| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A security flaw has been discovered in MingSoft MCMS up to 3.0.6. Affected is an unknown function of the file /mdiy/form/get of the component ms-mdiy. The manipulation results in information disclosure. It is possible to launch the attack remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in MingSoft MCMS up to 3.0.6. This impacts an unknown function of the file /mdiy/form/data/list of the component ms-mdiy. The manipulation leads to information disclosure. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The PiWeb Cancel order / Refund request for WooCommerce WordPress plugin before 1.3.4.34 does not have authorization or ownership checks when adding the contents of a previous order to the cart, allowing unauthenticated users to disclose the contents of other customers' orders, as well as to clear and repopulate a logged in user's cart via a crafted link. |
| The GeoDirectory WordPress plugin before 2.8.169 does not perform any authorization check when returning map marker data for a single requested listing, allowing unauthenticated users to disclose the title and exact geographic coordinates of non-public (pending or draft) listings. |
| The Create WordPress plugin before 2.5.4 does not perform an authorization check before returning content over one of its REST API routes, and that route additionally publishes the requested content as a side effect, allowing unauthenticated attackers to read unpublished content and to make it publicly available. |
| The Create WordPress plugin before 2.5.4 does not perform an authorization check before rendering content over one of its public REST API routes, and that route additionally publishes the requested content as a side effect, allowing unauthenticated attackers to read unpublished content and to make it publicly available. |
| Hono is a Web application framework that provides support for any JavaScript runtime. From 4.7.0 to 4.12.33, the Proxy Helper proxy() function in hono/proxy does not remove response headers named by the origin's Connection header. Per RFC 9110 Section 7.6.1, an intermediary must remove the header fields listed in a message's Connection header field before forwarding the message, in addition to the well known hop by hop headers, but the proxy() function only removed the well known hop by hop headers, including Connection itself, from origin responses. A client may therefore receive response headers that the origin intended only for its immediate peer, disclosing connection scoped or internal metadata contained in such headers, when an application proxies responses from an origin that declares additional, non standard headers as hop by hop via the Connection response header. This issue is fixed in version 4.12.34. |
| The WP Directory Kit WordPress plugin before 1.5.5 does not perform authorization or nonce checks on one of its authenticated AJAX actions, allowing any authenticated user such as a Subscriber to disclose the WP Directory Kit WordPress plugin before 1.5.5 settings including sensitive API keys and secrets. |
| The Solace Extra WordPress plugin before 1.6.1 does not perform capability checks in several of its AJAX actions and exposes the nonce that protects them on admin pages reachable by low-privileged users, allowing users with a role as low as Subscriber to modify site-wide presentation settings and delete imported site-builder content. |
| Memory Leak to an Unauthorized Actor vulnerability in Tobit Laboratories AG TeamDavid's Webbox allows reading of sensitive information. When accessing the URL “/.well-known/mta-sts.”, the application responds
with memory. By repeatedly
requesting this endpoint, an attacker can access sensitive
information, including user passwords. Exploitation does not require
authentication. This issue affects TeamDavid through Rollout 524. |
| OPeNDAP Hyrax allows SSRF and credential disclosure via unvalidated HTTP redirects that bypass the AllowedHosts allowlist and leak Earthdata headers (User-Id, Echo-Token) to attacker-controlled endpoints. |
| In versions of the Datadog Android application prior to v545-5.9.2, the app tags Crashlytics data with the user's Datadog UUID, with no user-facing opt-out.
Impact: The Datadog user UUID and crash data are visible within Firebase Crashlytics. This UUID is not identifying outside Datadog's own systems. |
| Element Call is a native Matrix video conferencing application. Versions 0.5.17 through 0.19.3 report analytics data to a PostHog server, when configured to by a `posthog` key in config.json or by the `posthogApiHost` and `posthogApiKey` URL parameters. Several fields of this data (`$initial_person_info`, `$session_entry_url`, and `$current_url`) were found to contain the full URL of the user's visited page, including the fragment. Users of a standalone Element Call ‘SPA’ instance such as https://call.element.io may therefore have reported the full URLs of certain calls, including encryption passwords, to the configured PostHog server, potentially compromising the confidentiality of the calls to actors who could access both the PostHog analytics data and the encrypted media streams. The same issue is present in Element Call's embedded package, but in practice it does not impact applications using this package (including Element Web, Element Desktop, Element X iOS, and Element X Android) because they distribute encryption keys over Matrix rather than encoding a password in the URL. The issue is patched in Element Call 0.19.4. Some workarounds are available. Users may opt out of analytics in the 'Feedback' tab of Element Call's settings and create new links for future calls. Admins who host Element Call as a standalone application may disable PostHog analytics entirely by removing the `posthog` key from their deployment's config.json file. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Put vmcs12 pages if nested VM-Enter fails due to invalid guest state
Put all vmcs12 pages if KVM synthesizes a nested VM-Exit due to invalid
guest while emulating VMLAUNCH or VMRESUME. The invalid guest state path
doesn't use nested_vmx_vmexit() as that API is intended to be used if and
only if L2 is active, and the open coded equivalent neglects to put the
vmcs12 pages. Failure to put the vmcs12 pages leaks any pinned pages
(and/or mappings) if L1 retries VMLAUNCH/VMRESUME.
Note, the !from_vmenter scenario doesn't suffer the same problem, as
vmx_get_nested_state_pages() only gets/pins/maps the vmcs12 pages if L2 is
active, i.e. if a "full" VM-Exit is guaranteed before KVM will retry
getting vmcs12 pages. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.5, the unauthenticated `/api/tenants/{id}/schedule` endpoint returns every non-archived channel for a tenant regardless of the channel's `isPublic` flag. Channels marked `isPublic = false` are intended to be invisible to public callers; the dashboard creates them deliberately to hide internal-only services from the patient booking UI. The schedule endpoint ignores the flag entirely and discloses channel names, descriptions, IDs, agent associations, pause status, confirmation requirements, and computed slot availability for the requested date range. The asymmetry between `addAppointmentToTunnel` (which enforces `eq(channel.isPublic, true)`) and the schedule endpoint (which does not) confirms the design intent: private channels exist as a real access boundary in the booking flow, just not in the schedule disclosure. Version 1.0.5 patches the issue. |
| The DataPress (Dataverse Integration) WordPress plugin before 2.91 does not properly restrict access to its template rendering feature and exposes the viewing user's data to it, allowing users with a role as low as Contributor to disclose sensitive information, such as the session cookies of higher privileged users who view the affected content. |
| A flaw has been found in HKUDS nanobot up to 0.2.1. The impacted element is the function ExecTool._prepare_command of the file nanobot/agent/tools/shell.py of the component Login-shell Environment Handler. Executing a manipulation can lead to information disclosure. The attack requires local access. The exploit has been published and may be used. Upgrading to version 0.3.0 is sufficient to resolve this issue. This patch is called 4525. The affected component should be upgraded. Multiple issues were reported to the project. They reacted with a high level of professionalism and kindness: "The report concerns shell startup files reintroducing environment variables when command execution defaults to a login shell. The default was changed so exec does not use a login shell unless explicitly requested". |
| A vulnerability was determined in SourceCodester Online Clothing Store. Affected by this issue is some unknown functionality of the file /_notes/ of the component Dreamweaver Metadata Files. Executing a manipulation can lead to file and directory information exposure. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. |
| The Password Protected — Lock Entire Site, Pages, Posts, Categories, and Partial Content WordPress plugin before 2.8.4 does not restrict REST API access to authenticated users when a specific option is enabled, allowing unauthenticated visitors to bypass the sitewide password gate and read otherwise-protected content and account identifiers via the REST API. This re-introduces a previously-fixed issue (CVE-2024-0437), which was patched in 2.6.7 and regressed in 2.6.8. |
| OpenReception's appointment booking software provides an end-to-end encrypted appointment booking platform. Prior to version 1.0.2, the `GET /api/tenants/{id}` endpoint returns the full tenant record to any authenticated `TENANT_ADMIN` of that tenant, including the `databaseUrl` field. This field contains the live PostgreSQL connection string the application uses to connect to that tenant's database. In the tested official `docker-compose.prod.yml` deployment, the connection string contained the user `postgres` with `rolsuper=true` and the plaintext password from `secrets/postgres_password.txt`. Operators who configure a non-superuser PostgreSQL user via `secrets/postgres_user.txt` would expose a less privileged credential, but the disclosure of the connection string itself is independent of that choice. The same credential applies to every database managed by that PostgreSQL instance: the central `appointment_booking` database, every per-tenant database (one per tenant), and the postgres administrative database. A `TENANT_ADMIN` of one tenant who can reach `postgres:5432` (directly via internal network, indirectly via any SSRF, RCE, or file-read in the application) can read every other tenant's appointment ciphertexts, key shares, and metadata; read the central user table, including all `GLOBAL_ADMIN` accounts, password hashes, and session records; modify or delete any data in any tenant database; and/or i a superuser-scoped deployment: use PostgreSQL's `pg_read_server_files`, `COPY ... FROM PROGRAM`, and `CREATE EXTENSION` for further escalation inside the database container. This breaks the per-tenant database isolation that is otherwise the primary cross-tenant control in the application. The application code carefully scopes most queries to the calling tenant's database, but those scopings are irrelevant once the attacker holds the credentials that bypass the application entirely. Version 1.0.2 fixes the issue. |
