Export limit exceeded: 21301 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21301 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68309 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68313 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error. | ||||
| CVE-2026-68301 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: hsr: fix memory leak on slave unregistration by removing synced VLANs When an HSR master device is brought UP, it auto-adds VLAN 0 via vlan_vid0_add(), which propagates VID 0 to its slave devices (slave A and B). If a slave device is later unregistered while HSR is active (e.g., during netns cleanup or interface destruction), hsr_del_port() is called to detach the slave port from the HSR master. However, hsr_del_port() currently does not delete the VLAN IDs that were synced to the slave device by HSR. As a result, the slave device retains a refcount on VID 0 (and any other synced VLANs). When the slave device is destroyed, its vlan_info / vlan_vid_info structure remains allocated, leading to a memory leak. Fix this by calling vlan_vids_del_by_dev(port->dev, master->dev) in hsr_del_port() before unlinking slave A or slave B ports, matching the propagation logic in hsr_ndo_vlan_rx_add_vid() / hsr_ndo_vlan_rx_kill_vid() and the cleanup behavior in bonding and team drivers. | ||||
| CVE-2026-68303 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vc4: hvs/v3d: Fix null dereference in unbind The hvs and v3d drivers use dev_get_drvdata(master) in their unbind functions. Since the vc4-drm gets removed before its dependent drivers (vc4_hvs/vc4_v3d) the vc4_hvs_unbind/vc4_v3d_unbind functions try to get drvdata of its master and fails with a null dereference error. Use the data pointer passed to the unbind functions directly instead of dev_get_drvdata(master). This avoids using potentially freed memory. | ||||
| CVE-2026-68304 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: brcmfmac: fix 802.1X-SHA256 call trace warning Based on wpa_auth as 1x_256 mode, need to set up "use_fwsup" with BRCMF_PROFILE_FWSUP_1X. Or it will happen trace warning when call brcmf_cfg80211_set_pmk(). [ 4481.831101] ------------[ cut here ]------------ [ 4481.831102] WARNING: CPU: 1 PID: 2997 at drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c:7242 brcmf_cfg80211_set_pmk+0x77/0xd0 [brcmfmac] [...] [ 4481.831202] Call Trace: [ 4481.831204] <TASK> [ 4481.831205] nl80211_set_pmk+0x183/0x250 [cfg80211] [ 4481.831233] genl_family_rcv_msg_doit+0xea/0x150 [ 4481.831237] genl_rcv_msg+0x104/0x240 [ 4481.831239] ? cfg80211_probe_status+0x2c0/0x2c0 [cfg80211] [ 4481.831257] ? genl_family_rcv_msg_doit+0x150/0x150 [ 4481.831259] netlink_rcv_skb+0x4e/0x100 [ 4481.831261] genl_rcv+0x24/0x40 [ 4481.831262] netlink_unicast+0x236/0x380 [ 4481.831264] netlink_sendmsg+0x250/0x4b0 [ 4481.831266] sock_sendmsg+0x5c/0x70 [ 4481.831269] ____sys_sendmsg+0x236/0x2b0 [ 4481.831271] ? copy_msghdr_from_user+0x6d/0xa0 [ 4481.831272] ___sys_sendmsg+0x86/0xd0 [ 4481.831274] ? avc_has_perm+0x8c/0x1a0 [ 4481.831276] ? preempt_count_add+0x6a/0xa0 [ 4481.831279] ? sock_has_perm+0x82/0xa0 [ 4481.831280] __sys_sendmsg+0x57/0xa0 [ 4481.831282] do_syscall_64+0x38/0x90 [ 4481.831284] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 4481.831286] RIP: 0033:0x7fd270d369b4 | ||||
| CVE-2026-68243 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix NULL deref in I915_CONTEXT_PARAM_SSEU Setting context engine slot N into I915_ENGINE_CLASS_INVALID / I915_ENGINE_CLASS_INVALID_NONE and attempting to apply I915_CONTEXT_PARAM_SSEU to the same slot N will deref NULL. Fix that. Discovered using AI-assisted static analysis confirmed by Intel Product Security. (cherry picked from commit 36eda5b5c2d40da41cc0a5403c26986237cf9e87) | ||||
| CVE-2026-68282 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/rockchip: analogix_dp: Add missing error check for platform_get_resource() Add missing error check for platform_get_resource() return value to prevent NULL pointer dereference when memory resource is not available. | ||||
| CVE-2026-68214 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: rtl2832: fix use-after-free in rtl2832_remove() cancel_delayed_work_sync() is called before i2c_mux_del_adapters() in rtl2832_remove(). While the cancel waits for any running instance of i2c_gate_work to finish, it does not prevent the timer from being rescheduled by a concurrent thread. During probe, the r820t_attach() call attempts I2C transfers through the mux adapter. These transfers go through i2c_mux_master_xfer(), which calls rtl2832_deselect() after the transfer completes, rescheduling i2c_gate_work via schedule_delayed_work(). If this transfer is still in flight when rtl2832_remove() runs, rtl2832_deselect() can reschedule i2c_gate_work after it has been cancelled, causing a use-after-free when kfree(dev) is called. Fix this by calling i2c_mux_del_adapters() before cancel_delayed_work_sync(). Once the mux adapter is unregistered, no new I2C transfers can go through it, so rtl2832_deselect() can no longer reschedule i2c_gate_work. The subsequent cancel_delayed_work_sync() is then guaranteed to be final. | ||||
| CVE-2026-68291 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: idpf: fix max_vport related crash on allocation error during init Set adapter->max_vports only after successful allocation of vports, netdevs and vport_config buffers. This fixes possible crashes on reset or rmmod, following failed allocation on init [ 305.981402] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 305.994464] idpf 0000:83:00.0: Device HW Reset initiated [ 320.416872] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 320.416918] #PF: supervisor read access in kernel mode [ 320.416942] #PF: error_code(0x0000) - not-present page [ 320.416963] PGD 2099657067 P4D 0 [ 320.416983] Oops: Oops: 0000 [#1] SMP NOPTI ... [ 320.417093] RIP: 0010:idpf_remove+0x118/0x200 [idpf] [ 320.417130] Code: 8b bb 98 09 00 00 e8 17 0f 5b e5 48 8b bb e8 08 00 00 e8 0b 0f 5b e5 66 83 bb 28 06 00 00 00 48 8b bb 20 06 00 00 74 49 31 ed <48> 8b 04 ef 48 85 c0 74 2f 48 8b 78 20 e8 66 58 91 e5 48 8b 83 20 [ 320.417183] RSP: 0018:ff7322212903fdb8 EFLAGS: 00010246 [ 320.417205] RAX: 0000000000000000 RBX: ff4463de40300000 RCX: ff7322212903fd4c [ 320.417228] RDX: 0000000000000001 RSI: ffffffffa7f7d100 RDI: 0000000000000000 [ 320.417250] RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000 [ 320.417272] R10: 0000000000000001 R11: ff4463de3a638f58 R12: ff4463be89ac7000 [ 320.417294] R13: ff4463be89ac7198 R14: ff4463be94fc7198 R15: ffffffffc0f10f20 [ 320.417317] FS: 00007f963c0e6740(0000) GS:ff4463fdd65d8000(0000) knlGS:0000000000000000 [ 320.417342] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 320.417362] CR2: 0000000000000000 CR3: 00000020ba674002 CR4: 0000000000773ef0 [ 320.417385] PKRU: 55555554 [ 320.417398] Call Trace: [ 320.417412] <TASK> [ 320.417429] pci_device_remove+0x42/0xb0 [ 320.417459] device_release_driver_internal+0x1a9/0x210 [ 320.417492] driver_detach+0x4b/0x90 [ 320.417516] bus_remove_driver+0x70/0x100 [ 320.417539] pci_unregister_driver+0x2e/0xb0 [ 320.417564] __do_sys_delete_module.constprop.0+0x190/0x2f0 [ 320.417592] ? kmem_cache_free+0x31e/0x550 [ 320.417619] ? lockdep_hardirqs_on_prepare+0xde/0x190 [ 320.417644] ? do_syscall_64+0x38/0x6b0 [ 320.417665] do_syscall_64+0xc8/0x6b0 [ 320.417683] ? clear_bhb_loop+0x30/0x80 [ 320.417706] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 320.417727] RIP: 0033:0x7f963bb30beb | ||||
| CVE-2026-68277 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix OOB reads on 2-byte fields in sideband reply parsers Three sideband reply parsers read 16-bit fields as: val = (raw->msg[idx] << 8) | (raw->msg[idx+1]); and check bounds only after the fact. When idx == raw->curlen, raw->msg[idx+1] reads one byte past the received message data into the following struct fields (curchunk_len, curchunk_idx, curlen). Affected functions: - drm_dp_sideband_parse_enum_path_resources_ack() full_payload_bw_number and avail_payload_bw_number fields - drm_dp_sideband_parse_allocate_payload_ack() allocated_pbn field - drm_dp_sideband_parse_query_payload_ack() allocated_pbn field Fix by using a single combined check (idx + 2 > curlen) before each 2-byte read. Since the check is strictly tighter than idx > curlen, no separate step is needed. [added fixes tag] | ||||
| CVE-2026-68278 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/dp/mst: fix buffer overflows in sideband chunk accumulation drm_dp_sideband_append_payload() has three related bugs when processing device-provided sideband reply data: 1. Zero-length curchunk_len underflow: msg_len is a 6-bit field taken directly from the DP sideband header. If a device sends msg_len=0, curchunk_len is set to zero. The condition (curchunk_idx >= curchunk_len) is immediately true, and curchunk_len-1 wraps to 255 (u8 underflow). drm_dp_msg_data_crc4() reads 255 bytes from chunk[48], then memcpy() writes 255 bytes into msg[], both far out of bounds. 2. chunk[48] overflow: curchunk_len can reach 63 (6-bit field). chunk[] is only 48 bytes. Multi-iteration payload assembly appends 16-byte blocks until curchunk_idx reaches curchunk_len, writing up to 15 bytes past the end of chunk[] into msg[]. 3. msg[256] overflow: each chunk contributes (curchunk_len-1) bytes to msg[]. No check ensures curlen + (curchunk_len-1) stays within msg[256], so the memcpy can spill into adjacent struct fields. All three are reachable from any DP MST device that can forge sideband reply messages on a physical connection. | ||||
| CVE-2026-68280 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: cdns-dsi: Replace deprecated UNIVERSAL_DEV_PM_OPS() The deprecated UNIVERSAL_DEV_PM_OPS() macro uses the provided callbacks for both runtime PM and system sleep. This causes the DSI clocks to be disabled twice: once during runtime suspend and again during system suspend, resulting in a WARN message from the clock framework when attempting to disable already-disabled clocks. [ 84.384540] clk:231:5 already disabled [ 84.388314] WARNING: CPU: 2 PID: 531 at /drivers/clk/clk.c:1181 clk_core_disable+0xa4/0xac ... [ 84.579183] Call trace: [ 84.581624] clk_core_disable+0xa4/0xac [ 84.585457] clk_disable+0x30/0x4c [ 84.588857] cdns_dsi_suspend+0x20/0x58 [cdns_dsi] [ 84.593651] pm_generic_suspend+0x2c/0x44 [ 84.597661] ti_sci_pd_suspend+0xbc/0x15c [ 84.601670] dpm_run_callback+0x8c/0x14c [ 84.605588] __device_suspend+0x1a0/0x56c [ 84.609594] dpm_suspend+0x17c/0x21c [ 84.613165] dpm_suspend_start+0xa0/0xa8 [ 84.617083] suspend_devices_and_enter+0x12c/0x634 [ 84.621872] pm_suspend+0x1fc/0x368 To address this issue, replace UNIVERSAL_DEV_PM_OPS() with RUNTIME_PM_OPS(). Bridge and panel drivers should only deal with runtime PM, as the DRM framework manages system-wide power transitions through the bridge enable() and disable() hooks. | ||||
| CVE-2026-68281 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Count paired job fence as dependency in prepare_job() The DRM scheduler's prepare_job() callback counts the remaining non-signaled native dependencies for a job, preventing job submission until those (plus job data and fence update) can fit in the job queue's CCCB. This means checking which dependencies can be waited upon in the firmware, i.e. whether they are backed by a UFO object, i.e. whether their drm_sched_fence::parent has been assigned to a pvr_queue_fence::base fence. That happens when the job owning the fence is submitted to the firmware. Paired geometry and fragment jobs are submitted at the same time, which means the dependency between them can't be checked this way before submission. Update job_count_remaining_native_deps() to take into account the dependency between paired jobs. This fixes cases where prepare_job() underestimated the space left in an almost full fragment CCCB, wrongly unblocking run_job(), which then returned early without writing the full sequence of commands to the CCCB. The above lead to kernel warnings such as the following and potentially job timeouts (depending on waiters on the missing commands): [ 375.702979] WARNING: drivers/gpu/drm/imagination/pvr_cccb.c:178 at pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr], CPU#1: kworker/u16:3/47 [ 375.703160] Modules linked in: [ 375.703571] CPU: 1 UID: 0 PID: 47 Comm: kworker/u16:3 Tainted: G W 7.0.0-rc2-g817eb6b11ad5 #40 PREEMPT [ 375.703613] Tainted: [W]=WARN [ 375.703627] Hardware name: Texas Instruments AM625 SK (DT) [ 375.703645] Workqueue: powervr-sched drm_sched_run_job_work [gpu_sched] [ 375.703741] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 375.703764] pc : pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] [ 375.703847] lr : pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.703921] sp : ffff800084a97650 [ 375.703934] x29: ffff800084a97740 x28: 0000000000000958 x27: ffff80008565d000 [ 375.703979] x26: 0000000000000030 x25: ffff800084a97680 x24: 0000000000001000 [ 375.704017] x23: ffff800084a97820 x22: 1ffff00010952ecc x21: 0000000000000008 [ 375.704056] x20: 00000000000006a8 x19: ffff00002ff7da88 x18: 0000000000000000 [ 375.704093] x17: 0000000020020000 x16: 0000000000020000 x15: 0000000000000000 [ 375.704132] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 375.704168] x11: 000000000000f2f2 x10: 00000000f3000000 x9 : 00000000f3f3f3f3 [ 375.704206] x8 : 00000000f2f2f200 x7 : ffff700010952ecc x6 : 0000000000000008 [ 375.704243] x5 : 0000000000000000 x4 : 1ffff00010acba00 x3 : 0000000000000000 [ 375.704279] x2 : 0000000000000007 x1 : 0000000000000fff x0 : 000000000000002f [ 375.704317] Call trace: [ 375.704331] pvr_cccb_write_command_with_header+0x2c4/0x330 [powervr] (P) [ 375.704411] pvr_queue_submit_job_to_cccb+0x578/0xa70 [powervr] [ 375.704487] pvr_queue_run_job+0x3a4/0x990 [powervr] [ 375.704562] drm_sched_run_job_work+0x580/0xd48 [gpu_sched] [ 375.704623] process_one_work+0x520/0x1288 [ 375.704658] worker_thread+0x3f0/0xb3c [ 375.704680] kthread+0x334/0x3d8 [ 375.704706] ret_from_fork+0x10/0x20 [ 375.704736] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-68256 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amd/display: detect_link_and_local_sink: DP alt mode timeout path leaks prev_sink reference prev_sink is unconditionally retained via dc_sink_retain at function entry, but the DP alt mode timeout path inside SIGNAL_TYPE_DISPLAY_PORT returns false without releasing prev_sink. All other return paths in the function correctly call dc_sink_release(prev_sink), making this the only missing cleanup. (cherry picked from commit 45510cf662dcf46b5d8926d454f338809f107b9d) | ||||
| CVE-2026-68270 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/sysfb: Avoid possible truncation with calculating visible size Calculating the visible size of the system framebuffer can result in truncation of the result. The calculation uses 32-bit arithmetics, which can overflow if the values for height and stride are large. Fix the issue by multiplying with mul_u32_u32(). | ||||
| CVE-2026-68272 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1 Add a minimum-length check for the AMDGPU_CHUNK_ID_CP_GFX_SHADOW chunk in amdgpu_cs_pass1(), matching the gate already present for the IB, FENCE and BO_HANDLES chunk types. The CP_GFX_SHADOW case previously shared a bare break with the dependency and syncobj chunk types, which do not dereference a fixed-size struct. When userspace submits this chunk with length_dw == 0, vmemdup_array_user() is called with size 0 and returns ZERO_SIZE_PTR, which passes the IS_ERR() check. amdgpu_cs_p2_shadow() then dereferences chunk->kdata as a struct drm_amdgpu_cs_chunk_cp_gfx_shadow (reading shadow->flags), faulting on the ZERO_SIZE_PTR and causing a NULL-pointer dereference. This is reachable by an unprivileged process in the render group. Reject undersized chunks with -EINVAL during pass1 so the bad submission is rejected before pass2 ever dereferences the data. (cherry picked from commit 7f61b2eef7415eccdb40850aca0de94211948657) | ||||
| CVE-2026-68139 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/mlx5e: Use sender devcom for MPV master-up After PCIe DPC recovery, mlx5 reloads the affected functions and replays multiport affiliation events. In the reported failure, the first relevant device error was: pcieport 0000:10:01.1: DPC: containment event pcieport 0000:10:01.1: PCIe Bus Error: severity=Uncorrected (Fatal) pcieport 0000:10:01.1: [ 5] SDES (First) mlx5 recovered the PCI functions and resumed 0000:11:00.1. During that resume, RDMA multiport binding replayed MLX5_DRIVER_EVENT_AFFILIATION_DONE and mlx5e sent MPV_DEVCOM_MASTER_UP. The host then panicked with: BUG: kernel NULL pointer dereference, address: 0000000000000010 RIP: mlx5_devcom_comp_set_ready+0x5/0x40 [mlx5_core] RDI: 0000000000000000 Call trace included: mlx5_devcom_comp_set_ready mlx5e_devcom_event_mpv mlx5_devcom_send_event mlx5_ib_bind_slave_port mlx5r_mp_probe mlx5_pci_resume MPV devcom registration publishes mlx5e private data to the component peer list before mlx5e_devcom_init_mpv() stores the returned component device in priv->devcom. A concurrent master-up event can therefore reach a peer whose private data is visible but whose priv->devcom backpointer is still NULL. MPV_DEVCOM_MASTER_UP already carries the sender/master mlx5e private data as event_data. The ready bit is stored on the shared devcom component, not on an individual peer. Use the sender devcom when marking the MPV component ready. This preserves the readiness transition while avoiding a NULL dereference of the peer devcom pointer during affiliation replay after PCI error recovery. | ||||
| CVE-2026-68247 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/bios: range check LFP Data Block panel_type2 While the panel_type from LFP Data Block is range checked, panel_type2 is not. Add a few helpers for range checking, and use them to not only check panel_type2, but also improve clarity and correctness in the panel type selection. Discovered using AI-assisted static analysis confirmed by Intel Product Security. v2: - Fix commit message typo (Michał) - Add is_panel_type_pnp() (Ville) (cherry picked from commit c9ebe5d2f25729d6cfbbb1235d640bf67f9275df) | ||||
| CVE-2026-68105 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: Fix kernel panic during driver load failure Avoid kernel panic if MES init fails during driver load. The KIQ ring is falsely marked as ready as ASICs that use MES, KIQ is owned by MES. BUG: kernel NULL pointer dereference, address: 0000000000000000 RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu] Call Trace: gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu] amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu] amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu] amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu] amdgpu_gart_unbind+0x72/0x90 [amdgpu] amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu] amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu] amdttm_tt_unpopulate+0x29/0x70 [amdttm] ttm_bo_put+0x1eb/0x360 [amdttm] amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu] amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu] amdgpu_irq_fini_hw+0x58/0x80 [amdgpu] amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu] amdgpu_driver_load_kms+0x60/0xa0 [amdgpu] amdgpu_pci_probe+0x28e/0x6d0 [amdgpu] pci_device_probe+0x19f/0x220 really_probe+0x1ed/0x340 driver_probe_device+0x1e/0x80 __driver_attach+0xd3/0x1a0 bus_for_each_dev+0x68/0xa0 bus_add_driver+0x19f/0x270 driver_register+0x5d/0xf0 do_one_initcall+0xac/0x200 do_init_module+0x1ec/0x280 __se_sys_finit_module+0x2de/0x310 do_syscall_64+0x6a/0x250 entry_SYSCALL_64_after_hwframe+0x4b/0x53 (cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) | ||||
| CVE-2026-68115 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) | ||||