Export limit exceeded: 402086 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (402086 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-98256 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: signal: Prevent exec() race Hyunwoo debugged the following KASAN UAF splat: BUG: KASAN: slab-use-after-free in __send_signal_locked+0xb27/0xba0 Write of size 8 at addr ffff888007ed80c8 by task poc/79 ... Call Trace: __send_signal_locked+0xb27/0xba0 do_send_sig_info+0xa7/0x160 do_send_specific+0x76/0xa0 __x64_sys_tgkill+0x193/0x270 ... Allocated by task 80: do_timer_create+0x1a4/0x1030 __x64_sys_timer_create+0x145/0x190 ... Freed by task 12: kmem_cache_free_bulk+0x1f8/0x4a0 kvfree_rcu_bulk+0x14f/0x1c0 kfree_rcu_work+0x128/0x1a0 ... Last potentially related work creation: kvfree_call_rcu+0x39/0x390 __flush_itimer_signals+0x211/0x320 flush_itimer_signals+0x47/0x90 begin_new_exec+0xa6b/0x28c0 It turned out that this happens with a non-leader exec() as Hyunwoo explained: de_thread() calls exchange_tids() before release_task(leader), so the struct pid held by a SIGEV_THREAD_ID timer created against the leader's tid now points to the thread which called execve(). pid_task() returns that thread and lock_task_sighand() on it succeeds. If the timer signal is blocked, its sigqueue stays queued on the leader's task::pending. The next expiry of that timer can then run while release_task() flushes the queue. posixtimer_send_sigqueue() checks whether the sigqueue is already queued with a plain list_empty(), which only reads list_head::next. list_del_init() is not atomic and INIT_LIST_HEAD() stores list_head::next before list_head::prev, so the check can pass in between. list_add_tail() queues the entry on the task::pending of the live thread, and the list_head::prev store from the flush then overwrites the list_head::prev link that list_add_tail() has just set. __flush_itimer_signals() does not undo that either. With list_head::prev pointing at the entry itself, its list_del_init() only stores the same values again, so the entry is not removed from the list. It is still there after the last reference is dropped and the timer is freed by RCU, and the list_add_tail() of a later tgkill() follows that list_head::prev into the freed timer. This problem surfaced with the recent commit which moved the sigqueue flush out of the sighand lock held region. Hyonwoo proposed to fix this by using list_del_init_careful(), but that just papers over the problem. After some disucssions and various attempts to solve it, Eric pointed out that there is no reason to flush task::pending late in release_task() and it should be done in exit_signals() already. As nothing can collect and deliver signals which are queued in a dying task's pending queue, there is no reason to delay it further. But it has to be ensured that no signals can be queued into it after that point. exit_signals() sets PF_EXITING in task::flags, which can be used as an indicator for this. Cure it by: - Preventing signal queueing for task private signals (PIDTYPE_PID) when the task has PF_EXITING set in __send_signal_locked() and in posixtimer_send_sigqueue(). - Protecting the unlocked setting of PF_EXITING in exit_signals() for the task group empty and the group exit case with sighand lock - Flushing task::pending signals right there. Optimize that by moving the whole pending list to an on-stack list head under sighand lock and free the signals without the lock held. There has been quite some discussion about the lockless flush and the non-leader exec case on weakly ordered systems. The problem is that a third party which tries to send a posix timer signal relies on the PID lookup to find the target task and that lookup might result in the new leader when the signal was originaly directed to the old leader. In case that the signal was queued on the old leader then the lockless flush raised a concern over the following situation: old_leader new_leader third party A: flush_list() // list_del_in ---truncated--- | ||||
| CVE-2026-98293 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: ISO: Fix parent socket leak in iso_conn_ready() iso_get_sock() returns the parent socket with a reference held, which is dropped by sock_put() once the child socket has been set up. The error path taken when iso_sock_alloc() fails only calls release_sock() and returns, leaking the reference and thus the parent socket itself. Drop the reference on that path as well. | ||||
| CVE-2026-98300 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: tcp: Don't call skb_clone_and_charge_r() for close()d listener in tcp_v6_do_rcv(). tcp_v6_do_rcv() no longer calls skb_clone_and_charge_r() for TCP_LISTEN since commit 073d89808c06 ("net: fix data-races around sk->sk_forward_alloc"). However, there is still a small race window between tcp_v6_rcv() and tcp_v6_do_rcv(), where concurrent close() changes TCP_LISTEN to TCP_CLOSE, causing skb_clone_and_charge_r() to be called locklessly and resulting in the splat below. [0] Let's avoid calling skb_clone_and_charge_r() for TCP_CLOSE as well. This is fine for non-listeners because tcp_rcv_state_process() drops skb for TCP_CLOSE and opt_skb was freed immediately anyway. [0]: sk->sk_forward_alloc WARNING: net/ipv4/af_inet.c:162 at inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162, CPU#1: ksoftirqd/1/28 Modules linked in: CPU: 1 UID: 0 PID: 28 Comm: ksoftirqd/1 Not tainted 7.2.0 #17 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.17.0-debian-1.17.0-1 04/01/2014 RIP: 0010:inet_sock_destruct+0x64d/0x810 net/ipv4/af_inet.c:162 Code: 3d 49 ff e9 06 fd ff ff e8 d0 5b 83 f8 90 0f 0b 90 e9 35 fe ff ff e8 c2 5b 83 f8 90 0f 0b 90 e9 c5 fe ff ff e8 b4 5b 83 f8 90 <0f> 0b 90 e9 04 ff ff ff e8 a6 5b 83 f8 90 0f 0b 90 e9 65 fe ff ff RSP: 0018:ffffc90000677bb8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8880117bde80 RCX: ffffffff8957eb41 RDX: ffff88801dad5d00 RSI: ffffffff8957ec3c RDI: 0000000000000005 RBP: 00000000fffff000 R08: ffffffff8957eb41 R09: 00000000fffff000 R10: 0000000000000005 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880117bdf10 R14: ffffffff81c08eb7 R15: 0000000000000003 FS: 0000000000000000(0000) GS:ffff8880d7ae5000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93a1021138 CR3: 00000000207a9000 CR4: 0000000000350ef0 Call Trace: <TASK> __sk_destruct+0x82/0xae0 net/core/sock.c:2356 rcu_do_batch kernel/rcu/tree.c:2645 [inline] rcu_core+0x59c/0x1100 kernel/rcu/tree.c:2897 handle_softirqs+0x1e4/0x9b0 kernel/softirq.c:622 run_ksoftirqd kernel/softirq.c:1076 [inline] run_ksoftirqd+0x38/0x60 kernel/softirq.c:1068 smpboot_thread_fn+0x458/0xc80 kernel/smpboot.c:160 kthread+0x396/0x4a0 kernel/kthread.c:436 ret_from_fork+0x8e0/0xe40 arch/x86/kernel/process.c:158 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245 </TASK> | ||||
| CVE-2026-98319 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm: Fix drm_pending_vblank_event leak in error path for out_fence_ptr When an out_fence_ptr is provided but DRM_MODE_PAGE_FLIP_EVENT is not set, a drm_pending_vblank_event will be allocated. If later, there is an allocation failure or another failure at setup_out_fence(), that event will not have base.fence set and it will not be released at complete_signaling(). Release the event and set crtc_state->event to NULL just like in the DRM_MODE_PAGE_FLIP_EVENT case when there is a failure at drm_event_reserve_init(). That is, prepare_signaling() releases the event and there is nothing to be done at complete_signaling(). Use drm_event_cancel_free() as that will also undo drm_event_reserve_init() in case it has been called. | ||||
| CVE-2026-98322 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: nft_nat: fully initialise new_addr in netmap setup nft_nat_setup_netmap() builds the mapped address in an on-stack union nf_inet_addr. For an IPv4 mapping it writes only the 4-byte .ip member and the loop runs a single 32-bit iteration, but it then copies the whole 16-byte union into range->min_addr and range->max_addr, so the upper 12 bytes reach nf_nat_setup_info() uninitialised. KMSAN reports an uninit-value in nf_nat_setup_info() reached from nft_nat_eval(). The IPv6 path fills all 16 bytes and is not affected. Zero-initialise new_addr. | ||||
| CVE-2026-98329 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: don't allow injecting frames wider than the chanctx Frames injected on a monitor interface can carry a radiotap field requesting a bandwidth, which mac80211 passes down to the driver regardless of the the actual operational bandwidth. If the bandwidth requested is too wide, that triggers a warning in hwsim: WARN_ON(hwsim_get_chanwidth(bw) > hwsim_get_chanwidth(confbw)) Drop such frames entirely instead since they cannot be sent. | ||||
| CVE-2026-98335 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: wifi: mac80211: abort chanswitch when leaving a mesh The code in ieee80211_stop_mesh() leaves CSA active, but leaving the mesh released the channel context, so the CSA finalize work crashes: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000003 KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f] RIP: 0010:ieee80211_put_srates_elem+0x42/0x640 net/mac80211/util.c:3272 Call Trace: ieee80211_mesh_build_beacon+0xa83/0x1b50 net/mac80211/mesh.c:1093 ieee80211_mesh_rebuild_beacon+0xc7/0x170 net/mac80211/mesh.c:1147 ieee80211_mesh_finish_csa+0x131/0x210 net/mac80211/mesh.c:1542 ieee80211_set_after_csa_beacon net/mac80211/cfg.c:4085 [inline] __ieee80211_csa_finalize net/mac80211/cfg.c:4133 [inline] ieee80211_csa_finalize+0x633/0x1150 net/mac80211/cfg.c:4155 cfg80211_wiphy_work+0x2ab/0x450 net/wireless/core.c:438 Abort the channel switch properly. | ||||
| CVE-2026-98342 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: wait for RCU readers before releasing dma_device dma_issue_pending_all() walks the dma_device_list with list_for_each_entry_rcu() under rcu_read_lock(). dma_device_release() unlinks the device with list_del_rcu() and then calls device->device_release() (which in many drivers, such as plx_dma.c, directly calls kfree()). Because there is no grace period between unlinking the device and freeing it, concurrent RCU readers in dma_issue_pending_all() can access the device after it has been freed. The lockless walk originally relied on clients holding a dmaengine reference to pin the provider module, and therefore the device, for as long as they might traverse the list. Commit 8ad342a86359 ("dmaengine: Add reference counting to dma_device struct") decoupled the dma_device lifetime from the module reference, so the device can now be released while a reader is still walking the list. Add synchronize_rcu() before the device is freed, so RCU readers are guaranteed to have finished. Keep it unconditional: providers that do not implement device_release() free the device themselves once dma_async_device_unregister() returns. This call will delay for a grace period with dma_list_mutex held, which is safe and only teardown path is delayed. | ||||
| CVE-2026-98352 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/rtrs-clt: Fix CQ pool leak when connect is interrupted The client borrows shared CQ credits in the ADDR_RESOLVED handler via ib_cq_pool_get(), before the peer is connected. create_cm() can return -ERESTARTSYS from wait_event_interruptible_timeout() without destroying the CM ID. The init_conns() and stop-and-destroy paths then call destroy_con_cq_qp() while cq is still NULL (no PUT) and only afterwards rdma_destroy_id(). CMA serializes the handler against rdma_destroy_id() with handler_mutex, but that does not order the GET against destroy_con_cq_qp(). If ADDR_RESOLVED has already passed the DESTROYING check, it can take con_mutex, GET credits, and then lose the con to kfree. Device unregister later hits WARN_ON(cq->cqe_used) in ib_cq_pool_cleanup(). Set a per-connection flag under con_mutex before CQ/QP teardown so a racing ADDR_RESOLVED cannot borrow credits after teardown has begun. | ||||
| CVE-2026-98353 | 1 Linux | 1 Linux Kernel | 2026-10-06 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: RDMA/erdma: Use IRQ-safe XArray helpers for QP and CQ tables Locked QP and CQ lookups from EQ interrupts can deadlock with create-path XArray updates. If an interrupt arrives while the create path holds the plain xa_lock, the lookup spins forever trying to acquire the same lock. Use IRQ-safe XArray helpers for all QP and CQ create-path updates, including the GSI QP store and error paths. Initialize both arrays with XA_FLAGS_LOCK_IRQ so sleeping allocations preserve interrupt state. | ||||
| CVE-2026-105797 | 2026-10-06 | 8.8 High | ||
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. In versions 0.261.003 and 0.261.027, an authorization ordering flaw in POST /api/user/plugins allows an authenticated low-privileged user to omit the top-level MCP type so that _reject_non_admin_mcp_stdio skips inspection before the type is restored from metadata. The stored personal action can then reach McpPluginFactory.create_connector, and MCPStdioPlugin.connect starts the attacker-selected operating-system process under the application service identity when the action tool is invoked. Exploitation requires personal plugins to be enabled and governance to permit MCP actions, and it can expose or modify secrets and data available to the service or disrupt the service. This issue is fixed in version 0.261.031. | ||||
| CVE-2026-105796 | 2026-10-06 | 8.8 High | ||
| Kiota is an OpenAPI based HTTP Client code generator. From 0.5.0 until 1.35.0, Kiota's Java and PHP documentation-comment sanitizers delete block-comment terminators rather than neutralizing them, allowing overlapping characters to reform a terminator and place attacker-controlled OpenAPI text outside a generated documentation comment. The Java sanitizer also removes non-ASCII characters after deleting terminators, which can create a new terminator during normalization. Exploitation requires a developer or build pipeline to generate source from the malicious description and then compile and load the Java output or load the PHP output, after which injected code executes in the consuming application or build environment context. The version range is based on the Java defect and does not assert that PHP generation existed in every affected release. This issue is fixed in version 1.35.0. | ||||
| CVE-2026-105795 | 2026-10-06 | 3.1 Low | ||
| Kiota is an OpenAPI based HTTP Client code generator. From 1.25.1 until 1.35.0, Kiota copies x-ai-capabilities.response_semantics.oauth_card_path from an attacker-controlled or compromised OpenAPI description into a generated API plugin manifest without validating that the value is a safe package-relative file reference. Parent-directory traversal, rooted paths, or absolute URIs can therefore reach a consuming host that resolves the reference, allowing the host to cross the intended plugin-package boundary or use an unintended authentication card. Kiota does not itself read a local file or execute code merely while generating the manifest, and impact requires downstream resolution of the unsafe reference. This issue is fixed in version 1.35.0. | ||||
| CVE-2021-21296 | 1 Fleetdm | 1 Fleet | 2026-10-06 | 2.7 Low |
| Fleet is an open source osquery manager. In Fleet before version 3.7.0 a malicious actor with a valid node key can send a badly formatted request that causes the Fleet server to exit, resulting in denial of service. This is possible only while a live query is currently ongoing. We believe the impact of this vulnerability to be low given the requirement that the actor has a valid node key. There is no information disclosure, privilege escalation, or code execution. The issue is fixed in Fleet 3.7.0. | ||||
| CVE-2026-95263 | 2026-10-06 | 7.2 High | ||
| Feehi CMS 2.1.1 is vulnerable to Incorrect Access Control. A low-privilege backend administrator with administrator-update permission can change the password of the built-in super administrator account. The server does not enforce protection for this account, and the update scenario does not require the old password. | ||||
| CVE-2026-94201 | 1 Ash-project | 1 Ash | 2026-10-06 | N/A |
| Ash stores :atom-typed attributes as strings and compares them as strings. When such an attribute is referenced in a filter, the comparison value is coerced through Ash.Type.Atom. Because the type defined no coerce/2 callback, coercion fell back to the default (cast_input/2), which calls String.to_atom/1 when the attribute is configured with the unsafe_to_atom?: true constraint. Filtering such an attribute with attacker-controlled strings therefore interned a new, permanent atom for every distinct value. Atoms are never garbage collected and the BEAM caps the atom table, so an actor who can supply filter values for a public, filterable :atom attribute declared with unsafe_to_atom?: true can exhaust the atom table and crash the node (denial of service). AshPaperTrail is a notable example: its version resources expose a public, filterable version_action_name atom attribute with unsafe_to_atom?: true by default. The fix adds a coerce/2 to Ash.Type.Atom that never interns atoms — a comparison value is left as a string, since the type is stored and compared as a string. Setting the attribute from action input (cast_input/2, which still honors unsafe_to_atom?) is unchanged. This issue affects ash: from 3.5.1 before 3.34.3. | ||||
| CVE-2026-93326 | 1 Moby | 1 Buildkit | 2026-10-06 | N/A |
| A build step for a Git source, crafted in a specific way, can bypass some policy validation rules. A malicious build definition can make the repository look like it is coming from a different remote URL than it really is when Git clone is happening. If policy is doing more stricter validation, for example based on commit SHA, commit data, or signatures, then all these validations still apply correctly. | ||||
| CVE-2026-93321 | 1 Moby | 1 Buildkit | 2026-10-06 | N/A |
| A malicious frontend can submit an LLB definition that causes buildkitd to panic and terminate, interrupting all builds running on that daemon. | ||||
| CVE-2026-93315 | 1 Moby | 1 Buildkit | 2026-10-06 | N/A |
| When proxy networking with CA injection is enabled, a build can modify its CA bundle before cleanup. This may cause cleanup to block, operate outside the build rootfs, or fail without failing the build. | ||||
| CVE-2026-91140 | 2026-10-06 | 9.6 Critical | ||
| An OS command injection vulnerability in the shell-based temporary-file cleanup instructions in Progress Software Autonomous REST Connector GenAI Agents ARCGenAI-Generator version 2.0 allows an attacker who supplies a crafted Swagger/OpenAPI document to execute arbitrary commands on a developer's machine when a user invokes the generator. | ||||