| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pm8916_lbc: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: pxafb: Fix possible use after free in pxafb_task()
In the pxafb_probe function, it calls the pxafb_init_fbinfo function,
after which &fbi->task is associated with pxafb_task. Moreover,
within this pxafb_init_fbinfo function, the pxafb_blank function
within the &pxafb_ops struct is capable of scheduling work.
If we remove the module which will call pxafb_remove to make cleanup,
it will call unregister_framebuffer function which can call
do_unregister_framebuffer to free fbi->fb through
put_fb_info(fb_info), while the work mentioned above will be used.
The sequence of operations that may lead to a UAF bug is as follows:
CPU0 CPU1
| pxafb_task
pxafb_remove |
unregister_framebuffer(info) |
do_unregister_framebuffer(fb_info) |
put_fb_info(fb_info) |
// free fbi->fb | set_ctrlr_state(fbi, state)
| __pxafb_lcd_power(fbi, 0)
| fbi->lcd_power(on, &fbi->fb.var)
| //use fbi->fb
Fix it by ensuring that the work is canceled before proceeding
with the cleanup in pxafb_remove.
Note that only root user can remove the driver at runtime. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pf1550: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "hwmon: (ibmpex) fix use-after-free in high/low store"
This reverts commit 6946c726c3f4c36f0f049e6f97e88c510b15f65d.
Jean Delvare points out that the patch does not completely
fix the reported problem, that it in fact introduces a
(new) race condition, and that it may actually not be needed in
the first place.
Various AI reviews agree. Specific and relevant AI feedback:
"
This reordering sets the driver data to NULL before removing the sensor
attributes in the loop below.
ibmpex_show_sensor() retrieves this driver data via dev_get_drvdata() but
does not check if it is NULL before dereferencing it to access
data->sensors[].
If a userspace process reads a sensor file (like temp1_input) while this
delete function is running, could it race with the dev_set_drvdata(...,
NULL) call here and crash in ibmpex_show_sensor()?
Would it be safer to keep the original order where device_remove_file() is
called before clearing the driver data? device_remove_file() should wait
for any active sysfs callbacks to complete, which might already prevent the
use-after-free this patch intends to fix.
"
Revert the offending patch. If it can be shown that the originally reported
alleged race condition does indeed exist, it can always be re-introduced
with a complete fix. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: add missing lock protection in ocelot_port_xmit_inj()
ocelot_port_xmit_inj() calls ocelot_can_inject() and
ocelot_port_inject_frame() without holding the injection group lock.
Both functions contain lockdep_assert_held() for the injection lock,
and the correct caller felix_port_deferred_xmit() properly acquires
the lock using ocelot_lock_inj_grp() before calling these functions.
Add ocelot_lock_inj_grp()/ocelot_unlock_inj_grp() around the register
injection path to fix the missing lock protection. The FDMA path is not
affected as it uses its own locking mechanism. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: pm8916_bms_vm: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: cpcap-battery: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: pm8001: Fix use-after-free in pm8001_queue_command()
Commit e29c47fe8946 ("scsi: pm8001: Simplify pm8001_task_exec()") refactors
pm8001_queue_command(), however it introduces a potential cause of a double
free scenario when it changes the function to return -ENODEV in case of phy
down/device gone state.
In this path, pm8001_queue_command() updates task status and calls
task_done to indicate to upper layer that the task has been handled.
However, this also frees the underlying SAS task. A -ENODEV is then
returned to the caller. When libsas sas_ata_qc_issue() receives this error
value, it assumes the task wasn't handled/queued by LLDD and proceeds to
clean up and free the task again, resulting in a double free.
Since pm8001_queue_command() handles the SAS task in this case, it should
return 0 to the caller indicating that the task has been handled. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix double free issue for tx spare buffer
In hns3_set_ringparam(), a temporary copy (tmp_rings) of the ring structure
is created for rollback. However, the tx_spare pointer in the original
ring handle is incorrectly left pointing to the old backup memory.
Later, if memory allocation fails in hns3_init_all_ring() during the setup,
the error path attempts to free all newly allocated rings. Since tx_spare
contains a stale (non-NULL) pointer from the backup, it is mistaken for
a newly allocated buffer and is erroneously freed, leading to a double-free
of the backup memory.
The root cause is that the tx_spare field was not cleared after its value
was saved in tmp_rings, leaving a dangling pointer.
Fix this by setting tx_spare to NULL in the original ring structure
when the creation of the new `tx_spare` fails. This ensures the
error cleanup path only frees genuinely newly allocated buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: sbs-battery: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. Keep the old behavior of
just printing a warning in case of any failures during the IRQ request
and finishing the probe successfully. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix dirtyclusters double decrement on fs shutdown
fstests test generic/388 occasionally reproduces a warning in
ext4_put_super() associated with the dirty clusters count:
WARNING: CPU: 7 PID: 76064 at fs/ext4/super.c:1324 ext4_put_super+0x48c/0x590 [ext4]
Tracing the failure shows that the warning fires due to an
s_dirtyclusters_counter value of -1. IOW, this appears to be a
spurious decrement as opposed to some sort of leak. Further tracing
of the dirty cluster count deltas and an LLM scan of the resulting
output identified the cause as a double decrement in the error path
between ext4_mb_mark_diskspace_used() and the caller
ext4_mb_new_blocks().
First, note that generic/388 is a shutdown vs. fsstress test and so
produces a random set of operations and shutdown injections. In the
problematic case, the shutdown triggers an error return from the
ext4_handle_dirty_metadata() call(s) made from
ext4_mb_mark_context(). The changed value is non-zero at this point,
so ext4_mb_mark_diskspace_used() does not exit after the error
bubbles up from ext4_mb_mark_context(). Instead, the former
decrements both cluster counters and returns the error up to
ext4_mb_new_blocks(). The latter falls into the !ar->len out path
which decrements the dirty clusters counter a second time, creating
the inconsistency.
To avoid this problem and simplify ownership of the cluster
reservation in this codepath, lift the counter reduction to a single
place in the caller. This makes it more clear that
ext4_mb_new_blocks() is responsible for acquiring cluster
reservation (via ext4_claim_free_clusters()) in the !delalloc case
as well as releasing it, regardless of whether it ends up consumed
or returned due to failure. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: fix use-after-free in caif_serial ldisc_close()
There is a use-after-free bug in caif_serial where handle_tx() may
access ser->tty after the tty has been freed.
The race condition occurs between ldisc_close() and packet transmission:
CPU 0 (close) CPU 1 (xmit)
------------- ------------
ldisc_close()
tty_kref_put(ser->tty)
[tty may be freed here]
<-- race window -->
caif_xmit()
handle_tx()
tty = ser->tty // dangling ptr
tty->ops->write() // UAF!
schedule_work()
ser_release()
unregister_netdevice()
The root cause is that tty_kref_put() is called in ldisc_close() while
the network device is still active and can receive packets.
Since ser and tty have a 1:1 binding relationship with consistent
lifecycles (ser is allocated in ldisc_open and freed in ser_release
via unregister_netdevice, and each ser binds exactly one tty), we can
safely defer the tty reference release to ser_release() where the
network device is unregistered.
Fix this by moving tty_kref_put() from ldisc_close() to ser_release(),
after unregister_netdevice(). This ensures the tty reference is held
as long as the network device exists, preventing the UAF.
Note: We save ser->tty before unregister_netdevice() because ser is
embedded in netdev's private data and will be freed along with netdev
(needs_free_netdev = true).
How to reproduce: Add mdelay(500) at the beginning of ldisc_close()
to widen the race window, then run the reproducer program [1].
Note: There is a separate deadloop issue in handle_tx() when using
PORT_UNKNOWN serial ports (e.g., /dev/ttyS3 in QEMU without proper
serial backend). This deadloop exists even without this patch,
and is likely caused by inconsistency between uart_write_room() and
uart_write() in serial core. It has been addressed in a separate
patch [2].
KASAN report:
==================================================================
BUG: KASAN: slab-use-after-free in handle_tx+0x5d1/0x620
Read of size 1 at addr ffff8881131e1490 by task caif_uaf_trigge/9929
Call Trace:
<TASK>
dump_stack_lvl+0x10e/0x1f0
print_report+0xd0/0x630
kasan_report+0xe4/0x120
handle_tx+0x5d1/0x620
dev_hard_start_xmit+0x9d/0x6c0
__dev_queue_xmit+0x6e2/0x4410
packet_xmit+0x243/0x360
packet_sendmsg+0x26cf/0x5500
__sys_sendto+0x4a3/0x520
__x64_sys_sendto+0xe0/0x1c0
do_syscall_64+0xc9/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f615df2c0d7
Allocated by task 9930:
Freed by task 64:
Last potentially related work creation:
The buggy address belongs to the object at ffff8881131e1000
which belongs to the cache kmalloc-cg-2k of size 2048
The buggy address is located 1168 bytes inside of
freed 2048-byte region [ffff8881131e1000, ffff8881131e1800)
The buggy address belongs to the physical page:
page_owner tracks the page as allocated
page last free pid 9778 tgid 9778 stack trace:
Memory state around the buggy address:
ffff8881131e1380: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff8881131e1480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff8881131e1500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff8881131e1580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
==================================================================
[1]: https://gist.github.com/mrpre/f683f244544f7b11e7fa87df9e6c2eeb
[2]: https://lore.kernel.org/linux-serial/20260204074327.226165-1-jiayuan.chen@linux.dev/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: act8945a: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix use-after-free in arena_vm_close on fork
arena_vm_open() only bumps vml->mmap_count but never registers the
child VMA in arena->vma_list. The vml->vma always points at the
parent VMA, so after parent munmap the pointer dangles. If the child
then calls bpf_arena_free_pages(), zap_pages() reads the stale
vml->vma triggering use-after-free.
Fix this by preventing the arena VMA from being inherited across
fork with VM_DONTCOPY, and preventing VMA splits via the may_split
callback.
Also reject mremap with a .mremap callback returning -EINVAL. A
same-size mremap(MREMAP_FIXED) on the full arena VMA reaches
copy_vma() through the following path:
check_prep_vma() - returns 0 early: new_len == old_len
skips VM_DONTEXPAND check
prep_move_vma() - vm_start == old_addr and
vm_end == old_addr + old_len
so may_split is never called
move_vma()
copy_vma_and_data()
copy_vma()
vm_area_dup() - copies vm_private_data (vml pointer)
vm_ops->open() - bumps vml->mmap_count
vm_ops->mremap() - returns -EINVAL, rollback unmaps new VMA
The refcount ensures the rollback's arena_vm_close does not free
the vml shared with the original VMA. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq25980: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mana_ib: Disable RX steering on RSS QP destroy
When an RSS QP is destroyed (e.g. DPDK exit), mana_ib_destroy_qp_rss()
destroys the RX WQ objects but does not disable vPort RX steering in
firmware. This leaves stale steering configuration that still points to
the destroyed RX objects.
If traffic continues to arrive (e.g. peer VM is still transmitting) and
the VF interface is subsequently brought up (mana_open), the firmware
may deliver completions using stale CQ IDs from the old RX objects.
These CQ IDs can be reused by the ethernet driver for new TX CQs,
causing RX completions to land on TX CQs:
WARNING: mana_poll_tx_cq+0x1b8/0x220 [mana] (is_sq == false)
WARNING: mana_gd_process_eq_events+0x209/0x290 (cq_table lookup fails)
Fix this by disabling vPort RX steering before destroying RX WQ objects.
Note that mana_fence_rqs() cannot be used here because the fence
completion is delivered on the CQ, which is polled by user-mode (e.g.
DPDK) and not visible to the kernel driver.
Refactor the disable logic into a shared mana_disable_vport_rx() in
mana_en, exported for use by mana_ib, replacing the duplicate code.
The ethernet driver's mana_dealloc_queues() is also updated to call
this common function. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: goldfish: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: bq256xx: Fix use-after-free in power_supply_changed()
Using the `devm_` variant for requesting IRQ _before_ the `devm_`
variant for allocating/registering the `power_supply` handle, means that
the `power_supply` handle will be deallocated/unregistered _before_ the
interrupt handler (since `devm_` naturally deallocates in reverse
allocation order). This means that during removal, there is a race
condition where an interrupt can fire just _after_ the `power_supply`
handle has been freed, *but* just _before_ the corresponding
unregistration of the IRQ handler has run.
This will lead to the IRQ handler calling `power_supply_changed()` with
a freed `power_supply` handle. Which usually crashes the system or
otherwise silently corrupts the memory...
Note that there is a similar situation which can also happen during
`probe()`; the possibility of an interrupt firing _before_ registering
the `power_supply` handle. This would then lead to the nasty situation
of using the `power_supply` handle *uninitialized* in
`power_supply_changed()`.
Fix this racy use-after-free by making sure the IRQ is requested _after_
the registration of the `power_supply` handle. |
| Memory safety bugs present in Firefox ESR 115.34, Firefox ESR 140.9, Thunderbird ESR 140.9, Firefox 149 and Thunderbird 149. Some of these bugs showed evidence of memory corruption and we presume that with enough effort some of these could have been exploited to run arbitrary code. This vulnerability was fixed in Firefox 150, Firefox ESR 115.35, Firefox ESR 140.10, Thunderbird 150, and Thunderbird 140.10. |
