Export limit exceeded: 378141 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378141 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72253 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_sip: validate skb_dst() before accessing it tc ingress and openvswitch do not guarantee routing information to be available. These subsystems use the conntrack helper infrastructure, and the SIP helper relies on the skb_dst() to be present if sip_external_media is set to 1 (which is disabled by default as a module parameter). This effectively disables the sip_external_media toggle for these subsystems without resulting in a crash. | ||||
| CVE-2026-72252 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_set_pipapo: don't leak bad clone into future transaction On memory allocation failure the cloned nft_pipapo_match can enter a bad state: - some fields can have their lookup tables resized while others did not - bits might have been toggled - scratch map can be undersized which also means m->bsize_max can be lower than what is required This means that the next insertion in the same batch can trigger out-of-bounds writes. Furthermore, a failure in the first can result in the bad clone to leak into the next transaction because the abort callback is never executed in this case (the upper layer saw an error and no attempt to allocate a transactional request was made). Record a state for the nft_pipapo_match structure: - NEW (pristine clone) - MOD (modified clone with good state) - ERR (potentially bogus content) Then make it so that deletes and insertions fail when the clone entered ERR state. In case the very first insert attempt results in an error, free the clone right away. | ||||
| CVE-2026-72251 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_nat_sip: reload possible stale data pointer quoting sashiko: ------------------------------------------------------------------------ [..] noticed a potential memory bug and header corruption involving the SIP NAT helper. In net/netfilter/nf_nat_sip.c:nf_nat_sip(): if (skb_ensure_writable(skb, skb->len)) { nf_ct_helper_log(skb, ct, "cannot mangle packet"); return NF_DROP; } uh = (void *)skb->data + protoff; uh->dest = ct_sip_info->forced_dport; if (!nf_nat_mangle_udp_packet(skb, ct, ctinfo, protoff, 0, 0, NULL, 0)) { If a cloned or fragmented SKB is reallocated by skb_ensure_writable(), the old data buffer is freed. However, nf_nat_sip() fails to update *dptr to point to the new buffer. It also appears to use nf_nat_mangle_udp_packet() on what could be a TCP packet, which would overwrite the sequence number with a checksum update. ------------------------------------------------------------------------ nf_conntrack_sip linerizes skbs, hence no fragmented skb can be seen. But clones are possible, so rebuild dptr. Disable nf_nat_mangle_udp_packet() branch for TCP streams. It doesn't look like this can ever happen, else we should have received bug reports about this, so just check the conntrack is UDP and drop otherwise. The calling conntrack_sip set ->forced_dport for SIP_HDR_VIA_UDP messages, so I don't think this is ever expected to be true for a TCP stream. | ||||
| CVE-2026-72250 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conntrack_reasm: guard mac_header adjustment after IPv6 defrag nf_ct_frag6_reasm() slides the packet head forward to drop the IPv6 fragment header and then unconditionally advances skb->mac_header: skb->mac_header += sizeof(struct frag_hdr); On the NF_INET_LOCAL_OUT defrag path the skb has no link-layer header yet, so skb->mac_header is still the "not set" sentinel (u16)~0U. Adding sizeof(struct frag_hdr) wraps it to a small value (0xffff + 8 == 7), after which skb_mac_header_was_set() wrongly reports a MAC header is present and skb_mac_header() points into the headroom. The reassembler has done this unconditional add since it was introduced; it was harmless while mac_header was a bare pointer, but wrong once mac_header became a u16 offset whose unset state is the ~0U sentinel tested by skb_mac_header_was_set(). The sibling net/ipv6/reassembly.c does the same relocation and does guard the adjustment; mirror the guard here. | ||||
| CVE-2026-72249 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: use dst in this direction when pushing IPIP header When pushing the IPIP header, the route of the other direction is used to calculate the headroom, use the route in this direction. Accessing the other tuple to set the IP source and destination is fine because this tuple does not provide such information to avoid storing redundant information. However, this tuple already provides the dst for this direction, this went unnoticed because this bug affects headroom and iph->frag_off only at this stage. | ||||
| CVE-2026-72248 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: support IPIP tunnel with direct xmit The combination of IPIP tunnel with direct xmit, eg. bridge device, breaks because no dst_entry is provided to check the skb headroom and to set the iph->frag_off field. This leads to invalid dst usage and can trigger a crash in the tunnel transmit path. Fix this by moving dst_cache and dst_cookie out of the runtime union so that they can be shared by neighbour, xfrm, and direct tunnel flows. For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve route state in these shared fields and release it through the common dst release path. Since dst_entry is now available to the three supported xmit modes and dst_release() already deals with NULL dst, remove the xmit type check in nft_flow_dst_release(). Moreover, skip the check if the dst entry is NULL in nf_flow_dst_check() which is now the case for the direct xmit case. Based on patch from Rein Wei <n05ec@lzu.edu.cn>. | ||||
| CVE-2026-72247 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nf_conncount: fix zone comparison in tuple dedup The "already exists" dedup logic in __nf_conncount_add() decides whether a connection has already been counted and can be skipped instead of incrementing the connlimit count. It compares the conntrack zone of a list entry with the zone of the connection being added using nf_ct_zone_id() and nf_ct_zone_equal(), passing conn->zone.dir or zone->dir as the direction argument. Those helpers take enum ip_conntrack_dir values: IP_CT_DIR_ORIGINAL is 0 and IP_CT_DIR_REPLY is 1. However, zone->dir is a u8 bitmask: NF_CT_ZONE_DIR_ORIG is 1, NF_CT_ZONE_DIR_REPL is 2 and NF_CT_DEFAULT_ZONE_DIR is 3. Passing that bitmask as the enum direction shifts the meaning of every non-zero value. An ORIG-only zone passes 1 and is tested as REPLY, while REPL-only and default zones pass 2 or 3 and test bits beyond the valid direction range. In those cases nf_ct_zone_id() can fall back to NF_CT_DEFAULT_ZONE_ID instead of using the real zone id, so different zones can be treated as equal and dedup collapses to tuple equality alone. nf_conncount stores and compares the original-direction tuple for a connection. If an skb already has an attached conntrack entry, get_ct_or_tuple_from_skb() explicitly copies ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple, regardless of the packet's ctinfo. Therefore the zone comparison in the tuple dedup path must use IP_CT_DIR_ORIGINAL as well; the zone direction bitmask describes where a zone id applies, not which direction this conncount tuple represents. Fix the two dedup comparisons by passing IP_CT_DIR_ORIGINAL directly. Do not special-case NF_CT_DEFAULT_ZONE_DIR and do not compare raw zone ids: using the existing helpers with IP_CT_DIR_ORIGINAL preserves the direction-aware NF_CT_DEFAULT_ZONE_ID fallback. A default bidirectional zone contains the ORIG bit, so it naturally returns the real zone id; reply-only zones continue to fall back for original-direction tuple comparisons. | ||||
| CVE-2026-72246 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: flowtable: use correct direction to set up tunnel route The layer 2 encapsulation and layer 3 tunnel information in the xmit path is taken from the other tuple, because the tunnel information that is included in the tuple for hashtable lookups is also used to perform the egress encapsulation in the transmit path. This patch uses the correct direction when setting up the tunnel, the original proposed patch to address this fix uses the reversed direction. While at it, remove the redundant check to call dst_release() to drop the reference on the dst that was obtained from the forward path, which is not useful in the direct xmit path unless tunneling is performed. | ||||
| CVE-2026-72245 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu: host1x: Fix device reference leak in host1x_device_parse_dt() error path After device_initialize(), the embedded struct device in struct host1x_device should be released through the device core with put_device(). In host1x_device_add(), if host1x_device_parse_dt() fails, the current error path frees the object directly with kfree(device). That bypasses the normal device lifetime handling and leaks the reference held on the embedded struct device. The issue was identified by a static analysis tool I developed and confirmed by manual review. Fix this by using put_device() in the host1x_device_parse_dt() failure path. | ||||
| CVE-2026-72244 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: gpu/buddy: bail out of try_harder when alignment cannot be honoured The try_harder contiguous fallback could return a range whose start offset did not match the caller's min_block_size. When a candidate's start is misaligned, realign it: free the misaligned run and reallocate exactly @size at the next lower min_block_size boundary. This keeps the returned size unchanged with no surplus to trim, and rejects the request only when no aligned candidate fits. v2: align misaligned candidates down to min_block_size instead of bailing out, for both the RHS and LHS paths (Matthew). | ||||
| CVE-2026-72243 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: check connect-related permissions on TCP Fast Open Similar to Landlock, SELinux was not updated when TCP Fast Open support was introduced to ensure connect-related permissions are checked when using TCP Fast Open. Update its socket_sendmsg() hook to call selinux_socket_connect() when MSG_FASTOPEN is passed. | ||||
| CVE-2026-72242 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: selinux: avoid sk_socket dereference in selinux_sctp_bind_connect() selinux_sctp_bind_connect() dereferences sk->sk_socket to pass a struct socket * to selinux_socket_bind() and selinux_socket_connect_helper(). However, when the hook is invoked from the ASCONF softirq path (sctp_process_asconf), there is no file reference guaranteeing that sk->sk_socket is non-NULL. The setsockopt callers (bindx, connectx, set_primary, sendmsg connect) hold a file reference and are not affected. Both selinux_socket_bind() and selinux_socket_connect_helper() immediately resolve sock->sk, never using the struct socket * for anything else. Refactor the inner logic into helpers that take a struct sock * directly so that selinux_sctp_bind_connect() never needs to touch sk->sk_socket at all. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72240 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mfd: sm501: Fix reference leak on failed device registration When platform_device_register() fails in sm501_register_device(), the embedded struct device in pdev has already been initialized by device_initialize(), but the failure path only reports the error and returns without dropping the device reference for the current platform device: sm501_register_device() -> platform_device_register(pdev) -> device_initialize(&pdev->dev) -> setup_pdev_dma_masks(pdev) -> platform_device_add(pdev) This leads to a reference leak when platform_device_register() fails. Fix this by calling platform_device_put() before returning the error. The issue was identified by a static analysis tool I developed and confirmed by manual review. | ||||
| CVE-2026-72239 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN" Revert 99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"). Section 8.8 of the SNP spec says: Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure that no CPUs contain dirty cache lines for the memory containing the RMP. Cachelines can be moved from cache to cache in a dirty state. The wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but if the IPIs for WBINVD race with this dirty cacheline movement, it is possible that they may not get flushed, violating the firmware requirement. Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP table is not yet in use. [ Heroically bisected by Srikanth. ] [ bp: Massage commit message. ] | ||||
| CVE-2026-72238 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: x86/boot: Validate console=uart8250 baud rate to fix early boot hang When the baud rate is empty, 0, invalid, or overflows to 0 when stored as an int, the system will hang during early boot because of a division by zero in early_serial_init(). Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent an early system hang. | ||||
| CVE-2026-72237 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: perf/x86/amd/brs: Fix kernel address leakage A user-only branch stack can contain branches that originate from the kernel. As a result, kernel addresses are exposed to user space even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries such as SYSRET/interrupt returns for which the branch-from addresses are in the kernel. E.g. $ perf record -j any,u -c 4000 -e branch-brs -o - -- \ perf bench syscall basic --loop 1000 | \ perf script -i - -F brstack|tr ' ' '\n'| \ grep -E '0x[89a-f][0-9a-f]{15}' ... 0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//- 0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//- 0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//- ... BRS provides no hardware branch filtering, so privilege level filtering is performed entirely in software. However, amd_brs_match_plm() only validates the branch-to address against the requested privilege levels. For branches from the kernel to user space, the branch-from address is left unchecked and is leaked. Extend the software filter to also validate the branch-from address, so that any branch record whose branch-from address is in the kernel is dropped when PERF_SAMPLE_BRANCH_USER is requested. | ||||
| CVE-2026-72236 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/perf_cpum_cf: Add missing array_index_nospec() to __hw_perf_event_init() ev variable is userspace controlled via event->attr.config and used as an array index after bounds checking, but without speculation barriers. Add the missing array_index_nospec() call to prevent speculative execution. | ||||
| CVE-2026-72235 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: retrieve ethhdr after potential skb realloc on RX pskb_may_pull() in batadv_interface_rx() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the VLAN header but missed for the ethernet header which is later used for the TT and AP isolation handling. | ||||
| CVE-2026-72234 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: access unicast_ttvn skb->data only after skb realloc The pskb_may_pull() called by batadv_get_vid() could reallocate the buffer behind the skb. Variables which were pointing to the old buffer need to be reassigned to avoid an use-after-free. This was done correctly for the ethernet header but missed for the unicast_packet pointer. | ||||