| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Issue summary: Applications using AES-CFB128 encryption or decryption on
systems with AVX-512 and VAES support can trigger an out-of-bounds read
of up to 15 bytes when processing partial cipher blocks.
Impact summary: This out-of-bounds read may trigger a crash which leads to
Denial of Service for an application if the input buffer ends at a memory
page boundary and the following page is unmapped. There is no information
disclosure as the over-read bytes are not written to output.
The vulnerable code path is only reached when processing partial blocks
(when a previous call left an incomplete block and the current call provides
fewer bytes than needed to complete it). Additionally, the input buffer
must be positioned at a page boundary with the following page unmapped.
CFB mode is not used in TLS/DTLS protocols, which use CBC, GCM, CCM, or
ChaCha20-Poly1305 instead. For these reasons the issue was assessed as
Low severity according to our Security Policy.
Only x86-64 systems with AVX-512 and VAES instruction support are affected.
Other architectures and systems without VAES support use different code
paths that are not affected.
OpenSSL FIPS module in 3.6 version is affected by this issue. |
| Issue summary: When a delta CRL that contains a Delta CRL Indicator extension
is processed a NULL pointer dereference might happen if the required CRL
Number extension is missing.
Impact summary: A NULL pointer dereference can trigger a crash which
leads to a Denial of Service for an application.
When CRL processing and delta CRL processing is enabled during X.509
certificate verification, the delta CRL processing does not check
whether the CRL Number extension is NULL before dereferencing it.
When a malformed delta CRL file is being processed, this parameter
can be NULL, causing a NULL pointer dereference.
Exploiting this issue requires the X509_V_FLAG_USE_DELTAS flag to be enabled in
the verification context, the certificate being verified to contain a
freshestCRL extension or the base CRL to have the EXFLAG_FRESHEST flag set, and
an attacker to provide a malformed CRL to an application that processes it.
The vulnerability is limited to Denial of Service and cannot be escalated to
achieve code execution or memory disclosure. For that reason the issue was
assessed as Low severity according to our Security Policy.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this issue,
as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: During processing of a crafted CMS EnvelopedData message
with KeyAgreeRecipientInfo a NULL pointer dereference can happen.
Impact summary: Applications that process attacker-controlled CMS data may
crash before authentication or cryptographic operations occur resulting in
Denial of Service.
When a CMS EnvelopedData message that uses KeyAgreeRecipientInfo is
processed, the optional parameters field of KeyEncryptionAlgorithmIdentifier
is examined without checking for its presence. This results in a NULL
pointer dereference if the field is missing.
Applications and services that call CMS_decrypt() on untrusted input
(e.g., S/MIME processing or CMS-based protocols) are vulnerable.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: During processing of a crafted CMS EnvelopedData message
with KeyTransportRecipientInfo a NULL pointer dereference can happen.
Impact summary: Applications that process attacker-controlled CMS data may
crash before authentication or cryptographic operations occur resulting in
Denial of Service.
When a CMS EnvelopedData message that uses KeyTransportRecipientInfo with
RSA-OAEP encryption is processed, the optional parameters field of
RSA-OAEP SourceFunc algorithm identifier is examined without checking
for its presence. This results in a NULL pointer dereference if the field
is missing.
Applications and services that call CMS_decrypt() on untrusted input
(e.g., S/MIME processing or CMS-based protocols) are vulnerable.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: Applications using RSASVE key encapsulation to establish
a secret encryption key can send contents of an uninitialized memory buffer to
a malicious peer.
Impact summary: The uninitialized buffer might contain sensitive data from the
previous execution of the application process which leads to sensitive data
leakage to an attacker.
RSA_public_encrypt() returns the number of bytes written on success and -1
on error. The affected code tests only whether the return value is non-zero.
As a result, if RSA encryption fails, encapsulation can still return success to
the caller, set the output lengths, and leave the caller to use the contents of
the ciphertext buffer as if a valid KEM ciphertext had been produced.
If applications use EVP_PKEY_encapsulate() with RSA/RSASVE on an
attacker-supplied invalid RSA public key without first validating that key,
then this may cause stale or uninitialized contents of the caller-provided
ciphertext buffer to be disclosed to the attacker in place of the KEM
ciphertext.
As a workaround calling EVP_PKEY_public_check() or
EVP_PKEY_public_check_quick() before EVP_PKEY_encapsulate() will mitigate
the issue.
The FIPS modules in 3.6, 3.5, 3.4, 3.3, 3.1 and 3.0 are affected by this issue. |
| Issue summary: Converting an excessively large OCTET STRING value to
a hexadecimal string leads to a heap buffer overflow on 32 bit platforms.
Impact summary: A heap buffer overflow may lead to a crash or possibly
an attacker controlled code execution or other undefined behavior.
If an attacker can supply a crafted X.509 certificate with an excessively
large OCTET STRING value in extensions such as the Subject Key Identifier
(SKID) or Authority Key Identifier (AKID) which are being converted to hex,
the size of the buffer needed for the result is calculated as multiplication
of the input length by 3. On 32 bit platforms, this multiplication may overflow
resulting in the allocation of a smaller buffer and a heap buffer overflow.
Applications and services that print or log contents of untrusted X.509
certificates are vulnerable to this issue. As the certificates would have
to have sizes of over 1 Gigabyte, printing or logging such certificates
is a fairly unlikely operation and only 32 bit platforms are affected,
this issue was assigned Low severity.
The FIPS modules in 3.6, 3.5, 3.4, 3.3 and 3.0 are not affected by this
issue, as the affected code is outside the OpenSSL FIPS module boundary. |
| Issue summary: An uncommon configuration of clients performing DANE TLSA-based
server authentication, when paired with uncommon server DANE TLSA records, may
result in a use-after-free and/or double-free on the client side.
Impact summary: A use after free can have a range of potential consequences
such as the corruption of valid data, crashes or execution of arbitrary code.
However, the issue only affects clients that make use of TLSA records with both
the PKIX-TA(0/PKIX-EE(1) certificate usages and the DANE-TA(2) certificate
usage.
By far the most common deployment of DANE is in SMTP MTAs for which RFC7672
recommends that clients treat as 'unusable' any TLSA records that have the PKIX
certificate usages. These SMTP (or other similar) clients are not vulnerable
to this issue. Conversely, any clients that support only the PKIX usages, and
ignore the DANE-TA(2) usage are also not vulnerable.
The client would also need to be communicating with a server that publishes a
TLSA RRset with both types of TLSA records.
No FIPS modules are affected by this issue, the problem code is outside the
FIPS module boundary. |
| mutt_ssl.c in mutt 1.5.16 and other versions before 1.5.19, when OpenSSL is used, does not verify the domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof SSL servers via an arbitrary valid certificate. |
| The CMS_verify function in OpenSSL 0.9.8h through 0.9.8j, when CMS is enabled, does not properly handle errors associated with malformed signed attributes, which allows remote attackers to repudiate a signature that originally appeared to be valid but was actually invalid. |
| Multiple memory leaks in the dtls1_process_out_of_seq_message function in ssl/d1_both.c in OpenSSL 0.9.8k and earlier 0.9.8 versions allow remote attackers to cause a denial of service (memory consumption) via DTLS records that (1) are duplicates or (2) have sequence numbers much greater than current sequence numbers, aka "DTLS fragment handling memory leak." |
| Double free vulnerability in OpenSSL 0.9.8f and 0.9.8g, when the TLS server name extensions are enabled, allows remote attackers to cause a denial of service (crash) via a malformed Client Hello packet. NOTE: some of these details are obtained from third party information. |
| OpenSSL 0.9.7 before 0.9.7l, 0.9.8 before 0.9.8d, and earlier versions allows attackers to cause a denial of service (CPU consumption) via parasitic public keys with large (1) "public exponent" or (2) "public modulus" values in X.509 certificates that require extra time to process when using RSA signature verification. |
| Memory leak in the zlib_stateful_init function in crypto/comp/c_zlib.c in libssl in OpenSSL 0.9.8f through 0.9.8h allows remote attackers to cause a denial of service (memory consumption) via multiple calls, as demonstrated by initial SSL client handshakes to the Apache HTTP Server mod_ssl that specify a compression algorithm. |
| The dtls1_retrieve_buffered_fragment function in ssl/d1_both.c in OpenSSL before 1.0.0 Beta 2 allows remote attackers to cause a denial of service (NULL pointer dereference and daemon crash) via an out-of-sequence DTLS handshake message, related to a "fragment bug." |
| OpenSSL 0.9.7 before 0.9.7l and 0.9.8 before 0.9.8d allows remote attackers to cause a denial of service (infinite loop and memory consumption) via malformed ASN.1 structures that trigger an improperly handled error condition. |
| mutt_ssl.c in mutt 1.5.19 and 1.5.20, when OpenSSL is used, does not properly handle a '\0' character in a domain name in the subject's Common Name (CN) field of an X.509 certificate, which allows man-in-the-middle attackers to spoof arbitrary SSL servers via a crafted certificate issued by a legitimate Certification Authority, a related issue to CVE-2009-2408. |
| The ASN1_STRING_print_ex function in OpenSSL before 0.9.8k allows remote attackers to cause a denial of service (invalid memory access and application crash) via vectors that trigger printing of a (1) BMPString or (2) UniversalString with an invalid encoded length. |
| The get_server_hello function in the SSLv2 client code in OpenSSL 0.9.7 before 0.9.7l, 0.9.8 before 0.9.8d, and earlier versions allows remote servers to cause a denial of service (client crash) via unknown vectors that trigger a null pointer dereference. |
| The TLS protocol, and the SSL protocol 3.0 and possibly earlier, as used in Microsoft Internet Information Services (IIS) 7.0, mod_ssl in the Apache HTTP Server 2.2.14 and earlier, OpenSSL before 0.9.8l, GnuTLS 2.8.5 and earlier, Mozilla Network Security Services (NSS) 3.12.4 and earlier, multiple Cisco products, and other products, does not properly associate renegotiation handshakes with an existing connection, which allows man-in-the-middle attackers to insert data into HTTPS sessions, and possibly other types of sessions protected by TLS or SSL, by sending an unauthenticated request that is processed retroactively by a server in a post-renegotiation context, related to a "plaintext injection" attack, aka the "Project Mogul" issue. |
| The dtls1_buffer_record function in ssl/d1_pkt.c in OpenSSL 0.9.8k and earlier 0.9.8 versions allows remote attackers to cause a denial of service (memory consumption) via a large series of "future epoch" DTLS records that are buffered in a queue, aka "DTLS record buffer limitation bug." |
