Export limit exceeded: 410490 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (410490 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-63832 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: add wcid publish check in mt76_sta_add Since mt7925_mac_sta_add publishes wcid, add publish check in mt76_sta_add to avoid reinitializing the wcid->poll_list. Found dev->sta_poll_list corruption when using mt7925 and 7.1-rc4. According to the corruption information, prev->next was changed to itself. wlan0: disconnect from AP 90:fb:5d:94:8b:e3 for new auth to 90:fb:5d:94:8b:e2 wlan0: authenticate with 90:fb:5d:94:8b:e2 (local address=84:9e:56:9c:7e:6b) wlan0: send auth to 90:fb:5d:94:8b:e2 (try 1/3) slab kmalloc-8k start ffff8c80958a6000 pointer offset 4160 size 8192 list_add corruption. prev->next should be next (ffff8c808a7488f8), but was ffff8c80958a7040. (prev=ffff8c80958a7040). mt76_wcid_add_poll+0x95/0xd0 [mt76] mt7925_mac_add_txs.part.0+0xa5/0xe0 [mt7925_common] mt7925_rx_check+0xa7/0xc0 [mt7925_common] mt76_dma_rx_poll+0x50d/0x790 [mt76] mt792x_poll_rx+0x52/0xe0 [mt792x_lib] | ||||
| CVE-2026-63831 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mac802154: llsec: add skb_cow_data() before in-place crypto llsec_do_encrypt_unauth(), llsec_do_encrypt_auth(), llsec_do_decrypt_unauth(), and llsec_do_decrypt_auth() all perform in-place cryptographic transformations on skb data. They build a scatterlist with sg_init_one() pointing into the skb's linear data area and then pass the same scatterlist as both src and dst to the crypto API (e.g. crypto_skcipher_encrypt/decrypt, crypto_aead_encrypt/decrypt). On the RX path, __ieee802154_rx_handle_packet() clones the received skb before handing it to each subscriber via ieee802154_subif_frame(). The cloned skb shares the same underlying data buffer via reference counting. When llsec_do_decrypt() subsequently modifies this shared buffer in place, it corrupts data that other clones -- potentially belonging to other sockets or subsystems -- still reference. On the TX path, similar data sharing can occur when an skb's head has been cloned (skb_cloned() returns true). The fix is to call skb_cow_data() before performing any in-place crypto operation. skb_cow_data() ensures that the skb's data area is not shared: if the skb head is cloned or the data spans multiple fragments, it copies the data into a private buffer that can be safely modified in place. This is the same pattern used by: - ESP (net/ipv4/esp4.c, net/ipv6/esp6.c) - MACsec (drivers/net/macsec.c) - WireGuard (drivers/net/wireguard/receive.c) - TIPC (net/tipc/crypto.c) Without this guard, in-place crypto on shared skb data leads to: - Silent data corruption of other skb clones - Use-after-free when the crypto API scatterwalk writes through a page that has already been freed by another clone's kfree_skb() - Kernel crashes under concurrent 802.15.4 traffic with security enabled (KASAN/KMSAN reports slab-use-after-free) Found by 0sec (https://0sec.ai) using automated source analysis. | ||||
| CVE-2026-63830 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: skmsg: preserve sg.copy across SG transforms The sk_msg sg.copy bitmap is part of the scatterlist entry ownership state. A set bit tells sk_msg_compute_data_pointers() not to expose the entry through writable BPF ctx->data. This protects entries backed by pages that are not private to the sk_msg, such as splice-backed file page-cache pages. Several sk_msg transform paths move, copy, split, or compact msg->sg.data[] entries without moving the matching sg.copy bit. This can make an externally backed entry arrive at a new slot with a clear copy bit. A later SK_MSG verdict can then expose sg_virt(sge) as writable ctx->data and BPF stores can modify the original page cache. Keep sg.copy synchronized with sg.data[] whenever entries are transferred, shifted, split, or copied into a new sk_msg. Clear the bit when an entry is replaced by a newly allocated private page or freed. This covers the BPF pull/push/pop helpers, sk_msg_shift_left/right(), sk_msg_xfer(), and tls_split_open_record(), including the partial tail entry created during TLS open-record splitting. | ||||
| CVE-2026-63829 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: ip_gre: require CAP_NET_ADMIN in the device netns for changelink A tunnel changelink() operates on at most two netns, dev_net(dev) and the tunnel link netns t->net. They differ once the device is created in or moved to a netns other than the one the request runs in. The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a caller privileged there but not in t->net can rewrite a tunnel that lives in t->net. Add rtnl_dev_link_net_capable() next to rtnl_get_net_ns_capable() in net/core/rtnetlink.c. It requires CAP_NET_ADMIN in the link netns and is skipped when the link netns is dev_net(dev), where the rtnl path already checked it. The other patches in this series use the same helper. Gate ipgre_changelink() and erspan_changelink() with it, at the top of the op before any attribute is parsed, because the parsers update live tunnel fields first. ipgre_netlink_parms() sets t->collect_md before ip_tunnel_changelink() runs. Commit 8b484efd5cb4 ("ip6: vti: Use ip6_tnl.net in vti6_siocdevprivate().") added the same check on the ioctl path. This adds it on RTM_NEWLINK. | ||||
| CVE-2026-63823 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: keys: Pin request_key_auth payload in instantiate paths A: request_key() B: KEYCTL_INSTANTIATE_IOV ================ ========================= create auth key store rka in auth key wait for helper get auth key load rka from auth key copy user payload sleep on #PF helper completed detach and free rka destroy auth key wake up use rka->target_key **USE-AFTER-FREE** Give request_key_auth payloads a refcount. Take a payload reference while authkey->sem stabilizes the payload and revocation state. Hold that reference across the instantiate and reject paths. Drop the auth key owning reference from revoke and destroy. [jarkko: Replaced the first two paragraphs of text with an actual concurrency scenario.] | ||||
| CVE-2026-63809 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: use kvfree() for replaced sysctl write buffer proc_sys_call_handler() allocates its temporary sysctl buffer with kvzalloc() and passes it to __cgroup_bpf_run_filter_sysctl(). Since kvzalloc() may fall back to vmalloc() for large allocations, freeing that buffer with kfree() is wrong and can corrupt memory. Use kvfree() to safely handle both kmalloc and kvzalloc()/vmalloc allocations. The bug was first flagged by an experimental analysis tool we are developing for kernel memory-management bugs while analyzing v6.13-rc1. The tool is still under development and is not yet publicly available. Manual inspection confirms that the bug is still present in v7.1-rc5. Reproduced the bug based on v7.1-rc4 in a QEMU x86_64 guest booted with KASAN and CONFIG_FAILSLAB enabled. To exercise the replacement path, the test tree also included the accompanying fix for the stale ret == 1 check in __cgroup_bpf_run_filter_sysctl(). The reproducer confines failslab injections to the proc_sys_call_handler() range, uses stacktrace-depth=32, and injects fail-nth=1 while writing 8191 bytes to /proc/sys/kernel/domainname from a task in the target cgroup. Under that setup, fail-nth=1 triggered the fault: BUG: unable to handle page fault for address: ffffeb0200024d48 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 SMP KASAN NOPTI CPU: 2 UID: 0 PID: 209 Comm: repro_proc_sys_ Not tainted 7.1.0-rc4-00686-g97625979a5d4 PREEMPT(lazy) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014 RIP: 0010:kfree+0x6e/0x510 ... Call Trace: <TASK> ? __cgroup_bpf_run_filter_sysctl+0x626/0xc30 __cgroup_bpf_run_filter_sysctl+0x74d/0xc30 ? __pfx___cgroup_bpf_run_filter_sysctl+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? __kvmalloc_node_noprof+0x345/0x870 ? proc_sys_call_handler+0x250/0x480 ? srso_return_thunk+0x5/0x5f proc_sys_call_handler+0x3a2/0x480 ? __pfx_proc_sys_call_handler+0x10/0x10 ? srso_return_thunk+0x5/0x5f ? selinux_file_permission+0x39f/0x500 ? srso_return_thunk+0x5/0x5f ? lock_is_held_type+0x9e/0x120 vfs_write+0x98e/0x1000 ... </TASK> With this fix applied on top of the same test setup, rerunning the reproducer with fail-nth=1 yields no corresponding Oops reports. | ||||
| CVE-2026-63808 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: exfat: fix potential use-after-free in exfat_find_dir_entry() In exfat_find_dir_entry(), the buffer_head obtained from exfat_get_dentry() is released with brelse(bh) before the fall-through TYPE_EXTEND branch reads the directory entry through ep (which points into bh->b_data): brelse(bh); if (entry_type == TYPE_EXTEND) { ... len = exfat_extract_uni_name(ep, entry_uniname); ... } After brelse() drops our reference, nothing guarantees that the underlying page backing bh->b_data remains valid for the subsequent exfat_extract_uni_name() read. This is the same pattern fixed in commit fc961522ddbd ("exfat: Fix potential use after free in exfat_load_upcase_table()"). Move brelse(bh) so it runs after ep is no longer dereferenced on each branch. Confirmed on QEMU x86_64 with CONFIG_KASAN=y + CONFIG_DEBUG_PAGEALLOC=y + CONFIG_PAGE_POISONING=y on linux-next, using a crafted exFAT image (long filename with same-hash collisions forcing the TYPE_EXTEND path). With a debug-only invalidate_bdev() inserted between brelse(bh) and the ep read to make the stale-deref window deterministic, the unpatched kernel faults: BUG: KASAN: use-after-free in exfat_find_dir_entry+0x133b/0x15a0 BUG: unable to handle page fault for address: ffff88801a5fa0c2 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI RIP: 0010:exfat_find_dir_entry+0x1188/0x15a0 With this patch applied, the same instrumented harness completes cleanly under the same sanitizer stack. I have not reproduced a crash on an uninstrumented kernel under ordinary reclaim; the instrumented A/B establishes the lifetime violation and that the patch closes it, not an unaided triggerability claim. | ||||
| CVE-2026-63807 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: x86/mmu: Ensure hugepage is in by slot before checking max mapping level When recovering hugepages in the shadow MMU, verify that the base gfn of the shadow page is actually contained within the target memslot, *before* querying the max mapping level given the shadow page's gfn. Failure to pre-check the validity of the gfn can lead to an out-of-bounds access to the slot's lpage_info (which typically manifests as a host #PF because the lpage_info is vmalloc'd) if the guest creates a hugepage mapping (in its PTEs) that extends "below" the bounds of a memslot. When faulting in memory for a guest, and the size of the guest mapping is greater than KVM's (current) max mapping, then KVM will create a "direct" shadow page (direct in that there are no gPTEs to shadow, and so the target gfn is a direct calculation given the base gfn of the shadow page). The hugepage recovery flow looks for such direct shadow pages, as forcing 4KiB mappings when dirty logging generates the guest > host mapping size case. When the 4KiB restriction is lifted, then KVM can replace the shadow page with a hugepage. But if KVM originally used a smaller mapping than the guest because the range of memory covered by the guest hugepage exceeds the bounds of a memslot, then KVM will link a direct shadow page with a gfn that is outside the bounds of the memslot being used to fault in memory. The rmap entry added for the leaf mapping is correct and within bounds, but the gfn of the leaf SPTE's parent shadow page will be out of bounds. BUG: unable to handle page fault for address: ffffc90000806ffc #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 100000067 P4D 100000067 PUD 1002a7067 PMD 10612f067 PTE 0 Oops: Oops: 0000 [#1] SMP CPU: 13 UID: 1000 PID: 757 Comm: mmu_stress_test Not tainted 7.1.0-rc1-48ce1e26eace-x86_pir_to_irr_comments-vm #341 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_max_mapping_level+0x79/0x2b0 [kvm] Call Trace: <TASK> kvm_mmu_recover_huge_pages+0x21b/0x320 [kvm] kvm_set_memslot+0x1ee/0x590 [kvm] kvm_set_memory_region.part.0+0x3a1/0x4d0 [kvm] kvm_vm_ioctl+0x9bf/0x15d0 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0xbb0 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f21c0f1a9bf </TASK> Don't bother pre-checking the bounds of the potential hugepage, i.e. don't check that e.g. sp->gfn + KVM_PAGES_PER_HPAGE(sp->role.level + 1) is also within the memslot, as the checks performed by kvm_mmu_max_mapping_level() are a superset of the basic bounds checks. I.e. pre-checking the full range would be a dubious micro-optimization. | ||||
| CVE-2026-63806 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: Replace guest-triggerable BUG_ON() in ioeventfd datamatch with get_unaligned() Drop a BUG_ON() that has been reachable since it was first added, way back in 2009, and instead use get_unaligned() to perform potentially-unaligned accesses. For a given store, KVM x86's emulator tracks the entire value in the destination operand, x86_emulate_ctxt.dst. If the destination is memory, and the target splits multiple pages and/or is emulated MMIO, then KVM handles each fragment independently. E.g. on a page split starting at page offset 0xffc, KVM writes 4 bytes to the first page, then the remaining bytes to the second page, using ctxt->dst as the source for both (with appropriate offsets). If the destination splits a page *and* hits emulated MMIO on the second page, then KVM will complete the write to the first page, then emulate the MMIO access to the second page. If there is a datamatch-enabled ioeventfd at offset 0 of the second page, then KVM will process the remainder of the store as a potential ioeventfd signal. Putting it all together, if the guest emits a store that splits a page starting at page offset N, and the second page has a datamatch-enabled ioeventfd at offset 0, then KVM will check for datamatch using &dst.valptr[N] as the source. Due to dst (and thus dst.valptr) being 32-byte aligned, if N is not aligned to @len, the BUG_ON() fires. E.g. with a 16-byte store at page offset 0xffc, to an ioeventfd of len 8, all initial checks in ioeventfd_in_range() will succeed, and the BUG_ON() fires due to @val being 4-byte aligned, but not 8-byte aligned. ------------[ cut here ]------------ kernel BUG at arch/x86/kvm/../../../virt/kvm/eventfd.c:783! Oops: invalid opcode: 0000 [#1] SMP CPU: 0 UID: 1000 PID: 615 Comm: repro Not tainted 7.1.0-rc2-ff238429d1ea #365 PREEMPT Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:ioeventfd_write+0x6c/0x70 [kvm] Call Trace: <TASK> __kvm_io_bus_write+0x85/0xb0 [kvm] kvm_io_bus_write+0x53/0x80 [kvm] vcpu_mmio_write+0x66/0xf0 [kvm] emulator_read_write_onepage+0x12a/0x540 [kvm] emulator_read_write+0x109/0x2b0 [kvm] x86_emulate_insn+0x4f8/0xfb0 [kvm] x86_emulate_instruction+0x181/0x790 [kvm] kvm_mmu_page_fault+0x313/0x630 [kvm] vmx_handle_exit+0x18a/0x590 [kvm_intel] kvm_arch_vcpu_ioctl_run+0xc81/0x1c90 [kvm] kvm_vcpu_ioctl+0x2d5/0x970 [kvm] __x64_sys_ioctl+0x8a/0xd0 do_syscall_64+0xb7/0x890 entry_SYSCALL_64_after_hwframe+0x4b/0x53 RIP: 0033:0x7f19c931a9bf </TASK> Modules linked in: kvm_intel kvm irqbypass ---[ end trace 0000000000000000 ]--- In a perfect world, the fix would be to simply delete the BUG_ON(), as KVM x86 doesn't perform alignment checks on "normal" memory accesses at CPL0. Sadly, C99 ruins all the fun; while the x86 architecture plays nice, dereferencing an unaligned pointer directly is undefined behavior in C, e.g. triggers splats when running with CONFIG_UBSAN_ALIGNMENT=y. | ||||
| CVE-2026-63802 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: blk-cgroup: fix UAF in __blkcg_rstat_flush() When multiple blkgs in the same blkcg are released concurrently, a use-after-free can occur. The race happens when one blkg's __blkcg_rstat_flush() removes another blkg's iostat entries via llist_del_all(). The second blkg sees an empty list and proceeds to free itself while the first is still iterating over its entries. Move the flush from __blkg_release() (RCU callback) to blkg_release() (before call_rcu). This ensures the RCU grace period waits for any concurrent flush's rcu_read_lock() section to complete before freeing. | ||||
| CVE-2026-53399 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: nfsd: release layout stid on setlease failure nfs4_alloc_stid() publishes the new stid into cl->cl_stateids via idr_alloc_cyclic() under cl_lock before returning to nfsd4_alloc_layout_stateid(). When nfsd4_layout_setlease() then fails, the error path frees the layout stateid directly with kmem_cache_free() without ever calling idr_remove(), leaving the IDR slot pointing at freed slab memory. Any subsequent IDR walker (states_show, client teardown) dereferences the dangling pointer. The correct teardown for an IDR-published stid is nfs4_put_stid(), which removes the IDR slot under cl_lock, dispatches sc_free (nfsd4_free_layout_stateid) to release ls->ls_file via nfsd4_close_layout(), and drops the nfs4_file reference in its tail. A second issue blocks that switch: nfsd4_free_layout_stateid() unconditionally inspects ls->ls_fence_work via delayed_work_pending() under ls_lock, but INIT_DELAYED_WORK(&ls->ls_fence_work, ...) currently runs only after the setlease call. On the setlease-failure path the destructor would touch an uninitialized delayed_work. nfsd4_alloc_layout_stateid() nfs4_alloc_stid() /* idr_alloc_cyclic under cl_lock */ nfsd4_layout_setlease() /* fails */ nfs4_put_stid() nfsd4_free_layout_stateid() delayed_work_pending(&ls->ls_fence_work) /* needs INIT */ nfsd4_close_layout() /* nfsd_file_put(ls->ls_file) */ put_nfs4_file() Fix by hoisting the ls_fenced / ls_fence_delay / INIT_DELAYED_WORK initialization above the nfsd4_layout_setlease() call, and replace the manual nfsd_file_put + put_nfs4_file + kmem_cache_free cleanup with a single nfs4_put_stid(stp). | ||||
| CVE-2026-53398 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: NFSD: Fix SECINFO_NO_NAME decode error cleanup nfsd4_decode_secinfo_no_name() currently initializes sin_exp after decoding sin_style. If the XDR stream is truncated, the decoder returns nfserr_bad_xdr before sin_exp is initialized. Since commit 3fdc54646234 ("NFSD: Reduce amount of struct nfsd4_compoundargs that needs clearing"), the inline iops array is not cleared between RPC calls. A failed SECINFO_NO_NAME decode can therefore leave sin_exp holding stale union contents from a previous operation. The error response path still invokes nfsd4_secinfo_no_name_release(), which calls exp_put() on a non-NULL sin_exp. Initialize sin_exp before the first failable decode step, matching nfsd4_decode_secinfo(). | ||||
| CVE-2026-53392 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: NFSv4/flexfiles: reject zero filehandle version count ff_layout_alloc_lseg() decodes the filehandle-version array count from the flexfiles layout body. The value is used as the count for kzalloc_objs(), and the current code only rejects NULL. A zero count yields ZERO_SIZE_PTR, which can be stored in dss_info->fh_versions even though later flexfiles paths assume that at least one filehandle version exists. Reject fh_count == 0 before the allocation, matching the existing zero version_count validation in the flexfiles GETDEVICEINFO parser. A QEMU/KASAN run with a malformed flexfiles layout hit: KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] RIP: 0010:ff_layout_encode_ff_layoutupdate.isra.0+0x15f/0x750 ff_layout_encode_layoutreturn+0x683/0x970 nfs4_xdr_enc_layoutreturn+0x278/0x3a0 Kernel panic - not syncing: Fatal exception The patched kernel rejects the malformed layout without KASAN/oops/panic, and a valid fh_count=1 regression still opens, reads, and unmounts cleanly. | ||||
| CVE-2026-53375 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: Prevent partial address patches In the case that only one of lo/hi is valid, the patching could result in a bad address written to in FW. | ||||
| CVE-2026-53374 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: zero-initialize GART table on allocation GART TLB is flushed after unmapping but not after mapping. Since amdgpu_bo_create_kernel() does not zero-initialize the buffer, when a single PTE is written the TLB may speculatively load other uninitialized entries from the same cacheline. Those garbage entries can appear valid, and a subsequent write to another PTE in the same cacheline may cause the GPU to use a stale garbage PTE from the TLB. Fix this by calling memset_io() to zero-initialize the GART table with gart_pte_flags immediately after allocation. Using AMDGPU_GEM_CREATE_VRAM_CLEARED, SDMA-based clear will not work since SDMA needs GART to be initialized to work. (cherry picked from commit d9af8263b82b6eaa60c5718e0c6631c5037e4b24) | ||||
| CVE-2026-53369 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: udf: reject descriptors with oversized CRC length udf_read_tagged() skips CRC verification when descCRCLength + sizeof(struct tag) exceeds the block size. A crafted UDF image can set descCRCLength to an oversized value to bypass CRC validation entirely; the descriptor is then accepted based solely on the 8-bit tag checksum, which is trivially recomputable. Reject such descriptors instead of silently accepting them. A legitimate single-block descriptor should never have a CRC length that exceeds the block. | ||||
| CVE-2026-53361 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: af_unix: Set gc_in_progress to true in unix_gc(). Igor Ushakov reported that unix_gc() could run with gc_in_progress being false if the work is scheduled while running: Thread 1 Thread 2 Thread 3 -------- -------- -------- unix_schedule_gc() unix_schedule_gc() `- if (!gc_in_progress) `- if (!gc_in_progress) |- gc_in_progress = true | `- queue_work() | unix_gc() <----------------/ | | |- gc_in_progress = true ... `- queue_work() | | `- gc_in_progress = false | | unix_gc() <---------------------------------------------' | ... /* gc_in_progress == false */ | `- gc_in_progress = false unix_peek_fpl() relies on gc_in_progress not to confuse GC by MSG_PEEK. Let's set gc_in_progress to true in unix_gc(). | ||||
| CVE-2026-53358 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: L2CAP: use chan timer to close channels in cleanup_listen() l2cap_chan_close() removes the channel from conn->chan_l, which must be done under conn->lock. cleanup_listen() runs under the parent sk_lock, so acquiring conn->lock would invert the established conn->lock -> chan->lock -> sk_lock order. Instead of calling l2cap_chan_close() directly, schedule l2cap_chan_timeout with delay 0 to close the channel asynchronously. The timeout handler already acquires conn->lock and chan->lock in the correct order. The timer is only armed when chan->conn is still set: if it is already NULL, l2cap_conn_del() has already processed this channel (l2cap_chan_del + l2cap_sock_teardown_cb + l2cap_sock_close_cb), so there is nothing left to do. If l2cap_conn_del() races in after the timer is armed, __clear_chan_timer() inside l2cap_chan_del() cancels it; if the timer has already fired, the handler returns harmlessly because chan->conn was cleared. | ||||
| CVE-2026-53356 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Fix phys BO pread/pwrite with offset sg_page() returns struct page pointer not (void *) so the scaling of pread/pwrite is wrong for phys BO and wrong parts of BO would be accessed if non-zero offset is used. Last impacted platform with overlay or cursor planes using phys mapping was Gen3/945G/Lakeport. (cherry picked from commit 3e49a2f85070b2fb672c1e0fdba281a4ea3aebe6) | ||||
| CVE-2026-53354 | 1 Linux | 1 Linux Kernel | 2026-10-19 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: errata: Mitigate TLBI errata on various Arm CPUs A number of CPUs developed by Arm suffer from errata whereby a broadcast TLBI;DSB sequence may complete before the global observation of writes which are translated by an affected TLB entry. These errata ONLY affect the completion of memory accesses which have been translated by an invalidated TLB entry, and these errata DO NOT affect the actual invalidation of TLB entries. TLB entries are removed correctly. This issue has been assigned CVE ID CVE-2025-10263. To mitigate this issue, Arm recommends that software follows any affected TLBI;DSB sequence with an additional TLBI;DSB, which will ensure that all memory write effects affected by the first TLBI have been globally observed. The additional TLBI can use any operation that is broadcast to affected CPUs, and the additional DSB can use any option that is sufficient to complete the additional TLBI. The ARM64_WORKAROUND_REPEAT_TLBI workaround is sufficient to mitigate the issue. Enable this workaround for affected CPUs, and update the silicon errata documentation accordingly. Note that due to the manner in which Arm develops IP and tracks errata, some CPUs share a common erratum number. | ||||