Export limit exceeded: 409968 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409968 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98858 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: io_uring: fix task_work add use-after-free with SQPOLL For SQPOLL, the sqpoll thread runs task_work off its own list and doesn't need to be told about it, so it can pop and complete a request as soon as mpscq_push() has published it. If that was the last request holding the ring alive, io_ring_exit_work() then frees the ctx, stops the thread, and with it the tctx, while io_req_normal_work_add() is still looking at both after the push: BUG: KASAN: slab-use-after-free in io_req_normal_work_add+0x439/0x510 Read of size 4 at addr ff11000000ca0000 by task repro/55 (...) BUG: KASAN: slab-use-after-free in queue_work_on+0x25/0x70 Write of size 8 at addr ff11000000c3bd00 by task repro/55 Hold an RCU read lock across the add, like io_req_local_work_add() already does, and have io_ring_exit_work() wait for a grace period for SQPOLL rings as well before freeing the ctx. | ||||
| CVE-2026-98863 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86: Re-pend GET_NESTED_STATE_PAGES if getting said pages fails Re-pend GET_NESTED_STATE_PAGES before exiting to userspace if getting the nested pages fails in the KVM_RUN path. If userspace re-runs the vCPU, and vmcs02 holds valid PFNs from the *previous* run of L2, then KVM could re-enter L2 with stale, unpinned PFNs mapped into e.g. the vAPIC page. Note, both SVM and VMX (as of commit 11722439fb20 ("KVM: nVMX: Ensure KVM_REQ_GET_NESTED_STATE_PAGES is cleared on VM-Exit") ensure the request is cleared on VM-Exit (including the "forced" case), i.e. there is no risk of double-mapping due to emulated VMLAUNCH/VMRESUME/VMRUN *and* the request trying to map the nested pages. | ||||
| CVE-2026-98867 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: bound the logical key offset from persistent memory cache_key_decode() takes a key's logical off from the cache device and later indexes req_key_tree->subtrees[] by it in get_subtree(). An off past the device forms a subtree pointer outside the array, which rb_insert() writes through during replay. Reject a key of zero length, or whose off+len (computed in 64 bits) exceeds the device size, before it is used. | ||||
| CVE-2026-85362 | 1 Microsoft | 28 Windows 10 1607, Windows 10 1809, Windows 10 21h2 and 25 more | 2026-10-18 | 7 High |
| Release of invalid pointer or reference in Windows Management Instrumentation allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-97811 | 1 Microsoft | 20 Windows 10 1809, Windows 10 21h2, Windows 10 21h2 and 17 more | 2026-10-18 | 7.8 High |
| Double free in OpenSSH for Windows allows an authorized attacker to elevate privileges locally. | ||||
| CVE-2026-112015 | 1 Omnigent-ai | 1 Omnigent | 2026-10-18 | 7.5 High |
| Omnigent 0.3.0 before 0.14.0 contains a path traversal vulnerability that allows authenticated users to escape the workspace by setting os_env.cwd on nested sub-agents. Attackers can upload a bundle whose sub-agent uses an absolute or parent-traversing working directory, bypassing root-only validation in bundles.py, to read and write host files as the runner user. | ||||
| CVE-2026-112018 | 1 Jkuhlmann | 1 Cgltf | 2026-10-18 | 7 High |
| cgltf through 1.15 contains a heap out-of-bounds write vulnerability in cgltf_accessor_unpack_floats() that allows attackers to write outside the output buffer via unchecked sparse accessor indices. Attackers can supply a crafted glTF or GLB file with large sparse indices to corrupt heap memory, crash applications, and potentially execute code when cgltf_validate() is not called. | ||||
| CVE-2026-112019 | 1 Jkuhlmann | 1 Cgltf | 2026-10-18 | 6.1 Medium |
| cgltf through 1.15 contains a heap out-of-bounds read vulnerability in cgltf_accessor_unpack_floats() that advances the sparse values cursor by the base bufferView byteStride. Attackers can supply a crafted glTF or GLB file that passes cgltf_validate() to read adjacent heap memory into vertex data or crash applications. | ||||
| CVE-2026-112047 | 2 Hackerbay, Oneuptime | 2 Oneuptime, Oneuptime | 2026-10-18 | 5.4 Medium |
| OneUptime 14.0.2 before 14.0.69 contains an incorrect authorization vulnerability that allows authenticated project members to act on clusters outside their scope by exploiting project-wide permission checks. Attackers can call the AI access test, agent reset, kubectl plan approval and incident AI conversation features to learn agent RBAC permissions, disconnect agents, approve kubectl changes, or run commands on unauthorized resources. | ||||
| CVE-2026-112025 | 1 Light0011 | 1 Cms | 2026-10-18 | 7.3 High |
| A weakness has been identified in light0011 cms c774dce31c6df0055568a8d5c53d964d99be199d/f72cf46f601efb2a0618c3814cc2f61380b38930. This impacts an unknown function of the file App/Home/Controller/UserController.class.php of the component Captcha Validation. Executing a manipulation can lead to improper access controls. The attack can be launched remotely. The exploit has been made available to the public and could be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-98769 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: f_uac1_legacy: validate bRequest index in generic_{set,get}_cmd generic_set_cmd() and generic_get_cmd() use the low nibble of ctrl->bRequest as an index into con->data[]: u8 cmd = (ctrl->bRequest & 0x0F); /* 0 .. 15 */ ... con->data[cmd] = value; /* OOB when cmd >= 5 */ struct usb_audio_control (include/linux/usb/audio.h) declares data as a 5-element array, so indices 5 through 15 write (or read) up to 44 bytes past the end of the array on the heap. A malicious USB host can craft a class-specific SET_CUR / GET_CUR request with an arbitrary bRequest value, triggering the out-of-bounds access from an IRQ completion handler with no further preconditions. Add an ARRAY_SIZE() guard to both functions. | ||||
| CVE-2026-98770 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: midi2: Fix the jack descriptor array sizes The jack in/out descriptor arrays in struct f_midi2_usb_config have the size of MAX_CABLES, which look reasonable -- but it turned out to be incorrect. Namely, the entries for those arrays are added from both inputs and outputs, hence for each loop cycle, it adds two, ended up with as twice as the expected size. This inconsistency may result in potential OOB when a large number of jacks are set up via configfs, although the max number of cables (the loop count) is limited to MAX_CABLES. For addressing it, correct the jack_ins & jack_outs array sizes to twice, MAX_CABLES * 2. | ||||
| CVE-2026-98774 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: rust_binder: cancel deferred work items in thread exit If there are deferred work items on the thread todo list, then they are not cleaned up in the Thread::release() method. Thus, update the code to clean up the work items even if they are deferred. This can happen if the thread dies while it has an active outgoing transaction. | ||||
| CVE-2026-98780 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix IP instance memory leak on kobject add failure amdgpu_discovery_sysfs_ips() allocates ip_hw_instance with kzalloc_flex() and initializes its embedded kobject before calling kobject_add(). If kobject_add() fails, the return value is ignored and execution continues without dropping the initial kobject reference. The failed kobject is not retained in the kset list, so the normal sysfs teardown path cannot find it. As a result, ip_hw_instance_release() is never called and the ip_hw_instance allocation is leaked. Call kobject_put() when kobject_add() fails so the initial reference is dropped and ip_hw_instance_release() can free the allocation. Keep the existing best-effort sysfs behavior by continuing with the remaining IP entries after the failed registration. The issue was identified by a static analysis tool I developed and confirmed by manual review. (cherry picked from commit 5c75fbcca8af1096d8d9415b91d8ea6212c22ee1) | ||||
| CVE-2026-98782 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/mediatek: Fix ovl adaptor platform device leak mtk_drm_probe() creates an OVL adaptor platform device with platform_device_register_data() when the display pipeline requires the OVL adaptor. If a later initialization step fails, the probe error path releases the DRM resources without unregistering the already registered OVL adaptor device. The normal remove path likewise leaves the device registered after the DRM driver is unbound. Keep track of whether the OVL adaptor was successfully registered and unregister it on probe failure. Also recover the platform device from the stored DDP component device and unregister it during normal removal. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||
| CVE-2026-98785 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: check dc_state_create_copy() for NULL in dm_suspend dc_state_create_copy() can return NULL on allocation failure. dm_suspend() only conditionally skips dm_gpureset_toggle_interrupts() and continues execution, returning success. dm_resume() then dereferences the NULL cached_dc_state in link_enc_cfg_copy() and the following dc_state->stream_count loop, crashing during GPU reset recovery. Return -ENOMEM immediately if the copy fails, so the caller aborts suspend instead of leaving a NULL cached state for resume. (cherry picked from commit 84b6d7932fdd2857795a257f9f258562a3cddcab) | ||||
| CVE-2026-98786 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: guard dc_sink dereferences in MST mode validation dm_dp_mst_is_port_support_mode() reads aconnector->dc_sink->dsc_caps... for the DSC branch-throughput check, and get_conv_frl_bw()'s HDMI-PCON FRL-bandwidth path reads aconnector->dc_sink->edid_caps.max_frl_rate, both without a NULL check. dc_sink is cleared asynchronously on MST unplug, and both functions run from paths that the driver's own comments document as racing that teardown: the connector probe worker's ->mode_valid callback and a compositor's atomic check, neither of which holds the MST manager lock that the teardown path uses. The former does have an existing dsc_aux NULL check, but dsc_aux isn't reliably cleared in every path that clears dc_sink, so it doesn't cover this. Fail the port-support check and skip the FRL conversion path when the sink is already gone. (cherry picked from commit 7c3db8da4e039698ae198c870712428644e965c7) | ||||
| CVE-2026-98800 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Wait for an RCU tasks grace period before freeing trampoline progs When a prog is detached from a trampoline, it is freed after an RCU grace period, or an RCU tasks trace one if it is sleepable. This covers the tasks that are running the prog, since the prog's enter helper takes the matching read lock before the prog is called. On a preemptible kernel, it doesn't cover a task that was preempted in the trampoline just before the enter helper. That task holds no lock yet, and it calls the prog after it was freed: BUG: KASAN: vmalloc-out-of-bounds in __bpf_prog_enter_recur+0x3a5/0x3f0 Read of size 8 at addr ffffc90000055040 by task candidate/110 CPU: 1 UID: 0 PID: 110 Comm: candidate Not tainted 7.3.0-rc2-00014-g15071f2a1263-dirty #2 PREEMPT(full) Call Trace: <TASK> __bpf_prog_enter_recur+0x3a5/0x3f0 bpf_trampoline_6442509193+0x37/0xf1 __x64_sys_futex+0x9/0x410 do_syscall_64+0xb0/0x530 ... Wait for an RCU tasks grace period before the existing one when freeing a prog that was linked to a trampoline. An RCU tasks grace period only ends once the tasks that were preempted have run again, and bpf_tramp_image_put() already relies on it to free the image. It doesn't wait for tasks that sleep in the trampoline, the next commit takes care of those. Only progs that were linked to a trampoline can be called this way, so bpf_trampoline_add_prog() marks them and other progs are still freed as before. | ||||
| CVE-2026-98802 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: seg6: ensure packet data is writable before modifying SRH and IPv6 DA advance_nextseg() modifies the SRH Segments Left field and the IPv6 destination address without ensuring the packet data is writable. seg6_next_csid_advance_arg() has the same problem when it advances the NEXT-C-SID argument in the destination address. The skb may be cloned, for example by an AF_PACKET socket receiving on the ingress device. advance_nextseg() and seg6_next_csid_advance_arg() then write into the packet data shared with the clone. A read from that socket can return the modified packet instead of the received one. The simplified path below shows this for advance_nextseg(): __netif_receive_skb_one_core __netif_receive_skb_core deliver_skb [orig: users=2, cloned=0] packet_rcv skb_clone clone queued to the AF_PACKET socket consume_skb(orig) [orig: users=1, cloned=1] ipv6_rcv ip6_rcv_core skb_share_check: no-op [orig: users=1] [...] input_action_end_core advance_nextseg writes into the data shared with the clone Call skb_ensure_writable() in advance_nextseg() and in seg6_next_csid_advance_arg() before they modify the packet data. skb_ensure_writable() may reallocate skb->head, which invalidates the pointers into the packet data taken before the call. advance_nextseg() now returns a valid SRH pointer, or NULL if skb_ensure_writable() fails. seg6_next_csid_advance_arg() takes the pointer to the destination address from the skb after skb_ensure_writable(). On failure, the callers drop the packet with SKB_DROP_REASON_NOMEM. | ||||
| CVE-2026-98804 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: page_pool: fix use-after-free in page_pool_recycle_ring_bulk() With CONFIG_PAGE_POOL_STATS=y, page_pool_recycle_ring_bulk() updates the recycle stats after dropping the producer lock. If it just recycled the last inflight netmems of a pool being destroyed, page_pool_release() can pass its producer-lock barrier and free the pool before recycle_stat_add() runs. Commit fcc680a647ba7 ("page_pool: allow mixing PPs within one bulk") moved this stat update after the unlock. Commit 271683bb2cf32 ("page_pool: Fix use-after-free in page_pool_recycle_in_ring") later added the barrier, but only fixed page_pool_recycle_in_ring(). Move the update back under the lock. | ||||