| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: dwc: ep: Flush cached MSI write before unmapping the iATU
The MSI-X path already flushes any posted MSI-X write before tearing down
its iATU mapping. That was added by commit c22533c66cca ("PCI: dwc: ep:
Flush MSI-X write before unmapping its ATU entry") to make sure the write
reaches the Root Complex before the outbound window that translates it
disappears.
The MSI path has the same problem but no equivalent flush. When the
Endpoint driver caches an MSI target address and later observes that the
Root Complex has changed it, dw_pcie_ep_raise_msi_irq() unmaps the existing
iATU entry and reprograms it for the new address. Between the last MSI
writel() and the unmap there may still be a posted write sitting in the
fabric, and unmapping the iATU entry can drop or misroute that write.
Fix this by reading back from the mapped MSI window before the unmap. The
readback drains any posted MSI writes through the same iATU entry that
mapped them, which is the same logic the MSI-X path uses.
[mani: commit log] |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Adaptive Security Appliance Software, Cisco Secure Firewall Threat Defense Software and Cisco Secure Firewall Management Center Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20336 are related to issues concerning improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: arm_scmi: Unwind P2A receiver mailbox setup failure
mailbox_chan_setup() can request an additional P2A receiver channel after
successfully acquiring the primary P2A channel. If that later request
fails, the function returns immediately and leaves the primary channel
allocated.
Unwind the primary mailbox channel before returning the error so probe
deferral or other setup failures do not leave the channel busy for later
probe attempts. |
| A logic issue was addressed with improved state management. This issue is fixed in Safari 27, iOS 27 and iPadOS 27, macOS Golden Gate 27, tvOS 27, visionOS 27, watchOS 27. Processing maliciously crafted web content may lead to an unexpected process termination. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco Secure Email Gateway and Cisco Secure Email and Web Manager engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20353 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XR Software engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20274 are related to improper resource control issues that are grouped under the Common Weakness Enumeration (CWE) CWE-664. |
| netty-incubator-codec-ohttp implements Oblivious HTTP (OHTTP) gateway and client functionality using Netty. Prior to 0.0.23.Final, the OHTTP gateway decryption path in codec-ohttp/src/main/java/io/netty/incubator/codec/ohttp/OHttpRequestResponseContext.java allocates a pooled direct ByteBuf for decrypted plaintext before the AEAD tag is verified. When an invalid tag causes decryptChunk() to throw CryptoException, OHttpRequestResponseContext.decodeChunk() does not release the ByteBuf because the allocation is not guarded by try/finally. Repeated invalid encrypted requests can therefore leak native off-heap memory until the gateway is unable to continue serving requests. This issue is fixed in version 0.0.23.Final. |
| PocketMine-MP versions before 5.39.2 fail to validate entity despawn state when processing attack packets from clients. Attackers can exploit a race condition by attacking a disconnecting player to trigger multiple death handlers, causing inventory items and experience to drop multiple times for duplication. |
| x86 PV guests can free memory pages while still keeping a stale TLB entry
pointing to them. A TLB flush is only issued by Xen (if needed) when the
page is re-used. Since it's possible for the page to be scrubbed ahead of
the TLB flush, there's a window where a PV guest can modify an already
scrubbed page. |
| @fastify/multipart is a multipart form-data parser for Fastify. In versions from 5.3.0 up to but not including 10.1.1, when the busboy fileSize limit truncates a file part, the plugin clears its internal current-file reference while the underlying stream is still open. If the client then aborts the connection before sending the terminating boundary, the abort cleanup finds no stream to destroy, so saveRequestFiles() never settles, the request handler hangs, and the temporary file already written to disk is never cleaned up. An unauthenticated client can repeat this to permanently leak temporary files and suspended handler executions, leading to disk and event-loop exhaustion. The issue is fixed in @fastify/multipart 10.1.1. Users should upgrade to 10.1.1. |
| Improper control of a resource through its lifetime in Workers in Google Chrome prior to 152.0.7977.65 allowed a remote attacker who had compromised the renderer process to bypass site isolation via a crafted HTML page. (Chromium security severity: Low) |
| This issue was addressed through improved state management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6. Visiting a website may lead to an app denial-of-service. |
| This issue was addressed through improved state management. This issue is fixed in iOS 18.7.10 and iPadOS 18.7.10, iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to access sensitive user data. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco IOS XE Software engineering team has conducted a comprehensive internal security review. This review resulted in software hardening releases that address multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20269 are related to issues with improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| As part of Cisco's ongoing commitment to proactive security and product quality, the Cisco RoomOS engineering team has conducted a comprehensive internal security review. This review resulted in a software hardening release that addresses multiple internally discovered vulnerabilities.
The vulnerabilities tracked by CVE-2026-20158 are related to improper control of a resource through its lifetime that are grouped under the Common Weakness Enumeration (CWE) Pillar CWE-664. |
| OpenPLC Runtime v3 contains an input validation flaw in the /upload-program-action endpoint: the epoch_time field supplied during program uploads is not validated and can be crafted to induce corruption of the programs database. After a successful malformed upload the runtime continues to operate until a restart; on restart the runtime can fail to start because of corrupted database entries, resulting in persistent denial of service requiring complete rebase of the product to recover. This vulnerability was remediated by commit 095ee09. |
| A vulnerability in the local malware analysis process of Cisco Firepower Threat Defense (FTD) Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on the affected device. This vulnerability is due to insufficient error handling in the local malware analysis process of an affected device. An attacker could exploit this vulnerability by sending a crafted file through the device. A successful exploit could allow the attacker to cause the local malware analysis process to crash, which could result in a DoS condition. Notes: Manual intervention may be required to recover from this situation. Malware cloud lookup and dynamic analysis will not be impacted. |
| A vulnerability was identified in Mullvad wireguard.sys 0.10.1. The affected element is the function AdapterState of the component IOCTL Handler. Such manipulation leads to improper update of reference count. Local access is required to approach this attack. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: set ATTR_CTIME flags when setting mtime
David reported that the new warning from setattr_copy_mgtime is coming
like the following.
[ 113.215316] ------------[ cut here ]------------
[ 113.215974] WARNING: CPU: 1 PID: 31 at fs/attr.c:300 setattr_copy+0x1ee/0x200
[ 113.219192] CPU: 1 UID: 0 PID: 31 Comm: kworker/1:1 Not tainted 6.13.0-rc1+ #234
[ 113.220127] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
[ 113.221530] Workqueue: ksmbd-io handle_ksmbd_work [ksmbd]
[ 113.222220] RIP: 0010:setattr_copy+0x1ee/0x200
[ 113.222833] Code: 24 28 49 8b 44 24 30 48 89 53 58 89 43 6c 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc 48 89 df e8 77 d6 ff ff e9 cd fe ff ff <0f> 0b e9 be fe ff ff 66 0
[ 113.225110] RSP: 0018:ffffaf218010fb68 EFLAGS: 00010202
[ 113.225765] RAX: 0000000000000120 RBX: ffffa446815f8568 RCX: 0000000000000003
[ 113.226667] RDX: ffffaf218010fd38 RSI: ffffa446815f8568 RDI: ffffffff94eb03a0
[ 113.227531] RBP: ffffaf218010fb90 R08: 0000001a251e217d R09: 00000000675259fa
[ 113.228426] R10: 0000000002ba8a6d R11: ffffa4468196c7a8 R12: ffffaf218010fd38
[ 113.229304] R13: 0000000000000120 R14: ffffffff94eb03a0 R15: 0000000000000000
[ 113.230210] FS: 0000000000000000(0000) GS:ffffa44739d00000(0000) knlGS:0000000000000000
[ 113.231215] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 113.232055] CR2: 00007efe0053d27e CR3: 000000000331a000 CR4: 00000000000006b0
[ 113.232926] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 113.233812] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 113.234797] Call Trace:
[ 113.235116] <TASK>
[ 113.235393] ? __warn+0x73/0xd0
[ 113.235802] ? setattr_copy+0x1ee/0x200
[ 113.236299] ? report_bug+0xf3/0x1e0
[ 113.236757] ? handle_bug+0x4d/0x90
[ 113.237202] ? exc_invalid_op+0x13/0x60
[ 113.237689] ? asm_exc_invalid_op+0x16/0x20
[ 113.238185] ? setattr_copy+0x1ee/0x200
[ 113.238692] btrfs_setattr+0x80/0x820 [btrfs]
[ 113.239285] ? get_stack_info_noinstr+0x12/0xf0
[ 113.239857] ? __module_address+0x22/0xa0
[ 113.240368] ? handle_ksmbd_work+0x6e/0x460 [ksmbd]
[ 113.240993] ? __module_text_address+0x9/0x50
[ 113.241545] ? __module_address+0x22/0xa0
[ 113.242033] ? unwind_next_frame+0x10e/0x920
[ 113.242600] ? __pfx_stack_trace_consume_entry+0x10/0x10
[ 113.243268] notify_change+0x2c2/0x4e0
[ 113.243746] ? stack_depot_save_flags+0x27/0x730
[ 113.244339] ? set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.244993] set_file_basic_info+0x130/0x2b0 [ksmbd]
[ 113.245613] ? process_scheduled_works+0xbe/0x310
[ 113.246181] ? worker_thread+0x100/0x240
[ 113.246696] ? kthread+0xc8/0x100
[ 113.247126] ? ret_from_fork+0x2b/0x40
[ 113.247606] ? ret_from_fork_asm+0x1a/0x30
[ 113.248132] smb2_set_info+0x63f/0xa70 [ksmbd]
ksmbd is trying to set the atime and mtime via notify_change without also
setting the ctime. so This patch add ATTR_CTIME flags when setting mtime
to avoid a warning. |
