| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: track the connection owning a byte-range lock
SMB2_LOCK adds each granted byte-range lock to both the file lock list
and the lock list of the connection which handled the request. The
final close and durable handle paths, however, remove the connection
list entry while holding fp->conn->llist_lock.
With SMB3 multichannel, the connection handling the LOCK request can be
different from the connection which opened the file. The entry can
therefore be removed under a different spinlock from the one protecting
the list it belongs to. A concurrent traversal can then access freed
struct ksmbd_lock and struct file_lock objects.
Record the connection owning each lock's clist entry and hold a
reference to it while the entry is linked. Use that connection and its
llist_lock for unlock, rollback, close, and durable preserve. Durable
reconnect assigns the new connection as the owner when publishing the
locks again. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/io-wq: re-check IO_WQ_BIT_EXIT for each linked work item
commit 10dc95939817 ("io_uring/io-wq: check IO_WQ_BIT_EXIT inside work
run loop") fixed the obvious case where io_worker_handle_work() took one
exit-bit snapshot before draining pending work, but the fix stops one
level too early.
io_worker_handle_work() now re-checks IO_WQ_BIT_EXIT in its outer work
run loop, yet it still snapshots that bit once before processing a whole
dependent linked-work chain. If io_wq_exit_start() sets IO_WQ_BIT_EXIT
after the first linked item has started, the remaining linked items can
still reuse stale do_kill = false, skip IO_WQ_WORK_CANCEL, and continue
running after exit has begun.
Move the check further inside, so it covers linked items too. Note: this
is a syzbot special as it loves setting up tons of slow linked work on
weird devices like msr that take forever to read, and immediately close
the ring. Exit then takes a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: altera: Fix resource leaks on probe failure
The chained IRQ handler is set during probe, but is only removed during the
driver remove(). If pci_host_probe() fails, the handler and INTx IRQ
domain remain set even though the devm-managed host bridge storage
containing struct altera_pcie will be released, leaving the handler with
a stale data pointer.
Interrupts are also enabled before pci_host_probe() is called. If probe
fails after that point, the controller interrupt source should be disabled
before the chained handler and INTx domain are removed.
So set the chained handler only after the INTx domain has been created.
Disable controller interrupts during IRQ teardown, and tear the IRQ setup
down if pci_host_probe() fails.
[mani: commit log] |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: avoid kobject path lookup in DualSense match
The DualSense jack-detection input handler verifies that a matching input
device belongs to the same physical controller by building kobject path
strings for both the input device and the USB audio device, then comparing
the path prefix.
This was observed when a weak physical connection caused the controller
to rapidly disconnect and reconnect. During that repeated hotplug,
snd_dualsense_ih_match() can run while the controller's USB device is
being disconnected. kobject_get_path() walks ancestor kobjects and
dereferences their names; if the USB device kobject name is no longer
valid, this can fault in strlen():
RIP: 0010:strlen+0x10/0x30
Call Trace:
kobject_get_path+0x34/0x150
snd_dualsense_ih_match+0x49/0xd0 [snd_usb_audio]
input_register_device+0x566/0x6a0
ps_probe+0xb89/0x1590 [hid_playstation]
The same ownership check can be done without building kobject path
strings. The input device is parented below the HID device, USB interface
and USB device, so walking the input device parent chain and comparing
against the mixer USB device preserves the check without dereferencing
kobject names during disconnect. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally recompute CR8 intercept on PPR update
The TPR_THRESHOLD field in the VMCS is used by VMX to induce VM exits
when the guest's virtual TPR falls under the specified threshold,
allowing KVM to inject previously masked interrupts.
KVM handles these VM exits in handle_tpr_below_threshold().
Commit eb90f3417a0c ("KVM: vmx: speed up TPR below threshold vmexits")
optimized this function by calling apic_update_ppr() instead of raising
KVM_REQ_EVENT. apic_update_ppr() then raises KVM_REQ_EVENT if there is
a pending, deliverable interrupt.
However, if there are no new interrupts pending, apic_update_ppr() does
not issue the request. Thus, kvm_lapic_update_cr8_intercept() and
vmx_update_cr8_intercept() are not called before VM entry, which results
in a high, stale TPR_THRESHOLD. This is problematic due to the following
sentence in 28.2.1.1 "VM-Execution Control Fields" in the SDM:
The following check is performed if the “use TPR shadow” VM-execution
control is 1 and the “virtualize APIC accesses” and “virtual-interrupt
delivery” VM-execution controls are both 0: the value of bits 3:0 of
the TPR threshold VM-execution control field should not be greater
than the value of bits 7:4 of VTPR.
This error condition is typically not observed when KVM runs on a bare
metal system because modern processors support APICv, which enables
virtual-interrupt delivery, and which KVM uses when possible. This
causes the processor to no longer generate TPR-below-threshold exits
and to no longer check TPR_THRESHOLD on entry. However, when running
on older platforms, or under nested virtualization on a hypervisor that
does not support virtual-interrupt delivery and enforces this check
(like Hyper-V) this can cause a VM entry failure with hardware error
0x7, as seen in [1].
Call kvm_lapic_update_cr8_intercept() if apic_update_ppr() does not
find a deliverable interrupt (and thus does not raise KVM_REQ_EVENT).
Remove calls to kvm_lapic_update_cr8_intercept() on paths that end up in
apic_update_ppr(), as they now become redundant. This ensures that any
path that updates the guest's PPR also figures out if KVM needs to wait
for a TPR change (using TPR_THRESHOLD on VMX or CR8 intercepts on SVM). |
| A buffer overflow issue was addressed with improved memory handling. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6. Processing a 3D model may result in disclosure of process memory. |
| An inconsistent user interface issue was addressed with improved state management. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. A remote attacker may be able to bypass network filters. |
| The issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8. Processing a maliciously crafted asset catalog may result in disclosure of process memory. |
| A type confusion issue was addressed with improved memory handling. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to cause unexpected system termination. |
| This issue was addressed with improved handling of symlinks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to modify protected parts of the file system. |
| open62541 1.5.5 contains a heap-based buffer overflow in the default HistoryRead path when the default history database is used with the memory backend. |
| OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the construct_uri() function concatenates multiple URI components (protocol, username, domain, port, params) into a fixed 1024-byte global BSS buffer without any bounds checking. When a routing script calls construct_uri() with an attacker-controlled username, a combined component length exceeding 1024 bytes overflows the buffer, corrupting adjacent global data with attacker-controlled content. The overflow reaches disable_503_translation, a global flag controlling SIP 503 response handling, allowing an attacker to deterministically set the flag via the URI username and alter the server's routing behavior for subsequent messages. Because the same buffer is shared with contact_builder(), the overflow also corrupts that function's data, and without a memory sanitizer the adjacent globals are silently overwritten on every request containing a long username. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1. |
| OpenSIPS is a Session Initiation Protocol (SIP) server implementation. In versions prior to 3.6.6 and 4.0.0-rc1, the find_line_delimiter() function in the multipart body parser performs an out-of-bounds read via strncmp() when searching for MIME boundary delimiters. After finding a -- pattern near the end of the body, the function compares delimiter.len bytes (typically 20-70) starting from a position at or past the logical end of the body buffer, reading past the body boundary. The bug triggers when a SIP message has Content-Type: multipart/mixed with a boundary parameter and its body contains -- within two to three bytes of the body's end without being followed by the actual boundary delimiter. This issue has been fixed in versions 3.6.6 and 4.0.0-rc1. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/hyperv: validate resolution_count and fix WIN8 fallback
A SYNTHVID_RESOLUTION_RESPONSE with resolution_count > 64 walks past
the supported_resolution[SYNTHVID_MAX_RESOLUTION_COUNT] array in the
parse loop. Bound resolution_count against the array size, folded
into the existing zero-check.
When the WIN10 resolution probe fails, the caller in
hyperv_connect_vsp() left hv->screen_*_max / preferred_* unpopulated,
which sets mode_config.max_width / max_height to 0 and makes
drm_internal_framebuffer_create() reject every userspace framebuffer
with -EINVAL. The pre-WIN10 branch had the same gap for
preferred_width / preferred_height. Use a single post-probe fallback
guarded by screen_width_max == 0 so both paths converge on the WIN8
defaults. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. If a customer restricts access to the web console by IP address or subnets, the API endpoints are not restricted. If credentials/API keys are known to an attacker, the appliance can still be accessed via the API, leading to a potential compromise of the entire environment that is configured for KACE. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It installs with default user credentials. The report and R1 MySQL accounts have a password of box747, which is publicly known and documented. This allows remote attackers to trivially gain privileged access to the MySQL databases. Sensitive information is stored in the database, such as privileged credentials for other systems. |
| Improper access control in the PAM password history endpoints in Devolutions Server allows an authenticated low-privileged user to disclose plaintext credential secrets via crafted API requests.
This issue affects :
* Devolutions Server 2026.2.4.0 through 2026.2.12.0
* Devolutions Server 2026.1.23.0 and earlier |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: asymmetric_keys - fix OOB read in pefile_digest_pe_contents
pefile_digest_pe_contents() computes the trailing-data hash length as
pelen - (hashed_bytes + certs_size). A crafted PE can make the addition
exceed pelen, causing the unsigned subtraction to underflow to ~4 GiB.
This is passed to crypto_shash_update() which reads out of bounds and
panics on unmapped vmalloc guard pages.
BUG: unable to handle page fault for address: ffffc900038d8000
Oops: Oops: 0000 [#1] SMP KASAN NOPTI
RIP: 0010:sha256_blocks_generic (lib/crypto/sha256.c:152)
Call Trace:
<TASK>
__sha256_update (lib/crypto/sha256.c:208)
crypto_sha256_update (crypto/sha256.c:142)
verify_pefile_signature (crypto/asymmetric_keys/verify_pefile.c:436)
kexec_kernel_verify_pe_sig (kernel/kexec_file.c:151)
__do_sys_kexec_file_load (kernel/kexec_file.c:406)
do_syscall_64 (arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
</TASK>
Kernel panic - not syncing: Fatal exception
Validate that the addition does not overflow and the result does not
exceed pelen before the subtraction. Return -ELIBBAD on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: validate STALE_COOKIE cause length before reading staleness
When an ERROR chunk with a STALE_COOKIE cause is received in the
COOKIE_ECHOED state, sctp_sf_do_5_2_6_stale() reads the 4-byte Measure
of Staleness that follows the cause header:
err = (struct sctp_errhdr *)(chunk->skb->data);
stale = ntohl(*(__be32 *)((u8 *)err + sizeof(*err)));
err is the first cause in the chunk, not the STALE_COOKIE cause that
caused the dispatch, and nothing guarantees the staleness field is
present. sctp_walk_errors() only requires a cause to be as long as the
4-byte header, so for a STALE_COOKIE cause of length 4 the read runs
past the cause, and for a minimal ERROR chunk past skb->tail. The value
is echoed to the peer in the Cookie Preservative of the reply INIT,
leaking uninitialized memory.
sctp_sf_cookie_echoed_err() already walks to the STALE_COOKIE cause, so
check its length there and pass it to sctp_sf_do_5_2_6_stale(), which
reads that cause instead of the first one. A STALE_COOKIE cause too
short to hold the staleness field is discarded.
The read is reachable by any peer that can drive an association into
COOKIE_ECHOED, including an unprivileged process using a raw SCTP socket
in a user and network namespace. |
| A use-after-free issue was addressed with improved memory management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
