| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in geelen mcp-remote 0.1.32 through 0.1.38 allows a remote attacker to obtain sensitive information via the src/lib/authorization-server-metadata.ts, src/lib/utils.ts components |
| An issue in geelen mcp-remote 0.1.16 through 0.1.38 allows a remote attacker to execute arbitrary code via the src/lib/utils.ts and the getServerUrlHash function |
| An issue in geelen mcp-remote 0.1.16 through 0.1.38 allows a remote attacker to execute arbitrary code via the open() functions |
| simdjson 4.6.1 contains a one-byte out-of-bounds read vulnerability in dom::parser::parse_unpadded(). A specially crafted truncated JSON document whose final structural token closes a nested array or object can cause json_iterator::walk_document() to access buf[len] after the input buffer has been exhausted. This results in a heap out-of-bounds read and may cause application termination, leading to denial of service. |
| MuJS e892c9fdb contains an incorrect numeric conversion vulnerability in jsR_isindex() in jsrun.c. A specially crafted JavaScript input containing an excessively large numeric array index can cause an out-of-range floating-point value to be converted to an integer without proper range validation. This results in undefined behavior and can cause process termination, leading to denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: cfg80211: validate assoc response length before status and IE access
cfg80211_rx_assoc_resp() initialises the status and response-IE fields
of cfg80211_connect_resp_params from the management frame before
proving that the frame is long enough for those offsets. S1G and
regular association responses also have different IE offsets, but the
S1G path only patched resp_ie after the unsafe initialiser had already
run.
Defer resp_ie, resp_ie_len, and status to after the link-iteration
loop. Use a bool to remember whether the frame is S1G, then validate
the appropriate minimum length and set all three fields in a single
if/else block. Funnel short-frame and SME-reject cleanup through a
shared free_bss label for the abandon paths. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double fput
Fix a double fput() in error handling in cachefiles_create_tmpfile(). |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in nsvg__pathArcTo() when parsing SVG arc commands. A specially crafted SVG document containing extreme arc radius values can cause intermediate arc calculations to produce a NaN delta angle. The function subsequently converts this NaN value to int without validating that it is finite and representable, resulting in undefined behavior and process termination, leading to denial of service. |
| NanoSVG commit 239e102ec contains an incorrect numeric conversion vulnerability in the rasterizer's nsvg__addActive() function. A specially crafted SVG document containing sufficiently large geometry coordinates can cause fixed-point-scaled edge coordinates to exceed the range representable by int. The rasterizer subsequently converts these values to int without range validation, resulting in undefined behavior and possible process termination, leading to denial of service. |
| Bento4 1.6.0.0 contains an integer underflow vulnerability in AP4_AvccAtom::Create() and AP4_HvccAtom::Create(). A specially crafted MP4 file containing an avcC or hvcC atom with a declared size smaller than the atom header size can cause the payload-size calculation to wrap to a large unsigned value. The resulting invalid buffer allocation and copy operations can cause application termination, leading to denial of service. |
| Bento4 1.6.0.0 contains an integer underflow vulnerability in the avcC and hvcC configuration atom parsers. A specially crafted MP4 file containing an atom with a declared size smaller than AP4_ATOM_HEADER_SIZE can cause AP4_AvccAtom::Create() or AP4_HvccAtom::Create() to underflow the payload-size calculation. The resulting oversized buffer operation can cause invalid or NULL pointers to be passed to the AP4_DataBuffer copy path, resulting in application termination and denial of service. |
| Mini-XML 4.0.5 contains a memory leak vulnerability in mxml_load_data() during malformed XML parsing. Specially crafted XML input can cause text nodes allocated by mxmlNewText() to become unlinked before a parse error transfers control to the cleanup path. These orphaned nodes are not released, resulting in a persistent memory leak on each parsing attempt. Repeated attacker-controlled requests can cause cumulative memory exhaustion and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/proc: Use file_ns_capable() when checking config space read access
proc_bus_pci_read() decides how much of the config space is readable based
on capable(CAP_SYS_ADMIN), which checks the credentials of the task calling
read(), not the credentials of the process that opened the file.
The sysfs equivalent, pci_read_config(), has checked the credentials of the
opening process since commit de139a339395 ("pci: check caps from sysfs file
open to read device dependent config space"), so a privileged process can
open the config space file and pass the file descriptor to an unprivileged
process (for example, a process running a KVM guest with an assigned
device), which can then read the entire config space. The check was
subsequently routed through the LSM framework in commit 47970b1b2aa6 ("pci:
use security_capable() when checking capablities during config space read")
and converted to the dedicated helper in commit ab0fa82b2df9 ("pci-sysfs:
use proper file capability helper function").
Thus, the two interfaces check the same capability against different
credentials. Checking the credentials of the task calling read() makes the
outcome depend on who reads rather than who opened, so the restriction is
bypassed whenever a more privileged process reads through the descriptor.
Checking the credentials recorded in file->f_cred settles the decision at
open() time and ties it to the file, where it cannot change with the
caller.
Use file_ns_capable() to check CAP_SYS_ADMIN against the credentials in
effect when the file was opened, bringing the procfs interface in line with
the sysfs behaviour.
As a result, a file descriptor opened by a privileged process and passed to
an unprivileged one now allows the entire config space to be read through
procfs, matching sysfs. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: fsl-imx8mq-usb: fix typec switch leak on probe error path
If probe fails after imx95_usb_phy_get_tca() succeeds, the typec
switch leaks because the only cleanup path was in .remove(), which
never runs on probe failure.
Use devm_add_action_or_reset() so the switch is cleaned up on both
probe failure and driver removal. The imx95_usb_phy_put_tca() is no
longer needed, it will be removed in .remove() too. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: validate handler object type in two places
ACPICA: validate handler object type in acpi_ev_has_default_handler()
and acpi_ev_find_region_handler(). |
| In the Linux kernel, the following vulnerability has been resolved:
media: rkvdec: bound HEVC tile loops and PPS id to the array capacity
compute_tiles_uniform() and compute_tiles_non_uniform() loop over
num_tile_columns_minus1 + 1 / num_tile_rows_minus1 + 1 entries, and
assemble_hw_pps() writes one COLUMN_WIDTH / ROW_HEIGHT register per tile
and indexes priv_tbl->param_set[] by pic_parameter_set_id, all taken from
the untrusted PPS. Use the bounded v4l2_hevc_pps_num_tile_columns() /
v4l2_hevc_pps_num_tile_rows() helpers for the tile loops, and bail out of
assemble_hw_pps() before indexing priv_tbl->param_set[] with an
out-of-range pic_parameter_set_id, so the writes stay within the hardware
tables. |
| The Automatic.css plugin for WordPress is vulnerable to Stored Cross-Site Scripting via REQUEST_URI in all version 4.0.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that will execute whenever an administrator accesses the Activity Log settings page. |
| OpenClaw versions 2026.5.1 through 2026.7.0 fail to apply the configured exec approval path to Google Meet node commands. The googlemeet.chrome command accepts caller-supplied audio command arrays and executes them on a paired node without going through the normal system.run approval flow. In deployments with the Google Meet plugin enabled, a paired Chrome node, and the googlemeet.chrome node command allowed, a tool-enabled agent able to invoke that command can execute attacker-selected processes on the paired node, impacting files, credentials, browser profiles, and availability on that node. The issue is fixed in 2026.7.1; as a workaround, remove googlemeet.chrome from allowed node commands or disable the Google Meet plugin. |
| OpenClaw (npm package openclaw) before 2026.7.1 incorrectly binds Signal approval reactions. In affected versions, a reaction intended to resolve a structured approval request could instead attach to ordinary outbound text when unrelated outbound messages and a pending approval are present in the same conversation. As a result, an approver's reaction to unrelated text could be interpreted as approving or denying a pending host action; the practical impact depends on the pending request, conversation timing, and the actions available to the OpenClaw process. The issue does not change the authority of correctly identified approvers. This is fixed in version 2026.7.1. |
| OpenClaw (npm package 'openclaw') before 2026.7.1 is vulnerable to a time-of-check time-of-use race condition in OpenShell local mirror filesystem mutation operations. The remove, mkdir, and rename operations could act on a different filesystem target after OpenClaw completed its sandbox path-safety check, if the path is changed concurrently. An attacker able to win the race can cause a sandboxed operation to delete, create, or rename a host path outside the intended mirror root with the permissions of the OpenClaw process user. This does not require an operator to have granted host filesystem access outside the sandbox. The issue is fixed in 2026.7.1. |
