Export limit exceeded: 376673 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (376673 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68179 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: misc: nsm: only unlock nsm_dev on post-lock error paths nsm_dev_ioctl() jumps to the common out label even when the initial copy_from_user() fails before nsm->lock has been taken. The error path then blindly unlocks a mutex that was never acquired. This issue was found by our static analysis tool and then manually reviewed against the current tree. The grounded PoC kept the miscdevice ioctl entry and the pre-lock copy_from_user(&raw, argp, _IOC_SIZE(cmd)) failure path by issuing NSM_IOCTL_RAW with an invalid user pointer. That failure reaches the shared out label before mutex_lock(&nsm->lock). Lockdep reported: WARNING: bad unlock balance detected! exploit/193 is trying to release lock (&global_nsm.lock) at: nsm_dev_ioctl+0x5f/0xcf [vuln_msv] but there are no more locks to release! no locks held by exploit/193. Return immediately on the pre-lock copy_from_user() failure and keep the common unlock label for the post-lock paths only. | ||||
| CVE-2026-68180 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: intel_th: fix MSC output device reference leak intel_th_output_open() looks up the output device with bus_find_device_by_devt(), which returns the device with a reference that must be dropped after use. commit 95fc36a234da ("intel_th: fix device leak on output open()") attempted to drop the reference from intel_th_output_release(). However, a successful open replaces file->f_op with the output driver file operations before returning, so close runs the output driver release callback instead. For MSC outputs, close runs intel_th_msc_release(), which only removes the per-file iterator and does not drop the device reference taken by intel_th_output_open(). Consequently, every successful MSC output open leaks one device reference. Drop the device reference from intel_th_msc_release(), which is the release path actually used for MSC output files. Remove the now-unused intel_th_output_release() callback from intel_th_output_fops. | ||||
| CVE-2026-68181 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: mei: bus: access mei_device under device_lock on cleanup Fix couple of problems in mei_cl_bus_dev_release(): mei_cl_flush_queues() is running without lock. bus->file_list access after mei_dev_bus_put(bus) can become a use-after-free if this was the last reference to bus. Protect queues cleanup and WARN traversal by device lock there to avoid the concurrent access problems. Move WARN traversal before mei_dev_bus_put(bus). This file uses bus variable name for mei_device, adjust code of mei_cl_bus_dev_release() to use bus variable too. | ||||
| CVE-2026-68183 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firmware: stratix10-svc: fix memory leaks and list corruption bugs Fix a memory leak when gen_pool_alloc() fails by freeing pmem on the error path. Switch pmem allocation from devm_kzalloc() to kzalloc() with explicit kfree() in the free path to match its list-managed lifetime. Remove the erroneous list_del(&svc_data_mem) which corrupted the list head on failed lookups. | ||||
| CVE-2026-68190 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB reads in rtw_get_wps_ie() rtw_get_wps_ie() iterates over IE data from network frames without validating that the IE header and payload fit within the remaining buffer before reading them. Specifically: - in_ie[cnt + 1] is read without checking cnt + 1 < in_len - memcmp(&in_ie[cnt + 2], ...) accesses cnt + 2 without bounds check - in_ie[cnt + 1] is used as length without verifying payload fits Add bounds checks at the top of the loop body to break early if fewer than 2 bytes remain for the IE header, or if the declared payload extends past the end of the buffer. Also require at least 4 bytes of payload before comparing the WPS OUI. | ||||
| CVE-2026-18945 | 2026-08-13 | N/A | ||
| The WP Helper Premium WordPress plugin before 4.7.6 does not verify the order key when rendering its custom order confirmation page or when handling the related AJAX actions, allowing unauthenticated users to view other customers' order details, including personal information, as well as change the state of arbitrary orders. Exploitation requires WooCommerce to be active and the WP Helper Premium WordPress plugin before 4.7.6's optional order confirmation page module to be enabled. | ||||
| CVE-2026-19429 | 1 Jenkins Project | 1 Jenkins | 2026-08-13 | 8.8 High |
| Jenkins FilePath.untarFrom() does not validate symlink targets when extracting TAR archives, allowing an attacker with Item/Configure permission to create symlinks from a workspace to arbitrary files on the Jenkins controller. This issue remains exploitable in versions patched for CVE-2026-33001 and CVE-2026-70427. An attacker can use this to read sensitive files from $JENKINS_HOME, including Jenkins cryptographic keys and stored credentials. Jenkins 2.576 is additionally affected by a Unicode zero-width character bypass of the blank-name validation introduced by CVE-2026-70427. | ||||
| CVE-2026-68184 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: cdrom: fix stack out-of-bounds read in CDROMVOLCTRL mmc_ioctl_cdrom_volume() first reads the audio control mode page into a 32-byte stack buffer with cgc->buflen set to 24. If the device reports a block descriptor, the function increases cgc->buflen to include that descriptor and reads the page again. For CDROMVOLCTRL, the function then builds a MODE SELECT parameter list by moving cgc->buffer forward by offset - 8 bytes. This drops the block descriptor from the outgoing payload and leaves a new 8-byte mode parameter header in front of the audio control page. However, cgc->buflen is left unchanged. With a standard 8-byte block descriptor, cgc->buffer points at buffer + 8 but cgc->buflen remains 32. cdrom_mode_select() therefore asks the low level packet path to write 32 bytes from that adjusted pointer, reading 8 bytes past the end of the 32-byte stack buffer. This is not hit by CDROMVOLREAD, and CDROMVOLCTRL only triggers it on drives that return a non-zero block descriptor length, which helps explain why it has gone unnoticed. The overread is also sent to the device as extra MODE SELECT payload, so it may not produce an obvious local failure. Reduce cgc->buflen by the same amount as the buffer pointer adjustment so the MODE SELECT transfer covers only the intended parameter list. | ||||
| CVE-2026-68188 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Fix session UAF in set_termios rfcomm_tty_set_termios() tests dlc->session without rfcomm_mutex and later passes the pointer to rfcomm_send_rpn(). The latter dereferences both session->initiator and session->sock. Meanwhile, krfcommd can unlink the DLC and free the session while holding rfcomm_mutex. The race can proceed as follows: TTY ioctl task krfcommd -------------- -------- load dlc->session enter rfcomm_send_rpn() lock rfcomm_mutex clear dlc->session free session unlock rfcomm_mutex read session->initiator KASAN reported: BUG: KASAN: slab-use-after-free in rfcomm_send_rpn+0x297/0x2a0 Read of size 4 at addr ffff88810012a850 by task poc/92 Call Trace: rfcomm_send_rpn+0x297/0x2a0 rfcomm_tty_set_termios+0x50d/0x850 tty_set_termios+0x596/0x950 set_termios+0x46a/0x6e0 tty_mode_ioctl+0x152/0xbd0 tty_ioctl+0x915/0x1240 __x64_sys_ioctl+0x134/0x1c0 Allocated by task 92: rfcomm_session_add+0x9e/0x2e0 rfcomm_dlc_open+0x8b1/0xe00 rfcomm_dev_activate+0x85/0x1a0 rfcomm_tty_open+0x90/0x280 Freed by task 68: kfree+0x131/0x3c0 rfcomm_session_del+0x119/0x180 rfcomm_run+0x737/0x4710 Add rfcomm_dlc_send_rpn(), which holds rfcomm_mutex while it verifies that the DLC is still attached and sends the RPN frame. Have the TTY path use the helper and drop its unlocked session check. This keeps the session valid through both the frame construction and socket send. | ||||
| CVE-2026-68191 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath12k: fix NULL pointer dereference in rhash table destroy When unbinding the ath12k driver, kernel NULL pointer dereferences occur in irq_work_sync() called from rhashtable_destroy(). Two hash tables are affected: 1. ath12k_link_sta hash table in ath12k_base 2. ath12k_dp_link_peer hash table in ath12k_dp The issue happens because the destroy functions are called unconditionally in cleanup paths, but the hash tables are only initialized late in their respective init functions. If the device was never fully started or if the init functions failed before initializing the hash tables, the pointers will be NULL. The issues are always reproducible from a VM because the MSI addressing initialization is failing. Call trace for ath12k_link_sta_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_link_sta_rhash_tbl_destroy+0x19/0x40 [ath12k] ath12k_core_stop+0xe/0x80 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Call trace for ath12k_dp_link_peer_rhash_tbl_destroy: RIP: irq_work_sync+0x1e/0x70 rhashtable_destroy+0x12/0x60 ath12k_dp_link_peer_rhash_tbl_destroy+0x29/0x50 [ath12k] ath12k_dp_cmn_device_deinit+0x21/0x140 [ath12k] ath12k_core_hw_group_cleanup+0x6b/0xb0 [ath12k] ath12k_pci_remove+0x60/0x110 [ath12k] Fix this by adding NULL checks before calling rhashtable_destroy() in both destroy functions. The NULL check approach was chosen because the rhashtable pointer serves as the initialization state indicator. The init can fail at various points, leaving some components uninitialized. Checking the pointer directly is simpler than adding separate state flags that would need synchronization. | ||||
| CVE-2026-68250 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/sdma5.2: replace BUG_ON() with WARN_ON() There's no need to crash the kernel for these cases. (cherry picked from commit ae658afc7f47f6147371ec42cc6b1a793dfdb5af) | ||||
| CVE-2026-13328 | 2026-08-13 | N/A | ||
| The Food Menu WordPress plugin before 6.0.2 does not perform any capability or ownership check on its reservation-status update action, which is also exposed to unauthenticated users and gated only by a nonce that is publicly available to visitors, allowing unauthenticated attackers to change the status of arbitrary reservations. | ||||
| CVE-2026-3639 | 2026-08-13 | 6.4 Medium | ||
| The PPWP – Password Protect Pages plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `ppwp` shortcode attributes in all versions up to, and including, 1.9.21 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. | ||||
| CVE-2026-11840 | 1 Zohocorp | 2 Manageengine Pam360, Manageengine Password Manager Pro | 2026-08-13 | 8.8 High |
| Zohocorp ManageEngine Password Manager Pro versions before 13232 and ManageEngine PAM360 versions before 8552 are vulnerable to authenticated SQL injection. | ||||
| CVE-2026-68189 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 remove_uuid+0x25e/0x560 hci_sock_sendmsg+0x1033/0x1ea0 Hold hdev->lock while generating and committing the class-of-device and EIR snapshots. Release it before sending an HCI command, so controller waits do not happen under the device lock. This protects all UUID list walks in these paths and restores the serialization lost in the command sync conversion. | ||||
| CVE-2026-68203 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: fix cleanup bugs in vivid_init() When platform_device_register() fails in vivid_init(), the embedded struct device in vivid_pdev has already been initialized by device_initialize(), but the failure path jumps to free_output_strings without dropping the device reference for the current platform device: vivid_init() -> platform_device_register(&vivid_pdev) -> device_initialize(&vivid_pdev.dev) -> setup_pdev_dma_masks(&vivid_pdev) -> platform_device_add(&vivid_pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before jumping to the common cleanup path. Also, the unreg_driver label incorrectly calls platform_driver_register() instead of platform_driver_unregister(), which breaks cleanup when workqueue creation fails after successful driver registration. Fix that as well. The reference leak was identified by a static analysis tool I developed and confirmed by manual review. The incorrect cleanup call was found during code inspection. | ||||
| CVE-2026-68221 | 1 Linux | 1 Linux Kernel | 2026-08-13 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: media: nuvoton: npcm-video: fix memory leaks in probe and remove npcm_video_probe() allocates the npcm_video structure with kzalloc_obj() but never frees it on any probe error path or in npcm_video_remove(), leaking the allocation on every failed probe and every normal unbind. Additionally, when npcm_video_setup_video() fails, the reserved memory association established by of_reserved_mem_device_init() in npcm_video_init() is not released, leaking the rmem_assigned_device entry on the global list. Fix both by adding kfree(video) to all probe error paths and to npcm_video_remove(), and adding the missing of_reserved_mem_device_release() call when npcm_video_setup_video() fails. | ||||
| CVE-2026-68240 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/gpusvm: publish dpagemap early to avoid device mapping leak on error drm_gpusvm_get_pages() only stored the local dpagemap into svm_pages->dpagemap on the success path. If a later page failed (e.g. -EOPNOTSUPP when ctx->allow_mixed is false) and jumped to err_unmap, svm_pages->dpagemap was still NULL, so __drm_gpusvm_unmap_pages() skipped device_unmap() and leaked the device mappings already created. Assign svm_pages->dpagemap when the first device page is mapped so the err_unmap path can device_unmap() those mappings. This issue was found by Sashiko AI review. | ||||
| CVE-2026-68198 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix use-after-free in aggr_reset_state() The aggr_reset_state() function uses timer_delete() (non-synchronous) for the aggregation timer before proceeding to delete TID state and before the structure is freed by callers like aggr_module_destroy(). If the timer callback (aggr_timeout) is executing when aggr_reset_state() is called, the callback will continue to access aggr_conn fields like rx_tid[] and stat[] which may be freed immediately after by kfree(aggr_info->aggr_conn) in aggr_module_destroy(). Additionally, the timer callback can re-arm itself via mod_timer() while aggr_reset_state() is running, creating a more complex race condition. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-68204 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: media: vivid: check for vb2_is_busy() when toggling caps The vivid_update_format_cap/out() functions must only be called if the capture/output queue are not busy. But for the controls that select the CROP/COMPOSE/SCALE capability that is not checked. Only when streaming starts will they be set to 'grabbed' and it is impossible to change the control, but between REQBUFS and STREAMON you are still allowed to set these controls. Since vivid_update_format_cap/out will change the format, this can cause unexpected results. Besides adding these checks, also add a WARN_ON in vivid_update_format_cap/out() if the queue is busy. I'm 90% certain that this is the cause of this syzbot bug: https://syzkaller.appspot.com/bug?extid=dac8f5eaa46837e97b89 But since we never have reproducers, it is hard to be certain. In any case, these checks are needed regardless. | ||||