Export limit exceeded: 28590 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (28590 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-90251 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: MSFT: validate evt_prefix_len against the response length read_supported_features() only checks that the response covers the fixed part of struct msft_rp_read_supported_features, which is 11 bytes: if (skb->len < sizeof(*rp)) { bt_dev_err(hdev, "MSFT supported features length mismatch"); goto failed; } evt_prefix[] is a flexible array member and rp->evt_prefix_len is an unvalidated u8 taken straight out of that response, so msft->evt_prefix = kmemdup(rp->evt_prefix, rp->evt_prefix_len, GFP_KERNEL); copies up to 255 bytes from a reply that may have carried none of them. What is copied is data the controller never sent, and it is then used to match incoming vendor events in msft_vendor_evt(). This is not an out-of-bounds access. An skb data allocation always has at least SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) bytes past the payload, which is more than the 255 byte maximum, so the read stays inside the allocation and KASAN does not report it. It is still a read of bytes the host was never given, with the length fully controlled by the controller. Reject a response that is too short for the prefix it declares. Verified with an emulated controller over /dev/vhci on a KASAN kernel, with vhci made to advertise an MSFT opcode the way btintel, btqca, btmtk and btrtl do unconditionally. A reply of exactly 11 bytes declaring evt_prefix_len = 255 reaches kmemdup and copies 255 bytes ("skb->len=11 evt_prefix_len=255", with the copied buffer dumped); since the reply ends at the fixed part, all 255 come from past the end of the response. No KASAN report is produced, as expected from the allocation slack described above. With this patch the response is rejected with "MSFT event prefix length mismatch" and msft->evt_prefix is left unset. | ||||
| CVE-2026-90258 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: pinctrl: airoha: add missed IRQ resource helpers Without hooking .irq_request_resources, gpiolib cannot set GPIOD_FLAG_USED_AS_IRQ. This breaks pin direction locking and can allow userspace or another driver to reconfigure an active IRQ pin as an output | ||||
| CVE-2026-92933 | 1 Patriksimek | 1 Vm2 | 2026-09-19 | 5.8 Medium |
| vm2 is a sandbox for running untrusted Node.js code. In versions <= 3.11.7, NodeVM exposes the host `util` module to the sandbox as an unfiltered shallow copy (`Object.assign({}, util)` in `defaultBuiltinLoaderUtil`), and the deprecated `sys` builtin (an alias of host `util`) is exposed through the generic builtin loader. On Node.js >= 22.9 this hands sandboxed code `util.getCallSites()`, a programmatic stack-introspection API that returns the host process's full call stack, including absolute file paths, function names, and line numbers for vm2 bridge internals and the embedding application's entrypoint. This bypasses the host-frame redaction introduced for GHSA-v27g-jcqj-v8rw, which only applies to the `Error.prepareStackTrace` formatting channel. The issue is fixed in vm2 3.11.8. | ||||
| CVE-2026-92917 | 1 Getgrav | 1 Grav | 2026-09-19 | 7.5 High |
| Grav is a flat-file CMS. In versions 2.0.0-rc.1 through 2.0.21, the Twig content sandbox fails to restrict the dump and serialize filters (print_r, vardump, json_encode, yaml_encode, string): GravExtension::assertSandboxDumpSafe() determines sandbox state by calling SandboxExtension::isSandboxed() without a Source argument, which reports only the global sandbox flag that Grav never enables, so the guard added in GHSA-mc5q-6hpj-rp7j never executes. As a result, an authenticated user with page-edit rights can render {{ config|print_r }} in page content with Twig processing enabled and dump Grav's entire merged configuration — print_r reflects the real Config object held in a private property of the SandboxConfig facade, bypassing its path redaction — exposing plugin secrets such as SMTP credentials, API tokens, webhook secrets and cache backend passwords. Grav 1.7 is not affected because it ships no Twig content sandbox. The issue is fixed in 2.0.22, where the affected filters are registered with Twig's needs_is_sandboxed flag. | ||||
| CVE-2026-92860 | 1 Rcourtman | 1 Pulse | 2026-09-19 | 9.1 Critical |
| A security flaw has been discovered in rcourtman Pulse up to 6.0.4/6.1.0-rc.4. Affected by this issue is the function fmt.Sprintf of the file /api/security/quick-setup of the component Quick Security Setup Handler. The manipulation of the argument Username results in improper input validation. The attack may be performed from remote. Upgrading the affected component is advised. | ||||
| CVE-2026-90212 | 1 Linux | 1 Linux Kernel | 2026-09-19 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: arm64/efi: Avoid voluntary preemption with efi_mm installed Gus reports a bad kernel memory access when using software PAN (CONFIG_ARM64_SW_TTBR0_PAN=y) on a machine with support for EFI runtime services: Unable to handle kernel access to user memory outside uaccess routines at virtual address 00000000f322ff30 Mem abort info: ESR = 0x0000000096000004 FSC = 0x04: level 0 translation fault Internal error: Oops: 0000000096000004 [#1] SMP Workqueue: efi_rts_wq efi_call_rts pstate: 80400005 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : efi_call_rts+0xd8/0x288 Call trace: efi_call_rts+0xd8/0x288 (P) process_one_work+0x178/0x4f8 worker_thread+0x194/0x328 This is because the fpsimd context management code called from __efi_fpsimd_begin() can preempt voluntarily, returning later to the EFI code with an incorrect value for TTBR0_EL1 thanks to the deferred mm switching used by the software PAN implementation. Since EFI runtime services cannot preempt voluntarily and because the fpsimd switching code does not rely on the TTBR0_EL1 mappings, simply reorder the fpsimd switch so that it occurs before we change the page-table. | ||||
| CVE-2026-64684 | 1 Modelcontextprotocol | 1 Rust-sdk | 2026-09-19 | 6.8 Medium |
| RMCP is an official Rust SDK for the Model Context Protocol. Prior to 2.1.0, the rmcp crate's StreamableHttpClientTransport in crates/rmcp/src/transport/common/reqwest/streamable_http_client.rs builds its default_http_client with reqwest's automatic redirect policy and applies caller-supplied values from StreamableHttpClientTransportConfig.custom_headers without marking them as sensitive. When a malicious or compromised MCP endpoint returns a cross-origin 307 or 308 redirect, reqwest follows the redirect and apply_custom_headers causes custom API keys or authentication tokens to be replayed to the new origin, where an attacker can capture and reuse them. The separate auth_header path is not affected because it uses the standard Authorization header, which reqwest strips on cross-origin redirects. This issue is fixed in version 2.1.0. | ||||
| CVE-2026-61588 | 1 Djust-org | 1 Djust | 2026-09-19 | 6.5 Medium |
| djust provides Phoenix LiveView-style reactive server-side rendering for Django with Rust-powered performance. Prior to version 1.0.7, when a Django `Model` instance is assigned to a public view attribute, djust serialized it to the client with no sensitive-field denylist — sending fields such as `password` (the hash), privilege flags (e.g. `is_staff` / `is_superuser`), tokens, and other PII to the browser. Because exposing model objects to templates is a normal djust pattern, this could leak credentials/PII without the developer realizing the full object crossed the wire. This is fixed in djust 1.0.7. Model serialization applies a secure-by-default sensitive-field denylist (password/hash/token/secret-style fields and known privilege flags are withheld) with an identity-subset fallback. As a workaround, keep `Model` instances on `_private` attributes and expose only the specific fields needed, until patched. | ||||
| CVE-2026-45723 | 1 Siderolabs | 1 Omni | 2026-09-18 | 2.7 Low |
| Omni manages Kubernetes on bare metal, virtual machines, or in a cloud. Prior to 1.6.6 and 1.7.3, managementServer.CreateSchematic in internal/backend/grpc/schematics.go passes the caller-controlled TalosVersion field to imageFactoryClient.OverlaysVersions without validating it as a version. An authenticated Operator can submit traversal segments in TalosVersion, and url.URL.JoinPath normalizes them into unintended paths on the configured image-factory host. Omni then issues HTTP GET requests to those paths and reflects error-body content, enabling same-host endpoint probing and possible disclosure of internal diagnostics while preventing redirection to another host or write requests. This issue is fixed in versions 1.6.6 and 1.7.3. | ||||
| CVE-2026-54617 | 1 Gravitlauncher | 1 Launcher | 2026-09-18 | 9.8 Critical |
| GravitLauncher is an open-source Minecraft launcher based on sashok724's v3. Prior to 5.7.12, an unauthenticated remote actor can send a raw HTTP request target without a leading slash to the default LaunchServer file server on port 9274. FileServerHandler.channelRead0 in components/launchserver/src/main/java/pro/gravit/launchserver/socket/handlers/fileserver/FileServerHandler.java strips the first request-target character and resolves the remaining path against updatesDir without re-normalizing and verifying containment. This leaves parent-directory components in a no-leading-slash request and allows reading any file accessible to the LaunchServer process, including .keys/ecdsa_id, .keys/legacySalt, and LaunchServer.json. Disclosure of those files can expose signing keys, refresh-token material, and database credentials, enabling forged administrative access tokens and full authentication bypass. A normalizing L7 proxy may block the primary request form, but direct exposure and L4/TCP proxies remain affected, and netty.fileServerEnabled is enabled by default. This issue is fixed in 5.7.12. | ||||
| CVE-2026-83191 | 1 Oracle | 1 Siebel Crm Deployment | 2026-09-18 | 8.1 High |
| Vulnerability in the Siebel CRM Deployment product of Oracle Siebel CRM (component: Server Infrastructure). Supported versions that are affected are 17.0-26.7. Difficult to exploit vulnerability allows unauthenticated attacker with network access via TCP to compromise Siebel CRM Deployment. Successful attacks of this vulnerability can result in takeover of Siebel CRM Deployment. CVSS 3.1 Base Score 8.1 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:H/PR:N/UI:N/S:U/C:H/I:H/A:H). | ||||
| CVE-2026-92916 | 1 Getgrav | 1 Grav | 2026-09-18 | 7.5 High |
| Grav is a flat-file CMS. In Grav 1.7.0 through 1.7.53.2 and 2.0.0 through 2.0.21, when the debugger is enabled (system.debugger.enabled: true, which is not the default), the Clockwork profiler endpoint is exposed without authentication: InitializeProcessor::handleDebuggerRequest() intercepts any path containing /__clockwork/ during bootstrap and passes it to Debugger::debuggerRequest(), which performs no user lookup, IP restriction, or Clockwork authenticator check, and also supports anonymous pagination over the entire stored history. With the shipped censored: false default, each stored record contains raw request cookies (including Grav's session cookie, whose value is the PHP session id, allowing an attacker to resume another user's session, including an authenticated admin's), the full parsed request body (Grav's login form posts data[username]/data[password], so passwords are stored in plaintext because Clockwork's password filter only inspects top-level keys), and the site's entire system and plugin configuration, including operator-saved secrets such as SMTP credentials, third-party API keys, and licence keys. Authorization and X-API-Token headers are stored even when censored: true. On Grav 2.0, setting provider: debugbar does not avoid the issue because Grav forces the Clockwork provider for requests preferring a JSON response. The issue is fixed in 1.7.53.4 and 2.0.22, which restrict /__clockwork/ to server-local requests or requests presenting the new system.debugger.token secret and strip cookies and credential headers from stored records. Workarounds include setting debugger.enabled: false or blocking /__clockwork/ at the web server or CDN. | ||||
| CVE-2026-92594 | 1 Craftcms | 1 Craft Cms | 2026-09-18 | 7.5 High |
| Craft CMS 5.0.0-RC1 through versions before 5.11.0 incorrectly authorize the GraphQL draftCreator and revisionCreator fields: instead of requiring the user-data scope enforced by Gql::canQueryUsers() (usergroups.*:read), these fields are gated only on the elements.drafts:read / elements.revisions:read scopes, and their resolver returns a raw User element whose email, username, fullName, and addresses fields have no per-field authorization. A client holding only the drafts or revisions scope — including an unauthenticated client when the operator has enabled the public GraphQL schema with those scopes — can therefore harvest the email addresses, usernames, full names, and postal addresses of all draft/revision creators (typically site editors and administrators). The issue is fixed in 5.11.0. | ||||
| CVE-2026-90999 | 1 Functional Software | 1 Sentry Seer | 2026-09-18 | 9.8 Critical |
| Sentry Seer is vulnerable to a multi-stage trust-boundary violation that allows unauthenticated attacker-controlled telemetry to become code that is executed by an agent in a privileged automation environment. An external attacker can submit fabricated Sentry events without having access to the victim’s Sentry account, source repository, or infrastructure. | ||||
| CVE-2026-54501 | 1 Webrecorder | 1 Browsertrix | 2026-09-18 | N/A |
| Browsertrix is a high-fidelity, browser-based crawling service for web archiving that can be self-hosted or used through Webrecorder's hosted instance. From 1.15.0 until 1.22.8, Browsertrix improperly sanitizes Git URLs specified as Custom Behaviors, allowing command injection through /api/orgs/*/crawlconfigs/validate/custom-behavior. A user with crawler or administrator permission on the specific instance can supply a crafted Git URL that executes arbitrary operating-system commands in the backend pod. Open registration or hosted free-trial access can make the required role broadly obtainable. Successful exploitation can expose, modify, or delete application database records, archived items, browser profiles, storage data, proxy credentials, and other configured service data. This issue is fixed in version 1.22.8. | ||||
| CVE-2026-92357 | 1 A2ui-project | 1 A2ui | 2026-09-18 | 4.3 Medium |
| A vulnerability was identified in a2ui-project a2ui 0.8/0.9/1.0. Impacted is an unknown function of the file model-processor.ts of the component Model Processor. The manipulation of the argument current[segment] leads to information disclosure. The attack may be initiated remotely. The identifier of the patch is 1b3bff234661ce922cbc3771be642b23ec9fd0fa. To fix this issue, it is recommended to deploy a patch. | ||||
| CVE-2026-87211 | 1 Oracle | 1 Hyperion Financial Management | 2026-09-18 | 7.5 High |
| Vulnerability in the Oracle Hyperion Financial Management product of Oracle Hyperion (component: Security). The supported version that is affected is 11.2.26.0.000. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Hyperion Financial Management. Successful attacks of this vulnerability can result in unauthorized access to critical data or complete access to all Oracle Hyperion Financial Management accessible data. CVSS 3.1 Base Score 7.5 (Confidentiality impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:N/A:N). | ||||
| CVE-2024-58380 | 1 Pmmp | 1 Pocketmine-mp | 2026-09-18 | 6.5 Medium |
| PocketMine-MP versions before 5.11.2 contain a denial of service vulnerability in BookEditPacket handling that crashes the server when an invalid inventory slot value is provided. Attackers can send a crafted BookEditPacket with an inventory slot greater than 35 to trigger an unhandled exception and crash the server. | ||||
| CVE-2023-54392 | 1 Pmmp | 1 Pocketmine-mp | 2026-09-18 | 6.5 Medium |
| PocketMine-MP versions >= 4.20.0 before 4.22.3 (and before 5.2.1 in the 5.x branch) fail to validate NBT tag types in BlockActorDataPacket. A player can crash the server by sending a packet containing sign NBT data with an incorrect tag type, triggering an unhandled UnexpectedTagTypeException that terminates the server process. | ||||
| CVE-2026-69197 | 1 Umbraco | 1 Umbraco Cms | 2026-09-18 | N/A |
| Umbraco is an ASP.NET CMS. Prior to 13.15.1, 17.5.3, and 18.0.2, the Content Delivery API applies member and Public Access checks to the directly requested node but not to referenced nodes serialized through Content Picker or Multi-Node Tree Picker properties, including pickers nested in Block List, Block Grid, or Rich Text Editor blocks. When DeliveryApi:PublicAccess is enabled, an anonymous caller can retrieve a protected node's name, route, and id through an unprotected referencing node and use ?expand to retrieve full property values. When the Delivery API is instead gated by the organization-wide API key, a key holder can still bypass per-node Public Access through the same expansion path. The same RequestContextOutputExpansionStrategyV2 and ElementOnlyOutputExpansionStrategy path also bypasses allowed or disallowed content-type alias restrictions for referenced content. Direct requests for the protected node still return 401, and no integrity or availability impact is established. This issue is fixed in versions 13.15.1, 17.5.3, and 18.0.2. | ||||