Export limit exceeded: 13076 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (13076 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72686 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| A flaw in Elasticsearch allows a low-privileged authenticated user to submit a single request containing a crafted user-supplied input. A specific internal component validates the input using a recursive routine and applies no bound to the length of the value being validated, so the validation causes the thread to exhaust its stack. The resulting fatal error is not handled by the surrounding execution paths and terminates the affected node process, producing a denial of service. | ||||
| CVE-2026-72679 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| Elasticsearch does not apply its configurable input length restriction to a user-supplied pattern accepted by an intervals query. Compiling a deeply nested pattern drives unbounded recursion that exhausts the thread stack and raises a fatal error, terminating the Elasticsearch node process and causing a denial of service for that node. An authenticated user holding only read-only privileges on a single searchable index can trigger the condition with one small search request. | ||||
| CVE-2026-72683 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| A flaw in Elasticsearch allows an authenticated user with the privileges required to invoke the simulate pipeline API endpoint (https://www.elastic.co/docs/api/doc/elasticsearch/operation/operation-ingest-simulate) to submit a request that causes a self-referential data structure to be created. When a specific internal component later processes that structure, the operation recurses without bound and raises a fatal error that is not handled by the surrounding execution path, terminating the affected node process and resulting in a denial of service. | ||||
| CVE-2026-72680 | 1 Elastic | 1 Kibana | 2026-08-13 | 6.5 Medium |
| Kibana Agent Builder A2A JSON-RPC API endpoint derives the identifier of a stored conversation from a user-supplied input, and the ownership check on that identifier does not distinguish between a conversation that does not exist and one that exists but belongs to another user. As a result, an authenticated user holding only the Agent Builder read privilege can supply an identifier already in use by another user in the same space and cause that user's conversation to be replaced and reassigned to the requesting account. The original owner permanently loses access to the conversation and its history. The impact is limited to loss of integrity and availability of the affected conversation; the attacker does not read the overwritten content. | ||||
| CVE-2026-72657 | 1 Elastic | 1 Fleet Server | 2026-08-13 | 6.5 Medium |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Fleet Server can lead to information disclosure via Manipulating User-Controlled Variables (CAPEC-77). The authorization decision for artifact downloads relied on a client-supplied value that was persisted without being validated against the server-side record of the requesting agent's assignment. An authenticated party in possession of a valid enrolled agent credential could therefore retrieve a policy the agent is not assigned to. | ||||
| CVE-2026-72650 | 1 Elastic | 1 Kibana | 2026-08-13 | 4.3 Medium |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Kibana can lead to information disclosure via Accessing Functionality Not Properly Constrained by ACLs (CAPEC-1). An authenticated user who is authorized to read alerting rules in a single Kibana space could retrieve alerting rule execution telemetry that belongs to spaces the user is not authorized to access. The disclosed telemetry includes rule identifiers, rule names, space identifiers, execution outcomes, timestamps, and execution counters. | ||||
| CVE-2026-72647 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| Uncontrolled Recursion (CWE-674) in Elasticsearch can lead to denial of service via Serialized Data with Nested Payloads (CAPEC-230). An authenticated user holding only read privileges on a single index can submit one specially crafted search request whose deeply nested structure is processed without a depth limit, exhausting the thread stack and terminating the affected node. | ||||
| CVE-2026-72638 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| Uncontrolled Recursion (CWE-674) in Elasticsearch can lead to denial of service via Input Data Manipulation (CAPEC-153). An authenticated user holding only low-privileged index creation permissions can submit a single request containing a specially crafted, malformed custom analysis definition that is resolved recursively without a cycle or depth check, exhausting the thread stack and terminating the affected node. | ||||
| CVE-2026-72636 | 1 Elastic | 1 Elasticsearch | 2026-08-13 | 6.5 Medium |
| Uncontrolled Recursion (CWE-674) in the Elasticsearch wildcard matching helper can lead to a denial of service via Excessive Allocation (CAPEC-130). The matcher used to resolve wildcard patterns against names is implemented recursively and had no bound on recursion depth or on the total number of match operations performed. A search request containing a wildcard pattern with a large number of wildcard groups, evaluated against a sufficiently long name, exhausts the thread stack. Elasticsearch treats a stack overflow as an unrecoverable condition and shuts the node down, so the request terminates the affected node rather than failing gracefully. | ||||
| CVE-2026-72629 | 1 Elastic | 1 Kibana | 2026-08-13 | 7.1 High |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Kibana can lead to unauthorized cross-space access via Accessing Functionality Not Properly Constrained by ACLs (CAPEC-1). The result is disclosure of inference output from a trained model in a different space that the user is not authorized to list, read, or use, which exposes the behavior of a model. The same pattern also reached the deployment stop and deployment update operations, allowing an active trained model deployment in another space to be stopped or to have its allocated resources altered. | ||||
| CVE-2026-19487 | 1 Perl | 1 Perl | 2026-08-13 | 5.3 Medium |
| Perl versions from 5.9.4 before 5.41.9 produce incorrect regular expression match results when a stale failure flag ends the Aho-Corasick prescan early in S_find_byclass. The prescan walks the subject for positions where the full pattern could match, and the engine tries it from the leftmost one recorded. A failing transition sets the failed flag, and a later successful transition does not clear it, so the prescan reads the stale flag as a failure and stops before it can record a candidate that starts earlier. It takes a subject where one candidate is recorded and a later character then forces a fallback through a fail link that succeeds. Example: "ABCDE" =~ m/ABCF|BCDE|C/; # matches C at offset 2, not BCDE "ABCDE" =~ m/ABCF|BCDE|C(G)/; # no match, BCDE missed An alternation like this can miss input it should match, or match it on the wrong branch, so an access or filtering decision made from the result can be wrong. | ||||
| CVE-2026-73657 | 2026-08-13 | 4.2 Medium | ||
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. From 4.4.2 until 4.5.0-rc.4, `POST /api/v1/runs/:runParam/replay` in apps/webapp/app/routes/api.v1.runs.$runParam.replay.ts uses `prisma.taskRun.findUnique({ where: { friendlyId: runParam } })` without a runtimeEnvironmentId filter, then ReplayTaskRunService in apps/webapp/app/v3/services/replayTaskRun.server.ts replays the selected run in the victim environment. Any valid environment API key can therefore replay another tenant's run by friendlyId, consuming victim resources and repeating side effects; when `payloadType: "application/store"` is used, overrideExistingPayloadPacket() calls conditionallyImportPacket() on existingTaskRun.payload without an integrity check, so payload bytes overwritten through a separate object-store path-traversal vulnerability become attacker-controlled input to the victim task. This issue is fixed in version 4.5.0-rc.4. | ||||
| CVE-2025-59326 | 1 Cpsd | 1 Cryptopro Secure Disk | 2026-08-13 | 9.8 Critical |
| CPSD CryptoPro Secure Disk for Bitlocker before v7.7.4 fails to enforce IMA policy protections across temporary file systems, allowing for unsigned code to be executed from these locations. | ||||
| CVE-2026-72666 | 1 Elastic | 1 Kibana | 2026-08-13 | 6.8 Medium |
| Authorization Bypass Through User-Controlled Key (CWE-639) in Kibana can lead to unauthorized query execution against Elastic Agents that are assigned to a Kibana space the requesting user has no access to, via Accessing Functionality Not Properly Constrained by ACLs (CAPEC-1). A user who is authorized to run Osquery live queries in one space can have a query carried out on hosts belonging to another space, resulting in disclosure of information from those hosts to the Osquery results data stream. | ||||
| CVE-2026-18715 | 1 Ibm | 1 I | 2026-08-13 | 6.5 Medium |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to improper processing of XML external entities. | ||||
| CVE-2026-13757 | 2 P11-kit Project, Redhat | 9 P11-kit, Discovery, Enterprise Linux and 6 more | 2026-08-13 | 6.2 Medium |
| A flaw was found in p11-kit. The RPC message attribute parsing functions p11_rpc_message_get_attribute() and p11_rpc_message_get_attribute_array_value() form a mutually-recursive call chain with no recursion depth limit when processing nested CKA_WRAP_TEMPLATE, CKA_UNWRAP_TEMPLATE, and CKA_DERIVE_TEMPLATE attributes. An unauthenticated attacker with local access to the p11-kit RPC Unix domain socket can send a specially crafted request with deeply nested template attributes, causing stack exhaustion and crashing the p11-kit server process and its dependent services. | ||||
| CVE-2026-73656 | 2026-08-13 | 9.9 Critical | ||
| Trigger.dev is a platform for building and deploying fully managed AI agents and workflows. Prior to 4.5.6, POST /api/v1/deployments/:deploymentId/background-workers calls CreateDeploymentBackgroundWorkerServiceV4.call() in apps/webapp/app/v3/services/createDeploymentBackgroundWorkerV4.server.ts, where workerDeployment.findFirst() selects a deployment by friendlyId without an environmentId predicate. A caller with a valid API key for one project can submit another project's deployment identifier, link an attacker-owned background worker to the victim deployment, and move the victim deployment from BUILDING to DEPLOYING. This issue is fixed in version 4.5.6. | ||||
| CVE-2026-73563 | 1 Backstage | 1 Backstage | 2026-08-13 | 4.7 Medium |
| Backstage is an open framework for building developer portals. Prior to 0.29.2, the experimental dynamic client registration and client ID metadata document features in the @backstage/plugin-auth-backend use full-string matcher.isMatch glob matching for auth.experimentalDynamicClientRegistration.allowedRedirectUriPatterns and the auth.experimentalClientIdMetadataDocuments allowedClientIdPatterns and allowedRedirectUriPatterns options. A hostname wildcard can match across URL component boundaries, allowing an attacker-controlled redirect URI with a trusted hostname suffix in its path to pass the allowlist and receive an OAuth authorization code after a victim completes the flow. Patterns without an explicit protocol can match unintended protocols, and redirect URIs containing embedded credentials are accepted after user information is stripped for matching. The features are experimental and disabled by default; only deployments that enable them and configure custom wildcard-hostname or protocol-less patterns are affected. This issue is first fixed in prerelease version 0.29.2. | ||||
| CVE-2026-62295 | 1 Hapifhir | 1 Hl7 Fhir Core | 2026-08-13 | 7.5 High |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to 6.9.11, the JSON utility parser in org.hl7.fhir.utilities.json.parser.JsonParser enforces no maximum nesting depth for arrays or objects. As a result, a small but deeply nested, syntactically valid FHIR JSON document can trigger unbounded readArray() or readObject() recursion, raising a StackOverflowError before structural validation runs. An attacker who can submit JSON resources for validation can thus crash the request thread, and services that do not isolate StackOverflowError safely may experience worker loss or process instability — a denial-of-service condition. This issue is fixed in version 6.9.11. | ||||
| CVE-2026-58445 | 1 Gitea | 1 Gitea Open Source Git Server | 2026-08-13 | N/A |
| Cross-repository label-ID enumeration oracle via unscoped DeleteIssueLabel API | ||||