Export limit exceeded: 399715 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (399715 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-97925 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tick/broadcast: Plug clockevents replacement race 朱恺乾 reported and decoded the following race condition when a broadcast device is replaced: CPUA CPUB __tick_broadcast_oneshot_control() bc = tick_broadcast_device.evtdev; tick_install_broadcast_device(dev) clockevents_exchange_device(cur, dev) shutdown(cur); detach(cur); cur->handler = noop; tick_broadcast_device.evtdev = dev; tick_broadcast_set_event(bc, next_event); <- FAIL: arms a detached device. If the original broadcast device has a restricted interrupt affinity mask and the last CPU in that mask goes offline then the BUG() in tick_cleanup_dead_cpu() triggers because the clockevent device is not in detached state. The reason for this is that tick_install_broadcast_device() is not serialized vs. tick broadcast operations. The obvious cure is to serialize tick_install_broadcast_device() with tick_broadcast_lock against a concurrent tick broadcast operation. That requires to split clockevents_exchange_device() into two parts, one which does the exchange, shutdown and detach operation and the other which drops the module reference count. This is required because the module reference cannot be dropped while holding tick_broadcast_lock. Let clockevents_exchange_device() do both operations as before, but let the broadcast device code take the two step approach and do the device exchange under tick_broadcast_lock and drop the module reference count after releasing it. | ||||
| CVE-2026-97930 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usbusx2y: fix in04_last array size mismatch with in04_buf The in04_last array in struct usx2ydev is declared as char[24], but in04_buf is allocated as sizeof(struct us428_ctls) which is 21 bytes. In i_usx2y_in04_int(), when ctl_snapshot_last == -2 (initialization path): memcpy(usx2y->in04_last, usx2y->in04_buf, sizeof(usx2y->in04_last)); This copies 24 bytes from a 21-byte slab allocation, reading 3 bytes past the end of the source object. Introduce a USX2Y_IN04_SIZE constant defined as sizeof(struct us428_ctls) and use it consistently for the in04_last array, the in04_buf allocation, the URB transfer length, and the comparison loop, replacing the bare 24 and 21 literals throughout. | ||||
| CVE-2026-97931 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: us122l: Prevent write upgrades for read mappings The hwdep mmap callback rejects read-buffer mappings that are initially writable, but leaves VM_MAYWRITE set on mappings created with PROT_READ. A process that can open the hwdep node O_RDWR can later use mprotect() to make the mapping writable. The read allocation begins with struct usb_stream. Its read_size member is used by the fault handler to decide which pages belong to the read buffer. The read VMA intentionally remains expandable because pcm_usb_stream uses mremap() after reading that size. Changing read_size first can therefore map and access pages beyond the allocation. The same member is also consumed by usb_stream_free(), where changing it can make free_pages_exact() release pages outside the allocation. Clear VM_MAYWRITE for read-buffer mappings after rejecting an initially writable VMA. This keeps the separate output-buffer mapping writable while preventing later permission upgrades. | ||||
| CVE-2026-97946 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: x86/amd_node: Fix PCI device reference counting in amd_smn_init() The local "root" pointer is a temporary variable used during the device search. Therefore, refcount related to the search iterators should be cleaned up after the search is complete. Use the __free() cleanup macro to ensure the refcount is decremented when the temporary pointer goes out of scope. Additionally, increment the refcount when caching a root pointer. This ensures the in-use refcount is separate from the temporary search refcounting. Finally, drop the redundant "root = NULL" before the second search loop. The pci_get_class() iterator always decrements the refcount of its "from" argument, so the first loop can only fall through with "root" already NULL. | ||||
| CVE-2026-97545 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: don't leak new_bp if xfs_btree_bload_drop_buf fails LOLLM observes that in xfs_btree_bload_prep_block, xfs_btree_bload_drop_buf can hit an IO error if writing the delwri buffer list to disk fails. In this case, we fail to release new_bp, which means we lose a locked buffer. Fix that. | ||||
| CVE-2026-97551 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: initialise args->total for parent pointer updates xfs_parent_da_args_init() builds an xfs_da_args from a zeroed xfs_parent_args (kmem_cache_zalloc), leaving args->total == 0. xfs_da_grow_inode_int() treats that field as a running block reservation and subtracts from it; because it is an xfs_extlen_t (uint32_t), the first attr-fork growth wraps it to ~0U. That defeats the free-space check in xfs_alloc_space_available(), and when it coincides with an AG that has exactly zero available blocks the allocation is clamped to maxlen 0 and returns -ENOSPC, which xfs_defer_finish_noroll() escalates to a filesystem shutdown. Set args->total the way the log recovery path does (xfs_attri_recover_work(), xfs_attr_item.c:706), in the add and replace paths that can grow the fork. Removals and lookups never grow it, so they leave the field alone, matching that switch. | ||||
| CVE-2026-97552 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: initialise error in xfs_defer_finish_one() xfs_defer_finish_one() declares error without an initialiser and only assigns it inside the loop over dfp->dfp_work. When that list is empty the loop body never runs, control falls through to the "Done with the dfp, free it" path, and the function returns an indeterminate value. An item-less pending item reaches this through xfs_defer_add_barrier(), which xfs_reap_ag_blocks() uses on any CONFIG_XFS_ONLINE_REPAIR kernel. xfs_defer_finish_noroll() treats any non-EAGAIN return as fatal, so a non-zero stack value turns a successful barrier into a SHUTDOWN_CORRUPT_INCORE in the middle of a repair. Zero is the correct result: reaching the free path means the item loop drained without a non-zero error. | ||||
| CVE-2026-97555 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix heap overflow in DACL owner/group rewrite When id_mode_to_cifs_acl rewrites an existing DACL, it allocates a buffer sized according to the on-disk DACL length reported by dacl_ptr->size. However, replace_sids_and_copy_aces may rewrite each ACE with a new owner/group SID obtained from the cifs.idmap upcall. Those SIDs can have up to SID_MAX_SUB_AUTHORITIES (15) sub-authorities, making each ACE up to 76 bytes (sizeof(struct smb_ace)). If the original DACL contains short SIDs (e.g., 1 sub-authority) while the replacement SIDs are long, the rewritten ACEs overflow the allocation. Fix this by always budgeting for worst-case SID expansion: allocate sizeof(struct smb_acl) plus num_aces * sizeof(struct smb_ace), which covers the smb_acl header and room for every ACE at maximum SID size. This replaces the previous split logic that used dacl_ptr->size for cifsacl mounts but num_aces * sizeof(struct smb_ace) for mode_from_sid mounts: both paths can trigger the same rewrite and need the same headroom. KASAN reports this as: BUG: KASAN: slab-out-of-bounds in build_sec_desc+0x1e8a/0x2680 [cifs] Write of size 4 at addr ffff8881a5e25374 by task chown/5298 ... The buggy address is located 0 bytes to the right of allocated 884-byte region [ffff8881a5e25000, ffff8881a5e25374) | ||||
| CVE-2026-97556 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: avoid leaking refcount when cifs_sb_tlink() fails cifs_oplock_break() takes over the reference that cifs_queue_oplock_break() acquired when it queued the work, and drops it with _cifsFileInfo_put() once the break has been processed. Only in setups with "-o multiuser", cifs_sb_tlink() may fail, at which point cifs_oplock_break() returns without putting the file reference, mirroring the reference leak we already fixed in the companion patch to cifs_queue_oplock_break(). This would trigger a crash due to busy inodes on the next unmount: BUG: Dentry ... still in use (1) [unmount of cifs cifs] VFS: Busy inodes after unmount of cifs (cifs) Drop the reference on that path as well. Doing so before the out label mirrors the normal path, which also puts the reference before cifs_done_oplock_break(). Found by Sashiko code review. The failure path was not exercised at runtime. | ||||
| CVE-2026-97560 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: smb: client: fix one-byte OOB read in smb2_parse_native_symlink() When parsing a share-root relative native symlink, memcpy copies smb_target+1 (skipping the leading separator) but uses strlen(smb_target)+1 as the length, reading one byte past the allocated buffer. This fixes the following KASAN splat when accessing an SMB symlink with a target of '\a\b': BUG: KASAN: slab-out-of-bounds in smb2_parse_native_symlink+0x4f5/0xca0 Read of size 5 at addr ffff88800878fe21 by task netfsfuzz-execu/1 CPU: 1 UID: 0 PID: 1 Comm: netfsfuzz-execu Tainted: G N 7.2.0-11943-g2709dd5ae32f-dirty #1 PREEMPT(lazy) Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996) Call Trace: <TASK> dump_stack_lvl+0x7b/0xa0 print_report+0xd0/0x630 kasan_report+0xe5/0x120 kasan_check_range+0x105/0x1b0 __asan_memcpy+0x23/0x60 smb2_parse_native_symlink+0x4f5/0xca0 parse_reparse_point+0x68a/0x1530 reparse_info_to_fattr+0x752/0xa20 cifs_get_fattr+0x873/0x15b0 cifs_get_inode_info+0xc0/0x310 cifs_lookup+0x308/0xa70 __lookup_slow+0x122/0x2b0 lookup_slow+0x50/0x70 path_lookupat+0x525/0xaf0 filename_lookup+0x1f2/0x550 vfs_statx+0xd1/0x1a0 vfs_fstatat+0x65/0xc0 __do_sys_newfstatat+0x9a/0x120 do_syscall_64+0xdd/0x4a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f | ||||
| CVE-2026-97566 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: pm: kernel: drop pending ADD_ADDR when removing ID0 The in-kernel MPTCP path manager can leave a stale ADD_ADDR announcement entry alive when removing the id 0 endpoint. This happens because the id 0 removal path does not tear down pending announcements, unlike the non-zero id path. When the PM later reselects id 0 after adding another signal endpoint, it finds the stale anno_list entry and hits WARN_ON_ONCE(mptcp_pm_is_kernel()) in mptcp_pm_announced_alloc(). Root cause: asymmetry between removal paths. - Non-zero id path: mptcp_nl_remove_subflow_and_signal_addr() calls mptcp_pm_remove_announced() to clean up. - Id 0 path: mptcp_nl_remove_id_zero_address() skips cleanup entirely. Fix by making the id 0 path symmetric: call mptcp_pm_announced_remove() and decrement add_addr_signaled before queuing the RM_ADDR. Subtle detail: signal endpoints are stored in anno_list with port 0, but msk_local carries the connection's local port. In other words, entries linked to ID0 paths should have port == 0. A follow-up patch will ensure that. mptcp_pm_announced_remove() uses use_port=true for comparison. So clear the port before the lookup. | ||||
| CVE-2026-97568 | 1 Linux | 1 Linux Kernel | 2026-09-25 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: syncookies: remember the request backup flag Instead of using an uninitialised bit when copying the info in subflow_ulp_clone(). To fix this, no need to extend the join_entry structure: backup is coming from struct mptcp_subflow_request_sock, only one bit. Do the same here by using one bit for both. | ||||
| CVE-2026-97571 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Propagate TPA buffer allocation failures in bnxt_queue_mem_alloc() bnxt_alloc_one_tpa_info_data() returns -ENOMEM as soon as one allocation fails. This leaves the remaining rxr->rx_tpa[] entries zeroed. bnxt_queue_mem_alloc() discards that return value, so the partially initialized ring is installed by bnxt_queue_start(). Since the agg_id is picked by the hardware and bnxt_alloc_agg_idx maps it to a SW index in rxr->rx_tpa[], it is possible that an uninitialized slot can be chosen which would hand a zero DMA address to the device. Fix this by checking the return value of bnxt_alloc_one_tpa_info_data and unwinding, freeing the ring buffers. | ||||
| CVE-2026-97948 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: powerpc/eeh: Fix recursive locking on devices without EEH sensitive driver The commit 1010b4c012b0 ("powerpc/eeh: Make EEH driver device hotplug safe") refactored the EEH code such that the pci_rescan_remove_lock is held at the beginning of eeh_handle_normal_event() and the eeh_reset_device() is called with that lock being held. Looks like the commit missed to remove the existing lock/unlock inside eeh_rmv_device() which is no longer necessary. This is causing the eehd to hang on the lock which it actually holds when that code path is taken. [<0>] 0xc00000011c78f870 [<0>] __switch_to+0xfc/0x1a0 [<0>] pci_lock_rescan_remove+0x30/0x44 [<0>] eeh_rmv_device+0x290/0x2e0 [<0>] eeh_pe_dev_traverse+0x80/0x130 [<0>] eeh_reset_device+0xcc/0x23c [<0>] eeh_handle_normal_event+0x830/0xa80 [<0>] eeh_event_handler+0xf8/0x190 [<0>] kthread+0x194/0x1b0 [<0>] start_kernel_thread+0x14/0x18 The issue is seen for cases where the errors are detected on the PHB directly AND|OR for devices where the driver error_detected() returns PCI_ERS_RESULT_NEED_RESET, and driver being not EEH sensitive(i.e no error handlers like slot_reset(), resume() etc defined). | ||||
| CVE-2026-97574 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bnxt_en: Don't free the live ring's TPA state on queue restart failure bnxt_queue_mem_alloc() shallow copies the live RX ring into the clone: memcpy(clone, rxr, sizeof(*rxr)); the code currently clears pointers that the clone owns (such as rx_agg_bmap), but rx_tpa and rx_tpa_idx_map are left pointing at memory of the live ring that was cloned. If an allocation failure happens later and the err_free_tpa_info label is taken, the live ring's memory can be freed while still in use. Fix this by initializing the clone's pointers to NULL to prevent live ring state from being freed inadvertently. | ||||
| CVE-2026-97576 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: v4l2-ctrls: validate HEVC tile counts The stateless HEVC decoders read num_tile_columns_minus1 + 1 entries from column_width_minus1[] and num_tile_rows_minus1 + 1 from row_height_minus1[] and use them as tile-loop bounds, but std_validate_compound() does not bound these u8 counts. Reject a V4L2_CTRL_TYPE_HEVC_PPS with tiling enabled whose tile counts exceed the uAPI array capacity, mirroring the existing compound-control range checks. | ||||
| CVE-2026-97578 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: verisilicon: rockchip: guard VPU981 AV1 divisor and tile buffer rockchip_vpu981_av1_dec_set_tile_info() divides context_update_tile_id by tile_info->tile_cols and writes one descriptor per tile into the tile_info DMA buffer, which holds AV1_MAX_TILES entries; tile_cols and tile_rows come from the bitstream. Guard the division against a zero tile_cols by initialising the context-update values to zero and computing them only when tile_cols is non-zero, and stop the descriptor writes once the tile_info buffer is full. The tile geometry written to the hardware registers is left unmodified; the per-dimension and total tile bounds are enforced by the control validation. | ||||
| CVE-2026-97579 | 1 Linux | 1 Linux Kernel | 2026-09-25 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: media: mediatek: vcodec: bound AV1 tile-start copy to the array capacity vdec_av1_slice_setup_tile() copies tile_cols + 1 / tile_rows + 1 entries into mi_col_starts[] / mi_row_starts[] from the bitstream tile_info. Bound the copy to the array capacity. | ||||
| CVE-2026-88264 | 2 Containers, Redhat | 5 Crun, Enterprise Linux, Hardened Images and 2 more | 2026-09-25 | 5.6 Medium |
| A flaw was found in crun. When the container configuration does not give /dev a dedicated mount, terminal setup can redirect /dev/console onto an attacker-controlled path, including via the read-only-rootfs bind-mount fallback. Affected versions are crun 1.29.1 and earlier. Default configurations that mount a fresh /dev are not exposed. No fixed release is available yet. | ||||
| CVE-2026-88839 | 2 Busybox, Redhat | 3 Busybox, Hardened Images, Hummingbird | 2026-09-25 | 6.7 Medium |
| BusyBox passwd/group tokenize() references a stale endpoint pointer after trimming, causing an out-of-bounds write of heap pointers. | ||||