Export limit exceeded: 14962 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (14962 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-34988 | 1 Bytecodealliance | 1 Wasmtime | 2026-04-15 | 6.3 Medium |
| Wasmtime is a runtime for WebAssembly. From 28.0.0 to before 36.0.7, 42.0.2, and 43.0.1, Wasmtime's implementation of its pooling allocator contains a bug where in certain configurations the contents of linear memory can be leaked from one instance to the next. The implementation of resetting the virtual memory permissions for linear memory used the wrong predicate to determine if resetting was necessary, where the compilation process used a different predicate. This divergence meant that the pooling allocator incorrectly deduced at runtime that resetting virtual memory permissions was not necessary while compile-time determine that virtual memory could be relied upon. The pooling allocator must be in use, Config::memory_guard_size configuration option must be 0, Config::memory_reservation configuration must be less than 4GiB, and pooling allocator must be configured with max_memory_size the same as the memory_reservation value in order to exploit this vulnerability. If all of these conditions are applicable then when a linear memory is reused the VM permissions of the previous iteration are not reset. This means that the compiled code, which is assuming out-of-bounds loads will segfault, will not actually segfault and can read the previous contents of linear memory if it was previously mapped. This represents a data leakage vulnerability between guest WebAssembly instances which breaks WebAssembly's semantics and additionally breaks the sandbox that Wasmtime provides. Wasmtime is not vulnerable to this issue with its default settings, nor with the default settings of the pooling allocator, but embeddings are still allowed to configure these values to cause this vulnerability. This vulnerability is fixed in 36.0.7, 42.0.2, and 43.0.1. | ||||
| CVE-2025-26408 | 2026-04-15 | 6.1 Medium | ||
| The JTAG interface of Wattsense Bridge devices can be accessed with physical access to the PCB. After connecting to the interface, full access to the device is possible. This enables an attacker to extract information, modify and debug the device's firmware. All known versions are affected. | ||||
| CVE-2024-30253 | 2026-04-15 | 7.5 High | ||
| @solana/web3.js is the Solana JavaScript SDK. Using particular inputs with `@solana/web3.js` will result in memory exhaustion (OOM). If you have a server, client, mobile, or desktop product that accepts untrusted input for use with `@solana/web3.js`, your application/service may crash, resulting in a loss of availability. This vulnerability is fixed in 1.0.1, 1.10.2, 1.11.1, 1.12.1, 1.1.2, 1.13.1, 1.14.1, 1.15.1, 1.16.2, 1.17.1, 1.18.1, 1.19.1, 1.20.3, 1.21.1, 1.22.1, 1.23.1, 1.24.3, 1.25.1, 1.26.1, 1.27.1, 1.28.1, 1.2.8, 1.29.4, 1.30.3, 1.31.1, 1.3.1, 1.32.3, 1.33.1, 1.34.1, 1.35.2, 1.36.1, 1.37.3, 1.38.1, 1.39.2, 1.40.2, 1.41.11, 1.4.1, 1.42.1, 1.43.7, 1.44.4, 1.45.1, 1.46.1, 1.47.5, 1.48.1, 1.49.1, 1.50.2, 1.51.1, 1.5.1, 1.52.1, 1.53.1, 1.54.2, 1.55.1, 1.56.3, 1.57.1, 1.58.1, 1.59.2, 1.60.1, 1.61.2, 1.6.1, 1.62.2, 1.63.2, 1.64.1, 1.65.1, 1.66.6, 1.67.3, 1.68.2, 1.69.1, 1.70.4, 1.71.1, 1.72.1, 1.7.2, 1.73.5, 1.74.1, 1.75.1, 1.76.1, 1.77.4, 1.78.8, 1.79.1, 1.80.1, 1.81.1, 1.8.1, 1.82.1, 1.83.1, 1.84.1, 1.85.1, 1.86.1, 1.87.7, 1.88.1, 1.89.2, 1.90.2, 1.9.2, and 1.91.3. | ||||
| CVE-2023-31351 | 1 Amd | 4 Epyc, Epyc 7003, Epyc 8004 and 1 more | 2026-04-15 | 5.3 Medium |
| Improper restriction of operations in the IOMMU could allow a malicious hypervisor to access guest private memory resulting in loss of integrity. | ||||
| CVE-2024-8937 | 2026-04-15 | 6.5 Medium | ||
| CWE-119: Improper Restriction of Operations within the Bounds of a Memory Buffer vulnerability exists that could cause a potential arbitrary code execution after a successful Man-In-The Middle attack followed by sending a crafted Modbus function call to tamper with memory area involved in the authentication process. | ||||
| CVE-2025-7945 | 2026-04-15 | 8.8 High | ||
| A vulnerability was found in D-Link DIR-513 up to 20190831. It has been declared as critical. This vulnerability affects the function formSetWanDhcpplus of the file /goform/formSetWanDhcpplus. The manipulation of the argument curTime leads to buffer overflow. The attack can be initiated remotely. This vulnerability only affects products that are no longer supported by the maintainer. | ||||
| CVE-2025-6752 | 1 Linksys | 4 Ea7200, Ea7450, Ea7500 and 1 more | 2026-04-15 | 8.8 High |
| A vulnerability has been found in Linksys WRT1900ACS, EA7200, EA7450 and EA7500 up to 20250619 and classified as critical. This vulnerability affects the function SetDefaultConnectionService of the file /upnp/control/Layer3Forwarding of the component IGD. The manipulation of the argument NewDefaultConnectionService leads to stack-based buffer overflow. The attack can be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-26409 | 2026-04-15 | 6.8 Medium | ||
| A serial interface can be accessed with physical access to the PCB of Wattsense Bridge devices. After connecting to the interface, access to the bootloader is possible, as well as a Linux login prompt. The bootloader access can be used to gain a root shell on the device. This issue is fixed in recent firmware versions BSP >= 6.4.1. | ||||
| CVE-2024-36292 | 2026-04-15 | 7.3 High | ||
| Improper buffer restrictions for some Intel(R) Data Center GPU Flex Series for Windows driver before version 31.0.101.4314 may allow an authenticated user to potentially enable denial of service via local access. | ||||
| CVE-2021-1424 | 1 Cisco | 1 Asr 5000 Series Software | 2026-04-15 | 5.3 Medium |
| A vulnerability in the ipsecmgr process of Cisco ASR 5000 Series Software (StarOS) could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to insufficient validation of incoming Internet Key Exchange Version 2 (IKEv2) packets. An attacker could exploit this vulnerability by sending specifically malformed IKEv2 packets to an affected device. A successful exploit could allow the attacker to cause the ipsecmgr process to restart, which would disrupt ongoing IKE negotiations and result in a temporary DoS condition.Cisco has released software updates that address this vulnerability. There are no workarounds that address this vulnerability. | ||||
| CVE-2025-10948 | 1 Mikrotik | 1 Routeros | 2026-04-15 | 8.8 High |
| A vulnerability has been found in MikroTik RouterOS 7. This affects the function parse_json_element of the file /rest/ip/address/print of the component libjson.so. The manipulation leads to buffer overflow. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.20.1 and 7.21beta2 mitigates this issue. You should upgrade the affected component. The vendor replied: "Our bug tracker reports that your issue has been fixed. This means that we plan to release a RouterOS update with this fix. Make sure to upgrade to the next release when it comes out." | ||||
| CVE-2024-1174 | 1 Hp | 1 Thinpro | 2026-04-15 | 8.2 High |
| Previous versions of HP ThinPro (prior to HP ThinPro 8.0 SP 8) could potentially contain security vulnerabilities. HP has released HP ThinPro 8.0 SP 8, which includes updates to mitigate potential vulnerabilities. | ||||
| CVE-2025-3017 | 2026-04-15 | 5.3 Medium | ||
| A vulnerability, which was classified as critical, has been found in TA-Lib up to 0.6.4. This issue affects the function setInputBuffer of the file src/tools/ta_regtest/ta_test_func/test_minmax.c of the component ta_regtest. The manipulation leads to out-of-bounds write. It is possible to launch the attack on the local host. The exploit has been disclosed to the public and may be used. The identifier of the patch is 5879180e9070ec35d52948f2f57519713256a0f1. It is recommended to apply a patch to fix this issue. | ||||
| CVE-2025-55286 | 2026-04-15 | N/A | ||
| z2d is a pure Zig 2D graphics library. z2d v0.7.0 released with a new multi-sample anti-aliasing (MSAA) method, which uses a new buffering mechanism for storing coverage data. This differs from the standard alpha mask surface used for the previous super-sample anti-aliasing (SSAA) method. Under certain circumstances where the path being drawn existed in whole or partly outside of the rendering surface, incorrect bounding could cause out-of-bounds access within the coverage buffer. This affects the higher-level drawing operations, such as Context.fill, Context.stroke, painter.fill, and painter.stroke, when either the .default or .multisample_4x anti-aliasing modes were used. .supersample_4x was not affected, nor was drawing without anti-aliasing. In non-safe optimization modes (consumers compiling with ReleaseFast or ReleaseSmall), this could potentially lead to invalid memory accesses or corruption. z2d v0.7.1 fixes this issue, and it's recommended to upgrade to v0.7.1, or, given the small period of time v0.7.0 has been released, use v0.7.1 immediately, skipping v0.7.0. | ||||
| CVE-2025-6751 | 1 Linksys | 1 E8450 | 2026-04-15 | 8.8 High |
| A vulnerability, which was classified as critical, was found in Linksys E8450 up to 1.2.00.360516. This affects the function set_device_language of the file portal.cgi of the component HTTP POST Request Handler. The manipulation of the argument dut_language leads to buffer overflow. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2025-11010 | 1 Vstakhov | 1 Libucl | 2026-04-15 | 5.3 Medium |
| A vulnerability has been found in vstakhov libucl up to 0.9.2. Affected by this vulnerability is the function ucl_include_common of the file /src/ucl_util.c. Such manipulation leads to heap-based buffer overflow. Local access is required to approach this attack. The exploit has been disclosed to the public and may be used. | ||||
| CVE-2024-4162 | 2026-04-15 | 4.4 Medium | ||
| A buffer error in Panasonic KW Watcher versions 1.00 through 2.83 may allow attackers malicious read access to memory. | ||||
| CVE-2025-13566 | 1 Jarun | 1 Nnn | 2026-04-15 | 3.3 Low |
| A security vulnerability has been detected in jarun nnn up to 5.1. The impacted element is the function show_content_in_floating_window/run_cmd_as_plugin of the file nnn/src/nnn.c. The manipulation leads to double free. An attack has to be approached locally. The identifier of the patch is 2f07ccdf21e705377862e5f9dfa31e1694979ac7. It is suggested to install a patch to address this issue. | ||||
| CVE-2023-49618 | 2026-04-15 | 7.5 High | ||
| Improper buffer restrictions in some Intel(R) System Security Report and System Resources Defense firmware may allow a privileged user to potentially enable escalation of privilege via local access. | ||||
| CVE-2025-11015 | 1 Ogrecave | 1 Ogre | 2026-04-15 | 5.3 Medium |
| A weakness has been identified in OGRECave Ogre up to 14.4.1. Impacted is the function STBIImageCodec::encode of the file /ogre/PlugIns/STBICodec/src/OgreSTBICodec.cpp. This manipulation causes mismatched memory management routines. The attack is restricted to local execution. The exploit has been made available to the public and could be exploited. | ||||