Export limit exceeded: 378312 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (378312 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72094 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dma-buf: dma-fence: Fix potential NULL pointer dereference The commit mentioned in the fixes tag below introduced a mechanism through which fence producers can fully decouple from fence consumers. This, desirable, mechanism is based on the fence's signaled-bit as the "decoupling point". A sophisticated interaction between RCU and atomic instructions attempts to ensure that fence consumers can still interact with fence producers through the dma_fence_ops (callback pointers into the producer). This is the desired behavior: to check for decoupling, the signaled-bit is first checked. If it's not yet signaled, RCU ensures that the ops pointer cannot yet be NULL. Hereby, dma_fence_signal_timestamp_locked() first sets the signaled-bit, and then sets the ops pointer to NULL. Readers first load the ops pointer, and then check through the signaled-bit whether the pointer can legally be accessed. These set and load operations could occur out of order on weakly ordered platforms. This problem can be solved very elegantly by using the ops pointer itself as the synchronization point. The pointer is either NULL, or cannot become NULL while it is being used thanks to RCU. Replace the signaled-bit check in dma_fence_timeline_name() and dma_fence_driver_name(). | ||||
| CVE-2026-72103 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm: avoid leaking the caller's thread keyring via the table device file The refactoring in commit a28d893eb327 ("md: port block device access to file") accidentally causes the caller's thread keyring to be kept alive long beyond the caller's lifetime. As a result, "cryptsetup luksSuspend" silently fails to wipe the LUKS volume key from memory. In detail: "cryptsetup luksOpen" uses its supposedly ephemeral thread keyring to pass the volume key to the kernel. dm-crypt's crypt_set_keyring_key() copies the key material into its own crypt_config structure and then drops its own reference to the key in the keyring with key_put(). With this fix, restoring pre-v6.9 behavior, the copy in the thread keyring is then promptly garbage collected, such that exactly one copy of the volume key remains. This single copy is correctly wiped from memory on "cryptsetup luksSuspend". Without this fix, the thread keyring and the volume key in it remains. This second copy is only freed on "luksClose". "luksSuspend" neither knows about this copy nor has any way to remove it, so the key remains recoverable from RAM after a suspend that is documented to have wiped it. This fix should not introduce new security problems, as the code is anyway gated by CAP_SYS_ADMIN. The device-mapper core, not the calling task, is the legitimate owner of this long-lived file. | ||||
| CVE-2026-72121 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add locking when updating filter and timer values KCSAN detected a simultaneous access to timer values that can be overwritten in bcm_rx_setup() when updating timer and filter content while bcm_rx_handler(), bcm_rx_timeout_handler() or bcm_rx_thr_handler() run concurrently on incoming CAN traffic. Protect the timer (ival1/ival2/kt_ival1/kt_ival2/kt_lastmsg) and filter (nframes/flags/frames/last_frames) updates in bcm_rx_setup() with a new per-op bcm_rx_update_lock, taken with the matching scope in the RX handlers. memcpy_from_msg() is staged into a temporary buffer before the lock is taken, since it can sleep and must not run under a spinlock. hrtimer_cancel() is always called without bcm_rx_update_lock held, since bcm_rx_timeout_handler()/bcm_rx_thr_handler() take the same lock and a running callback would otherwise deadlock against the canceller. Also close a related race: bcm_rx_setup() cleared the RTR flag in the stored reply frame's can_id as a separate, unprotected step after the frame content was already installed, so a concurrent bcm_rx_handler() could transmit a stale reply with CAN_RTR_FLAG still set. Fold that normalization into the initial frame preparation instead (on the staged buffer for updates, directly on op->frames pre-registration for new ops), so the installed frame is always atomically self-consistent. bcm_rx_handler()'s RX_RTR_FRAME check now takes a lock-protected snapshot of op->flags before deciding whether to call bcm_can_tx(), but does not hold the lock across that call. Also take a lock-protected snapshot of the currframe in bcm_can_tx() to avoid partly overwrites by content updates in bcm_tx_setup(). Finally check if a TX_RESET_MULTI_IDX/SETTIMER might have reset op->currframe between the two locked sections in bcm_can_tx(). Omit calling hrtimer_forward() with zero interval in bcm_rx_thr_handler(). kt_ival2 may have been concurrently cleared by bcm_rx_setup() before it cancels this timer, so check kt_ival2 inside the bcm_rx_update_lock. | ||||
| CVE-2026-72149 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: tegra: Fix burst size calculation Currently, the Tegra GPC DMA hardware requires the transfer length to be a multiple of the max burst size configured for the channel. When a client requests a transfer where the length is not evenly divisible by the configured max burst size, the DMA hangs with partial burst at the end. Fix this by reducing the burst size to the largest power-of-2 value that evenly divides the transfer length. For example, a 40-byte transfer with a 16-byte max burst will now use an 8-byte burst (40 / 8 = 5 complete bursts) instead of causing a hang. This issue was observed with the PL011 UART driver where TX DMA transfers of arbitrary lengths were stuck. | ||||
| CVE-2026-72025 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/monwriter: Reject buffer reuse with different data length When data buffers are reused, e.g. for interval sample records, the first record determines the data length, and the size of the buffer for user copy. Current monwriter code does not check if the data length was changed for subsequent records, which also would never happen for valid user programs. However, a malicious user could change the data length, resulting in out of bounds user copy to the kernel buffer, and memory corruption. By default, the monwriter misc device is created with root-only permissions, so practical impact is typically low. Fix this by checking for changed data length and rejecting such records. | ||||
| CVE-2026-72028 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: riscv: probes: save original sp in rethook trampoline Reading a word from the stack in a kretprobe crashes a risc-v kernel. $ cd /sys/kernel/tracing/ $ echo 'r n_tty_write $stack0' > dynamic_events $ echo 1 > events/kprobes/enable Unable to handle kernel paging request at virtual address 0000000200000128 ... [<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38 [<ffffffff80177196>] process_fetch_insn+0x3ee/0x760 [<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0 [<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58 [<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90 [<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108 [<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c [<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94 [<ffffffff8067872a>] tty_write+0x1a/0x30 In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value. arch_rethook_trampoline saves the registers from the probed function in a struct pt_regs. sp is not saved. Instead, sp is decremented for arch_rethook_trampoline's local stack. Fix this crash and save the original sp along with the other registers. Use a0 as a temporary register, it is overwritten anyway. [pjw@kernel.org: added Fixes tag; cc'ed stable] | ||||
| CVE-2026-72030 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ata: libata-core: Reject an invalid concurrent positioning ranges count ata_dev_config_cpr() takes the number of range descriptors from buf[0] of the concurrent positioning ranges log (up to 255), which the device reports independently of the log size in the GPL directory. The count is then walked at a fixed 32-byte stride in two places with no bound: the log read here, and the INQUIRY VPD page B9h emitter, which writes one descriptor per range into the fixed 2048-byte ata_scsi_rbuf. A device reporting a count larger than its own log overflows the read buffer (up to 7704 bytes past a 512-byte slab), and a count above 62 overflows the response buffer on the emit side. Bound the count once, on probe, against both the log the device returned and the number of descriptors the VPD B9h response buffer can hold (ATA_DEV_MAX_CPR, derived from the rbuf size). Reject an out-of-range count with a warning; this keeps the emitter in bounds with no separate change there. | ||||
| CVE-2026-72033 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: orangefs: keep the readdir entry size 64-bit in fill_from_part() fill_from_part() computes the size of a directory entry in size_t but stores it in a __u32. An entry length near U32_MAX wraps it to a small value, bypasses the bounds check, and is then used to index the entry, reading far past the directory part -- an out-of-bounds read that oopses the kernel. Compute the size as a u64 so it cannot truncate; the bounds check then rejects the entry. The trailer is supplied by the userspace client. | ||||
| CVE-2026-72035 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_taprio: Replace direct dequeue call with peek and qdisc_dequeue_peeked When taprio's software path peeks a non-work-conserving child qdisc, the child stashes the peeked skb in its gso_skb; taprio_dequeue_from_txq() then takes the packet with a direct child ->dequeue() call, which ignores that stash, orphans the peeked skb and desyncs the child's qlen/backlog. With a qfq child this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_red and sch_sfb now do. The helper returns the child's stashed skb first and is a no-op when there is none, so a work-conserving child is unaffected and the gated path now consumes the skb whose length was charged to the budget. | ||||
| CVE-2026-72036 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: sch_multiq: Replace direct dequeue call with peek and qdisc_dequeue_peeked multiq_dequeue() takes a packet from a band's child with a direct ->dequeue() call after multiq_peek() peeked it. When the child is non-work-conserving the peek stashes the skb in the child's gso_skb, so the direct dequeue returns a different skb and orphans the stash, desyncing the child's qlen/backlog. With a qfq child reached through a peeking parent (e.g. tbf) this re-enters the child on an emptied list and dereferences NULL, panicking the kernel from softirq on ordinary egress. Take the packet through qdisc_dequeue_peeked(), as sch_prio already does and as sch_red and sch_sfb were just fixed to do. The helper is a no-op when the child has no stash, so a work-conserving child is unaffected. | ||||
| CVE-2026-72078 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - validate control endpoint type The driver currently assumes that the first endpoint of the control interface is an interrupt IN endpoint without verifying it. A malicious device could provide a different endpoint type, which would then be passed to usb_fill_int_urb(), potentially leading to kernel warnings or undefined behavior. Verify that the control endpoint is an interrupt IN endpoint. | ||||
| CVE-2026-72096 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: make error counter atomic The error counter "v->corrupted_errs" was not atomic, thus it could be subject to race conditions. The call to dm_audit_log_target("max-corrupted-errors") may be skipped due to the races. | ||||
| CVE-2026-72105 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dm-log: fix a bitset_size overflow on 32bit machines Commit c20e36b7631d ("dm log: fix out-of-bounds write due to region_count overflow") made sure that region_count could fit in an unsigned int. But the bitmap memory isn't allocated based on region_count. It uses bitset_size (a size_t variable). The first step of calculating bitset_size is to set it to region_count, rounded up to a multiple of BITS_PER_LONG. If region_size is less than BITS_PER_LONG smaller than UINT_MAX, it will get rounded up to 2^32. On a 32bit architecture, this will make bitset_size wrap around to 0 and fail, despite region_count being valid. Since bitset_size gets divided by 8, it can hold any valid region_count. It just needs a special case to handle the rollover. If it is 0, the value rolled over, and bitset size should be set to the number of bytes needed to hold 2^32 bits. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72127 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netdev-genl: report NAPI thread PID in the caller's pid namespace netdev_nl_napi_fill_one() reports the NAPI kthread PID in NETDEV_A_NAPI_PID using task_pid_nr(), which returns the PID in the initial pid namespace. NETDEV_CMD_NAPI_GET does not have GENL_ADMIN_PERM and the netdev genl family is netnsok, so a caller in a child pid namespace can issue it. That caller then sees the kthread's global PID, even though the kthread is not visible in its pid namespace, where the value should be 0. Translate the PID through the caller's pid namespace, the same way commit 3799c2570982 ("io_uring/fdinfo: translate SqThread PID through caller's pid_ns") did for the io_uring SQPOLL thread. The doit and dumpit paths both run synchronously in the caller's context, so task_active_pid_ns(current) is the caller's pid namespace. | ||||
| CVE-2026-72154 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: Fix jump_label smp syncing The original commit 8c30b0018f9d ("openrisc: Add jump label support") copies from arm64 and does not properly consider how icache invalidation on remote cores works in OpenRISC. On OpenRISC remote icaches need to be invalidated otherwise static key's may remain state after updating. Fix SMP cache syncing by: 1. Properly invalidate remote core icaches on SMP systems by using icache_all_inv. The old code uses kick_all_cpus_sync() which runs a no-op IPI function call on remote CPU's which does execute a lot of code and flushes many cache lines in the process, but does not flush all and it's not correct on OpenRISC. 2. For architectures that do not have WRITETHROUGH caches be sure to flush the dcache after patching. To test this I first reproduced the issue using a custom test module [0]. The test confirmed that some icache lines maintained stale static_key code sequences after calling static_branch_enable(). After this patch there are no longer jump_label coherency issues. [0] https://github.com/stffrdhrn/or1k-utils/tree/master/tests/smp_static_key_test | ||||
| CVE-2026-72161 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: add journal NULL check in ocfs2_checkpoint_inode() During unmount, ocfs2_journal_shutdown() frees the journal and sets osb->journal to NULL. Later, when VFS evicts remaining cached inodes, ocfs2_evict_inode() -> ocfs2_clear_inode() -> ocfs2_checkpoint_inode() -> ocfs2_ci_fully_checkpointed() dereferences osb->journal, causing a NULL pointer dereference. Fix this by adding a NULL check for osb->journal in ocfs2_checkpoint_inode(). If the journal is NULL, it has already been fully flushed and destroyed during shutdown, so there is nothing to checkpoint. | ||||
| CVE-2026-72164 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ocfs2: avoid moving extents to occupied clusters For non-auto OCFS2_IOC_MOVE_EXT operations, userspace supplies a physical me_goal. ocfs2_move_extent() initializes new_phys_cpos from that goal and expects ocfs2_probe_alloc_group() to replace it with a free run in the target block group. The probe currently leaves *phys_cpos unchanged if the scan reaches the end of the group without finding a free run. An occupied goal at the last bit can therefore survive the probe and be passed to __ocfs2_move_extent(), which copies file data into a cluster still owned by another inode before the bitmap is updated. When the probe does find a free run, it also subtracts move_len from the ending bit. The start of an N-bit run ending at i is i - N + 1, so the current calculation can report the bit immediately before the free run. Clear *phys_cpos before scanning and use the correct free-run start. Callers already treat a zero result as -ENOSPC, so failed probes no longer continue with an occupied caller-controlled goal. | ||||
| CVE-2026-72170 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: 9p: skip nlink update in cacheless mode to fix WARN_ON v9fs_dec_count() unconditionally calls drop_nlink() on regular files, even when the inode's nlink is already zero. In cacheless mode the client refetches inode metadata from the server (the source of truth) on every operation, so by the time v9fs_remove() returns, the locally cached nlink may already reflect the post-unlink value: 1. Client initiates unlink, server processes it and sets nlink to 0 2. Client refetches inode metadata (nlink=0) before unlink returns 3. Client's v9fs_remove() completes successfully 4. Client calls v9fs_dec_count() which calls drop_nlink() on nlink=0 This race is easily triggered under heavy unlink workloads, such as stress-ng's unlink stressor, producing the following warning: WARNING: fs/inode.c:417 at drop_nlink+0x4c/0xc8 Call trace: drop_nlink+0x4c/0xc8 v9fs_remove+0x1e0/0x250 [9p] v9fs_vfs_unlink+0x20/0x38 [9p] vfs_unlink+0x13c/0x258 ... In cacheless mode the server is authoritative and the inode is on its way out, so locally adjusting nlink buys nothing. Skip v9fs_dec_count() entirely when neither CACHE_META nor CACHE_LOOSE is set, which both avoids the warning and removes a class of nlink races (two concurrent unlinkers observing nlink > 0 and both calling drop_nlink()) that an nlink == 0 guard alone would only narrow rather than close. | ||||
| CVE-2026-72263 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: SOF: topology: fix memory leak in snd_sof_load_topology When the topology filename contains "dummy" and tplg_cnt is 0, the function returns -EINVAL directly without freeing the tplg_files allocated by kcalloc() at line 2497. This leaks memory on every such topology load attempt. Fix this by setting ret = -EINVAL and jumping to the out: label, which already handles the kfree(tplg_files) cleanup. | ||||