path but not in the start_streaming() error path. Mirror that handling on failure so start_streaming() returns with no buffer owned by the driver. Issue identified by automated review of the INV-003 series at https://sashiko.dev/ | ||||
| CVE-2026-68222 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: msi2500: Return queued buffers on start_streaming() failure The vb2 framework hands buffers to the driver via buf_queue() before calling start_streaming(). If start_streaming() returns an error without first returning those buffers via vb2_buffer_done(), vb2_start_streaming() fires WARN_ON(owned_by_drv_count) and the queued buffers leak. msi2500_start_streaming() had five error paths that all hit this trap and were further tangled by ret-overwriting between calls: - -ENODEV when the USB device was already disconnected - -ERESTARTSYS when mutex_lock_interruptible() was interrupted - msi2500_set_usb_adc() failure: ret was silently overwritten by the next call (msi2500_isoc_init), so the error was lost entirely - msi2500_isoc_init() failure: cleanup_queued_bufs was called, but the function then fell through to msi2500_ctrl_msg() and again masked the original error by overwriting ret - msi2500_ctrl_msg(CMD_START_STREAMING) failure: no cleanup at all, leaving isoc URBs submitted with no way for the driver to consume them Consolidate the error paths into a small goto chain. Every failure now stops the function, drains the queued-buffer list, and returns the real error code. The ctrl_msg failure path also rolls back the preceding msi2500_isoc_init() via msi2500_isoc_cleanup() before unlocking and draining. The cleanup helper takes a vb2_buffer_state argument so that the start_streaming error paths can pass VB2_BUF_STATE_QUEUED (as expected by userspace on start_streaming failure) while stop_streaming keeps its existing VB2_BUF_STATE_ERROR semantics. This mirrors the uvcvideo fix in commit 4cf3b6fd54eb ("media: uvcvideo: Return queued buffers on start_streaming() failure"). | ||||
| CVE-2026-68227 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cx231xx: fix devres lifetime USB drivers bind to USB interfaces and any device managed resources should have their lifetime tied to the interface rather than parent USB device. This avoids issues like memory leaks when drivers are unbound without their devices being physically disconnected (e.g. on probe deferral or configuration changes). Fix the driver state lifetime so that it is released on driver unbind. | ||||
| CVE-2026-68229 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: cedrus: skip invalid H.264 reference list entries Cedrus consumes H.264 ref_pic_list0/ref_pic_list1 entries from the stateless slice control and later uses their indices to look up decode->dpb[] in _cedrus_write_ref_list(). Rejecting such controls in cedrus_try_ctrl() would break existing userspace, since stateless H.264 reference lists may legitimately carry out-of-range indices for missing references. Instead, guard the actual DPB lookup in Cedrus and skip entries whose indices do not fit the fixed V4L2_H264_NUM_DPB_ENTRIES array. This keeps the fix local to the driver use site and avoids out-of-bounds reads from malformed or unsupported reference list entries. | ||||
| CVE-2026-68234 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix bo->pin leaking in amdgpu_bo_create_reserved amdgpu_bo_create_reserved() only allocates a new BO when *bo_ptr (struct amdgpu_bo **bo_ptr as input parameter) is NULL, it simply skips creation when *bo_ptr is non-NULL. But it unconditionally reserves, pins, gart allocates and maps the BO afterwards. When the same non-NULL BO pointer is passed in again, for example firmware buffers that live in adev and are re-loaded on every resume / cp_resume / start under AMDGPU_FW_LOAD_DIRECT, amdgpu_bo_pin() just increases pin_count unconditionally, however the matching teardown only unpins once, so pin_count never drops to zero, so TTM is not able to move, swap or evict a BO, causing BO leaks. This commit fixes this issue by only pinning the bo once at creation, and repeated calls no longer take additional pin references. (cherry picked from commit 3ddc0ae76202c447b6aec61e907b852bc94671cf) | ||||
| CVE-2026-68251 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma6.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit c17a508a7d652da3728f8bbc481bfffe96d65a87) | ||||
| CVE-2026-68253 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/hdcp: check streams[] bounds before overflow The data->streams[] overflow check is done after the buffer overflow has already happened. Move the overflow check before the write. Side note, emitting a warning splat with a backtrace might be overkill here, but prefer not changing the behaviour other than not doing the overrun. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 9284ab3b6e776c315883ac2611283d263c9460fd) | ||||
| CVE-2026-68252 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma7.0: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit 9723a8bed3aa251a26bee4583bac9d8fb064dd44) | ||||