Export limit exceeded: 381683 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (381683 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-70941 | 1 Oracle | 1 Payroll | 2026-08-22 | 8.8 High |
| Vulnerability in the Oracle Payroll product of Oracle E-Business Suite (component: Internal Operations). Supported versions that are affected are 12.2.3-12.2.15. Easily exploitable vulnerability allows low privileged attacker with logon to the infrastructure where Oracle Payroll executes to compromise Oracle Payroll. While the vulnerability is in Oracle Payroll, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Oracle Payroll. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:L/AC:L/PR:L/UI:N/S:C/C:H/I:H/A:H). | ||||
| CVE-2026-70943 | 1 Oracle | 1 Hyperion Financial Management | 2026-08-22 | 8.1 High |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Oracle Hyperion Financial Management executes to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized creation, deletion or modification access to critical data or all Oracle Hyperion Financial Management accessible data as well as unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 8.1 (Confidentiality and Integrity impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:N). | ||||
| CVE-2026-70954 | 1 Oracle | 1 Commerce Platform | 2026-08-22 | 9.8 Critical |
| Vulnerability in the Oracle Commerce Platform product of Oracle Commerce (component: Dynamo Application Framework). The supported version that is affected is 11.4.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Commerce Platform. Successful attacks of this vulnerability can result in takeover of Oracle Commerce Platform. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-71064 | 1 Oracle | 2 Database - Portable Clusterware, Database Server | 2026-08-22 | 9.6 Critical |
| Vulnerability in the Portable Clusterware component of Oracle Database Server. Supported versions that are affected are 19.3-19.32, 21.3-21.23 and 23.4.0-23.26.3. Easily exploitable vulnerability allows unauthenticated attacker with access to the physical communication segment attached to the hardware where the Portable Clusterware executes to compromise Portable Clusterware. While the vulnerability is in Portable Clusterware, attacks may significantly impact additional products (scope change). Successful attacks of this vulnerability can result in takeover of Portable Clusterware. CVSS 3.1 Base Score 9.6 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:A/AC:L/PR:N/UI:N/S:C/C:H/I:H/A:H). | ||||
| CVE-2026-71067 | 1 Oracle | 1 Agile Plm Mcad Connector | 2026-08-22 | 8.8 High |
| Vulnerability in the Oracle Agile PLM MCAD Connector product of Oracle Supply Chain (component: CAX Client). The supported version that is affected is 3.6. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Agile PLM MCAD Connector. Successful attacks of this vulnerability can result in takeover of Oracle Agile PLM MCAD Connector. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-77002 | 2026-08-22 | N/A | ||
| The SmilePass Selfie Login WordPress plugin through 1.0.2 does not perform any server-side verification of the identity it is asked to authenticate, allowing unauthenticated users to log in as any registered account, including administrators. | ||||
| CVE-2026-77001 | 2026-08-22 | N/A | ||
| The Social Login & Sharing buttons with Analytics By SoClever WordPress plugin through 1.2.0 does not perform any authentication, authorisation or nonce checks in one of its publicly accessible login handlers, allowing unauthenticated attackers to obtain a valid session as any existing user, including administrators. In the default case a session as the site's original administrator account is obtained without needing to know any account details at all. | ||||
| CVE-2026-77000 | 2026-08-22 | N/A | ||
| The WP Social Media Login WordPress plugin through 1.0.6 does not verify that a social login was actually completed with the identity provider before authenticating a visitor, allowing unauthenticated attackers to log in as any existing user, including administrators, by supplying that user's email address. | ||||
| CVE-2026-76793 | 2026-08-22 | N/A | ||
| The Firebase Authentication WordPress plugin before 1.7.1 does not require the email address in an authentication token to be verified before matching it to a WordPress account and issuing a session, allowing unauthenticated attackers to log in as any user, including administrators. | ||||
| CVE-2026-76789 | 2026-08-22 | N/A | ||
| The Slider Hero with Video Background, Animation WordPress plugin before 9.1.3 does not have authorisation and nonce checks on two of its request handlers, and does not escape a stored setting before outputting it, allowing unauthenticated users to store malicious JavaScript which will be executed in the context of an administrator viewing the Slider Hero with Video Background, Animation WordPress plugin before 9.1.3's admin area, as well as any visitor of a page embedding a slider. | ||||
| CVE-2026-16738 | 2026-08-22 | N/A | ||
| The Conekta Payment Gateway WordPress plugin before 6.2.2 does not verify the authenticity of incoming payment gateway webhook notifications, nor bind the confirmed payment to the targeted order or verify its amount, allowing unauthenticated attackers to mark arbitrary orders as paid without payment. | ||||
| CVE-2026-14187 | 2026-08-22 | N/A | ||
| The Tutor LMS WordPress plugin before 4.0.6 does not enforce per-object ownership checks on its course content type, allowing any user with the instructor role to read the content of private courses belonging to other instructors. | ||||
| CVE-2026-72360 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays Currently defined VF/PF relay actions use regular REQUEST messages only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT messages as this would result in breaking the VFPF ABI protocol and also might trigger an assert on the PF side. (cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) | ||||
| CVE-2026-72367 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: iomap: guard io_size EOF trim against concurrent truncate underflow iomap: fix zero padding data issue in concurrent append writes changed ioend accounting so that io_size tracks only valid data within EOF. This trims io_size when a writeback range extends past end_pos: ioend->io_size += map_len; if (ioend->io_offset + ioend->io_size > end_pos) ioend->io_size = end_pos - ioend->io_offset; However, if end_pos ends up below ioend->io_offset, the subtraction becomes negative and is stored in size_t io_size, causing an unsigned wrap to a huge value. This can happen when writeback continues past byte-level EOF up to a block-aligned range, or when a concurrent truncate shrinks the file after end_pos was sampled in iomap_writeback_handle_eof(). A wrapped io_size can mislead append detection and corrupt completion-time size handling, since filesystem end_io paths consume io_size for decisions such as on-disk EOF updates and unwritten/COW completion ranges. Fix this by clamping io_size to zero when EOF has moved to or before the ioend start offset. This preserves the original intent of trimming io_size to valid in-EOF data while avoiding the underflow. | ||||
| CVE-2026-72368 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: cachefiles: Fix double unlock in nomem_d_alloc error path When start_creating() fails and returns -ENOMEM, it has already released the parent directory lock in __start_dirop(): static struct dentry *__start_dirop(...) { ... inode_lock_nested(dir, I_MUTEX_PARENT); dentry = lookup_one_qstr_excl(name, parent, lookup_flags); if (IS_ERR(dentry)) inode_unlock(dir); <-- Lock released on error return dentry; } However, the nomem_d_alloc error path in cachefiles_get_directory() unconditionally calls inode_unlock(d_inode(dir)) again, causing a double unlock that corrupts the rwsem state. This is a leftover from commit 7ab96df840e60 which replaced manual locking with start_creating() but failed to update the nomem_d_alloc path (while correctly updating mkdir_error and lookup_error paths). | ||||
| CVE-2026-72369 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: minix: avoid overflow in bitmap block count calculation minix_check_superblock() uses minix_blocks_needed() to verify that the on-disk imap and zmap block counts are large enough for the advertised inode and zone counts. The helper currently performs DIV_ROUND_UP() in unsigned int arithmetic. A Minix v3 image can set s_ninodes or s_zones near UINT_MAX so the addition inside DIV_ROUND_UP() wraps to zero. That makes a zero imap/zmap block count look valid, after which minix_fill_super() can dereference s_imap[0] or s_zmap[0] even though no bitmap buffers were allocated. Impact: mounting a crafted Minix v3 image whose s_ninodes or s_zones is near UINT_MAX makes minix_check_superblock() accept a zero bitmap-block count and minix_fill_super() dereference s_imap[0]/s_zmap[0], panicking the kernel. The divisor is the bitmap capacity in bits, blocksize * 8, which is always a power of two: minix_fill_super() obtains the block size through sb_set_blocksize(), and blk_validate_block_size() rejects any size that is not a power of two. Use DIV_ROUND_UP_POW2(), which divides before adding the round-up term and so cannot overflow for a power-of-two divisor. | ||||
| CVE-2026-72371 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix the volume AFS_VOLUME_RM_TREE is set on Fix afs_insert_volume_into_cell() to set AFS_VOLUME_RM_TREE on the volume replaced, not the new volume, as it's now removed from the cell's volume tree. This will cause the old volume to be removed from the tree twice and the new volume never to be removed. | ||||
| CVE-2026-72395 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: hwmon: (pmbus) Fix passing events to regulator core Sashiko reports: Commit 754bd2b4a084 ("hwmon: (pmbus/core) Protect regulator operations with mutex") introduced a worker to batch regulator events over time using atomic_or(). The delayed worker then passes the combined bitmask unmodified to regulator_notifier_call_chain(). The core regulator subsystem's regulator_handle_critical() function evaluates the event parameter using a strict switch statement. If multiple distinct faults occur before the worker runs (e.g., REGULATOR_EVENT_UNDER_VOLTAGE | REGULATOR_EVENT_OVER_CURRENT), the combined bitmask fails to match any case. This leaves the reason as NULL and completely bypasses the critical hw_protection_trigger(). Fix the problem by passing events bit by bit to the regulator event handler. | ||||
| CVE-2026-72405 | 1 Linux | 1 Linux Kernel | 2026-08-22 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: udp_tunnel: prevent double queueing in udp_tunnel_nic_device_sync Yue Sun reported a use-after-free and debugobjects warning in udp_tunnel_nic_device_sync_work() during concurrent device operations. The workqueue core clears the internal pending bit before invoking the worker. At that point, a concurrent thread can queue the work again. When the already running worker eventually clears the work_pending flag to 0, it mistakenly clears the flag for the newly queued instance. udp_tunnel_nic_unregister() then observes work_pending as 0 and frees the structure while the second work item is still active in the queue, leading to UAF. Fix this by returning early in udp_tunnel_nic_device_sync() if work_pending is already set, preventing redundant work queueing. | ||||
| CVE-2026-70956 | 1 Oracle | 1 Hyperion Infrastructure Technology | 2026-08-22 | 8.8 High |
| Vulnerability in the Oracle Hyperion Infrastructure Technology product of Oracle Hyperion (component: Installation and Configuration). The supported version that is affected is 11.2.25.0.000. Easily exploitable vulnerability allows low privileged attacker with network access via HTTP to compromise Oracle Hyperion Infrastructure Technology. Successful attacks of this vulnerability can result in takeover of Oracle Hyperion Infrastructure Technology. CVSS 3.1 Base Score 8.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H). | ||||