Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 378800 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378800 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72408 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 10 Critical |
| In the Linux kernel, the following vulnerability has been resolved: geneve: gate GRO hint in geneve_gro_complete() on gs->gro_hint geneve_gro_receive() reads the GRO hint through geneve_sk_gro_hint_off(), which honours it only when the socket enabled IFLA_GENEVE_GRO_HINT (gs->gro_hint). geneve_gro_complete() instead calls the low-level geneve_opt_gro_hint_off() and acts on the hint unconditionally. On a tunnel without the hint, receive aggregates the frames as plain ETH_P_TEB while complete still honours an attacker-supplied hint option: it inflates gh_len by gro_hint->nested_hdr_len (u8) and redirects the dispatch type, so the inner gro_complete handler runs at nhoff + gh_len, an offset receive never pulled nor validated, reading out of bounds of the skb head: BUG: KASAN: slab-out-of-bounds in ipv6_gro_complete (net/ipv6/ip6_offload.c:196) Read of size 1 at addr ffff88800fe91980 by task exploit/153 ipv6_gro_complete (net/ipv6/ip6_offload.c:196) geneve_gro_complete (drivers/net/geneve.c:965) udp_gro_complete (net/ipv4/udp_offload.c:940) inet_gro_complete (net/ipv4/af_inet.c:1621) __gro_flush (net/core/gro.c:306) Gate the complete path on gs->gro_hint too via geneve_sk_gro_hint_off(), so both paths agree. Tunnels that enable the hint are unaffected. | ||||
| CVE-2026-72415 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SDCA: Validate written enum value in ge_put_enum_double() ge_put_enum_double() passes the user-supplied enumeration index item[0] to snd_soc_enum_item_to_val() without checking it against the number of items in the enum: ret = snd_soc_enum_item_to_val(e, item[0]); snd_soc_enum_item_to_val() indexes the heap-allocated e->values[] array with that index (e->values is set from a devm_kcalloc() of e->items entries), so a control write with an out-of-range item[0] reads past the end of the values buffer. The bounds check in snd_soc_dapm_put_enum_double() only runs afterwards, so it does not prevent the read here. Reject an out-of-range item before using it, matching the other enum put handlers. This issue was pointed out by the Sashiko AI review bot while reviewing a related enum-validation series: https://lore.kernel.org/all/20260609125735.CEB651F00893@smtp.kernel.org/ | ||||
| CVE-2026-72418 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: prevent connlimit drops for early confirmed ct Commit 69894e5b4c5e ("netfilter: nft_connlimit: update the count if add was skipped") introduced a regression where packets for valid connections are dropped when using connlimit for soft-limiting scenarios. The issue occurs when a new connection reuses a socket currently in the TIME_WAIT state. In this scenario, the connection tracking entry is evaluated as already confirmed. Previously, __nf_conncount_add() assumed that if a connection was confirmed and did not originate from the loopback interface, it should skip the addition and return -EEXIST. Skipping the addition triggers a garbage collection run that cleans up the TIME_WAIT connection. Consequently, the active connection count drops to 0, which xt_connlimit mishandles, leading to the false rejection of the perfectly valid new connection. Fix this by replacing the interface check with protocol-agnostic state checks. We now skip the tree insertion and preserve the lockless garbage collection optimization only if the connection is IPS_ASSURED. This allows early-confirmed setup packets (such as reused TIME_WAIT sockets or locally generated SYN-ACKs) to be properly evaluated and counted without falsely dropping. The goto check_connections path is maintained to ensure these setup packets are deduplicated correctly. This has been tested with slowhttptest and HTTP server configured locally to ensure we are not breaking soft-limiting scenarios for local or external connections. In addition, it was tested with a OVS zone limit too. | ||||
| CVE-2026-72438 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid10: fix writes_pending and barrier reference leaks on discard failures raid10_make_request() acquires a writes_pending reference with md_write_start() before calling raid10_handle_discard(). Several failure paths in raid10_handle_discard() complete the bio and return without releasing the corresponding reference, causing md_write_end() to be skipped. Call md_write_end() before returning from these failure paths to keep writes_pending accounting balanced. Additionally, discard split allocation failures can occur after wait_barrier() succeeds. Those paths return without calling allow_barrier(), leaking the associated barrier reference. Release the barrier before returning from those paths. | ||||
| CVE-2026-18097 | 1 Ibm | 1 Db2 | 2026-08-17 | 5.5 Medium |
| IBM Db2 11.5.0 through 11.5.9, and 12.1.0 through 12.1.5 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow a local attacker to obtain sensitive information due to the logging of plain text passwords in trace files. | ||||
| CVE-2026-66270 | 1 Dell | 1 Wyse Management Suite | 2026-08-17 | 7.2 High |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Unrestricted Upload of File with Dangerous Type vulnerability. A high privileged attacker with remote access could potentially exploit this vulnerability, leading to Remote Code Execution. | ||||
| CVE-2026-48595 | 1 Elixir-tesla | 1 Tesla | 2026-08-17 | 5.9 Medium |
| Improper Handling of Case Sensitivity vulnerability in elixir-tesla tesla allows credential leakage to a third-party origin on cross-origin redirects. Tesla.Middleware.FollowRedirects strips security-sensitive headers on cross-origin redirects using a case-sensitive string comparison against a lowercase filter list (@filter_headers ["authorization", "host"]). HTTP header names are case-insensitive per RFC 7230, but Tesla preserves header keys verbatim as supplied by the caller without normalizing case. A header set as {"Authorization", "Bearer …"} (the RFC 7235 canonical casing used by virtually all HTTP libraries and documentation) does not match the lowercase filter entry and is forwarded to the redirect destination. An attacker who can control or influence a Location: response seen by the client (via their own endpoint, a redirect-open upstream, or a compromised origin) receives the bearer token or other Authorization material on the cross-origin request. This issue affects tesla: from 1.4.0 before 1.18.3. | ||||
| CVE-2026-71693 | 2026-08-17 | N/A | ||
| DO NOT USE THIS CVE RECORD. ConsultIDs: none. Reason: This record was withdrawn by its CNA. Further investigation showed that it was not a security issue. Notes: none. | ||||
| CVE-2026-72120 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing rcu list annotations and operations sashiko-bot remarked the missing use of list_add_rcu() in bcm_[rx|tx]_setup() to have a proper initialized bcm_op structure when bcm_proc_show() traverses the bcm_op's under rcu_read_lock(). To cover all initial settings of the bcm_op's the list_add_rcu() calls are moved to the end of the setup code. While at it, also fix the mirroring removal side: bcm_release() called bcm_remove_op() - which frees the op via call_rcu() - on ops that were still linked in bo->tx_ops/bo->rx_ops, without list_del_rcu() first. Unlink each op with list_del_rcu() before handing it to bcm_remove_op(), matching the existing pattern in bcm_delete_tx_op()/bcm_delete_rx_op(). | ||||
| CVE-2026-72136 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink xfrmi_changelink() operates on at most two netns, dev_net(dev) and the interface link netns xi->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in xi->net can rewrite an interface that lives in xi->net. Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top, before any attribute is parsed. | ||||
| CVE-2026-72185 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix WARN_ON for resident attribute in ntfs_map_runlist_nolock() When ntfs_map_runlist_nolock() needs to look up the attribute extent containing a target VCN (ctx_needs_reset == true), it calls ntfs_attr_lookup() and then expects the result to be a non-resident attribute, since only non-resident attributes have a mapping pairs array to decompress. A crafted NTFS image can place a resident attribute where a non-resident one is expected, causing ntfs_attr_lookup() to succeed but return a resident attribute record. Previously this was caught only by a WARN_ON(), which does not stop execution. The code then falls through to read a->data.non_resident.highest_vcn from what is actually a resident attribute, accessing the wrong union member and corrupting the VCN range check. The caller path triggering this warning during mount is: ntfs_map_runlist_nolock ntfs_empty_logfile load_system_files ntfs_fill_super In this path ctx is NULL, so ntfs_map_runlist_nolock() allocates a temporary search context internally and sets ctx_needs_reset = true. The existing resident-attribute guard in the ctx != NULL branch already returns -EIO silently for the same condition; make the ctx_needs_reset path consistent by replacing the WARN_ON() with the same -EIO error return. This causes the crafted image to be rejected with a mount error instead of triggering a kernel warning. | ||||
| CVE-2026-72186 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: make system files immutable to prevent corruption When a system file such as $Bitmap is exposed via show_sys_files and written from userspace, the volume is corrupted and, because the cluster allocator scans $Bitmap through the same inode's page cache, a write to $Bitmap also deadlocks writeback against the folio it already holds locked. These files are maintained by the driver itself and have no valid reason to be written through the file interface. Mark base metadata files (mft_no < FILE_first_user) as immutable during inode read so the VFS rejects write, mmap, truncate and unlink with -EPERM. Directories are skipped so the root and $Extend remain usable. Internal metadata updates do not go through the VFS write path and are unaffected. | ||||
| CVE-2026-72188 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name() ntfs_lookup_inode_by_name() returns MFT references read from directory index entries on disk. These values are untrusted, but the function can currently return an error-marked MFT reference to its callers without validating it. Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image can set the MREF error bit while leaving the low bits as an arbitrary value, causing callers to consume a bogus pseudo-errno instead of treating the lookup result as corrupted on-disk metadata. Fix this at the source by normalizing every error-marked MFT reference returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to all four directory lookup return paths so every caller gets a validated result without needing additional checks or an API change. This keeps the sanitization in the common lookup helper, which is cleaner than duplicating validation in each caller. | ||||
| CVE-2026-13700 | 2026-08-17 | 5.9 Medium | ||
| The WooMS WordPress plugin through 9.14 does not validate a user-supplied URL before using it in a server-side request and attaches stored third-party integration credentials to every such request, allowing unauthenticated attackers to perform Server-Side Request Forgery and to disclose the configured integration credentials when the relevant data-sync feature is enabled. | ||||
| CVE-2026-75046 | 1 Jetbrains | 1 Youtrack | 2026-08-17 | 4.3 Medium |
| In JetBrains YouTrack before 2026.2.18112 an authenticated user could enumerate accounts via the users search endpoint | ||||
| CVE-2026-68517 | 1 Nicolargo | 1 Glances | 2026-08-17 | 6.5 Medium |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, the cors_origins guard in glances/outputs/glances_restful_api.py uses exact list equality instead of wildcard membership, allowing a multi-origin list containing the wildcard to retain cors_credentials and expose authenticated REST API data to an untrusted website visited by a previously authenticated user. This issue is fixed in 4.5.6. | ||||
| CVE-2026-68519 | 1 Nicolargo | 1 Glances | 2026-08-17 | N/A |
| Glances is an open-source system cross-platform monitoring tool. Prior to 4.5.6, GlancesActions.run() in glances/actions.py ignores --disable-config-exec for on-alert action commands and invokes secure_popen() with shell operators enabled, allowing configured redirection, command chaining, or pipes to execute when an alert triggers. This issue is fixed in 4.5.6. | ||||
| CVE-2026-74253 | 1 Regularlabs.com | 1 Sourcerer Extension For Joomla | 2026-08-17 | N/A |
| Joomla Extension - regularlabs.com - Unauthenticated RCE through unverified reflected user input in Sourcerer < 14.0.0 - Regular Labs Sourcerer before 14.0.0 processes {source} blocks found in Joomla’s final rendered HTML without reliably determining where that code originated. | ||||
| CVE-2026-64865 | 1 Quantumnous | 1 New-api | 2026-08-17 | N/A |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.16, repeated PUT /api/user/self requests that update language or sidebar_modules can race relay billing because controller/user.go calls User.Update and updateUserCache performs a full RedisHSetObj write to user:.Quota, overwriting concurrent HINCRBY deductions and allowing an authenticated user to keep cached quota artificially high. This issue is fixed in version 1.0.0-rc.16. | ||||
| CVE-2026-73424 | 1 Withastro | 1 Astro | 2026-08-17 | 6.5 Medium |
| Astro is a web framework for content-driven websites. From 10.0.3 until 11.0.3, the Astro Vercel adapter in packages/integrations/vercel/src/serverless/entrypoint.ts accepts x_astro_path for the public /_isr function based only on the x-vercel-isr header, allowing unauthenticated GET requests to render routes protected only by Vercel edge path rules or split edge middleware. This issue is fixed in 11.0.3. | ||||