| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: fix out-of-bounds page array access on empty zisofs block
zisofs_uncompress_block()'s empty-block fast path returns
pcount << PAGE_SHIFT, ignoring the incoming poffset, unlike the
decompression path which returns bytes produced relative to poffset.
zisofs_fill_pages() uses that return to advance its page cursor, so when
the zisofs block size is below PAGE_SIZE and a sub-page block leaves
poffset partway into a page, a following empty block over-counts and
advances pages[] one element past its end, after which
"if (poffset && *pages)" reads pages[1] out of bounds. rock.c only
rejects a block-size shift > 17, so a crafted "ZF" Rock Ridge record can
set it below PAGE_SHIFT; the bug is reached by an ordinary read() of a
compressed file on such a mounted ISO9660 image.
Return the byte count relative to poffset and zero only
[poffset, PAGE_SIZE) of the first page, matching the decompression path.
The page-aligned case (poffset == 0) is unaffected.
BUG: KASAN: slab-out-of-bounds in zisofs_read_folio (fs/isofs/compress.c:290)
Read of size 8 at addr ffff88800f5eac48 by task exploit/142
zisofs_read_folio (fs/isofs/compress.c:290)
read_pages (mm/readahead.c:184)
...
filemap_read (mm/filemap.c:2814)
vfs_read (fs/read_write.c:574)
__x64_sys_pread64 (fs/read_write.c:769)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The buggy address is located 0 bytes to the right of the
allocated 8-byte region in the kmalloc-8 cache |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: reject restart table growth beyond U16_MAX entries
During $LogFile replay, log_replay() indexes the transaction table by the
transact_id taken from the log record header. check_log_rec() only
verifies that transact_id is non-zero and properly aligned, not its
magnitude, so a crafted image can request an arbitrarily large index.
alloc_rsttbl_from_idx() grows the table to cover that index via
extend_rsttbl(), which passes the new entry count to init_rsttbl():
rt = init_rsttbl(esize, used + add);
used + add is computed as u32 but init_rsttbl() takes a u16, and the
count is stored in struct RESTART_TABLE as a __le16. When used + add
exceeds U16_MAX it is truncated, init_rsttbl() allocates a table far
smaller than the index requires, and alloc_rsttbl_from_idx() then
dereferences and writes at the original, untruncated offset -- an
out-of-bounds access past the allocation, reachable by mounting a
crafted NTFS image.
BUG: KASAN: use-after-free in alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
Read of size 4 at addr ffff8880327ffff8 by task exploit
alloc_rsttbl_from_idx (fs/ntfs3/fslog.c:950)
log_replay (fs/ntfs3/fslog.c:4562)
ntfs_loadlog_and_replay (fs/ntfs3/fsntfs.c:324)
ntfs_fill_super (fs/ntfs3/super.c:1393)
get_tree_bdev_flags
vfs_get_tree
path_mount
__x64_sys_mount
A restart table is limited to U16_MAX entries by its __le16 count, so a
larger growth request is invalid input. Reject it in extend_rsttbl();
all callers already handle a NULL return. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/dmem: fix mismatched DMA unmap size for large folios
Device-private THP migration maps migration buffers with page_size()
and records that length in dma_info->size. For a compound folio
page_size() is PAGE_SIZE << order, but two teardown sites still pass a
literal PAGE_SIZE to dma_unmap_page():
- nouveau_dmem_migrate_to_ram() on the success path, and
- nouveau_dmem_migrate_copy_one() on the copy-error path.
For an order > 0 folio this unmaps less than was mapped, leaking the
remainder of the IOMMU/IOVA mapping. The other unmap sites, in
nouveau_dmem_migrate_chunk() and nouveau_dmem_evict_chunk(), already
use the saved size; use it here too. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix scope of mqd_mgr dereference in pqm_debugfs_mqds
Reading /sys/kernel/debug/kfd/mqds while a process holds an active KFD
queue triggers a NULL pointer dereference because the for loop that
calls mqd_mgr->debugfs_show_mqd() is incorrectly placed outside the
if (pqn->q) block that initializes mqd_mgr.
The queue list can contain entries where pqn->q is NULL (kernel queues
where only pqn->kq is valid). In the original code:
if (pqn->q) {
...
mqd_mgr = q->device->dqm->mqd_mgrs[mqd_type];
size = mqd_mgr->mqd_stride(...);
}
for (xcc = 0; xcc < num_xccs; xcc++) { // WRONG: outside if block
mqd = q->mqd + size * xcc;
r = mqd_mgr->debugfs_show_mqd(m, mqd);
}
When iterating over a queue node where pqn->q is NULL:
1. The if (pqn->q) block is skipped
2. mqd_mgr remains uninitialized (NULL from declaration)
3. The for loop executes anyway
4. mqd_mgr->debugfs_show_mqd(m, mqd) dereferences NULL
The crash manifests as:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor instruction fetch in kernel mode
RIP: 0010:0x0
Call Trace:
pqm_debugfs_mqds+0x10c/0x1d0 [amdgpu]
kfd_debugfs_mqds_by_process+0x9b/0x110 [amdgpu]
seq_read_iter+0x132/0x4b0
...
Fix by moving the for loop inside the if (pqn->q) block, so mqd_mgr
and related variables are only used when properly initialized.
(cherry picked from commit 8bfe29d5c798940f797aa24135d2734c3ffce9de) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: SCO: hold sk properly in sco_conn_ready
sk deref in sco_conn_ready must be done either under conn->lock, or
holding a refcount, to avoid concurrent close. conn->sk and parent sk is
currently accessed without either, and without checking parent->sk_state:
[Task 1] [Task 2]
sco_sock_release
sco_conn_ready
sk = conn->sk
lock_sock(sk)
conn->sk = NULL
lock_sock(sk)
release_sock(sk)
sco_sock_kill(sk)
UAF on sk deref
and similarly for access to sco_get_sock_listen() return value.
Fix possible UAF by holding sk refcount in sco_conn_ready() and making
sco_get_sock_listen() increase refcount. Also recheck after lock_sock
that the socket is still valid. Adjust conn->sk locking so it's
protected also by lock_sock() of the associated socket if any. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Handle negative S1 walk levels in VNCR TLB size evaluation
Computing the effects of a TLB invalidation involves looking at
the size of the mapping cached by the TLB. For S1 mappings such as
VNCR, this is deducted from the combination of the base granule size
and the mapping level.
However, this implies that the S1 MMU is *on*. When the MMU is off,
we indicate this with the level being set to a "creative" value of
-127 (S1_MMU_DISABLED).
This ends-up being misinterpreted by pgshift_level_to_ttl() as it
doesn't handle negative levels at all (the level is immediately cast
to a u8 and only the bottom two bits considered), leading to an
invalidation size of 0. Not helpful.
Tidy-up pgshift_level_to_ttl() to handle these negative levels, and
ttl_to_size() to always return SZ_1G when no valid TTL is present.
This allows the removal of open-coded checks for similar situations.
Note that the check for a negative value not explicitely checking for
S1_MMU_DISABLED is deliberate, so that actual negative levels introduced
with LVA2 and D128 can take the same path if we ever support them. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: clear vdev->msi_perm after freeing it on init failure
vfio_msi_cap_len() lazily allocates the per-device MSI permission table:
vdev->msi_perm = kmalloc_obj(struct perm_bits, GFP_KERNEL_ACCOUNT);
if (!vdev->msi_perm)
return -ENOMEM;
ret = init_pci_cap_msi_perm(vdev->msi_perm, len, flags);
if (ret) {
kfree(vdev->msi_perm);
return ret; /* vdev->msi_perm left dangling */
}
When init_pci_cap_msi_perm() -> alloc_perm_bits() fails with -ENOMEM, the
error path frees vdev->msi_perm but leaves the freed pointer stored in
it. vdev->msi_perm is not re-zeroed later because struct
vfio_pci_core_device is per-device and persists across open/close cycles,
and the vfio_config_init() error path returns without calling
vfio_config_free(). So the dangling pointer outlives the failed open.
That leads to two use-after-frees on the same device:
1. Reuse. The next vfio_config_init() sees the stale pointer at
"if (vdev->msi_perm) return len;" and reuses the freed object. MSI
config accesses in vfio_pci_config_rw_single() then dereference and
call the freed perm->readfn / perm->writefn function pointers.
2. Double free. A later vfio_config_free() runs free_perm_bits() and
kfree() on the already-freed object.
Fix it by NULLing vdev->msi_perm after the kfree(), matching the
NULL-after-free discipline already used in free_perm_bits() and
vfio_config_free().
BUG: KASAN: slab-use-after-free in vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
Read of size 8 at addr ffff88800fcc88d0 by task exploit/143
Call Trace:
...
kasan_report (mm/kasan/report.c:595)
vfio_pci_config_rw_single (drivers/vfio/pci/vfio_pci_config.c:1961)
vfio_pci_config_rw (drivers/vfio/pci/vfio_pci_config.c:1986)
vfio_pci_rw (drivers/vfio/pci/vfio_pci_core.c:1599)
vfs_read (fs/read_write.c:572)
__x64_sys_pread64 (fs/read_write.c:764)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Followed on device close by a double free of the same object:
Oops: general protection fault, probably for non-canonical address
0x1f63e0e8000008: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:kfree (mm/slub.c:6711)
Call Trace:
vfio_config_free (drivers/vfio/pci/vfio_pci_config.c:1861)
vfio_pci_core_disable (drivers/vfio/pci/vfio_pci_core.c:685)
vfio_pci_core_close_device (drivers/vfio/pci/vfio_pci_core.c:777)
vfio_df_close (drivers/vfio/vfio_main.c:602)
vfio_device_fops_release (drivers/vfio/vfio_main.c:648)
__fput (fs/file_table.c:512)
__x64_sys_close (fs/open.c:1496)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
...
Kernel panic - not syncing: Fatal exception |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: validate ef->size covers the record's name and value
When an EA record has a non-zero ef->size, ntfs_read_ea() only checks
that the record fits in the remaining buffer (ea_size > bytes), not that
ef->size is large enough to hold the record's own name_len + 1 + elength.
A crafted image can pass validation with, e.g., ef->size = 24 but
elength = 0xffff. ntfs_get_ea() then trusts elength and copies it out of
the undersized record, reading past the kmalloc(info->size) allocation
and leaking heap memory to userspace via getxattr():
BUG: KASAN: slab-out-of-bounds in ntfs_get_ea (fs/ntfs3/xattr.c:302)
Read of size 65535 at addr ffff888100794550 by task exploit
__asan_memcpy (mm/kasan/shadow.c:105)
ntfs_get_ea (fs/ntfs3/xattr.c:302)
ntfs_getxattr (fs/ntfs3/xattr.c:848)
__vfs_getxattr (fs/xattr.c:441)
vfs_getxattr (fs/xattr.c:474)
do_getxattr (fs/xattr.c:800)
path_getxattrat (fs/xattr.c:868)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
The buggy address is located 80 bytes inside of
allocated 84-byte region in cache kmalloc-96
Compute the size the record needs and require ef->size to cover it. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: fix out-of-bounds read in read_log_rec_buf()
read_log_rec_buf() copies a log record into a caller buffer starting at
u32 off = lsn_to_page_off(log, lsn) + log->record_header_len;
log->record_header_len (and log->data_off, used for the following pages)
comes verbatim from the on-disk restart area and is only checked for
8-byte alignment in is_rst_area_valid(), so off can exceed
log->page_size. "tail = log->page_size - off" then underflows and
memcpy() reads past the page_size-sized buffer returned by
read_log_page(), spilling adjacent slab memory into the replay buffer.
This is reachable by mounting a crafted NTFS image:
BUG: KASAN: slab-out-of-bounds in read_log_rec_buf+0x216/0x580
Read of size 64 at addr ffff88800a877ff8 by task exploit/127
read_log_rec_buf fs/ntfs3/fslog.c:2299
log_replay fs/ntfs3/fslog.c:4216
ntfs_loadlog_and_replay fs/ntfs3/fsntfs.c:324
ntfs_fill_super fs/ntfs3/super.c:1392
get_tree_bdev_flags fs/super.c:1694
__x64_sys_mount fs/namespace.c:4360
The buggy address is located 4088 bytes to the right of
the 4096-byte region [ffff88800a876000, ffff88800a877000)
Reject an in-page offset outside the current page before the copy.
[almaz.alexandrovich@paragon-software.com: replaced the >= sign with >] |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: Allow per function PCI slots to fix slot reset on s390
On s390 systems, which use a machine level hypervisor, PCI devices are
always accessed through a form of PCI pass-through which fundamentally
operates on a per PCI function granularity. This is also reflected in the
s390 PCI hotplug driver which creates hotplug slots for individual PCI
functions. Its reset_slot() function, which is a wrapper for
zpci_hot_reset_device(), thus also resets individual functions.
Currently, the pci_create_slot() assigns the same pci_slot object to
multifunction devices. This approach worked fine on s390 systems that only
exposed virtual functions as individual PCI domains to the operating
system. Since commit 44510d6fa0c0 ("s390/pci: Handling multifunctions")
s390 supports exposing the topology of multifunction PCI devices by
grouping them in a shared PCI domain. This creates a problem when resetting
a function through the hotplug driver's slot_reset() interface.
When attempting to reset a function through the hotplug driver, the shared
slot assignment causes the wrong function to be reset instead of the
intended one. It also leaks memory as we do create a pci_slot object for
the function, but don't correctly free it in pci_slot_release().
Add a flag for struct pci_slot to allow per function PCI slots for
functions managed through a hypervisor, which exposes individual PCI
functions while retaining the topology. Since we can use all 8 bits for
slot 'number' (for ARI devices), change slot 'number' u16 to account for
special values PCI_SLOT_PLACEHOLDER and PCI_SLOT_ALL_DEVICES. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sysfb: ofdrm: Fix integer overflow in fb_size calculation
The framebuffer size calculation `fb_size = linebytes * height` can
overflow when both values are large (e.g., 46341 * 46341 > INT_MAX).
Since linebytes and height are both int types, the multiplication is
performed as int * int, which results in undefined behavior on overflow.
Use check_mul_overflow() to detect and prevent this overflow, consistent
with the approach used in simpledrm.c and corebootdrm.c. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix out-of-bounds read in ext4_read_inline_dir()
ext4_read_inline_dir() can read a dirent header past the end of its inline
buffer, triggering a slab-out-of-bounds read during getdents64():
BUG: KASAN: slab-out-of-bounds in __ext4_check_dir_entry
Read of size 2 at addr ffff88800f3dd23c by task exploit/148
...
__ext4_check_dir_entry
ext4_read_inline_dir
iterate_dir
The dirent payload lives in a buffer of exactly inline_size bytes:
dir_buf = kmalloc(inline_size, GFP_NOFS);
but iteration runs in a position space extra_offset bytes larger
(extra_size = extra_offset + inline_size) so the synthetic "." and ".."
land at their block-dir offsets. A dirent is formed at "dir_buf + pos -
extra_offset", yet the ext4_check_dir_entry() length argument uses the
larger extra_size. A position whose dirent header would extend past
extra_size is therefore accepted, and the rescan loop's rec_len probe and
ext4_check_dir_entry() dereference de->rec_len before the entry is rejected.
Reject a position whose minimum-size dirent header would not fit within
extra_size before forming de, in both the rescan and main loops, and pass
inline_size rather than extra_size to ext4_check_dir_entry() so the length
check matches the physical buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix tree connection use-after-free in smb2_tree_connect()
ksmbd_tree_conn_connect() publishes a new tree connection in
sess->tree_conns with a single reference and returns its pointer to
smb2_tree_connect(). The handler continues to initialize the object and
build the response after publication. A concurrent session logoff can
erase the connection and drop that reference, freeing the object while
the handler still uses it.
BUG: KASAN: slab-use-after-free in smb2_tree_connect+0xe3d/0xf90
smb2_tree_connect (fs/smb/server/smb2pdu.c:2872)
handle_ksmbd_work
process_one_work
worker_thread
kthread
After xa_store() succeeds, take a second reference before releasing
tree_conns_lock. The original reference belongs to the xarray entry and
the second belongs to the creating smb2_tree_connect() handler.
Keep the references balanced in every path:
- On normal exit or an error after publication, smb2_tree_connect()
drops its creator reference. Error cleanup also calls
ksmbd_tree_conn_disconnect(), which drops the xarray reference only if
it removes the exact entry.
- SMB2 TREE_DISCONNECT uses the same helper to remove the entry and drop
its xarray reference. The request's existing lookup reference remains
owned by the request and is released by the existing cleanup.
- Session LOGOFF removes each entry and drops its xarray reference. If
it wins the race, later cleanup sees that the entry is gone and does
not drop that reference again.
To enforce this ownership, claim the disconnected state and erase the
exact entry atomically under tree_conns_lock. This guarantees one drop
for the xarray reference and one drop by each in-flight user, regardless
of which teardown path wins. If logoff removes the entry before
initialization completes, fail the connect instead of marking the
detached object TREE_CONNECTED. |
| In the Linux kernel, the following vulnerability has been resolved:
gtp: add synchronize_net() in gtp_newlink() error path to prevent use-after-free
gtp_newlink()'s error path frees tid_hash and addr_hash without
waiting for an RCU grace period after clearing sk_user_data. A
concurrent gtp_encap_recv() in softirq may still hold the gtp_dev
pointer obtained via rcu_dereference_sk_user_data() and access the
freed memory.
BUG: KASAN: slab-use-after-free in gtp0_pdp_find+0x1f6/0x200 (gtp.c:152)
Call Trace:
<IRQ>
gtp0_pdp_find+0x1f6/0x200
gtp_encap_recv+0x527/0x24b0
udp_queue_rcv_one_skb+0x75f/0xc10
Add synchronize_net() before the kfree calls in out_hashtable, which
covers all error paths from both gtp_encap_enable() and
gtp_create_sockets(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Drop tt->restore after successful restore
ttm_pool_restore_and_alloc() can successfully complete the restore
process via ttm_pool_restore_commit(), but tt->restore is not dropped
afterward. As a result, subsequent backup/restore flows observe what
appears to be a completed restore, while in reality shmem handles are
still installed in tt->pages, leading to the stack trace below.
Fix this by freeing and dropping tt->restore in
ttm_pool_restore_and_alloc() upon successful completion of the restore.
20545 [ 309.784531] RIP: 0010:sg_alloc_append_table_from_pages+0x38c/0x490
20547 [ 309.809570] RSP: 0018:ffffc9000623b838 EFLAGS: 00010206
20548 [ 309.814827] RAX: 0000000000001000 RBX: ffff88816e42a160 RCX: 0000000000000000
20549 [ 309.821986] RDX: 0000000000002000 RSI: 0000000000000003 RDI: 0000000000001000
20550 [ 309.829147] RBP: ffff88816e42a168 R08: 0000000000000002 R09: 000000007ffff000
20551 [ 309.836310] R10: ffffc9000623b928 R11: 0000000000000000 R12: 000000007ffff000
20552 [ 309.843471] R13: ffff88815ba5a100 R14: 0000000000000000 R15: 0000000000000001
20553 [ 309.850634] FS: 00007f9ff305e700(0000) GS:ffff888276c94000(0000) knlGS:0000000000000000
20554 [ 309.858749] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
20555 [ 309.864519] CR2: 00007f9fca701000 CR3: 00000001565e2005 CR4: 0000000008f70ef0
20556 [ 309.871678] PKRU: 55555558
20557 [ 309.874403] Call Trace:
20558 [ 309.876866] <TASK>
20559 [ 309.878988] sg_alloc_table_from_pages_segment+0x60/0x100
20560 [ 309.884415] ? ttm_resource_manager_usage+0x36/0x60 [ttm]
20561 [ 309.889845] ? xe_tt_map_sg+0x7d/0xd0 [xe]
20562 [ 309.894045] xe_tt_map_sg+0x7d/0xd0 [xe]
20563 [ 309.898037] xe_bo_move+0x927/0xaa0 [xe]
20564 [ 309.902029] ttm_bo_handle_move_mem+0xba/0x170 [ttm]
20565 [ 309.907022] ttm_bo_validate+0xbe/0x190 [ttm]
20566 [ 309.911405] xe_bo_validate+0x9a/0x120 [xe]
20567 [ 309.915663] xe_gpuvm_validate+0xd9/0x140 [xe]
20568 [ 309.920206] drm_gpuvm_validate+0x2f0/0x5b0 [drm_gpuvm]
20569 [ 309.925459] ? drm_exec_lock_obj+0x63/0x210 [drm_exec]
20570 [ 309.930627] xe_vm_validate_rebind+0x46/0xb0 [xe]
20571 [ 309.935428] xe_exec_fn+0x20/0x40 [xe]
20572 [ 309.939249] drm_gpuvm_exec_lock+0x78/0xc0 [drm_gpuvm]
20573 [ 309.944410] xe_validation_exec_lock+0x5a/0xa0 [xe]
20574 [ 309.949385] xe_exec_ioctl+0x806/0xc30 [xe]
20575 [ 309.953639] ? ttwu_queue_wakelist+0xd9/0xf0
20576 [ 309.957935] ? __pfx_xe_exec_fn+0x10/0x10 [xe]
20577 [ 309.962449] ? __wake_up_common+0x73/0xa0
20578 [ 309.966482] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20579 [ 309.971263] drm_ioctl_kernel+0xa3/0x100
20580 [ 309.975209] drm_ioctl+0x213/0x440
20581 [ 309.978637] ? __pfx_xe_exec_ioctl+0x10/0x10 [xe]
20582 [ 309.983415] xe_drm_ioctl+0x67/0xd0 [xe]
20583 [ 309.987408] __x64_sys_ioctl+0x7f/0xd0 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: prevent out-of-bounds reads in share config responses
Validate IPC share configuration payload sizes before consuming
variable-length fields. Bound veto list parsing and account for
the separator byte when deriving the path length. |
| In the Linux kernel, the following vulnerability has been resolved:
ublk: clear VM_MAYWRITE on read-only ublk char device mmap
ublk_ch_mmap() rejects mmap requests with VM_WRITE set, but never
clears VM_MAYWRITE on the resulting read-only mapping. This allows
a userspace daemon to mmap the per-queue command buffer PROT_READ,
then upgrade it to PROT_WRITE via mprotect(), since VM_MAYWRITE was
never cleared.
The command buffer holds struct ublksrv_io_desc entries that are
kernel-written ABI; a writable mapping lets an unprivileged daemon
process corrupt fields such as addr, op_flags, nr_sectors, and
start_sector.
Same bug class as the drm/panthor and drm/vc4 VM_MAYWRITE fixes, and
the 2026-08-13 ptp/vmclock fix (a5edadbae57e).
Verified via mprotect() PoC: before the fix, a PROT_READ mapping can
be upgraded to PROT_READ|PROT_WRITE and a write into the command
buffer corrupts io_desc fields (confirmed under KASAN). After the
fix, mprotect() returns -EACCES. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: zero pipe read compound padding
Compound response handling extends the last response iov to an eight-byte
boundary.
smb2_read_pipe() allocates only the payload size, so the alignment padding
can expose up to seven bytes of uninitialized kernel heap memory.
Allocate the aligned size and clear the unused tail before pinning the
response buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable preemption in bpf_get_stackid
The get_perf_callchain call needs disabled preemption plus we need
it disabled as long as we access its returned trace entries buffer.
Note the bpf_get_stackid_pe function is executed already with
preemption disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: force complete the MES ring fences on reset
The MES scheduler ring has no drm scheduler (no_scheduler = true), so it is
skipped by the force-completion loop in amdgpu_device_pre_asic_reset(). It uses
a polling fence whose hw value lives in wb (GTT) memory and survives a MODE1
reset, while fence_drv.sync_seq keeps advancing for every packet.
When the reset is triggered because MES itself stopped responding, the
timed-out packets advance sync_seq past the last hw fence value MES wrote.
After resume the first MES submission polls forever on a seq that is never
written back, failing the resume and wedging the box on a second reset:
amdgpu: MES ring buffer is full.
amdgpu: *ERROR* ring gfx_0.0.0 test failed (-110)
amdgpu: resume of IP block <gfx_v11_0> failed -110
amdgpu: GPU reset end with ret = -110
Force complete the MES scheduler ring fences together with the scheduler rings
so their hw fence is realigned to sync_seq.
v2: cover all XCCs (one scheduler ring each), not just mes.ring[0]. |
