Export limit exceeded: 376903 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 21343 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (21343 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68406 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: cfg80211: validate PMSR FTM preamble range PMSR FTM request parsing accepts preamble values outside the enumerated nl80211 preamble range. Reject out-of-range values before using them in the parser capability bit test using the policy. [drop unnecessary check] | ||||
| CVE-2026-68407 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: nl80211: free RNR data on MBSSID mismatch nl80211_parse_beacon() rejects EMA RNR data when there are fewer RNR entries than MBSSID entries. The rejected RNR allocation has not been attached to the beacon data yet, so free it before returning the error. | ||||
| CVE-2026-68384 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.0 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/vf: Fix VF CCS attach/detach race with in-flight BO moves xe_bo_move() attaches VF CCS read/write batch buffers (BBs) to a BO after it transitions NULL/SYSTEM -> TT, and detaches them after it transitions TT -> SYSTEM. Both operations were done synchronously on the CPU immediately after building the move's copy/clear fence, without waiting for that fence to signal. This creates two races with VF migration: - Attach happens too late relative to the copy job it is meant to protect. If the copy job is submitted before the CCS BBs are attached, a VF migration event that pauses execution mid-copy can observe partially copied CCS metadata without the attach state needed to correctly save/restore it. - Detach happens too early relative to the copy job that moves data out of TT. The CCS BBs are torn down right after the copy fence is obtained, while the actual blit may still be in flight. A VF migration event that pauses execution mid-copy can then race the save/restore path against the still-running blit, and the CCS BBs it would need to make sense of the paused state have already been removed. Fix both races: - Move the attach call to before the copy/clear job is submitted, so the CCS BBs are already registered by the time the copy runs. On attach failure, unwind and bail out of the move. xe_migrate_ccs_rw_copy() now takes the destination resource explicitly, since bo->ttm.resource is not updated to the new resource until after the move commits. - Detach only after explicitly waiting for the copy fence to signal, instead of tearing down the CCS BBs immediately after obtaining it. While here, also fix xe_sriov_vf_ccs_attach_bo() to properly unwind and propagate errors: the per-context loop previously never broke out on error, silently discarding earlier failures. Unwind by clearing each attached context directly via xe_migrate_ccs_rw_copy_clear() instead of reusing xe_sriov_vf_ccs_detach_bo(), which requires both contexts to be attached before it will clean up either one. (cherry picked from commit d45ad0aa7a1eb5d7288b5ed948b05695611dc39e) | ||||
| CVE-2026-68385 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: s390/checksum: Fix csum_partial() without vector facility Currently csum_partial() calls csum_copy() with copy=false and dst=NULL. On machines without the vector facility, csum_copy() falls back to cksm(dst, ...), causing the checksum to be calculated from address zero instead of the source buffer. The VX implementation already checksums data loaded from src. Make the fallback do the same by passing src to cksm(). | ||||
| CVE-2026-68396 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: core: wake eh reliably when using scsi_schedule_eh Drivers which use the scsi_schedule_eh function to run the error handler currently risk the error handler thread never waking once all commands are timed out or inactive. There is no enforced memory order between setting the host into error recovery state and counting busy commands. This can result in a race with scsi_dec_host_busy where neither CPU sees both conditions of all commands inactive and the host error state to request waking the error handler. To fix this, run the scsi_schedule_eh's scsi_eh_wakeup from a new work item which will use rcu to ensure scsi_schedule_eh's call to scsi_host_busy will occur after the error state is globally visible and will be seen by any current scsi_dec_host_busy callers. | ||||
| CVE-2026-68307 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 4.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7925: fix crash in reset link replay During reset recovery, mt7925_vif_connect_iter() replays firmware state for links tracked in mvif->valid_links. After MLO link changes or MCU timeout recovery, the driver bitmap can temporarily contain a link whose mac80211 bss_conf has already gone away. This can pass a NULL bss_conf to mt76_connac_mcu_uni_add_dev(), matching the crash where x1, the second argument, is NULL: pc : mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] lr : mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] x2 : ffffff80a77f6018 x1 : 0000000000000000 x0 : ffffff8099402080 Call trace: mt76_connac_mcu_uni_add_dev+0x8c/0x1f8 [mt76_connac_lib] mt7925_vif_connect_iter+0x9c/0x168 [mt7925_common] mt7925_mac_reset_work+0x264/0x2f8 [mt7925_common] Skip missing bss_conf entries before replaying the link. Non-MLO AP/STA reset replay is unchanged because the helper still returns &vif->bss_conf for the legacy link. | ||||
| CVE-2026-68366 | 1 Linux | 1 Linux Kernel | 2026-08-11 | 6.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: usb: gadget: uvc: clamp SEND_RESPONSE length to the response buffer uvc_send_response() builds the UVC control response from a user-supplied struct uvc_request_data: req->length = min_t(unsigned int, uvc->event_length, data->length); ... memcpy(req->buf, data->data, req->length); req->length is clamped to uvc->event_length, which is taken from the host control request wLength (up to UVC_MAX_REQUEST_SIZE, 64), and to data->length, which comes from the UVCIOC_SEND_RESPONSE ioctl and is only checked for being negative. The source buffer data->data is only 60 bytes, so a response with uvc->event_length and data->length both greater than 60 makes memcpy() read past the end of data->data. Clamp req->length to sizeof(data->data) as well. | ||||
| CVE-2026-68331 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.9 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpaa2-eth: put MAC endpoint device on disconnect fsl_mc_get_endpoint() returns the MAC endpoint device with a reference taken through device_find_child(). The Ethernet connect path stores that device in mac->mc_dev and keeps it for the lifetime of the connected MAC object. However, the disconnect path only disconnects and closes the MAC before freeing the dpaa2_mac object. It does not drop the endpoint device reference stored in mac->mc_dev, so every successful connect leaks that device reference when the MAC is later disconnected. Drop the endpoint device reference after closing the MAC and before freeing the dpaa2_mac object. | ||||
| CVE-2026-68375 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Handle partially initialized auxiliary devices bnxt_aux_devices_init() calls auxiliary_device_init() before all fields used by bnxt_aux_dev_release() are initialized. After auxiliary_device_init() succeeds, later errors must unwind with auxiliary_device_uninit(), which invokes the release callback. The release callback assumes that aux_priv->id, aux_priv->edev, edev->net and edev->ulp_tbl are all populated. If allocation fails after auxiliary_device_init(), the release path can otherwise dereference or clear partially initialized state. Allocate and attach the bnxt_en_dev and ULP table before calling auxiliary_device_init(), so the release callback only sees a fully initialized auxiliary private object. If auxiliary_device_init() itself fails, free those allocations directly because device_initialize() has not run and the release callback will not be invoked. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68378 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: dpll: fix NULL pointer dereference in dpll_msg_add_pin_ref_sync() When a dpll_pin is shared across multiple dpll_device instances and those devices are being unregistered (e.g. during driver module removal), a NULL pointer dereference can occur in dpll_msg_add_pin_ref_sync(). This happens under the following conditions: - A pin is registered with two or more dpll devices (dpll_A, dpll_B) - The pin has ref_sync pairs with other pins - During unregistration of dpll_A's pins, a ref_sync partner pin is unregistered first, removing it from dpll_A->pin_refs - But since the partner pin is still registered with dpll_B, its dpll_refs is not empty, so dpll_pin_ref_sync_pair_del() does NOT run and the partner stays in the pin's ref_sync_pins xarray - When the pin itself is then unregistered from dpll_A, the delete notification calls dpll_msg_add_pin_ref_sync() which finds the partner in ref_sync_pins, passes dpll_pin_available() (partner is still registered with dpll_B), but dpll_pin_on_dpll_priv(dpll_A, partner) returns NULL because partner was already removed from dpll_A->pin_refs - The NULL priv pointer is passed to the driver's ref_sync_get callback, which dereferences it BUG: kernel NULL pointer dereference, address: 0000000000000034 Oops: Oops: 0000 [#1] SMP NOPTI RIP: 0010:zl3073x_dpll_input_pin_ref_sync_get+0x73/0x80 [zl3073x] Call Trace: dpll_msg_add_pin_ref_sync+0xb8/0x200 dpll_cmd_pin_get_one+0x3b6/0x4b0 dpll_pin_event_send+0x72/0x140 __dpll_pin_unregister+0x5a/0x2b0 dpll_pin_unregister+0x49/0x70 Fix this by skipping ref_sync pins whose priv pointer cannot be resolved for the current dpll device. | ||||
| CVE-2026-68310 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mt76: mt7915: guard HE capability lookups mt7915_mcu_bss_he_tlv() and mt7915_mcu_sta_bfer_tlv() both run after checking HE support, then dereference the HE PHY capability returned by mt76_connac_get_he_phy_cap(). That helper can return NULL when no capability entry matches the vif type. Fetch the capability before appending the TLV and skip the HE-specific setup when no matching capability is available. | ||||
| CVE-2026-68353 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.8 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware num_msg in TX complete handler The firmware-controlled num_msg field (u8, 0-255) drives the loop in ath6kl_wmi_tx_complete_event_rx() without validation against the buffer length. This allows out-of-bounds reads of up to 1020 bytes past the WMI event buffer when the firmware sends an inflated num_msg. Add a check that the buffer is large enough to hold the fixed struct and the num_msg variable-length entries. | ||||
| CVE-2026-68362 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath11k: fix NULL pointer dereference in ath11k_hal_srng_access_begin In ATH11K_QMI_EVENT_FW_READY, ATH11K_FLAG_REGISTERED is set unconditionally even when ath11k_core_qmi_firmware_ready() fails. This leaves the driver in an inconsistent state where initialization is considered complete although the firmware ready handling did not finish successfully. During the subsequent SSR, the driver enters the restart path based on this incorrect state and dereferences uninitialized srng members, resulting in a NULL pointer dereference. Call trace: ath11k_hal_srng_access_begin+0xc/0x60 [ath11k] (P) ath11k_ce_cleanup_pipes+0x17c/0x180 [ath11k] ath11k_core_restart+0x40/0x168 [ath11k] Fix this by: - skipping firmware_ready if ATH11K_FLAG_REGISTERED is already set - setting ATH11K_FLAG_REGISTERED only when firmware_ready succeeds - setting ATH11K_FLAG_QMI_FAIL and aborting the FW_READY handling on error Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.2.0.c2-00204-QCAMSLSWPLZ-1 | ||||
| CVE-2026-68337 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject redirect helpers without a bpf_net_context The bpf_redirect*() helpers and skb_do_redirect() obtain the per-task bpf_redirect_info via bpf_net_ctx_get_ri(), which dereferences the current->bpf_net_context unconditionally. That context is established on the paths that run tc BPF such as sch_handle_{ingress,egress}(), *except* for the case where {cls,act}_bpf was attached to a proper qdisc. A program running from there reaches the NULL deref in two ways: * It calls bpf_redirect() directly, which dereferences the context at the top of the helper: tc qdisc add dev eth0 root handle 1: red limit 1MB min 10KB max 20KB \ avpkt 1000 burst 100 qevent early_drop block 10 tc filter add block 10 pref 1 bpf obj redirect.o * It simply returns TC_ACT_REDIRECT without helper call: tcf_qevent_handle() then dispatches to skb_do_redirect(), which dereferences the context Rather than extending bpf_net_context management into the qdisc path, make the redirect helpers refuse to operate when no context exists, and have tcf_qevent_handle() drop a TC_ACT_REDIRECT verdict instead of calling skb_do_redirect(). Previous behaviour was a crash, so nothing regresses by not supporting it. | ||||
| CVE-2026-68339 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btusb: validate Realtek vendor event length btusb_recv_event_realtek() reads the event code at data[0] and the Realtek subevent code at data[2] before deciding whether to consume a vendor event as a coredump. For example, the two-byte event ff 00 contains a complete vendor-event header declaring zero parameters. The old classifier still reads a nonexistent third byte and can misclassify the event as a coredump if the adjacent byte is 0x34. Require the HCI event header and first parameter to be present before inspecting the Realtek subevent code. Short events continue through the normal HCI receive path, which owns their protocol validation. | ||||
| CVE-2026-68352 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 6.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix OOB read from firmware IE lengths in connect event The firmware-controlled beacon_ie_len, assoc_req_len, and assoc_resp_len fields in ath6kl_wmi_connect_event_rx() are not validated against the buffer length. Their sum (up to 765) can exceed the actual WMI event data, causing out-of-bounds reads during IE parsing and state corruption of wmi->is_wmm_enabled. Add a check that the total IE length fits within the buffer. | ||||
| CVE-2026-68354 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.3 Medium |
| In the Linux kernel, the following vulnerability has been resolved: firewire: net: Fix fragmented datagram reassembly fwnet_frag_new() keeps a sorted list of received fragments for a partial datagram. When a new fragment is adjacent to an existing fragment, the code checks whether the new fragment also closes the gap to the next or previous list entry. Those neighbor lookups currently assume that the current fragment always has a real next or previous fragment. At a list edge, the next or previous entry is the list head, not a struct fwnet_fragment_info. The gap checks also compare against the old edge of the current fragment instead of the edge after adding the new fragment. As a result, a fragment that bridges two existing ranges may leave two adjacent ranges unmerged, so fwnet_pd_is_complete() can miss a complete datagram. Check for the list head before looking up the neighboring fragment, and compare the neighbor against the new fragment's far edge when deciding whether to merge all three ranges. This issue was found by a static analysis checker and confirmed by manual source review. | ||||
| CVE-2026-68345 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.1 Medium |
| In the Linux kernel, the following vulnerability has been resolved: arm_mpam: guard MBWU state before adding it to garbage __destroy_component_cfg() adds each RIS mbwu_state object to the MPAM garbage list when destroying component configuration. However, mbwu_state is allocated per RIS and only for RISes with MBWU monitors. A component can therefore have comp->cfg allocated while some RISes still have ris->mbwu_state set to NULL. Passing a NULL mbwu_state to add_to_garbage() dereferences the NULL pointer inside the macro. Skip RISes that do not have an mbwu_state object before adding them to the garbage list. | ||||
| CVE-2026-68348 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 4.4 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: tas2781: bound firmware description string parsing The TAS2781 firmware parser reads several variable-length description strings with strlen() before checking that the string terminator is present inside the firmware blob. A malformed firmware image without a NUL terminator can therefore make the parser walk past the end of the firmware buffer before the later size checks run. Add a small bounded string-length helper and use it for all description fields that are parsed from the firmware buffer. Keep the existing size checks for the fixed bytes that follow each string. | ||||
| CVE-2026-68336 | 1 Linux | 1 Linux Kernel | 2026-08-10 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bonding: fix devconf_all NULL dereference when IPv6 is disabled When booting with the 'ipv6.disable=1' parameter, the devconf_all is never initialized because inet6_init() exits before addrconf_init() is called which initializes it. bond_send_validate(), however, will still call bond_ns_send_all() even ipv6 is indeed disabled. It will lead to NULL derefence of net->ipv6.devconf_all in ip6_pol_route(). BUG: kernel NULL pointer dereference, address: 000000000000000c [...] Workqueue: bond0 bond_arp_monitor [bonding] RIP: 0010:ip6_pol_route+0x69/0x480 [...] Call Trace: <TASK> ? srso_return_thunk+0x5/0x5f ? __pfx_ip6_pol_route_output+0x10/0x10 fib6_rule_lookup+0xfe/0x260 ? wakeup_preempt+0x8a/0x90 ? srso_return_thunk+0x5/0x5f ? srso_return_thunk+0x5/0x5f ? sched_balance_rq+0x369/0x810 ip6_route_output_flags+0xd7/0x170 bond_ns_send_all+0xde/0x280 [bonding] bond_ab_arp_probe+0x296/0x320 [bonding] ? srso_return_thunk+0x5/0x5f bond_activebackup_arp_mon+0xb4/0x2c0 [bonding] process_one_work+0x196/0x370 worker_thread+0x1af/0x320 ? srso_return_thunk+0x5/0x5f ? __pfx_worker_thread+0x10/0x10 kthread+0xe3/0x120 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x199/0x260 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Fix this by adding ipv6_mod_enabled() condition check in the caller. | ||||