Export limit exceeded: 384559 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (384559 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80568 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Input: synaptics-rmi4 - block s_input when F54 queue is busy Changing the input (diagnostic report type) mid-stream changes the report size. Since V4L2 buffers are allocated based on the size at stream start, changing the input while streaming could lead to a heap buffer overflow if the new size is larger than the allocated buffers. Prevent this by blocking VIDIOC_S_INPUT with -EBUSY if the V4L2 queue is busy (streaming). | ||||
| CVE-2026-80523 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: clk: spacemit: k3: set hdma clock as critical HDMA clock is responsible for the internal TCM access path of X100 RISC-V core, so set the clock flag as critical to prevent it from being shut off, otherwise the Linux system will hang, for example in the case of a vector instruction access generates a page fault. | ||||
| CVE-2026-80527 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: ceph: fix hanging __ceph_get_caps() with stale mds_wanted A reader can hang forever in __ceph_get_caps() when the client no longer holds `FILE_RD`, but local cap state still says that the capability is already wanted (via `mds_wanted`). One way to trigger this is through MDS cap revocation. If another client performs a conflicting operation, the MDS can revoke `FILE_RD` from the reader; the next read then has to reacquire `FILE_RD`. If the cap update that should request `FILE_RD` never reaches the MDS after `cap->mds_wanted` was raised, the reader is left holding only non-file caps while local `mds_wanted` still includes the file read caps. In that state, try_get_cap_refs() sees `need <= mds_wanted` and returns 0, so __ceph_get_caps() just waits on `i_cap_wq`. If the cap update that was supposed to request `FILE_RD never reaches the MDS after `cap->mds_wanted was` raised, no further request is sent and the waiter can sleep indefinitely until unrelated cap traffic happens to wake it up. The ordering issue is that `cap->mds_wanted` is updated in __prep_cap() before the `CEPH_MSG_CLIENT_CAPS message` is actually queued for send. That makes one field serve two different meanings at once: what this client wants, and what the client believes the MDS already knows it wants. A proper fix would be to split those states and track whether a cap update is actually in flight or has been observed by the MDS. However, simply moving the `cap->mds_wanted assignment` later would not be sufficient: queueing the message in the messenger does not guarantee that the MDS processed that specific wanted set, and reconnect or message loss can still invalidate that assumption. Fixing that properly would require a larger rework of the cap state machine. To allow simpler backports to stable kernels, this patch implements a simpler workaround: - stop waiting forever in __ceph_get_caps(); after a bounded wait, fall back to the renew path - make ceph_renew_caps() issue a synchronous `OPEN` request whenever the inode still does not actually hold the wanted caps, instead of only calling ceph_check_caps() The extra issued-vs-wanted check in ceph_renew_caps() is necessary because the previous test only checked whether the inode still had any real caps at all. That is not enough after revocation: the client can still hold something like `pLs` and yet be missing `FILE_RD` completely. In that case, falling back to ceph_check_caps() is not sufficient, because it still trusts `cap->mds_wanted` and may resend nothing. By requiring `(issued & wanted) == wanted` before taking the asynchronous path, the code only uses ceph_check_caps() when the `wanted caps` are already actually issued. Otherwise, it sends the synchronous `OPEN` renew. This preserves the existing asynchronous fast path when the wanted caps are already issued, avoids changing cap-state semantics, and fixes the hang by guaranteeing that a stalled waiter eventually retries through a path that does not rely on the stale `mds_wanted` state. [ idryomov: move CEPH_GET_CAPS_WAIT_TIMEOUT from libceph.h to mds_client.h, formatting ] | ||||
| CVE-2026-80580 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fbdev: bound mode sysfs output to the sysfs buffer mode_string() uses snprintf() which can return a value larger than the remaining buffer space. show_modes() accumulates the return value into i without checking whether i has reached PAGE_SIZE, causing the offset to advance past the sysfs buffer if the modelist is long enough. Add a size parameter to mode_string() and use scnprintf() to return only the bytes actually written. Add an early return when offset already exceeds the buffer. In show_modes(), stop accumulating once the buffer is full. | ||||
| CVE-2026-80584 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/qeth: validate user buffer length in SNMP and ARP query ioctls qeth_snmp_command() and qeth_l3_arp_query() allocate a buffer sized by a user-supplied length (udata_len) without checking a lower bound, then set udata_offset to a fixed non-zero value and pass both to a reply callback. The callback bounds-checks the copy with if ((udata_len - udata_offset) < len) Both fields are u32, so a udata_len smaller than udata_offset makes the subtraction wrap and the check pass, and the following memcpy() writes past the allocation. A udata_len of 0 also yields ZERO_SIZE_PTR from kzalloc(), which the existing NULL check does not catch. Reject buffers smaller than udata_offset before allocating, so the callback subtraction can no longer underflow. | ||||
| CVE-2025-3511 | 2026-08-27 | 7.5 High | ||
| Improper Validation of Specified Quantity in Input vulnerability in Mitsubishi Electric Corporation CC-Link IE TSN Remote I/O module, CC-Link IE TSN Analog-Digital Converter module, CC-Link IE TSN Digital-Analog Converter module, CC-Link IE TSN FPGA module, CC-Link IE TSN Remote Station Communication LSI CP620 with GbE-PHY, MELSEC iQ-R Series CC-Link IE TSN Master/Local Module, MELSEC iQ-R Series Ethernet Interface Module, CC-Link IE TSN Master/Local Station Communication LSI CP610, MELSEC iQ-F Series FX5 CC-Link IE TSN Master/Local Module, MELSEC iQ-F Series FX5 Ethernet Module, MELSEC iQ-F Series FX5-ENET/IP Ethernet Module, and MELSEC iQ-R Series CPU module allows a remote unauthenticated attacker to cause a Denial of Service condition in the products by sending specially crafted UDP packets. | ||||
| CVE-2026-80550 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Fix out of bounds check on CCW array The routine ccwchain_calc_length() counts the number of channel command words (CCWs) that are chained together in a single channel program, and rejects anything larger than CCWCHAIN_LEN_MAX (256) CCWs. The loop itself is "do..while (count < 257)", and while the logic in is_cpa_within_range() correctly adjusts between the 0-index array of CCWs and the count of CCWs starting at 1, this means it would look at a possible 257th CCW before ending the loop and (correctly) returning an error. Fix this by restructuring the loop to break as soon as 256 CCWs (thus indexes 0-255) are examined, without looking at memory outside the range. | ||||
| CVE-2026-80573 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: iforce - validate input packet lengths iforce_process_packet() reads fixed fields from joystick, wheel and status packets without first checking their lengths. In particular, the shared hats-and-buttons helper unconditionally reads data[6]. The status tail is a sequence of 16-bit effect addresses, but an incomplete final address is also consumed. A successful zero-length USB URB additionally reads the packet ID before the common parser is called. Reject the zero-length USB transfer, require the seven-byte joystick and wheel prefixes and the two-byte status prefix, and consume only complete status-tail addresses. | ||||
| CVE-2026-80538 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: propagate errors from xfs_rtginode_load xfs_rtginode_ensure() treats every xfs_rtginode_load() error other than -ENOENT as success. This can leave the realtime group inode unset after an I/O, allocation, or corruption error. Growfs then continues as though the inode had been loaded. Only -ENOENT means that the inode needs to be created. Return all other errors to the growfs caller. | ||||
| CVE-2026-80537 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix off-by-one in rtrefcount btree root level validation xfs_rtrefcountbt_compute_maxlevels() sets mp->m_rtrefc_maxlevels = min(d_maxlevels, r_maxlevels) + 1; where the trailing "+ 1" already accounts for the inode-root level, so the deepest valid on-disk root level is m_rtrefc_maxlevels - 1 and a cursor must satisfy bc_nlevels <= bc_maxlevels (= m_rtrefc_maxlevels). The two on-disk validation paths, xfs_rtrefcountbt_verify() and xfs_iformat_rtrefcount(), check the root level with ">" instead of ">=", so a crafted rtreflink (metadir + realtime + reflink) image whose /rtgroups/N.refcount inode has bb_level == m_rtrefc_maxlevels is accepted on mount. xfs_rtrefcountbt_init_cursor() then sets bc_nlevels = bb_level + 1, exceeding bc_maxlevels by one. Since the xfs_rtrefcountbt_cur slab object is sized for exactly bc_maxlevels entries, the first btree op on such a cursor indexes bc_levels[m_rtrefc_maxlevels] past the end of the object. This is reached by the first rtrefcount cursor built after mount, via log/CoW recovery (xfs_reflink_recover_cow() during xfs_mountfs()) or an FS_IOC_GETFSMAP over the realtime device. Reject a root level equal to m_rtrefc_maxlevels, matching the ">=" form already used by the sibling data-device refcount/rmap verifiers and the in-memory rtrmap verifier. BUG: KASAN: slab-out-of-bounds in xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) Write of size 2 at addr ffff888018391658 by task exploit/144 xfs_btree_lookup (fs/xfs/libxfs/xfs_btree.c:2101) xfs_btree_query_range (fs/xfs/libxfs/xfs_btree.c:5308) xfs_refcount_recover_cow_leftovers (fs/xfs/libxfs/xfs_refcount.c:2113) xfs_reflink_recover_cow (fs/xfs/xfs_reflink.c:1085) xlog_recover_finish (fs/xfs/xfs_log_recover.c:3551) xfs_mountfs (fs/xfs/xfs_mount.c:1158) xfs_fs_fill_super (fs/xfs/xfs_super.c:1940) get_tree_bdev_flags (fs/super.c:1634) vfs_get_tree (fs/super.c:1694) path_mount (fs/namespace.c:4161) __x64_sys_mount (fs/namespace.c:4367) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) The buggy address belongs to the cache xfs_rtrefcountbt_cur of size 216 The buggy address is located 8 bytes to the right of allocated 216-byte region [ffff888018391578, ffff888018391650) Kernel panic - not syncing: Fatal exception | ||||
| CVE-2026-80530 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix exchange-range reflink flag clearing issue with INO1_WRITTEN When exchanging two full-file ranges, xmi_can_exchange_reflink_flags() can move the reflink inode flag from the file that currently has it to the other file, as long as exactly one side is marked. This assumes that the file contents, and therefore all shared extents, are exchanged. That assumption is not true when XFS_EXCHMAPS_INO1_WRITTEN is set. xfs_exchmaps_can_skip_mapping() can skip hole and unwritten mappings from file1, so an exchange can complete without moving every mapping that the earlier flag-swap decision accounted for. In that case the post-operation cleanup can clear the reflink flag from an inode that still owns shared written extents. Later writes then take the non-reflink write path and may update blocks that should still have been protected by CoW, which shows up as data corruption between reflink-related files. Fix this by disabling the reflink flag exchange whenever XFS_EXCHMAPS_INO1_WRITTEN is requested. The contents exchange can still proceed; the conservative outcome is that both inodes keep the reflink flag. The regular reflink flag cleanup path can drop the extra flag later once the inode no longer has shared extents. | ||||
| CVE-2023-22289 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22328 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22343 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22352 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22364 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22420 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22423 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22426 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||
| CVE-2023-22430 | 2026-08-27 | N/A | ||
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority because it is Unused | ||||