Export limit exceeded: 21301 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21301 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68375 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68378 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync() When a dpll_pin is shared across multiple dpll_device instances and those devices are being unregistered (e.g. during driver module removal), a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync(). This happens under the following conditions: - A pin is registered with two or more dpll devices (dpll_A, dpll_B) - The pin has ref_sync pairs with other pins - During unregistration of dpll_A's pins, a ref_sync partner pin is unregistered first, removing it from dpll_A->pin_refs - But since the partner pin is still registered with dpll_B, its dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT run and the partner stays in the pin's ref_sync_pins xarray - When the pin itself is then unregistered from dpll_A, the delete notification calls dpll_msg_add_pin_ref_sync() which finds the partner in ref_sync_pins, passes dpll_pin_available() (partner is still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A, partner) returns NULL because partner was already removed from dpll_A->pin_refs - The NULL priv pointer is passed to the driver's ref_sync_get callback, which dereferences it BUG: kernel NULL pointer dereference, address: 0000000000000034 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x] Call Trace: dpll_msg_add_pin_ref_sync+0xb8/0x200 dpll_cmd_pin_get_one+0x3b6/0x4b0 dpll_pin_event_send+0x72/0x140 __dpll_pin_unregister+0x5a/0x2b0 dpll_pin_unregister+0x49/0x70 Fix this by skipping ref_sync pins whose priv pointer cannot be resolved for the current dpll device. | ||||
| CVE-2026-68310 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available. | ||||
| CVE-2026-68362 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 | ||||
| CVE-2026-68337 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it. | ||||
| CVE-2026-68339 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation. | ||||
| CVE-2026-68345 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: guard MBWU state before adding it to garbage __destroy_component_cfg() adds each RIS mbwu_state object to the MPAM garbage list when destroying component configuration. However, mbwu_state is allocated per RIS and only for RISes with MBWU monitors. A component can therefore have comp->cfg allocated while some RISes still have ris->mbwu_state set to NULL. Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL pointer inside the macro. Skip RISes that do not have an mbwu_state object before adding them to the garbage list. | ||||
| CVE-2026-68336 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller. | ||||
| CVE-2026-68327 | 1 Linux | 1 Linux Kernel | 2026-08-10 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wan: wanxl: Only reset hardware after BAR mapping wanxl_pci_init_one() stores the freshly allocated card in driver data before the PLX BAR is mapped. Several early probe failures then unwind through wanxl_pci_remove_one(), including failure to allocate the coherent status area or to restore the DMA mask. wanxl_pci_remove_one() unconditionally calls wanxl_reset(), and wanxl_reset() dereferences card->plx. On those early failures card->plx is still NULL, so the error path can dereference a NULL MMIO pointer. Only issue the hardware reset once the BAR mapping exists. The remaining cleanup in wanxl_pci_remove_one() already checks whether later resources were allocated. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68328 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: nfp: Check resource mutex allocation nfp_cpp_resource_find() allocates a CPP mutex handle for the matching resource-table entry and then reports success. nfp_resource_try_acquire() immediately passes that handle to nfp_cpp_mutex_trylock(). However, nfp_cpp_mutex_alloc() returns NULL on failure. If that happens for a matching table entry, the resource lookup still returns success and the following trylock dereferences a NULL mutex pointer while opening the resource. nfp_resource_acquire() already treats failure to allocate the table mutex as -ENOMEM. Do the same for the resource mutex and fail the lookup before publishing the rest of the resource handle. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68308 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: check pointer returned by mt76_connac_get_he_phy_cap() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68311 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: guard link STA in decap offload mt7925_sta_set_decap_offload() iterates over the vif valid_links mask when updating decap offload state for an MLO station. The station may not have a link STA for every valid link of the vif, so mt792x_sta_to_link() can return NULL for a link that belongs to the vif but not to the station. The function currently dereferences mlink before checking whether the link WCID is ready. If mlink is NULL, setting or clearing MT_WCID_FLAG_HDR_TRANS dereferences a NULL pointer. Skip links without a station link before touching mlink->wcid. | ||||
| CVE-2026-68322 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: rds: Fix inet6_addr_lst NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, inet6_addr_lst is never initialized because inet6_init() exits before addrconf_init() is called to initialize it. An attempt to bind an RDS socket to an ipv6 address results in a crash in __ipv6_chk_addr_and_flags() KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f] RIP: 0010:__ipv6_chk_addr_and_flags+0x1df/0x7e0 Call Trace: <TASK> ipv6_chk_addr+0x3b/0x50 rds_tcp_laddr_check+0x155/0x3b0 [rds_tcp] rds_trans_get_preferred+0x15d/0x2d0 [rds] ? trace_hardirqs_on+0x2d/0x110 rds_bind+0x1433/0x1d60 [rds] ? rds_remove_bound+0xd50/0xd50 [rds] ? aa_af_perm+0x250/0x250 ? __might_fault+0xde/0x190 ? __sys_bind+0x1dc/0x210 __sys_bind+0x1dc/0x210 ? __ia32_sys_socketpair+0x100/0x100 ? restore_fpregs_from_fpstate+0x53/0x100 __x64_sys_bind+0x73/0xb0 ? syscall_enter_from_user_mode+0x1c/0x50 do_syscall_64+0x34/0x80 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 RIP: 0033:0x7f47f8269ea9 </TASK> The following code reproduces the issue: struct sockaddr_in6 addr; s = socket(PF_RDS, SOCK_SEQPACKET, 0); memset(&addr, 0, sizeof(addr)); inet_pton(AF_INET6, ADDRESS, &addr.sin6_addr); addr.sin6_family = AF_INET6; addr.sin6_port = htons(PORT); bind(s, &addr, sizeof(addr)); Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-68261 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: fix error checking of pvr_vm_context_lookup() Since pvr_vm_context_lookup() returns either NULL or a pointer, then stop using IS_ERR() for checking the return value. Using IS_ERR() leads to the kernel oops reported below. It can be reproduced by passing an invalid VM context handle from userspace to the DRM_IOCTL_PVR_CREATE_CONTEXT ioctl. [ 92.733119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000148 [ 92.742042] Mem abort info: [ 92.744890] ESR = 0x0000000096000004 [ 92.748686] EC = 0x25: DABT (current EL), IL = 32 bits [ 92.754020] SET = 0, FnV = 0 [ 92.757154] EA = 0, S1PTW = 0 [ 92.760337] FSC = 0x04: level 0 translation fault [ 92.765243] Data abort info: [ 92.768129] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 92.773626] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 92.778763] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 92.784098] user pgtable: 4k pages, 48-bit VAs, pgdp=000000088ed23000 [ 92.790550] [0000000000000148] pgd=0000000000000000, p4d=0000000000000000 [ 92.797381] Internal error: Oops: 0000000096000004 [#1] SMP [ 92.803027] Modules linked in: powervr [ 92.852533] CPU: 0 UID: 0 PID: 409 Comm: triangle Not tainted 7.1.0-rc5-g98b46e693b91 #1 PREEMPT [ 92.861385] Hardware name: Texas Instruments AM68 SK (DT) [ 92.866766] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 92.873709] pc : pvr_vm_get_fw_mem_context+0x0/0xc [powervr] [ 92.879376] lr : pvr_queue_create+0x26c/0x440 [powervr] [ 92.884595] sp : ffff8000837fbb00 [ 92.887895] x29: ffff8000837fbb60 x28: 0000000000000000 x27: ffff8000837fbce8 [ 92.895015] x26: ffff000807f61a40 x25: ffff000807f61a00 x24: ffff000807f64400 [ 92.902135] x23: ffff00080a5ab000 x22: ffff800079b24730 x21: ffff000807f61800 [ 92.909254] x20: ffff00080999e680 x19: 0000000000000000 x18: 0000000000000000 [ 92.916373] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001 [ 92.923492] x14: 0000000000000000 x13: 0000000000000002 x12: ffff80008145b298 [ 92.930611] x11: ffff8000844e5000 x10: ffff80008165a130 x9 : 0000000000000100 [ 92.937730] x8 : 0000000000000001 x7 : ffff0008076b27e0 x6 : ffff00080ec43b7c [ 92.944850] x5 : ffff00080ec43b78 x4 : 0000000000000000 x3 : ffff00080999e680 [ 92.951968] x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000000 [ 92.959088] Call trace: [ 92.961521] pvr_vm_get_fw_mem_context+0x0/0xc [powervr] (P) [ 92.967173] pvr_context_create+0x190/0x410 [powervr] [ 92.972218] pvr_ioctl_create_context+0x44/0x8c [powervr] [ 92.977608] drm_ioctl_kernel+0xbc/0x124 [drm] [ 92.982127] drm_ioctl+0x1f8/0x4dc [drm] [ 92.986098] __arm64_sys_ioctl+0xac/0x104 [ 92.990102] invoke_syscall+0x54/0x10c [ 92.993842] el0_svc_common.constprop.0+0x40/0xe0 [ 92.998532] do_el0_svc+0x1c/0x28 [ 93.001835] el0_svc+0x38/0x11c [ 93.004969] el0t_64_sync_handler+0xa0/0xe4 [ 93.009139] el0t_64_sync+0x198/0x19c [ 93.012792] Code: aa1703e0 d2800014 95cb0ba4 17ffffe8 (f940a400) [ 93.018869] ---[ end trace 0000000000000000 ]--- | ||||
| CVE-2026-68275 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO The AMDGPU_GEM_OP_GET_MAPPING_INFO path of amdgpu_gem_op_ioctl() looks up the bo_va for the buffer object in the caller's VM via amdgpu_vm_bo_find(), but uses the returned pointer without checking it. amdgpu_vm_bo_find() returns NULL when the BO has no bo_va in that VM, which is the normal case for a BO that has never been mapped. The result is fed straight into amdgpu_vm_bo_va_for_each_valid_mapping(), which expands to list_for_each_entry(mapping, &(bo_va)->valids, list) and dereferences bo_va, causing a NULL pointer dereference. This is reachable by any process able to issue the ioctl (render group) simply by requesting mapping info for an unmapped BO. Return -ENOENT when no bo_va is found, jumping to out_exec so the drm_exec context and GEM object reference are released. (cherry picked from commit 528b19377affc1cc7362a70a254c1dda793595f9) | ||||
| CVE-2026-68289 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix integer overflow in tipc_recvmsg() and tipc_recvstream() In tipc_recvmsg(), the copy length is computed as: copy = min_t(int, dlen - offset, buflen); buflen is size_t but min_t(int, ...) casts it to int. When buflen exceeds INT_MAX (e.g. 0xFFFFFFFF via io_uring provided buffers), it wraps negative, wins the comparison, and the negative copy length propagates to simple_copy_to_iter() where int-to-size_t promotion makes it SIZE_MAX, triggering a WARN_ON. tipc_recvstream() has the same pattern. Kernel panic - not syncing: kernel: panic_on_warn set ... RIP: 0010:simple_copy_to_iter+0x9e/0xd0 (net/core/datagram.c:521) Call Trace: __skb_datagram_iter+0x123/0x8b0 (net/core/datagram.c:402) skb_copy_datagram_iter+0x77/0x1a0 (net/core/datagram.c:534) tipc_recvmsg+0x3d7/0xe80 (net/tipc/socket.c:1934) io_recvmsg+0x47e/0xda0 Fix by changing min_t(int, ...) to min_t(size_t, ...) in both functions. The result is always <= (dlen - offset), which is bounded by TIPC maximum message size (0x1ffff bytes), so the implicit narrowing on assignment to int copy is always safe. | ||||
| CVE-2026-68319 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: pds_core: fix deadlock between reset thread and remove pci_reset_function() acquires device_lock before performing the reset. pdsc_remove() is called by the PCI core with device_lock already held. If pdsc_pci_reset_thread() is running when pdsc_remove() is called, destroy_workqueue() will block waiting for the work to complete, while the work is blocked waiting for device_lock - deadlock. Use pci_try_reset_function() which uses pci_dev_trylock() internally. This acquires both the device lock and the PCI config access lock without blocking - if either lock is contended, it returns -EAGAIN immediately. This avoids the deadlock while also ensuring proper config space access serialization during the reset. The pci_dev_get/put calls are also removed as they were unnecessary - the driver-owned workqueue is destroyed in pdsc_remove(), guaranteeing the work completes before remove returns. The PCI core holds its reference to pci_dev throughout the entire unbind sequence. | ||||
| CVE-2026-68306 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7996: fix possible NULL-pointer deref in mt7996_mcu_sta_bfer_eht() mt76_connac_get_eht_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68309 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: connac: fix possible NULL-pointer deref in mt76_connac_mcu_uni_bss_he_tlv() mt76_connac_get_he_phy_cap routine can theoretically return NULL so check cap pointer before dereferencing it. | ||||
| CVE-2026-68313 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix infinite loop in __tipc_nl_compat_dumpit cmd->dumpit callback can return a negative errno, causing an infinite loop due to the while(len) condition. As the loop never terminates, genl_mutex is never released, and other tasks waiting on it starve in D state. Check dumpit's return value, propagate it and jump to err_out on error. | ||||