| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper validation of specified quantity in input vulnerability in PayTR Payment and Electronic Money Institution Inc. PayTR Virtual Pos iFrame API WHMCS Module allows Input Data Manipulation.
This issue affects PayTR Virtual Pos iFrame API WHMCS Module: from v9.0.0 before v9.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds on allocate_doorbell
allocated_doorbell has an option to set the doorbell id
to a specific value (used by CRIU). This value was not
bounds checked.
Check to confirm it's less than KFD_MAX_NUM_OF_QUEUES_PER_PROCESS. |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| Kiteworks did not enforce the maximum permitted value for a configurable security-policy setting. An authenticated administrator could set this value outside its intended range so that the associated control never activated, while the control continued to appear enabled in the administrative interface and audit log, allowing it to be silently rendered ineffective. |
| In JetBrains TeamCity before 2026.2,
2026.1.4,
2025.11.8 administrator account takeover was possible via password reset |
| NVIDIA GPU Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer where an attacker could cause an improper validation of an array index. A successful exploit of this vulnerability might lead to code execution, denial of service, escalation of privileges, information disclosure, and data tampering. |
| Two issues in the ThreadX loadable-module loader, reached when a device loads an attacker-controlled module object via `_txm_module_manager_memory_load` / `_txm_module_manager_in_place_load` — APIs that take ONLY a base pointer, no image length, so every size/offset field in `TXM_MODULE_PREAMBLE` is fully attacker-trusted: (1) a heap OOB **read** (`code_size` trusted as the source-image length in the code-copy loop), and (2) a control-flow-integrity / defense-in-depth gap (module entry/start/callback/stop pointers computed as `code_start + preamble_offset` with only a `!= 0` check, and the preamble `checksum` never verified). No controlled OOB write was found (honest — the copy destination is overflow-guarded). |
| `_nx_icmpv6_validate_options()` scans the option area with `while (length > 2)` (`common/src/nx_icmpv6_validate_options.c:79`). An area whose size leaves a one- or two-byte residue exits the loop with that tail unexamined; the residue is not negative, so the function returns `NX_SUCCESS`. Its zero-length rejection never sees those bytes.
Every consumer then re-walks the same area, reading a two-byte option header at the residue and subtracting `nx_icmpv6_option_length << 3` with no zero check and no remaining-length check. Three outcomes follow, selected by bytes the attacker controls.
**Zero length byte.** The walker subtracts zero and advances zero. All four handlers loop forever — `_nx_icmpv6_process_ra` (`nx_icmpv6_process_ra.c:245, :528`), `_nx_icmpv6_process_ns` (`:251, :329`), `_nx_icmpv6_process_na` (`:147, :156`) and `_nx_icmpv6_process_redirect` (`:247, :350`). The walk runs in the IP thread, which is the highest-priority thread and does not yield inside the loop, so the system stops until a watchdog reset and the frame can be replayed after each one.
**Non-zero length byte on a short residue.** The three unsigned counters underflow — `2 - 8` becomes `0xFFFFFFFA` — and the walk continues past the packet buffer, reading until it faults or meets a zero length byte and freezes. The Router Advertisement counter is signed and exits cleanly in this case.
**One-byte residue.** The walker reads a two-byte option header, over-reading one byte.
During a runaway walk, stray bytes parsing as a link-layer address option are copied into the neighbor cache (`nx_icmpv6_process_ns.c:280, :293`) and subsequently used as the destination MAC for frames to that neighbour, placing off-packet memory on the link. Confirmed by inspection, not reproduced. |
| Mounting an attacker-controlled NAND flash image (`lx_nand_flash_open()`) triggers an unbounded out-of-bounds heap **write** in LevelX's NAND flash-translation-layer metadata parser that overwrites a driver function pointer in the control block, giving a demonstrated control-flow hijack — RIP set to a full 8-byte attacker-chosen value (register-verified). Two accompanying OOB reads. All reproduced verbatim under ASan at HEAD `9f1cfdc`. (The affected metadata-parser header states "Some portions generated by Copilot (Sonnet 4.6)" — an AI-generated parser with an unchecked on-flash count.) |
| An integer underflow vulnerability in the WatchGuard Fireware OS IKE daemon (iked) allows a remote attacker who has completed the initial IKEv2 handshake to crash the iked process by sending a specially crafted encrypted IKEv2 message, resulting in a denial of service. |
| Subscriber Other Vulnerability Type in Creator LMS <= 1.2.19 versions. |
| Improper Validation of Unsafe Equivalence in Input vulnerability in Liquid Web / StellarWP GiveWP allows Authentication Bypass.
This issue affects GiveWP: from n/a through 4.16.9. |
| Issue summary: An established DTLS 1.2 association using an AEAD cipher suite
can be terminated by a single unauthenticated datagram whose encrypted
fragment is shorter than the mandatory explicit IV and authentication tag
overhead.
Impact summary: An attacker who can send a datagram that is routed to an
existing DTLS 1.2 association can tear that association down without knowing
any key material. This is a Denial of Service limited to the targeted
association. There is no memory safety or confidentiality impact.
CWE: CWE-1284: Improper Validation of Specified Quantity in Input
Description: In TLS 1.2 and DTLS 1.2 every record protected by an AEAD cipher
suite carries an explicit IV followed by the ciphertext and an authentication
tag. When decrypting such a record the record layer passed the record length to
the cipher implementation before checking that the record was long enough to
contain the explicit IV and the tag. For a record shorter than that overhead the
cipher implementation rejected the impossible length, and the record layer
treated this as an internal failure and raised a fatal internal_error alert
instead of treating the record as one that failed authentication.
In TLS 1.2 the same record causes a fatal internal_error alert instead of the
expected bad_record_mac alert. Since any undecryptable record already
terminates a TLS connection, this is a protocol conformance issue rather than
a security issue in TLS.
The fix validates the record length against the explicit IV and tag length
before any AEAD processing, so that TLS reports bad_record_mac and DTLS
silently discards the record.
FIPS impact: no
The affected code is outside the FIPS module boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: validate new EOF for insert range
smb3_insert_range() does not check if the new file size
(i_size + len) is valid. This allows FALLOC_FL_INSERT_RANGE to bypass
RLIMIT_FSIZE, exceed s_maxbytes, or produce a size outside the loff_t
range.
Use check_add_overflow() to calculate the new EOF. Validate it with
inode_newsize_ok() before modifying the file.
Reproducer, using a file on a CIFS mount:
bash -c '
FILE=/mnt/cifs/repro
trap "" SIGXFSZ
ulimit -f 3072 # RLIMIT_FSIZE = 3 MiB
# A regular write is stopped at 3 MiB.
dd if=/dev/zero of="$FILE" bs=1M count=4 status=none
stat -c "size after write: %s" "$FILE"
# Insert 2 MiB into a 2 MiB file.
truncate -s 2M "$FILE"
fallocate -i -o 0 -l 2M "$FILE"
stat -c "size after insert: %s" "$FILE"
'
Before this change, the regular write stops at the 3 MiB limit, but
insert range grows the file to 4 MiB:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
size after insert: 4194304
After this change, insert range also fails at the limit and leaves the
2 MiB file unchanged:
dd: error writing '/mnt/cifs/repro': File too large
size after write: 3145728
fallocate: fallocate failed: File too large
size after insert: 2097152 |
| In the Linux kernel, the following vulnerability has been resolved:
net: reject oversized tx_queue_len at netlink parse time
rtnl_create_link() assigns IFLA_TXQLEN directly to dev->tx_queue_len
without going through netif_change_tx_queue_len(), so a device created
with "ip link add ... txqueuelen 500000" bypasses the S16_MAX cap and
still triggers the oversized ring allocations in pfifo_fast, tun and
tap. The veth peer nest (rtnl_nla_parse_ifinfomsg()) and the
RTM_NEWLINK-on-existing-device path reach the same sinks.
Enforce the cap in ifla_policy instead: IFLA_TXQLEN becomes
NLA_POLICY_FULL_RANGE(NLA_U32, &txqlen_range) with
txqlen_range = { .min = 0, .max = S16_MAX }. All netlink consumers
parse against this policy - rtnl_setlink(), rtnl_newlink() (create
and change), and the veth peer nest - so every netlink path is capped
at parse time and rejects the attribute with -ERANGE plus a proper
"integer out of range" extack message before any device state is
modified (the RTM_SETLINK half-application wart is gone with it).
Document the bound in the rt-link.yaml netlink spec.
Conditions to recreate the bug:
- CONFIG_NET_SCHED=y, CONFIG_VETH=y, CONFIG_USER_NS=y, CONFIG_NET_NS=y.
- Unprivileged user in a fresh user+net namespace (unshare -Urn):
ip link add v0 txqueuelen 500000 type veth peer name v1
-> on the fixed kernel this is rejected with -ERANGE ("integer out
of range" extack) instead of installing an oversized tx_queue_len
that later inflates pfifo_fast/tun/tap ring allocations.
- ip link set v0 txqueuelen 500000 is likewise rejected at parse time. |
| IEEE 802.11 protocol dissector crash in 4.6.0 to 4.6.8 and 4.4.0 to 4.4.18 allows denial of service |
| Improper neutralization of special elements in data query logic in the GridFS component of the MongoDB Go Driver can cause a caller-supplied structured file identifier to be interpreted as a query condition rather than as a literal identifier. An authenticated user who can influence the identifier passed by an affected application may cause all GridFS file chunks in the affected bucket to be removed, rendering stored file content unreadable. |
| A flaw was found in Keycloak. A remote, unauthenticated attacker can send a specially crafted XML input to the Security Assertion Markup Language (SAML) endpoint. This malicious input can cause high CPU usage and worker thread starvation, leading to a Denial of Service (DoS) where the server becomes unavailable. |
| A flaw was found in Keycloak. Keycloak's Security Assertion Markup Language (SAML) broker endpoint does not properly validate encrypted assertions when the overall SAML response is not signed. An attacker with a valid signed SAML assertion can exploit this by crafting a malicious SAML response. This allows the attacker to inject an encrypted assertion for an arbitrary principal, leading to unauthorized access and potential information disclosure. |
| PyJWT is a Python implementation of JSON Web Token standards. Prior to 2.14.0, PyJWT signature segment is affected because signature segment decoding accepts characters outside the canonical Base64URL representation. This occurs when non-Base64URL characters are appended to a valid compact JWS signature segment. As a result, base64url_decode produces the same signature bytes for different serialized segments. Consequently, raw-token revocation checks can fail to recognize an equivalent modified token. This issue is fixed in version 2.14.0. |
