Export limit exceeded: 377200 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 377200 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (377200 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68118 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: tcp: challenge ACK for non-exact RST in SYN-RECEIVED The SYN-RECEIVED request-socket path in tcp_check_req() accepts an in-window RST without requiring SEG.SEQ to exactly match RCV.NXT. A non-exact RST therefore removes the request instead of eliciting a challenge ACK. RFC 9293 section 3.10.7.4 applies the RFC 5961 reset check in SYN-RECEIVED: an exact RST resets the connection, while a non-exact in-window RST must trigger a challenge ACK and be dropped. Apply that check before the ACK-field validation, following the RFC sequence-number, RST, then ACK processing order. Factor the per-netns challenge ACK quota out of tcp_send_challenge_ack() so request sockets can share it. Use the request socket's send_ack() callback and its own out-of-window ACK timestamp to send and rate-limit the response. | ||||
| CVE-2026-68117 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | ||||
| CVE-2026-68116 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: vxlan: mdb: Fix source list corruption on a failed replace When replacing the source list of an MDB remote entry, all existing sources are first marked for deletion and vxlan_mdb_remote_srcs_add() is then called to add the new source list. Sources present in the new list have their deletion mark cleared, and any sources left marked afterwards are removed. If vxlan_mdb_remote_srcs_add() fails partway through, its error path deletes all entries on the remote's source list. That rollback is only correct for its other caller, vxlan_mdb_remote_add(), where the remote was just allocated and the list contains solely entries added during the call. On the replace path the list also holds pre-existing sources, so a failed replace tears them down together with their (S, G) forwarding entries instead of leaving the entry unchanged. This is reachable from an existing (*, G) remote. An EXCLUDE filter that loses sources starts forwarding traffic that should be blocked, while an INCLUDE filter that loses sources drops traffic that should be forwarded. Mark entries created during the current pass with a new VXLAN_SGRP_F_NEW flag. On failure, delete only those entries and clear the deletion mark on the pre-existing ones, so a failed replace leaves the source list untouched. Retain the flag until the whole operation succeeds and then clear it. Also stop vxlan_mdb_remote_src_add() from deleting a pre-existing entry it only looked up when adding that entry's forwarding entry fails. | ||||
| CVE-2026-68108 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vce: fix integer overflow in image size Fix a security vulnerability where malicious VCE command streams with oversized dimensions (e.g. 65536×65536) cause 32-bit integer overflow, wrapping the calculated buffer size to 0. This bypasses validation and allows GPU firmware to perform out-of-bound memory access. The fix uses 64-bit arithmetic to detect overflow and rejects invalid dimensions before they reach the hardware. V2: remove redundant check V3: modify max height value V4: remove size64 (cherry picked from commit cbe408dba581755ad1279a487ec786d8927d778d) | ||||
| CVE-2026-68107 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/vcn4: avoid rereading IB param length Reuse the parameter length returned by vcn_v4_0_enc_find_ib_param() instead of rereading it from the IB. This avoids a potential TOCTOU issue if the IB contents change between reads. (cherry picked from commit dbb02b4755f8c1f3773263f2d779872c1c0c073a) | ||||
| CVE-2026-68106 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: fix division by zero with invalid uvd dimensions When width or height is less than 16, width_in_mb or height_in_mb becomes 0, leading to fs_in_mb being 0. This causes a division by zero when calculating num_dpb_buffer in H264 and H264 Perf decode paths. Add validation to reject frames with width < 16 or height < 16 before performing any calculations that depend on these values. V2: Format change - move up all vaiable definitions. V3: Use warn_once to avoid spam. (cherry picked from commit 3e41d26c70b0a459d041cc19482a226c4b7423cb) | ||||
| CVE-2026-68104 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) | ||||
| CVE-2026-68103 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: reject mapping a reserved doorbell to a new queue When creating an user-queue, the user space provides a doorbell BO handle and an offset within the bo to obtain a doorbell. However current implementation using xa_store_irq() to store a doorbell, which allows a later queue created with the same BO and offset parameters to overwrite an existing queue and doorbell mapping. This can cause problems like misrouting fence IRQ processing to a wrong queue, and mislead the cleanup process of one queue erasing the mapping of another queue. This commit fixes this issue by replacing xa_store_irq with xa_insert_irq, which rejects mapping a reserved doorbell to a newly created queue (cherry picked from commit 6244eae22966350db52faf9c1369d3b2ffc5de4e) | ||||
| CVE-2026-68100 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate num_subauth when copying ACE in set_ntacl_dacl set_ntacl_dacl() copies each ACE from the attacker-controlled stored security descriptor verbatim into the response DACL without checking sid.num_subauth. The ACE bytes (including an unchecked num_subauth) originate from an authenticated SMB2_SET_INFO(SecInfo=DACL) that is stored raw via ksmbd_vfs_set_sd_xattr(); parse_dacl() rejects a bad ACE with `break` rather than an error, so parse_sec_desc() still returns success and the malformed SD reaches the xattr intact. On a subsequent SMB2_QUERY_INFO(SecInfo=DACL) for an inode carrying a POSIX access ACL, build_sec_desc() -> set_ntacl_dacl() -> set_posix_acl_entries_dacl() walks the copied ACEs and reads ntace->sid.sub_auth[ntace->sid.num_subauth - 1] with num_subauth taken straight from the stored SD. Since sub_auth[] is fixed at SID_MAX_SUB_AUTHORITIES (15), a crafted num_subauth (e.g. 255) drives an out-of-bounds heap read of ~1 KB with an offset fully controlled by an authenticated client. The sibling functions already gate this field: parse_dacl() -- num_subauth == 0 || > SID_MAX_SUB_AUTHORITIES parse_sid() -- num_subauth > SID_MAX_SUB_AUTHORITIES smb_copy_sid() -- min_t(u8, num_subauth, SID_MAX_SUB_AUTHORITIES) set_ntacl_dacl() is the lone inconsistent path that omits the check. Add the same num_subauth validation in set_ntacl_dacl() before copying the ACE, matching the gate already enforced by parse_dacl(). | ||||
| CVE-2026-68098 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: bound DACL dedup walk to copied ACEs set_ntacl_dacl() can stop copying ACEs before consuming the full input DACL when size accounting overflows. When that happens, num_aces reflects only the ACEs that were actually copied into the output DACL, but set_posix_acl_entries_dacl() still receives nt_num_aces and uses it to walk the existing ACE array during dedup. That makes the dedup walk scan past the copied ACE array and inspect buffer tail that does not contain valid ACEs. Split the two meanings currently carried by the NT ACE count. Pass the number of copied NT ACEs to bound the dedup walk, and preserve the original "input DACL had NT ACEs" state separately for the Everyone/default ACL fallback. This keeps the dedup walk aligned with the ACEs that are actually present in the rebuilt DACL. | ||||
| CVE-2026-68097 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: validate ACE size against SID sub-authorities set_ntacl_dacl() validates sid.num_subauth before copying an ACE, but does not verify that the declared ACE size contains all sub-authorities described by that field. An undersized ACE can therefore be copied and later make the POSIX ACL deduplication walk inspect data beyond the copied ACE boundary. The existing initial bound check is also too small. It only ensures that the ACE size field is accessible before set_ntacl_dacl() reads sid.num_subauth farther into the input buffer. Require enough input for the fixed SID header before accessing num_subauth, reject ACEs smaller than that header, and skip ACEs whose declared size cannot contain the complete SID. This makes the validation consistent with the other ACE walk paths. | ||||
| CVE-2026-68096 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: audit: fix recursive locking deadlock in audit_dupe_exe() A deadlock occurs in the audit subsystem when duplicating executable-related rules. When a file is moved (e.g., via do_renameat2()), the VFS layer locks the parent directory (I_MUTEX_PARENT), which synchronously triggers an fsnotify_move event. If an existing executable audit rule matches the file being moved, the audit subsystem catches this event and calls audit_dupe_exe() to duplicate the watch and update the rule. Then, audit_alloc_mark() would call kern_path_parent() to resolve the path, leading to a blind attempt to acquire the exact same I_MUTEX_PARENT lock already held by the task, resulting in the following recursive locking deadlock: ============================================ WARNING: possible recursive locking detected 6.12.0-55.27.1.el10_0.x86_64+debug #1 Not tainted -------------------------------------------- mv/5099 is trying to acquire lock: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: __kern_path_locked+0x10a/0x2f0 but task is already holding lock: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1){+.+.}-{3:3}, at: lock_two_directories+0x13f/0x2b0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&inode->i_sb->s_type->i_mutex_dir_key/1); lock(&inode->i_sb->s_type->i_mutex_dir_key/1); *** DEADLOCK *** May be due to missing lock nesting notation 6 locks held by mv/5099: #0: ffff888112a9c440 (sb_writers#13) at: do_renameat2+0x34c/0xbc0 #1: ffff888112a9c790 (&type->s_vfs_rename_key#3) at: do_renameat2+0x415/0xbc0 #2: ffff888132846b58 (&inode->i_sb->s_type->i_mutex_dir_key/1) at: lock_two_directories+0x13f/0x2b0 #3: ffff888132845358 (&inode->i_sb->s_type->i_mutex_dir_key/5) at: lock_two_directories+0x175/0x2b0 #4: ffffffffb3a1fb10 (&fsnotify_mark_srcu) at: fsnotify+0x454/0x28a0 #5: ffffffffaf886230 (audit_filter_mutex) at: audit_update_watch+0x36/0x11e0 stack backtrace: Call Trace: <TASK> dump_stack_lvl+0x6f/0xb0 print_deadlock_bug.cold+0xbd/0xca validate_chain+0x83a/0xf00 __lock_acquire+0xcac/0x1d20 lock_acquire.part.0+0x11b/0x360 down_write_nested+0x9f/0x230 __kern_path_locked+0x10a/0x2f0 kern_path_locked+0x26/0x40 audit_alloc_mark+0xfb/0x4f0 audit_dupe_exe+0x6c/0xe0 audit_dupe_rule+0x6c2/0xc00 audit_update_watch+0x4cc/0x11e0 audit_watch_handle_event+0x12c/0x1b0 send_to_group+0x5d0/0x8b0 fsnotify+0x615/0x28a0 fsnotify_move+0x1d8/0x630 vfs_rename+0xdcd/0x1df0 do_renameat2+0x9d4/0xbc0 __x64_sys_renameat+0x192/0x260 do_syscall_64+0x92/0x180 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0033:0x7f0491fe8c4e Code: 0f 1f 40 00 48 8b 15 c1 e1 16 00 f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 f3 0f 1e fa 49 89 ca b8 08 01 00 00 0f 05 <48> 3d 00 f0 ff ff 77 0a c3 66 0f 1f 84 00 00 00 00 00 48 8b 15 89 RSP: 002b:00007ffc7210bf38 EFLAGS: 00000246 ORIG_RAX: 0000000000000108 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0491fe8c4e RDX: 0000000000000003 RSI: 00007ffc7210e6c8 RDI: 00000000ffffff9c RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000001 R10: 00005575eb2dae2a R11: 0000000000000246 R12: 00005575eb2dae2a R13: 00007ffc7210e6c8 R14: 0000000000000003 R15: 00000000ffffff9c </TASK> The aforementioned deadlock can be consistently reproduced by running the script below: audit-dupe-exe-deadlock.sh -------------------------- #!/bin/bash auditctl -D mkdir -p /tmp/foo touch /tmp/file auditctl -a always,exit -F exe=/tmp/file -F path=/tmp/file -S all -k dr mv /tmp/file /tmp/foo/file rm -Rf /tmp/foo This patch fixes the issue by introducing struct audit_watch_ctx to pass the fsnotify event context down to audit_alloc_mark(). By utilizing the already-resolved directory inode provided by the event, we bypass the kern_path_parent() path resol ---truncated--- | ||||
| CVE-2026-68091 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: HID: wacom: stop hardware after post-start probe failures wacom_parse_and_register() starts HID hardware before registering inputs and initializing pad LEDs/remotes. Those later steps can fail, but their error paths currently release Wacom resources without stopping the HID hardware. Route post-hid_hw_start() failures through hid_hw_stop() before releasing driver resources. This issue was identified during our ongoing static-analysis research while reviewing kernel code. | ||||
| CVE-2026-68085 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_uart: clear HCI_UART_SENDING when write_work is canceled HCI_UART_SENDING bit in tx_state means write_work is pending and blocks queueing it again. Currently this bit is not cleared when canceling the work in hci_uart_close(), which blocks future writes when device is reopened later if write_work was pending. Fix by clearing HCI_UART_SENDING when canceling the work. Also make clearing of tx_skb safe by using disable_work_sync + enable_work instead of just cancel_work_sync. hci_uart_flush() purges the proto tx queue so we can cancel the pending write_work there, instead of doing it just in hci_uart_close(). Re-enable and possibly requeue the work after queue flush. | ||||
| CVE-2026-68083 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.1 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix path resolution in ksmbd_vfs_kern_path_create The SMB2 open lookup is rooted at the share with LOOKUP_BENEATH, but the create/mkdir/hardlink sink is not: ksmbd_vfs_kern_path_create() builds an absolute path with convert_to_unix_name() and resolves it from AT_FDCWD via start_creating_path(), so a ".." component is walked from the real filesystem root and escapes the export. An authenticated client races a missing path component so the rooted open lookup returns -ENOENT (taking the create branch) while the same component is present (a directory) when the create walk runs; the create then resolves ".." out of the share. Root the create walk at the share like the lookup and rename paths already are: resolve the parent with vfs_path_parent_lookup(..., LOOKUP_BENEATH, &share_conf->vfs_path) and create the final component with start_creating_noperm(). convert_to_unix_name() then has no callers and is removed. | ||||
| CVE-2026-68082 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: libceph: fix two unsafe bare decodes in decode_lockers() decode_lockers() in cls_lock_client.c contains two bare decode operations that allow a malicious or compromised OSD to trigger slab-out-of-bounds reads: 1. ceph_decode_32(p) at the num_lockers field has no preceding bounds check. ceph_start_decoding() accepts struct_len=0 as valid -- the internal ceph_decode_need(p, end, 0, bad) always passes -- so when an OSD sends struct_len=0, ceph_start_decoding() returns success with p == end. The immediately following bare ceph_decode_32(p) then reads 4 bytes past the validated buffer boundary. The garbage value is passed directly to kzalloc_objs() as the locker count. The sibling function decode_watchers() in osd_client.c already uses ceph_decode_32_safe() after its own ceph_start_decoding() call. decode_lockers() was the only site using the bare variant. 2. ceph_decode_8(p) after the decode_locker() loop has no preceding bounds check. If an OSD crafts num_lockers such that the loop advances p exactly to end, the subsequent bare ceph_decode_8(p) reads one byte past the validated buffer boundary. The result is passed directly into *type, which is used as a lock type discriminator by callers, giving an OSD-controlled one-byte OOB read with direct influence over the lock type field. Fix both by replacing bare operations with their safe variants: ceph_decode_32(p) -> ceph_decode_32_safe(p, end, *num_lockers, err_inval) ceph_decode_8(p) -> ceph_decode_8_safe(p, end, *type, err_free_lockers) The goto targets differ intentionally: err_inval: is a new label returning -EINVAL directly. It is used for the pre-allocation failure path where *lockers is not yet allocated and must not be passed to ceph_free_lockers(). err_free_lockers: is the existing label. It is used for the post-allocation failure path where *lockers is allocated and must be freed. ret is set to -EINVAL before ceph_decode_8_safe() so that err_free_lockers returns the correct error code on bounds violation. Without this, err_free_lockers would return a stale ret value (0 from the successful decode_locker() loop), silently swallowing the error. -EINVAL is correct for both failure paths. The data received from the OSD is structurally malformed. -ENOMEM would misrepresent the failure class to callers and to stable@ backporters triaging error paths. Attacker model: a malicious or compromised OSD in a multi-tenant Ceph deployment can trigger this against any kernel client that issues the lock.get_info class method (e.g. during RBD exclusive lock acquisition). [ idryomov: trim changelog, formatting ] | ||||
| CVE-2026-19756 | 1 Dromara | 1 Lamp-cloud | 2026-08-13 | 6.3 Medium |
| A vulnerability has been found in Dromara lamp-cloud up to 5.10.0. This affects an unknown part of the file DefGenProjectController.java of the component Code Generator. Such manipulation of the argument outputDir/parent/projectPrefix leads to path traversal. It is possible to launch the attack remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. | ||||
| CVE-2026-21035 | 2 Samsung, Samsung Mobile | 2 Plus Tv, Samsung Plus Tv | 2026-08-13 | 7.5 High |
| Improper input validation in Samsung Plus TV prior to version 1.0.28.6 allows remote attackers to access sensitive information. | ||||
| CVE-2026-21038 | 2 Samsung, Samsung Mobile | 2 Android Usb Driver, Android Usb Driver For Windows | 2026-08-13 | 5.5 Medium |
| Improper input validation in Samsung Android USB Driver for Windows prior to version 1.9.5.0 allows local attacker to access out-of-bounds memory. | ||||
| CVE-2026-46283 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: tpm: Use kfree_sensitive() to free auth session in tpm_dev_release() tpm_dev_release() uses plain kfree() to free chip->auth, which contains sensitive cryptographic material including HMAC session keys, nonces, and passphrase data (struct tpm2_auth). Every other code path that frees this structure uses kfree_sensitive() to zero the memory before releasing it: both tpm2_end_auth_session() and tpm_buf_check_hmac_response() do so. The tpm_dev_release() path is the only one that does not, leaving key material in freed slab memory until it is eventually overwritten. Use kfree_sensitive() for consistency with the rest of the driver and to ensure session keys are scrubbed during device teardown. | ||||