Export limit exceeded: 378474 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378474 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378474 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72048 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: ca8210: fix cas_ctl leak on spi_async failure ca8210_spi_transfer() allocates cas_ctl with kzalloc_obj(GFP_ATOMIC) and relies entirely on the SPI completion callback ca8210_spi_transfer_complete() to free it. The spi_async() API only invokes the completion callback on successful submission. On failure it returns a negative error code without ever queuing the callback, which leaves cas_ctl and its embedded spi_message and spi_transfer orphaned. Every kfree(cas_ctl) in the driver is inside the completion callback, so there is no other reclamation path. ca8210_spi_transfer() is called from ca8210_spi_exchange(), the interrupt handler ca8210_interrupt_handler(), and from the retry path inside the completion callback itself. The exchange and interrupt handler paths loop on -EBUSY, so under sustained SPI bus contention every retry iteration leaks a fresh cas_ctl (~600 bytes per occurrence). Fix it by freeing cas_ctl on the spi_async() error path. While here, correct the misleading error string: the function calls spi_async(), not spi_sync(). | ||||
| CVE-2026-72058 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: ixp4xx_hss: fix duplicate HDLC netdev allocation ixp4xx_hss_probe() allocates two HDLC netdevs. The first one is stored in ndev, initialized, and registered with register_hdlc_device(). The second one is stored in port->netdev and later used by the remove path for unregister_hdlc_device() and free_netdev(). This means that the registered netdev is not the same object that is unregistered and freed on remove. It also leaks the first allocation if the second alloc_hdlcdev() call fails, and the first allocation is not checked before ndev is used. Older code allocated the HDLC netdev only once and stored the same object in both the local variable and port->netdev. The buggy conversion split this into two alloc_hdlcdev() calls. A later rename changed the local variable name to ndev, but the underlying mismatch remained. Fix this by allocating the HDLC netdev only once and assigning the same object to port->netdev. | ||||
| CVE-2026-72059 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: wwan: t7xx: destroy DMA pool on CLDMA late init failure t7xx_cldma_late_init() creates md_ctrl->gpd_dmapool before initializing the TX and RX rings. If any ring initialization fails, the error path frees the already initialized rings but leaves the DMA pool allocated. Destroy md_ctrl->gpd_dmapool on the late-init failure path to avoid leaking the DMA pool. | ||||
| CVE-2026-72073 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mmc: vub300: fix use-after-free on probe failure The vub300 driver lifetime-manages its controller state using vub300->kref, with vub300_delete() freeing the mmc host when the last reference is dropped. The probe error path after the inactivity timer has been armed still bypasses that lifetime rule, however, and falls through to mmc_free_host() directly if mmc_add_host() fails. The race window is between arming the inactivity timer and reaching the probe error unwind after mmc_add_host() fails: probe thread timer/workqueue ------------ --------------- kref_init(&vub300->kref) ref = 1 kref_get(&vub300->kref) ref = 2, timer ref add_timer(inactivity_timer) fires after one second | | race window |<----------------------------------------------------> | mmc_add_host(mmc) inactivity timer fires vub300_queue_dead_work() kref_get() ref = 3 queue_work(deadwork) mmc_add_host() fails timer_delete_sync() mmc_free_host(mmc) frees vub300 deadwork runs use-after-free The inactivity timeout is one second, so this would require mmc_add_host() to both fail and take more than one second to do so. This is unlikely to happen in practice, but the error path is still wrong. timer_delete_sync() only waits for the timer callback itself. It does not flush deadwork that the callback may already have queued. As a result, queued deadwork can still hold a kref while the probe error path directly frees the backing mmc host, including the vub300 storage. Fix this by using the same lifetime mechanism as disconnect. Clear vub300->interface so that the timer callback and any queued deadwork return early and drop their references, then drop the initial probe reference and return without falling through to err_free_host. | ||||
| CVE-2026-72077 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix firmware leak in async update The firmware object was not being released if validation failed. Use __free(firmware) to ensure the firmware is always released. | ||||
| CVE-2026-72087 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: lpfc: Fix memory leak in lpfc_sli4_driver_resource_setup() The memory allocated for mboxq using mempool_alloc() is not freed in some of the early exit error paths. Fix that by moving the mempool_free() call to an earlier point after last use. | ||||
| CVE-2026-72088 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: scsi: hpsa: Fix DMA mapping leak on IOACCEL2 reset path If phys_disk->in_reset is set, the function returns directly without undoing the resources acquired for the command. Add the missing error cleanup by unmapping the IOACCEL2 SG chain block when needed, unmapping the SCSI command, and dropping the outstanding IOACCEL command count before returning. | ||||
| CVE-2026-72101 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix leaking uninitialized kernel memory If hash size is less than device's tuple size, dm-integrity is supposed to zero the remaining space. There was a bug in the code that zeroing didn't work. This commit fixes it. | ||||
| CVE-2026-72104 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-pcache: reject option groups without values The pcache target parses optional arguments as name/value pairs. A table that advertises one optional argument and supplies only a recognized option name, for example "cache_mode", reaches parse_cache_opts() with argc == 1. The parser consumes the name, decrements argc to zero, then calls dm_shift_arg() again for the value. dm_shift_arg() returns NULL when no arguments remain, and the following strcmp() dereferences that NULL pointer. Check that each recognized option has a value before consuming it. This keeps valid "cache_mode writeback" and "data_crc true/false" tables unchanged while making malformed tables fail during target construction with a precise missing-value error. | ||||
| CVE-2026-72106 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-ioctl: fix a possible overflow in list_version_get_info sizeof(tt->version) is 12 bytes, but the code writes 16 bytes into the output buffer - info->vers->version[0], info->vers->version[1], info->vers->version[2] and info->vers->next. This can cause buffer overflow. Fix this buffer overflow by replacing "sizeof(tt->version)" with "sizeof(struct dm_target_versions)". | ||||
| CVE-2026-72168 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix fault in unaligned fixup Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs, instead of kmalloc_obj() / kmalloc_objs() to prevent access to uninitialized data. Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at mtd_get_fact_prot_info. | ||||
| CVE-2026-72178 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/core: always put unsuccessfully committed target pids damon_commit_target() puts and gets the destination and the source target pids. It puts the destination target pid because it will be overwritten by the source target pid. It gets the source pid because the caller is supposed to eventually put the pids. In more detail, the caller will call damon_destroy_ctx() after damon_commit_ctx() to destroy the entire source context. And in this case, [f]vaddr operation set's cleanup_target() callback will put the pids. The commit operation is made at the context level. The operation can fail in multiple places including in the middle and after the targets commit operations. For any such failures, immediately the error is returned to the damon_commit_ctx() caller. If some or all of the source target pids were committed to the destination during the unsuccessful context commit attempt, those pids should be put twice. The source context will do the put operations using the above explained routine. However, let's suppose the destination context was not originally using [f]vaddr operation set and the commit failed before the ops of the source context is committed. The destination does not have the cleanup_target() ops callback, so it cannot put the pids via the damon_destroy_ctx(). As a result, the pids are leaked. The issue in the real world would be not very common. The commit feature is for changing parameters of running DAMON context while inheriting internal status like the monitoring results. The monitoring results of a physical address range ain't have things that are beneficial to be inherited to a virtual address ranges monitoring. So the problem-causing DAMON control would be not very common in the real world. That said, it is a supported feature. And damon_commit_target() failure due to memory allocation is relatively realistic [1] if there are a huge number of target regions. Fix by putting the pids in the commit operation in case of the failures. The issue was discovered [2] by Sashiko. | ||||
| CVE-2026-72218 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file refcount leak on cached nlm_do_fopen() failure The cached-file path in nlm_lookup_file() reaches the found: label unconditionally, even when nlm_do_fopen() fails. At that label *result and file->f_count are updated before the error is returned. The wrappers nlm3svc_lookup_file() and nlm4svc_lookup_file() then bail out of their switch without copying *result back to their caller, so the proc handler's local nlm_file pointer remains NULL and the cleanup path skips nlm_release_file(). The f_count increment is never released, and nlm_traverse_files() can no longer reap the file because its refcount never returns to zero between requests. Short-circuit the cached path so neither *result nor f_count is touched when nlm_do_fopen() fails on a hashed nlm_file. | ||||
| CVE-2026-72224 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: nvdimm/btt: Free arenas on btt_init() error paths The arenas allocated by discover_arenas() or create_arenas() are not freed on some error paths in btt_init(). This leaks memory when BTT initialization fails. Call free_arenas() from the affected error paths to release the allocations. [ as: commit message and log edits ] | ||||
| CVE-2026-72269 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: uvesafb: fix potential memory leak in uvesafb_probe() Due to an incorrect goto label, memory allocated for modedb and modelist in uvesafb_vbe_init() is not freed in some error paths. Fix this by updating the goto label. | ||||
| CVE-2026-72240 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||
| CVE-2026-72267 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: carminefb: fix potential memory leak in alloc_carmine_fb() The memory allocated for modelist in fb_videomode_to_modelist() is not freed in the subsequent error path. Fix that by calling fb_destroy_modelist() | ||||
| CVE-2026-72300 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: validate vendor array size before parsing sof_parse_token_sets() reads array->size while iterating over topology private data. The loop condition only checks that some data remains, so a malformed topology with a truncated trailing vendor array can make the parser read the size field before a full vendor-array header is available. Validate that the remaining private data contains a complete snd_soc_tplg_vendor_array header before reading array->size. The declared array size check also needs to remain signed. asize is an int, but sizeof(*array) has type size_t, so comparing them directly promotes negative asize values to unsigned and lets them pass the check, as reported in the stable review thread reference below. Cast sizeof(*array) to int when validating the declared array size. This rejects negative, zero and otherwise too-small sizes before the parser dispatches to the tuple-specific code. | ||||
| CVE-2026-72316 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm era: fix NULL pointer dereference in metadata_open() metadata_open() returns NULL when kzalloc_obj() fails, but the caller era_ctr() only checks IS_ERR(md). Since IS_ERR(NULL) returns false, the NULL pointer is treated as a valid result and later assigned to era->md, leading to a NULL pointer dereference when the metadata is accessed. Fix this by returning ERR_PTR(-ENOMEM) on allocation failure, consistent with dm-cache-metadata.c, dm-thin-metadata.c, and dm-clone-metadata.c which all use ERR_PTR(-ENOMEM) for the same pattern. | ||||
| CVE-2026-72332 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Prevent PM resume deadlock in hwctx_sync_debug_bo() amdxdna_hwctx_sync_debug_bo() invokes the hardware hwctx_sync_debug_bo() callback while holding xdna->dev_lock. The callback may call amdxdna_cmd_submit(), which in turn calls amdxdna_pm_resume_get(). If the device is suspended, amdxdna_pm_resume_get() may synchronously execute amdxdna_pm_resume(), which also acquires xdna->dev_lock, resulting in a deadlock. Avoid the deadlock by calling amdxdna_pm_resume_get() before holding xdna->dev_lock in both amdxdna_hwctx_sync_debug_bo() and amdxdna_drm_config_hwctx_ioctl() | ||||