Export limit exceeded: 409951 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 409951 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409951 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98609 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak when drm_gem_handle_create() fails virtio_gpu_gem_create() owns the reference taken by virtio_gpu_object_create(). On the drm_gem_handle_create() error path it calls drm_gem_object_release() instead of dropping that reference. drm_gem_object_release() is the inverse of drm_gem_object_init() and does not touch the reference count or call obj->funcs->free(), so it is only correct as the last step of a destructor, as in virtio_gpu_cleanup_object(). Using it here leaves the bo at refcount 1 with no remaining reference, so virtio_gpu_free_object() never runs and the shmem pages, sg table and virtio_gpu_object are leaked. Since virtio_gpu_object_create() has already set bo->created, VIRTIO_GPU_CMD_RESOURCE_UNREF is not queued either, leaking the host-side resource and the resource id. drm_gem_handle_create_tail() drops the handle reference on all of its internal error paths, so the caller only has to drop its own. Use drm_gem_object_put(), matching the success path below. | ||||
| CVE-2026-98608 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leak in virtio_gpu_resource_create_ioctl() virtio_gpu_resource_create_ioctl() calls drm_gem_object_release() on the drm_gem_handle_create() error path instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, its pages and sg table, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98607 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: fix object leaks in virtio_gpu_resource_create_blob_ioctl() virtio_gpu_resource_create_blob_ioctl() calls drm_gem_object_release() on both the virtio_gpu_resource_assign_uuid() and drm_gem_handle_create() error paths instead of dropping the reference it owns, so obj->funcs->free() never runs and the virtio_gpu_object, the resource id and the host-side resource are leaked. Use drm_gem_object_put() instead. | ||||
| CVE-2026-98606 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/virtio: release the GEM object on virtio_gpu_vram_create() errors virtio_gpu_vram_create() frees the object with a bare kfree(vram) on both error paths after drm_gem_private_object_init() has run, and on the second one after drm_gem_create_mmap_offset() has linked obj->vma_node into the device's VMA offset manager. The freed object stays in that interval tree, so a later lookup or insertion walks freed memory, and the dma_resv and gpuva lock are never destroyed. Call drm_gem_object_release() before kfree() on both paths. | ||||
| CVE-2026-98605 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: samsung-dsim: fix TE GPIO lifetime for host attach When the Exynos DSI driver was generalized into samsung-dsim, the TE GPIO acquisition was switched from gpiod_get_optional() to devm_gpiod_get_optional() while keeping the matching gpiod_put() calls. That combination is wrong for a managed descriptor. However, dropping the puts and keeping the managed get is also wrong: samsung_dsim_register_te_irq() runs from the DSI host attach callback, and host detach/reattach can happen without destroying the device that owns the managed action. A second attach would then request the GPIO again without having released it. Switch back to a non-managed gpiod_get_optional() and keep the explicit gpiod_put() on the request_irq() error path and in samsung_dsim_unregister_te_irq(). [Luca: remove unnecessary comment] | ||||
| CVE-2026-98604 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when learning local endpoint struct ovpn_bind is published through peer->bind with RCU, but local endpoint learning updates bind->local in place under peer->lock. UDP TX reads the field without that lock. In particular, a concurrent IPv6 update can therefore result in a torn address read. Use ovpn_peer_reset_sockaddr to publish a replacement bind when learning a new local endpoint, just as a remote endpoint change does. Preserve the current remote address and reset the dst cache only after the new bind has been published successfully. Track remote endpoint changes separately so that float notification and transport-address rehashing remain limited to actual peer floats. | ||||
| CVE-2026-98603 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ovpn: replace bind when clearing stale local source The UDP output fallback clears bind->local in place when the remembered source address is no longer usable. The bind is RCU-published and read locklessly by concurrent TX, so an IPv6 reader can observe a torn address. Retry the route lookup with source address autoselection without modifying the bind. After a successful lookup, revalidate the bind and route key under peer->lock, reset the dst cache, and best-effort publish a replacement bind with a wildcard local address. Do not cache the resolved dst when clearing the local source. Replacing the source invalidates all per-CPU cache entries, while dst_cache_set_ip4 and dst_cache_set_ip6 update only the current CPU slot. The current packet can still use the resolved route; if bind allocation fails, a later cache miss retries the repair. | ||||
| CVE-2026-98602 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: bnep: fix out-of-bounds reads on short RX/TX frames and control fallthrough Fix multiple out-of-bounds reads in Bluetooth BNEP frame processing: 1. In bnep_rx_frame() and bnep_ctrl_frame() (net/bluetooth/bnep/core.c), use pskb_may_pull() to verify the BNEP header, control type byte, filter count, and extension headers exist before reading them, and return 0 after handling BNEP_CONTROL instead of falling through to Ethernet frame submission when no extension headers follow. 2. In bnep_net_xmit() (net/bluetooth/bnep/netdev.c), verify skb->len >= ETH_HLEN with pskb_may_pull() before reading the 14-byte Ethernet header to prevent an out-of-bounds heap read and infoleak on short AF_PACKET TX frames. | ||||
| CVE-2026-98601 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: btintel_pcie: validate device-supplied DMA indices In btintel_pcie_msix_rx_handle(), the driver processes RX completion descriptors (urbd1) written by the PCIe device into DMA-coherent memory. urbd1->frbd_tag (a 16-bit field fully controlled by the device firmware via DMA) is used directly as an array index into rxq->bufs[] without any bounds check. rxq->bufs[] has only BTINTEL_PCIE_RX_DESCS_COUNT (64) entries, while frbd_tag can be any value 0-65535. A malicious or malfunctioning device can write an out-of-range frbd_tag, causing the driver to dereference an out-of-bounds data_buf pointer. Additionally, cr_hia is read from a DMA-shared index array also writable by the device; if the device sets cr_hia >= rxq->count, the while-loop never terminates because cr_tia is wrapped via modulo rxq->count and can never equal an out-of-range cr_hia. Add bounds validation for cr_hia and frbd_tag in the RX path, and cr_hia in the TX path. Log invalid values with bt_dev_err before returning. | ||||
| CVE-2026-98600 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: RFCOMM: Reject short EA=0 frames in rfcomm_recv_frame() While rfcomm_recv_frame() verifies that skb->len is at least sizeof(*hdr) + 1 (4 bytes: 3-byte header + 1-byte FCS), an RFCOMM frame with an extended 2-byte length field (!__test_ea(hdr->len)) has a 4-byte header plus a 1-byte FCS (5 bytes minimum, sizeof(*hdr) + 2). When a 4-byte RFCOMM frame with EA == 0 arrives: 1. The initial skb->len < sizeof(*hdr) + 1 check passes (4 < 4 is false). 2. Trimming the FCS byte decrements skb->len to 3. 3. If __check_fcs() succeeds, skb_pull(skb, 4) fails (4 > 3) and returns NULL without advancing skb->data. 4. Because the return value of skb_pull() is ignored, the un-pulled 3-byte struct rfcomm_hdr remains at skb->data and is either queued as application payload via rfcomm_recv_data() or parsed as a multiplexer control command via rfcomm_recv_mcc() on DLCI 0. Fix this by extending the length check in rfcomm_recv_frame() to also require skb->len >= sizeof(*hdr) + 2 when !__test_ea(hdr->len). | ||||
| CVE-2026-98599 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject non-negative offsets in stack_slot_obj_get_spi() bpf_get_spi() computes (-off - 1) / BPF_REG_SIZE using C division, which truncates toward zero. For off == 0, this produces spi 0, the same index used by the valid stack slot at fp-8. stack_slot_obj_get_spi() currently checks alignment and the resulting spi bounds, but does not reject the non-negative offset itself. It can therefore validate a PTR_TO_STACK register holding fp+0 against an iterator stored at fp-8 even though the runtime receives the actual fp+0 pointer. An effectful iterator kfunc can then interpret memory outside the BPF stack as iterator state. Reject non-negative offsets before converting the offset to an spi. All valid stack objects begin at a negative offset from the frame pointer. | ||||
| CVE-2026-98598 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Prevent rt6_insert_exception() for dying fib6_info. Before the cited commit, fib6_nh_flush_exceptions() always set from->exception_bucket_flushed = 1 under rt6_exception_lock to prevent rt6_insert_exception() from inserting a new exception for a dying fib6_info. The flag was replaced with the FIB6_EXCEPTION_BUCKET_FLUSHED bit stored in nh->rt6i_exception_bucket. The problem is that now the bit is only set when the bucket is not NULL and fib6_nh_flush_exceptions() is called from fib6_nh_release() after fib6_ref has already reached zero. If rt6_insert_exception() is called while the target fib6_info is being removed via fib6_purge_rt(), a new exception could be created successfully because rt6_flush_exceptions() no longer sets the bit. This creates a reference cycle between the fib6_info and the exception route, leaking the fib6_info, its nexthop device, and all per-CPU routes in fib6_nh->rt6i_pcpu, which stalls netdev unregistration. [ 34.680602] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 44.920675] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 [ 55.176582] unregister_netdevice: waiting for gre6 to become free. Usage count = 68 Let's call fib6_drop_pcpu_from() before rt6_flush_exceptions(), to set fib6_destroying before rt6_exception_lock, and check f6i->fib6_destroying in rt6_insert_exception(). Note that FIB6_EXCEPTION_BUCKET_FLUSHED logic is dead and we can clean it up in net-next. | ||||
| CVE-2026-98597 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: usb: sr9700: include receive overhead in the length check The receive fixup subtracts the Ethernet CRC from the reported packet length, but compares that payload length against the whole remaining receive buffer. The following copy starts after the three-byte header, and the cursor advance consumes both that header and the four-byte CRC. Require the payload to fit after SR_RX_OVERHEAD before copying it or advancing to the next packet. The loop already ensures that the remaining buffer is larger than the overhead, so the subtraction is safe. The issue was found by our static-analysis tool. | ||||
| CVE-2026-98596 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: Fix dst leak for uncached routes. ip6_route_output_flags(), ip6_rt_put_flags(), and ip6_dst_check() detect an uncached route by list_empty(&rt->dst.rt_uncached), which replaced the static DST_NOCACHE flag check in commit a4c2fd7f7891 ("net: remove DST_NOCACHE flag"). When a device is unregistered, rt6_uncached_list_flush_dev() unlinks uncached routes tied to the device from rt6_uncached_list. Previously, they were moved to another list with list_move() (__list_del_entry() + list_add()), and since commit 98aa546af5e4 ("inet: remove (struct uncached_list)->quarantine"), the routes are just unlinked with list_del_init(). If list_del_init() runs concurrently, list_empty() evaluates to true; ip6_route_output_flags() calls dst_hold_safe() incorrectly and ip6_rt_put_flags() skips ip6_rt_put(), leaking dst, and thus dev tied via rt->from as well. The same race is partially fixed by commit 9a6f0c4d5796 ("dst: fix races in rt6_uncached_list_del() and rt_del_uncached_list()"). Let's check rt6->dst.rt_uncached_list instead. Note that IPv4 does not have the same issue. | ||||
| CVE-2026-98595 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: udp: remove a disconnected socket from the 4-tuple hash table A UDP socket bound to a specific address and port keeps its entry in the 4-tuple hash table after it is disconnected: sk binds to 127.0.0.1:21001 sk connects to 127.0.0.2:20001 // filed in the 4-tuple table sk disconnects, connect(AF_UNSPEC) // still filed, peer now 0.0.0.0:0 __udp_disconnect() takes a socket out of that table only as a side effect of ->rehash() or ->unhash(), and it skips ->rehash() when SOCK_BINDADDR_LOCK is set and ->unhash() when SOCK_BINDPORT_LOCK is set. commit 6996a2d2d0a6 ("udp: Unhash auto-bound connected sk from 4-tuple hash table when disconnected.") fixed the same end state for a wildcard-bound socket, by a path this one does not take. The entry is counted whether or not anything hits it. hash4_cnt on the hash2 slot stays raised for as long as the socket lives, so udp_has_hash4() keeps sending every packet for that address and port through the 4-tuple lookup first. On IPv6 it can also be hit. __udp_disconnect() does not clear sk_v6_daddr, so udp_v6_rehash() files the entry under the peer the socket was connected to with a zero dport, and inet6_match() compares that same field: a datagram from the former peer with a zero source port matches, and source port zero is accepted on receive. On IPv4 the peer is cleared, so a match would need a zero source address as well, which the routing layer rejects as martian. The stale sk_v6_daddr is a separate defect, not addressed here; removing the entry closes this path either way. The entry can also be relocated. __udp_disconnect() clears sk_bound_dev_if, so a subsequent SO_BINDTODEVICE calls ->rehash(), and because the receive address is still specific udp_lib_rehash() moves the entry instead of removing it, into the bucket that (rcv_saddr, num, 0, 0) hashes to -- a pure function of the address and port, so every socket reaching this state on one address and port collects in one bucket. The bucket cannot be chosen from outside, as udp_ehashfn() is seeded with a per-boot secret. This last one became reachable only with commit 644f9108f3a5 ("udp: Make rehash4 independent in udp_lib_rehash()"), which moved the hash4 handling out of a branch a disconnected socket does not take; the stale entry itself dates from the commit in Fixes. Take the socket out of the table before __udp_disconnect() runs, while it still matches how it was filed. This also reaches the wildcard case ahead of udp_lib_rehash()'s udp_unhash4() branch, leaving that branch unreachable from udp_disconnect(); removing it belongs in net-next. udp_disconnect() and udp_abort() are the only UDP entries into __udp_disconnect(), which is shared with raw, ping and l2tp sockets that are not struct udp_sock: ping_prot.obj_size is sizeof(struct inet_sock), so udp_hashed4() on one would read past the allocation. | ||||
| CVE-2026-98594 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tg3: clean up PHYLIB resources on probe failure tg3_get_invariants() can register an MDIO bus and connect a PHY for USE_PHYLIB devices. If tg3_init_one() later fails, its common error path releases the mappings and netdev without undoing those PHYLIB resources. Disconnect the PHY and unregister the MDIO bus before the remaining teardown. Guard PHY cleanup with USE_PHYLIB to match tg3_phy_init(), and call tg3_mdio_fini() unconditionally to match tg3_mdio_init(). The existing IS_CONNECTED and MDIOBUS_INITED flags make both helpers safe when initialization only completed partially. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-98593 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: s390/debug: Fix NULL pointer dereference in debug_info_copy() When debug_register_static() fails, it clears areas, active_pages and active_entries but leaves the area bounds unchanged. Copying such an area, either by opening its view file or via debug_dump(), makes debug_info_copy() dereference the NULL pointers. Skip the copy loop when the source has no areas. | ||||
| CVE-2026-98592 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: net: spacemit: clear TX descriptor on fragment mapping failure emac_tx_mem_map() writes TX_DESC_0_OWN into the ring descriptor for every slot beyond old_head as soon as that slot's memset()'d local copy is committed with "*tx_desc_addr = tx_desc", i.e. before the buffers for that slot have necessarily all been mapped successfully. If emac_tx_map_frag() then fails on a later fragment, the err_free_skb path calls emac_free_tx_buf() to unmap and drop the skb, but leaves the already-written descriptor memory untouched, and tx_ring->head is never advanced past old_head (the "tx_ring->head = head" store is skipped by the goto). So a slot between old_head and the rolled-back head can be left with TX_DESC_0_OWN set and buffer_addr_{1,2} pointing at DMA mappings that emac_free_tx_buf() just tore down, while software considers that slot free again. The next successful emac_tx_mem_map() call only rebuilds old_head itself; if the DMA engine auto-advances into the following descriptor once it finishes old_head's packet, it will fetch that stale, already-unmapped address. emac_tx_clean_desc() already treats emac_free_tx_buf() and clearing the descriptor as a pair when reclaiming completed descriptors; do the same in the mapping failure path. | ||||
| CVE-2026-98591 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bounds check for skb-backed dynptrs The skb_pointer_if_linear() function checks whether a memory region of length len starting at offset off into the skb is in the linear area, and returns a pointer to the region if so. The check currently subtracts between skb_headlen and offset of the check, and since skb_headlen is unsigned the subtraction can underflow. This causes the bounds check to spuriously pass and generate an arbitrary pointer of the form *(skb->data + off). The only user of this helper is currently skb-backed BPF dynptr code. Returning the wrong pointer leads to the dynptr erroneously being backed with invalid memory. Ensure the subtraction cannot underflow, and fail the check if it would. Use u64 arithmetic to also prevent overflow when calculating (skb_headlen(skb) - off) since off is unsigned. | ||||
| CVE-2026-98590 | 1 Linux | 1 Linux Kernel | 2026-10-18 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix bpf_sock context code generation Currently, the ctx access code reads the rx_queue_mapping field with either a 4-byte or 2-byte load. The rest of the bits in the register are marked known zero by the verifier. However, the emitted ctx access code places in the register on certain the special value (-1) using BPF_MOV_IMM64, which gets sign-extended to turn on all the bits in the register. By shifting this value right, the program ends up with a value at runtime above what the verifier assumes is possible. Fix this by ensuring the read value is as wide as the assumed size. Use MOV32 instructions instead of MOV64 instructions to keep the upper bits zero as assumed by the verifier. Also properly report the size of the destination variable (the bpf_sock field, 4 bytes) instead of the source (the socket field, 2 bytes). | ||||