| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Typesense is a fast, typo-tolerant search engine. Prior to versions 29.1 and 30.2, there is an unauthenticated denial-of-service vulnerability in the /multi_search endpoint. A specially crafted request can trigger an unhandled exception during request processing, causing the server process to terminate. This issue can be exploited over the network without authentication and results in service unavailability. The duration of impact may vary depending on system configuration and dataset size. This issue has been patched in versions 29.1 and 30.2. |
| When Routinator encounters a file via RRDP using a specifically crafted Document Type Definition, Routinator crashes. |
| A memory corruption vulnerability in the processing of tunnel traffic in Palo Alto Networks PAN-OS® software allows an authenticated user to initiate system reboots using a maliciously crafted packet. Repeated attempts to initiate a reboot causes the firewall to enter maintenance mode.
Panorama, Cloud NGFW, and Prisma® Access are not impacted by this vulnerability. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. network-libp2p handles kad get-record query progress in handle_dht_get (network-libp2p/src/swarm.rs). Prior to version 1.4.0, when a peer returns a FoundRecord, the code verifies the record via dht_verifier.verify(&record.record). On verifier error, handle_dht_get logs and returns early without completing the oneshot used by Network::dht_get, and without cleaning up per-query bookkeeping. Later query progress can hit the "DHT inconsistent state" path and also return without cleanup. Because Network::dht_get awaits the oneshot without a timeout, the caller future can hang indefinitely. This issue has been patched in version 1.4.0. |
| Ghidra before 11.2 contains a use after free vulnerability in the Sleigh backend caused by undefined static initialization order of the SleighArchitecture::translators and XmlArchitectureCapability singletons. Attackers can trigger an infinite loop or denial of service during shutdown by exploiting the unsafe destruction order that causes iteration over deallocated memory. |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to version 1.4.0, iIn handle_dht_get(), the DhtResults accumulator is only initialized when the first DHT record passes verification. If the first record fails (from a malicious DHT node), DhtResults is never created, and all subsequent valid records are discarded with "DHT inconsistent state" errors. This issue has been patched in version 1.4.0. |
| An issue was discovered in Malwarebytes 4.x and 5.x (and Nebula 2020-10-21 and later). A large number of Firefox preference files can cause the parser to ignore other browser configuration files, leading to a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/waitid: clear waitid info before copying it to userspace
IORING_OP_WAITID stores its result fields in struct io_waitid::info and
later copies them to userspace siginfo. The prep path initializes the
request arguments, but it does not initialize info itself.
If the wait operation completes without reporting a child event, the common
wait code can return without writing wo_info. In that case io_waitid_finish()
still copies iw->info to userspace, exposing stale bytes from the reused
io_kiocb command storage.
Clear the result storage during prep so the io_uring path matches the
regular waitid syscall, which uses a zero-initialized struct waitid_info. |
| Multiple denial of service vulnerabilities in Palo Alto Networks PAN-OS® software allow an unauthenticated attacker with network access to cause a denial of service (DoS) condition by sending specially crafted network traffic.
Panorama and Cloud NGFW are not impacted by these vulnerabilities. |
| Routinator exits on any error when accepting incoming HTTP or RTR connections, including ones it can recover from such as running out of file descriptors. This condition can be triggered maliciously by an attacker by opening a large number of connections to the HTTP or RTR server.
This only affects users that make their HTTP or RTR server available to untrusted networks. |
| Mattermost Plugins versions <=11.4 10.11.11.0 fail to validate webhook request timestamps which allows an attacker to corrupt Zoom meeting state in Mattermost via replayed webhook requests. Mattermost Advisory ID: MMSA-2026-00584 |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Mattermost Desktop App versions <=6.1 6.0.1 5.4.13.0 fail to prevent server-rendered content from closing an underlying application view in the Mattermost Desktop App which allows a malicious server or plugin to crash the desktop client via invoking {{window.close()}} in the renderer context, leading to a denial of service condition at the client level. Mattermost Advisory ID: MMSA-2026-00633 |
| Cpanel::JSON::XS versions before 4.41 for Perl allow denial of service via UTF-8 BOM prefixed input when a decode filter callback throws.
To skip a leading 3-byte UTF-8 BOM, decode_json() advances the input scalar's string pointer past the mark with SvPV_set() and restores it only on the normal return path. When decoding aborts through a Perl exception, for example a filter_json_object callback that croaks, the restore is skipped and the scalar is left with its string pointer offset into its own buffer and a shortened length.
When that scalar is later freed, the allocator receives an invalid pointer and the interpreter aborts. A single BOM prefixed document decoded with a throwing filter callback crashes any caller. |
| electerm is an open-sourced terminal/ssh/sftp/telnet/serialport/RDP/VNC/Spice/ftp client. Prior to 3.9.5, deterministic AES-192-CBC with a fixed zero IV, constant KDF salt, and no MAC leads to confidentiality and integrity failures for synced bookmark/profile data. Attackers can crack common passwords across installs and perform undetected ciphertext bit-flips to alter config/bookmarks. This vulnerability is fixed in 3.9.5. |
| OpenTelemetry eBPF Instrumentation provides eBPF instrumentation based on the OpenTelemetry standard. Prior to version 0.9.0, the Postgres protocol parser assumes BIND message payloads contain a valid NUL-terminated portal name. A crafted empty or unterminated payload can make OBI slice beyond the end of the captured buffer and panic. This issue has been patched in version 0.9.0. |
| A vulnerability has been identified in SIMATIC CP 443-1 OPC UA (All versions), SIMATIC ET 200SP Open Controller CPU 1515SP PC2 (incl. SIPLUS variants) (All versions < V2.7), SIMATIC HMI Comfort Outdoor Panels 7" & 15" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI Comfort Panels 4" - 22" (incl. SIPLUS variants) (All versions < V15.1 Upd 4), SIMATIC HMI KTP Mobile Panels KTP400F, KTP700, KTP700F, KTP900 and KTP900F (All versions < V15.1 Upd 4), SIMATIC IPC DiagMonitor (All versions < V5.1.3), SIMATIC NET PC Software V13 (All versions), SIMATIC NET PC Software V14 (All versions < V14 SP1 Update 14), SIMATIC NET PC Software V15 (All versions), SIMATIC RF188C (All versions < V1.1.0), SIMATIC RF600R family (All versions < V3.2.1), SIMATIC S7-1500 CPU family (incl. related ET200 CPUs and SIPLUS variants) (All versions >= V2.5 < V2.6.1), SIMATIC S7-1500 Software Controller (All versions between V2.5 (including) and V2.7 (excluding)), SIMATIC WinCC OA (All versions < V3.15 P018), SIMATIC WinCC Runtime Advanced (All versions < V15.1 Upd 4), SINEC NMS (All versions < V1.0 SP1), SINEMA Server (All versions < V14 SP2), SINUMERIK OPC UA Server (All versions < V2.1), TeleControl Server Basic (All versions < V3.1.1). Specially crafted network packets sent to affected devices on port 4840/tcp could allow an unauthenticated remote attacker to cause a denial of service condition of the OPC communication or crash the device. The security vulnerability could be exploited by an attacker with network access to the affected systems. Successful exploitation requires no system privileges and no user interaction. An attacker could use the vulnerability to compromise availability of the OPC communication. |
| Casdoor versions 2.362.0 and earlier contain a vulnerability enabling cross-organization token exchange. The GetTokenExchangeToken function in object/token_oauth.go validates JWT signatures but does not verify that the token's user belongs to the same organization as the target application. This can result in privilege escalation across organizational boundaries. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Samsung Open Source Escargot allows Input Data Manipulation.
This issue affects Escargot: 590345cc6258317c5da850d846ce6baaf2afc2d3. |
| Improper check for unusual or exceptional conditions vulnerability in SSO in Synology DiskStation Manager (DSM) before 7.2.2-72806-5 and 7.3.1-86003-1 (7.2.1-69057 is not affected) allows remote attackers to bypass authentication with prior knowledge of the distinguished name (DN). |
