| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sending "NOOP (((...)))" command with 4000 parenthesis open+close results in ~1MB extra memory usage. Longer commands will result in client disconnection. This 1 MB can be left allocated for longer time periods by not sending the command ending LF. So attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Attacker could connect possibly from even a single IP and create 1000 connections to allocate 1 GB of memory, which would likely result in reaching VSZ limit and killing the process and its other proxied connections. Install fixed version, there is no other remediation. No publicly available exploits are known. |
| Attacker can send a specifically crafted message before authentication that causes managesieve to allocate large amount of memory.
Attacker can force managesieve-login to be unavailable by repeatedly crashing the process. Protect access to managesieve protocol, or install fixed version. No publicly available exploits are known. |
| A mail message containing excessive amount of RFC 2231 MIME parameters causes LMTP to use too much CPU. A suitably formatted mail message causes mail delivery process to consume large amounts of CPU time. Use MTA capabilities to limit RFC 2231 MIME parameters in mail messages, or upgrade to fixed version where the processing is limited. No publicly available exploits are known. |
| A security flaw has been discovered in Open5GS 2.7.6. This issue affects the function smf_gx_cca_cb/smf_gy_cca_cb/smf_s6b of the component CCA Message Handler. The manipulation results in denial of service. The attack may be launched remotely. Attacks of this nature are highly complex. The exploitability is assessed as difficult. The exploit has been released to the public and may be used for attacks. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: get rid of the xchk_xfile_*_descr calls
The xchk_xfile_*_descr macros call kasprintf, which can fail to allocate
memory if the formatted string is larger than 16 bytes (or whatever the
nofail guarantees are nowadays). Some of them could easily exceed that,
and Jiaming Zhang found a few places where that can happen with syzbot.
The descriptions are debugging aids and aren't required to be unique, so
let's just pass in static strings and eliminate this path to failure.
Note this patch touches a number of commits, most of which were merged
between 6.6 and 6.14. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix reservation leak in some error paths when inserting inline extent
If we fail to allocate a path or join a transaction, we return from
__cow_file_range_inline() without freeing the reserved qgroup data,
resulting in a leak. Fix this by ensuring we call btrfs_qgroup_free_data()
in such cases. |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| The Grafana MSSQL data source plugin contains a logic flaw that allows a low-privileged user (Viewer) to bypass API restrictions and trigger a catastrophic Out-Of-Memory (OOM) memory exhaustion, crashing the host container. |
| LiquidJS is a Shopify / GitHub Pages compatible template engine in pure JavaScript. Prior to version 10.25.1, LiquidJS's `memoryLimit` security mechanism can be completely bypassed by using reverse range expressions (e.g., `(100000000..1)`), allowing an attacker to allocate unlimited memory. Combined with a string flattening operation (e.g., `replace` filter), this causes a V8 Fatal error that crashes the Node.js process, resulting in complete denial of service from a single HTTP request. Version 10.25.1 patches the issue. |
| NATS-Server is a High-Performance server for NATS.io, a cloud and edge native messaging system. Prior to versions 2.11.14 and 2.12.5, if the nats-server has the "leafnode" configuration enabled (not default), then anyone who can connect can crash the nats-server by triggering a panic. This happens pre-authentication and requires that compression be enabled (which it is, by default, when leafnodes are used). Versions 2.11.14 and 2.12.5 contain a fix. As a workaround, disable compression on the leafnode port. |
| The brace-expansion library generates arbitrary strings containing a common prefix and suffix. Prior to versions 5.0.5, 3.0.2, 2.0.3, and 1.1.13, a brace pattern with a zero step value (e.g., `{1..2..0}`) causes the sequence generation loop to run indefinitely, making the process hang for seconds and allocate heaps of memory. Versions 5.0.5, 3.0.2, 2.0.3, and 1.1.13 fix the issue. As a workaround, sanitize strings passed to `expand()` to ensure a step value of `0` is not used. |
| A testdata data-source can be used to trigger out-of-memory crashes in Grafana. |
| Vikunja is an open-source self-hosted task management platform. Starting in version 1.0.0-rc0 and prior to version 2.2.0, unbounded image decoding and resizing during preview generation lets an attacker exhaust CPU and memory with highly compressed but extremely large-dimension images. Version 2.2.0 patches the issue. |
| PinchTab is a standalone HTTP server that gives AI agents direct control over a Chrome browser. PinchTab `v0.8.4` contains a Windows-only command injection issue in the orphaned Chrome cleanup path. When an instance is stopped, the Windows cleanup routine builds a PowerShell `-Command` string using a `needle` derived from the profile path. In `v0.8.4`, that string interpolation escapes backslashes but does not safely neutralize other PowerShell metacharacters. If an attacker can launch an instance using a crafted profile name and then trigger the cleanup path, they may be able to execute arbitrary PowerShell commands on the Windows host in the security context of the PinchTab process user. This is not an unauthenticated internet RCE. It requires authenticated, administrative-equivalent API access to instance lifecycle endpoints, and the resulting command execution inherits the permissions of the PinchTab OS user rather than bypassing host privilege boundaries. Version 0.8.5 contains a patch for the issue. |
| TSPortal is the WikiTide Foundation’s in-house platform used by the Trust and Safety team to manage reports, investigations, appeals, and transparency work. Prior to version 34, a flaw in TSPortal allowed attackers to create arbitrary user records in the database by abusing validation logic. While validation correctly rejected invalid usernames, a side effect within a validation rule caused user records to be created regardless of whether the request succeeded. This could be exploited to cause uncontrolled database growth, leading to a potential denial of service (DoS). Version 34 contains a fix for the issue. |
| Impact:
A bad regular expression is generated any time you have multiple sequential optional groups (curly brace syntax), such as `{a}{b}{c}:z`. The generated regex grows exponentially with the number of groups, causing denial of service.
Patches:
Fixed in version 8.4.0.
Workarounds:
Limit the number of sequential optional groups in route patterns. Avoid passing user-controlled input as route patterns. |
| A memory leak exists in the Grassroots DICOM library (GDCM). The bug occurs when parsing malformed DICOM files with non-standard VR types in file meta information. The vulnerability leads to vast memory allocations and resource depletion, triggering a denial-of-service condition. A maliciously crafted file can fill the heap in a single read operation without properly releasing it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Enable exception fixup for specific ADE subcode
This patch allows the LoongArch BPF JIT to handle recoverable memory
access errors generated by BPF_PROBE_MEM* instructions.
When a BPF program performs memory access operations, the instructions
it executes may trigger ADEM exceptions. The kernel’s built-in BPF
exception table mechanism (EX_TYPE_BPF) will generate corresponding
exception fixup entries in the JIT compilation phase; however, the
architecture-specific trap handling function needs to proactively call
the common fixup routine to achieve exception recovery.
do_ade(): fix EX_TYPE_BPF memory access exceptions for BPF programs,
ensure safe execution.
Relevant test cases: illegal address access tests in module_attach and
subprogs_extable of selftests/bpf. |
