| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: leave HasEA flag untouched on setxattr failure
In ntfs_set_ea(), the exit path unconditionally updates the HasEA
flag based on ea_info_qsize. When an error occurs before
ea_info_qsize is updated, NInoClearHasEA() hides existing on-disk
EAs until the inode is evicted.
Only update the flag on success. |
| pg_partman is a PostgreSQL extension that manages partitioned tables by time or ID. Prior to 5.5.0, run_maintenance() handles exceptions outside the loop that processes rows from part_config, so an exception for one partition set immediately terminates the loop and skips every later set. A role with partman_user access can insert or update a row that reliably fails and assign it a low maintenance_order value so it is processed before legitimate rows. Repeated maintenance ticks then abort before legitimate partition sets are maintained, causing database-wide loss of automated partition maintenance. This issue is fixed in version 5.5.0. |
| Netty is an asynchronous, event-driven network application framework. Prior to 4.1.136.Final and 4.2.16.Final, the RedisArrayAggregator Redis codec clears retained partial aggregate state when the maxNestedArrayDepth limit is exceeded, but it does not clear the same state when the sibling maxElements limit is exceeded. A peer can start a valid RESP array, send a bulk string child, then send a nested array header longer than the configured maxElements. Netty throws a decoder exception in decodeRedisArrayHeader, but the existing partial aggregate remains retained in the handler. If the application leaves the channel alive after the exception, later messages are still consumed into the pre-error aggregate, allowing an unauthenticated peer to keep attacker-controlled aggregate state alive across a security-limit exception and pin retained pooled buffers. This issue is fixed in versions 4.1.136.Final and 4.2.16.Final. |
| Parseable is a log analytics platform built for high-volume data ingestion and analysis. Prior to 3.0.0, src/handlers/http/middleware.rs uses unwrap() while parsing the x-amz-firehose-common-attributes header before authentication. A remote unauthenticated attacker can supply non-UTF-8 header data, malformed JSON, or invalid derived header values that trigger a Rust panic and interrupt request handling, allowing repeated requests to deny service or cause container restart loops. This issue is fixed in version 3.0.0. |
| An issue in Robotics-STAR-Lab (SYSU STAR Group) RACER Tested affected version: commit abcdef1234567890 allows an attacker to cause a denial of service via the exploration state machine |
| An issue in ZJU-FAST-Lab EGO-Planner-v2 All versions up to commit 5c99a95880401e2599638d567abc0e240396cb42 allows unsafe vehicle motion via improper handling of expired trajectory data in the replanning pipeline |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20329 are related to issues concerning improper handling of exceptional conditions that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-703. |
| In the Linux kernel, the following vulnerability has been resolved:
csky: Fix a4/a5 restoration in syscall trace path
The syscall trace path reloads syscall arguments from pt_regs before
calling the syscall handler. On C-SKY ABIv2, the 5th and 6th syscall
arguments are prepared as stack arguments before invoking syscallid.
The current code adjusts sp before loading LSAVE_A4 and LSAVE_A5. Since
those offsets are relative to the original pt_regs base, loading them
after changing sp fetches the wrong slots. As a result, traced syscalls
that use the 5th or 6th argument may receive corrupted arguments.
This is visible with mmap2(), which takes six arguments. A small
PTRACE_SYSCALL reproducer opens a file and maps one page with:
mmap(NULL, 4096, PROT_READ | PROT_EXEC, MAP_PRIVATE, fd, 0)
Before the fix, the traced child fails the mmap and exits with 12.
After the fix, the mapping succeeds and the child exits with 0.
Fix the trace path by loading a4/a5 from pt_regs before changing sp.
Tested on: ck860f, linux-4.19.15, C-SKY abiv2 |
| Higress before 2.2.4 panics when processing a Cookie header segment without an equals sign, causing the plugin wrapper to recover and return a continue action that bypasses AI token rate limiting. Unauthenticated attackers can craft a malformed Cookie header to skip rate limit checks and exceed thresholds intended to restrict costly model backend calls. |
| Netty is a network application framework for development of protocol servers and clients. In netty-codec-haproxy prior to versions 4.1.135.Final and 4.2.15.Final, when decoding a PP2_TYPE_SSL TLV, HAProxyMessage.readNextTLV() first calls `header.retainedSlice(header.readerIndex(), length)` and only then reads the 1-byte client field and 4-byte verify field. If the attacker sets the TLV length below 5, the subsequent readByte/readInt throws IndexOutOfBoundsException. HAProxyMessageDecoder only catches HAProxyProtocolException around this call, so the IOOBE propagates and the retained slice on the pooled cumulation buffer is never released. Versions 4.1.135.Final and 4.2.15.Final patch the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20280 are related to improper checking or handling of exceptional condition issues that are grouped under the Common Weakness Enumeration (CWE) CWE-703. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6.1, iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6.1 and iPadOS 26.6.1, macOS Tahoe 26.6.2, visionOS 27. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| Dell SCG 5.0 Appliance versions prior to 5.36.00.16 and Dell SCG 5.0 Application versions prior to 5.36.00.00, contains an Improper Check or Handling of Exceptional Conditions vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to protection mechanism bypass. |
| Gardens v2 is a modular governance framework that enables communities to create and manage multiple governance pools with customizable parameters and voting mechanisms. In dfba919e218e20d52db9f7b2e8d292d45a46c91b and prior, normal beneficiary payout paths in StreamingEscrow preserve depositAmount() while an active stream needs an escrow reserve. However, the approve-side dispute resolution path drains the whole available escrow balance to the proposal beneficiary. At time of publication, there are no publicly known patches. |
| In the Linux kernel, the following vulnerability has been resolved:
clk: qcom: dispcc-eliza: Fix disp_cc_mdss_mdp_clk_src RCG stall on Eliza EVK
Eliza EVK (eliza-cqs-evk.dts) does not have display enabled, however its
Display Clock Controller is enabled and references parent clocks from
DSI PHYs, which causes clock reparenting issues during probe (init) and
warning on Eliza EVK:
disp_cc_mdss_mdp_clk_src: rcg didn't update its configuration.
WARNING: drivers/clk/qcom/clk-rcg2.c:136 at update_config+0xd4/0xe4, CPU#1: udevd/273
...
update_config (drivers/clk/qcom/clk-rcg2.c:136 (discriminator 2)) (P)
clk_rcg2_shared_disable (drivers/clk/qcom/clk-rcg2.c:1471)
clk_rcg2_shared_init (drivers/clk/qcom/clk-rcg2.c:1540)
__clk_register (drivers/clk/clk.c:3959 drivers/clk/clk.c:4368)
devm_clk_hw_register (drivers/clk/clk.c:4448 (discriminator 1) drivers/clk/clk.c:4672 (discriminator 1))
devm_clk_register_regmap (drivers/clk/qcom/clk-regmap.c:104)
qcom_cc_really_probe (drivers/clk/qcom/common.c:418)
qcom_cc_probe (drivers/clk/qcom/common.c:445)
disp_cc_eliza_probe (dispcc-eliza.c:?) dispcc_eliza
platform_probe (drivers/base/platform.c:1432) |
